RESUMEN

OBJECTIVES: To assess the accuracy and effectiveness among operators with different levels of experience in a robot-assisted immediate implant surgery. MATERIALS AND METHODS: The study included four participants who had received dental training at the same institution but have varying levels of clinical experience in implant dentistry, denoted as undergraduate student (UG), dental resident (DR), specialist with no robot experience (IS) and specialist with robot experience (RS). Following comprehensive theoretical training in robot-assisted implant operation, each operator participated in five robotic-assisted implant procedures at 21 sites, resulting in the implant surgery of a total of 20 implants. Subsequently, the accuracy of the implants was assessed by analyzing the preoperative planning and the postoperative CBCT scans, and the time required for each procedure was also recorded. RESULTS: Angular deviation in UG, DR, IS and RS group was 0.82 ± 0.27°, 0.55 ± 0.27°, 0.83 ± 0.27°, and 0.56 ± 0.36°, respectively. The total deviation of the implant platform point was 0.28 ± 0.10 mm, 0.26 ± 0.16 mm, 0.34 ± 0.08 mm and 0.31 ± 0.06 mm, respectively. The total deviation of the apical point was 0.30 ± 0.08 mm, 0.25 ± 0.18 mm, 0.31 ± 0.09 mm, and 0.31 ± 0.05 mm, respectively. The time spent was 10.37 ± 0.57 min, 10.56 ± 1.77 min, 9.93 ± 0.78 min, and 11.76 ± 0.78 min for each operator. As the number of operations increased, the operation time decreased, but there was no significant difference in implant accuracy between the different groups. CONCLUSIONS: Within the scope of this study, robot-assisted implant surgery demonstrated high accuracy, with no significant differences in performance between operators with varying levels of clinical experience or implant robot-user experience. Furthermore, the learning curve for robotic implant surgery is steep and consistent. CLINICAL RELEVANCE: Robot-assisted implant surgery demonstrates consistent high accuracy across operators of varying clinical and robotic experience levels, highlighting its potential to standardize procedures and enhance predictability in clinical outcomes.

Asunto(s)

RESUMEN

Robotic devices have recently enhanced cochlear implantation by improving precision resulting in reduced intracochlear damage during electrode insertion. This study aimed to gain first insights into the expected dimensions of the cone-like workspace from the posterior tympanotomy towards the round window membrane. This retrospective chart review analyzed ten postoperative CT scans of adult patients who were implanted with a CI in the past ten years. The dimensions of the cone-like workspace were determined using four landmarks (P1-P4). In the anteroposterior range, P1 and P2 were defined on the edge of the bony layer over the facial nerve and chorda tympani nerve, respectively. In the inferosuperior range, P3 was defined on the bony edge of the incus buttress and P4 was obtained at a distance of 0.45 mm between the facial nerve and the chorda tympani nerve. After selecting the landmarks, the calculations of the dimensions of the surgical access space were done in a standardized coordinate system and presented using descriptive statistics. The cone-like space is limited by two maximal angles, α and ß. The average angle α of 19.84 (±3.55) degrees defines the angle towards the round window membrane between P1 and P2. The second average angle ß of 53.56 (±10.29) degrees defines the angle towards the round window membrane between P3 and P4. Based on the angles the mean anteroposterior range of 2.25 (±0.42) mm and mean inferosuperior range of 6.73 (±2.42) mm. The distance from the posterior tympanotomy to the round window membrane was estimated at 6.05 (±0.71) mm. These findings present data on the hypothetical maximum workspace in which a future robotically steered insertion tool can be positioned for an optimal automated electrode insertion. A larger sample size is necessary before generalizing these dimensions to a population. Further research including preoperative CT scans is needed for planning robotic-steered cochlear implantation.

RESUMEN

OBJECTIVE: To describe and evaluate a modified cochlear implant surgical procedure for patients with a thick musculocutaneous flap. MATERIALS AND METHODS: A prospective study for cochlear implant surgery in selected patients with a musculocutaneous flap thicker than 7 mm. RESULTS: Fourteen patients with a thick scalp flap underwent cochlear implantation between July 2019 and December 2020. The patient age ranged between 17 and 53 years. The flap thickness was between 7 mm and 14 mm. The mean follow uptime post operatively was 16.5 months. The cochlear implant receiver coil was successfully implanted using the transmuscular technique without complications and with normal audiological function. CONCLUSION: The transmuscular pocket modified technique is a safe and effective method to overcome a thick musculocutaneous flap in cochlear implant surgery.

RESUMEN

BACKGROUND: A clinical trial was conducted to measure the effectiveness of a combined wavelength of 660 nm and 808 nm Low-Level Laser Therapy (LLLT) in reducing postoperative pain in partially and totally edentulous patients who underwent dental implant surgery. MATERIALS AND METHODS: The study included 20 blinded individuals divided in a randomized split-mouth fashion; the experimental group in one hemiarch and the control group in the other hemiarch. The experimental group received a total of 22.5 Joules (J) of LLLT divided into 5 points per implant immediately after surgery. The control group received a placebo treatment. At 24 h, 72 h, and 7 days, a blinded surveyor administered a pain questionnaire using a Numerical Rating Scale (NRS) combined with a Verbal Rating Scale (VRS) to assess pain onset after surgery, duration of the first pain episode, and pain evolution. Group data were analyzed with an ANOVA test for repeated measures and a paired t-test at defined time intervals. RESULTS: The experimental group showed a significant decrease in postoperative pain at 24 h and at 72 h for fully edentulous patients. There was a non-significant difference in the duration of the first pain episode. The mean pain levels decreased over time for both the experimental and control treatments, but only statistically significantly for the experimental group in the 24-72 h and 24 h to 7 days intervals. The same was true for the control group when comparing 24 and 72 h and between 24 h and 1 week. The time range between 72 h and 1 week showed no statistically significant differences. CONCLUSION: Within the limitations of this study, a single dose of 22.5 J LLLT per implant helps to decrease postoperative pain in dental implant surgery at 24 h for partially edentulous patients and at 24 and 72 h for fully edentulous patients.

RESUMEN

Odontogenic sinusitis (ODS) is more common than historically thought, representing 25% to 40% of all maxillary sinusitis. Due to a lack of widely accepted diagnostic criteria and a specific international diagnostic code, a true overall prevalence is unknown. ODS may be caused by either a multitude of infectious dental pathologies or complications after dental procedures. The most common dental etiologies causing ODS are apical periodontitis (endodontic) and oroantral communication or fistula after dental extraction. Less commonly, ODS can evolve after dental implant or maxillary sinus bone grafting surgeries, infection of odontogenic cysts, or advanced periodontitis.

RESUMEN

Background: Highly prevalent tooth loss is observed among populations around the world. To restore masticatory function and satisfactory aesthetics, missing teeth must be replaced. Dental implants are increasingly used for this purpose. This study aimed to assess periodontal patients' knowledge and attitudes towards dental implants. Methods: 467 anonymous questionnaires of periodontal patients were analyzed. The population participants were divided according to gender, age, education and place of residence. In the statistical analysis, the chi-squared test of independence was used (p < 0.05). The main questions addressed patients' knowledge about dental implants and the factors influencing their decision to undergo implantation. Results: The majority of periodontal patients were aware of dental implants and the importance of oral hygiene in their maintenance. However, the population studied had many knowledge deficits, especially on the technical and biological aspects of implants. The lack of knowledge about peri-implantitis was surprising in the group seeking professional periodontal care. Patients obtained information mainly from the internet and from family and friends, with their dentists being the third source. Good functional and aesthetic outcomes would encourage them to undergo the implantation procedure, and high cost and the possibility of complications were the most discouraging factors. Conclusions: Given the growing popularity of implant treatment, patients should be provided with evidence-based knowledge about indications and possible contraindications to implants to make informed decisions.

RESUMEN

INTRODUCTION: Preserving the cochlear structures and thus hearing preservation, has become a prominent topic of discussion in cochlear implant (CI) surgery. Various approaches and soft surgical techniques have been described when approaching the inner ear. Robot-assisted cochlear implant surgery (RACIS) reaches the round window in a minimally invasive manner by following a trajectory of minimal trauma. This involves the drilling of a keyhole trajectory to the round window, through the facial recess, with no need for a complete mastoidectomy. It involves less drilling, less drilling time and less structural damage. A lot of attention has been paid to the structural traumatic causes of hearing loss but acoustic trauma during the exposure of the inner ear appears to be neglected topic. AIM: The aim was to measure the noise exposure of the inner ear during the robotic drilling of the mastoid and bony overhang of the round window. The results were compared with the milling in conventional cochlear implantation surgery. INTERVENTION: RACIS on fresh frozen human cadavers. OUTCOME MEASUREMENTS: The equivalent frequency-weighted and time-averaged sound pressure level LAF in dB and the noise dose in % derived from a noise damage model, both obtained during RACIS. MATERIALS AND METHODS: The robotic drilling of 6 trajectories towards the inner ear were performed, including 4 trajectories through round window access and 2 trajectories through cochleostomy. The results were compared with the data of 7 cases of conventional CI surgery that have been described in literature. The induced equivalent sound pressure level LAF was determined via an accelleration sensor at the zygomatic arch and a calibration according to bone conduction audiometry. A noise dose for the whole procedure was calculated from the equivalent sound pressure level LAF and the exposure time using a noise damage model. A noise dose of 100% is considered a critical exposure limit and values above are considered potentially harmful, with the risk of hearing impairment. RESULTS: The maximum LAF was 82 dB during fiducial screw placement; 87 dB during middle ear access; 95 dB for the accesses through the round window and 88 dB for the accesses through cochleostomy. The noise dose due to the HEARO®-procedure was always far below the critical value of 100%. There was no acoustic trauma of the inner ear in all cases with the noise dose being smaller than 0.1% in five out of the six cases. The maximum LAF in the seven cases of conventional CI surgery was 118 dB with a maximum cumulative noise dose of 172.6%. The critical exposure limit of 100% was exceeded in three cases of conventional CI surgery. CONCLUSION: RACIS provokes significantly less acoustic trauma than conventional mastoid surgery in our findings. There were no observable differences in noise exposure levels between a cochleostomy or a round window approach where the bony overhang needed to be drilled.

RESUMEN

OBJECTIVES: Proper electrode placement is essential for favorable hearing outcomes following cochlear implantation. Though often used, traditional intraoperative X-ray imaging is time consuming, exposes patients and staff to radiation, and poses interpretational challenges. The Nucleus® SmartNav System, utilizes electrode voltage telemetry (EVT) to analyze the positioning of the electrode array intraoperatively. This study investigates the efficacy of SmartNav in optimizing the efficiency and accuracy of assessing electrode placement. METHODS: This prospective clinical study analyzed placement of 50 consecutive Cochlear Corporation cochlear implants conducted at a single institution between March of 2022 and June of 2023. Placement check of electrode array using SmartNav and X-ray was completed and individually assessed. A comparative analysis of SmartNav and X-ray completion times for electrode placement assessment was conducted. RESULTS: Subjects included nine ears with abnormal anatomy and three reimplants. SmartNav placement check required a total time of 2.12 min compared to X-ray imaging at 14.23 min (p = 1.6E-16, CI 95%). Both SmartNav and X-ray had excellent sensitivity of 100% in identifying appropriate electrode position (p = 1.0). Tip fold-over was identified using both modalities in 3 cases with noted easier interpretation using SmartNav. CONCLUSION: The Nucleus® SmartNav System significantly outperformed traditional X-ray imaging, offering a faster and more straightforward approach to assessing electrode positioning during cochlear implant surgery, thereby enhancing surgical efficiency and patient safety.

RESUMEN

OBJECTIVES: To investigate the accuracy of immediate anterior implantation using static computer-assisted implant surgery (s-CAIS) and robotic computer-assisted implant surgery (r-CAIS). MATERIALS AND METHODS: One hundred and six implants were immediately inserted in the anterior zone of 69 patients using a freehand technique, s-CAIS or r-CAIS. Postoperative cone-beam computed tomography scans were matched with preoperative plans to evaluate the deviations between the planned and placed implant positions. RESULTS: The global coronal deviations in the freehand, s-CAIS, and r-CAIS groups were 1.29 ± 0.52 mm, 1.01 ± 0.41 mm, and 0.62 ± 0.28 mm, respectively. Significant differences were observed in the r-CAIS group compared to both the s-CAIS group and the freehand group (p < 0.05). However, no significant differences were found between the s-CAIS group and the freehand group (p > 0.05). The global apical deviations in the freehand, s-CAIS and r-CAIS groups were 1.78 ± 0.59 mm, 1.24 ± 0.52 mm and 0.65 ± 0.27 mm, respectively, while the angular deviations in the freehand, s-CAIS and r-CAIS groups were 6.46 ± 2.21°, 2.94 ± 1.71° and 1.46 ± 0.57°, respectively. Significant differences were observed in both the global apical deviations and angular deviations among the three groups (p < 0.05). CONCLUSIONS: The accuracy of immediate anterior implantation with r-CAIS was better than that with s-CAIS. This difference is attributed to better control of the coronal, vertical and axial errors during r-CAIS. CLINICAL SIGNIFICANCE: This study provides significant evidence to support the use of r-CAIS as a potential alternative in immediate anterior implantation.

Asunto(s)

RESUMEN

OBJECTIVES: The aim of this study was to assess the accuracy of surgical guides manufactured with four different 3D printers.. METHODS: Forty-eight surgical guides (BlueSky Plan, BlueSky Bio) were produced using four different 3D printers, with strict adherence to each manufacturer's instructions. The printers used were three digital light processing (DLP) printers (SolFlex170, VC; Nextdent5100, ND, and D30+Rapidshape, RS) and one stereolithographic (SLA) printer (Formlabs3B+, FL). The study evaluated the trueness and precision of the overall surface, the region of interest (RoI) (occlusal and guide zone), the repeatability in several batches, and the guide hole's diameter and xyz axes. The printed guides were digitized and compared with the CAD design control specimen (Control X, Geomagic). Descriptive statistics and Kruskal-Wallis tests with post-hoc Mann-Whitney tests were performed (α=0.05). RESULTS: Differences in trueness and precision were found between groups in the overall zone and RoI (p = 0.00). The ND group demonstrated the highest repeatability. Only the RS group exhibited a comparable guide hole diameter to the master specimen (5.27±2.12 mm; p = 0.104). No statistical differences were observed between groups in the x and z axes. However, in the y-axis, the VC group displayed statistically significant differences (p = 0.01). CONCLUSIONS: The results showed that the DLP groups had better overall accuracy, while the SLA group had the best results in the RoI. The manufacturer's workflows demonstrated a high reproducibility between batches in the RoI. The RS group had values most similar values to the guide hole diameter of the master specimen, with minimal deviations in guide hole orientation. CLINICAL SIGNIFICANCE: Implant position can be affected by the accuracy of the 3D printed surgical guide. Therefore, it is critical to analyze the final dimensions and the direction of the guide hole using available printing technologies.

Asunto(s)

RESUMEN

OBJECTIVE: To assess the relative position of mini-implants to retain a mandibular overdenture, according to the surgical protocol, technical and anatomical factors. METHODS: Mandibular cone-beam computed tomography (CBCT) scans were analyzed for 73 patients who received four one-piece titanium-zirconium mini-implants. Drilling was performed using a 1.6 mm needle drill and a 2.2 mm Pilot Drill, according to the bone density with a surgical stent. Post-insertion CBCT images in DICOM format were analyzed using the E-Vol-DX software with BAR filters. Divergence angle between implants and between implants and the overdenture path of insertion was measured using CliniView 10.2.6 software. RESULTS: Divergence between implants ranged from 0° to 22.3° (mean = 4.2; SD = 3.7) in the lateral and from 0° to 26.2° (mean = 5.3; SD = 4.1) in the frontal projections (p < .001). Only 1 (0.2%) and 3 (0.7%) of the measurements were higher than 20° in the lateral and frontal views, respectively. The mean angulations between the implant and the path of insertion for the overdenture were 9.3° (SD = 7.5) and 4.0° (SD = 2.9) for the lateral and frontal views, respectively (p < .001). Regression analyses showed a significant association between the divergence of implants and the frontal view projection (p < .001), greater distance between the paired implants (p = .017), the flapped surgical protocol (p = .002), higher final insertion torque (p = .011), and deeper preparation with the needle drill (p < .001). CONCLUSIONS: The mini-implants were placed with low divergence angles and satisfactory parallelism. Factors including shorter distances between the implants, higher density bone, and a flapless surgical approach all contributed positively to improved parallelism of the mini-implants.

RESUMEN

PURPOSE: This systematic review and meta-analysis aimed to evaluate the depth distortion and angular deviation of fully-guided tooth-supported static surgical guides (FTSG) in partially edentulous arches compared to partially guided surgical guides or freehand. MATERIAL AND METHODS: This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and was registered in the Open Science Framework (OSF). The formulated population, intervention, comparison, and outcome (PICO) question was: "In partially edentulous arches, what are the depth distortion and angular deviation of FTSG compared to partially guided surgical guides or freehand?" The search strategy involved four main electronic databases, and an additional manual search was completed in November 2023 by following an established search strategy. Initial inclusion was based on titles and abstracts, followed by a detailed review of selected studies, and clinical studies that evaluated the angular deviations or depth distortion in FTSG in partial arches, compared to partially guided surgical guides or freehand, were included. In FTSG, two surgical approaches were compared: open flap and flapless techniques, and two digital methods were assessed for surgical guide design with fiducial markers or dental surfaces. A qualitative analysis for clinical studies was used to assess the risk of bias. The certainty of the evidence was assessed according to the grading of recommendations, assessment, development, and evaluations (GRADE) system. In addition, a single-arm meta-analysis of proportion was performed to evaluate the angular deviation of freehand and FTSG. RESULTS: Ten studies, published between 2018 and 2023, met the eligibility criteria. Among them, 10 studies reported angular deviations ranging from -0.32° to 4.96° for FTSG. Regarding FTSG surgical approaches, seven studies examined the open flap technique for FTSG, reporting mean angular deviations ranging from 2.03° to 4.23°, and four studies evaluated flapless FTSG, reporting angular deviations ranging from -0.32° to 3.38°. Six studies assessed the freehand surgical approach, reporting angular deviations ranging from 1.40° to 7.36°. The mean depth distortion ranged between 0.19 mm to 2.05 mm for open flap FTSG, and between 0.15 mm to 0.45 mm for flapless FTSG. For partially guided surgical guides, two studies reported angular deviations ranging from 0.59° to 3.44°. Seven studies were eligible for meta-analysis, focusing on the FTSG in open flap technique, with high heterogeneity (I2 (95%CI) = 92.3% (88.7%-96.4%)). In contrast, heterogeneity was low in studies comparing freehand versus FTSG in open flap techniques (I2 (95%CI) = 21.3% (0.0%-67.8%)), favoring the FTSG surgical approach. CONCLUSION: In partially edentulous arches, FTSG systems exhibited less angular deviation than freehand and partially guided surgical guides. Flapless surgical approaches were associated with reduced angular deviation and depth distortion, suggesting a potential preference for the FTSG method in these procedures.

RESUMEN

Introduction There is general agreement that a thick zone of the keratinized tissues around implants promotes accurate prosthetic procedures, permits oral hygiene maintenance, resists recession, and enables esthetic blending with surrounding tissues. A new procedure called Choukroun's technique has been suggested, and it consists of a combination of horizontal apical mattress suture with regular suture to increase the keratinized tissue in the mandibular arch during the first stage after implantation. The proposed procedure has not been evaluated yet in a cohort of patients. Therefore, this prospective study aimed to evaluate the impact of Choukroun's technique on the width and thickness of the keratinized gingiva after oral surgery. Materials and methods A one-group prospective cohort study was conducted on patients referred to the Department of Oral and Maxillofacial Surgery at the Dental College of Al-Wataniya Private University who had been referred to undergo dental implant surgery. The inclusion criteria for the study group were as follows: patients with mandibular missing teeth, good oral health, good general health, 18-70 years old, at least 1 mm thickness of keratinized gingiva, and at least 1 mm width of the attached gingiva. A total of 14 patients aged 27-67 years were included in the study. After inserting the dental implants, the suturing was accomplished according to Choukroun's method. The width and thickness of the keratinized gingiva were assessed before surgery and at one and two months post-surgery. Repeated measures analysis of variance (ANOVA) was applied to detect significant differences between assessment times. Results The study sample comprised 14 patients, of which four were females (28.6%) and 10 were males (71.4%). Patients' ages ranged from 27 to 67 years, with a mean age of 54.86 ± 11.73 years. The surgical procedure was performed in three different regions: the upper posterior teeth with four patients (28.6%), the upper anterior teeth with three patients (21.4%), and the lower posterior teeth with seven patients (50%). The mean gingival width before surgery was 5.78 mm, whereas the mean gingival thickness was 2.82 mm. There was no significant difference between the three evaluation times in the mean gingival width (P=0.222), and there was a significant difference between the three evaluation times in the mean gingival thickness (P<0.001). The mean mean gingival thickness one month after surgery was significantly greater than its mean value before surgery (mean difference: 0.749 mm). Additionally, the mean gingival thickness two months after surgery was significantly greater than its mean value before (mean differences: 0.636 mm). Conclusions Using horizontal apical mattress sutures (Choukroun's technique) does not provide any advantage in increasing the width of the keratinized gingiva. However, it does lead to an increase in the thickness of keratinized gingiva in the surgical area. Therefore, the use of horizontal apical mattress sutures is recommended.

RESUMEN

OBJECTIVES: To present the first clinical application of a novel mixed reality-based dynamic navigation (MR-DN) system in the rehabilitation of a single tooth gap. METHODS: The protocol consisted of the following: (1) three-dimensional patient data acquisition using intraoral scanning (IOS) and cone-beam computed tomography (CBCT), (2) implant planning using guided surgery software, (3) holography-guided implant placement using the novel MR-DN system (ANNA®, MARS Dental, Haifa, Israel) and (4) placement accuracy verification. RESULTS: The novel MR-DN system was safe and time-efficient, as the surgery took 30 min from anaesthesia to suturing. The accuracy of implant placement was high with minimal deviations recorded in the three planes of space compared to the presurgical planning: the error at the entry point planar distance (XY) was 0.381 mm, and the entry point planar distance (Z) was 0.173 mm, for a 3D entry point distance (En) of 0.417 mm. A 3D apex deviation (An) of 0.193 mm was registered, with an angle difference of 1.852° Conclusions: This proof-of-concept study demonstrated the clinical feasibility of MR-DN for guided implant placement in single tooth gaps. Further clinical studies on a large sample of patients are needed to confirm these positive preliminary results. Statement of clinical relevance: The use of MR-DN can change the perspectives of guided dental implant surgery as a possible alternative to the classic static and dynamic guided surgical techniques for the rehabilitation of single tooth gaps.

Asunto(s)

RESUMEN

Breast implant insertion for breast reconstruction or breast augmentation is a developing procedure, with high demand worldwide-being the second most common plastic surgery in the US as of 2022. Breast-implant-associated anaplastic large cell lymphoma (BIA-ALCL) is T-cell, non-Hodgkin lymphoma, typically CD30+, ALK-, presenting with fluid collection in the inner aspect of the peri-implant capsule in most patients, with the onset exceeding 1-year after implantation. The mean time between breast implant insertion and BIA-ALCL development is 7-10 years. The main risk factor is the use of textured implants because of their susceptibility to triggering local inflammation and immune stimulation finally leading to lymphoproliferation. Genetic predispositions to hereditary breast cancer increase the risk of disease development as well. BIA-ALCL seems to be underestimated in many countries and the initial symptom-seroma might be overlooked and misdiagnosed. Despite its rarity, the awareness of the disease should be improved among patients and medical professionals. This paper summarizes epidemiology, etiopathogenesis, differential diagnosis, and treatment-both surgical and hematological approaches.

Asunto(s)

RESUMEN

BACKGROUND: Minimally invasive cochlear implant surgery by using a microstereotactic frame demands solid connection to the bone. We aimed to determine the stability of commercially available orthodontic miniscrews to evaluate their feasibility for frame's fixation. In addition, which substitute material most closely resembles the mechanical properties of the human temporal bone was evaluated. METHODS: Pull-out tests were carried out with five different types of orthodontic miniscrews in human temporal bone specimens. Furthermore, short fiber filled epoxy (SFFE), solid rigid polyurethane (SRPU50), bovine femur, and porcine iliac bone were evaluated as substitute materials. In total, 57 tests in human specimens and 180 tests in the substitute materials were performed. RESULTS: In human temporal bone, average pull-out forces ranged from 220 N to 285 N between screws. Joint stiffness in human temporal bone ranged between 14 N/mm and 358 N/mm. Statistically significant differences between the tested screws were measured in terms of stiffness and elastic energy. One screw type failed insertion due to tip breakage. No significant differences occurred between screws in maximum pull-out force. The average pull-out values of SFFE were 14.1 N higher compared to human specimen. CONCLUSION: Orthodontic miniscrews provided rigid fixation when partially inserted in human temporal bone, as evidenced by pull-out forces and joint stiffness. Average values exceeded requirements despite variations between screws. Differences in stiffness and elastic energy indicate screw-specific interface mechanics. With proper insertion, orthodontic miniscrews appear suitable for microstereotactic frame anchoring during minimally invasive cochlear implant surgery. However, testing under more complex loading is needed to better predict clinical performance. For further pull-out tests, the most suitable substitute material is SFFE.

Asunto(s)

RESUMEN

OBJECTIVES: To investigate the accuracy of conventional and automatic artificial intelligence (AI)-based registration of cone-beam computed tomography (CBCT) with intraoral scans and to evaluate the impact of user's experience, restoration artifact, number of missing teeth, and free-ended edentulous area. MATERIALS AND METHODS: Three initial registrations were performed for each of the 150 randomly selected patients, in an implant planning software: one from an experienced user, one from an inexperienced operator, and one from a randomly selected post-graduate student of implant dentistry. Six more registrations were performed for each dataset by the experienced clinician: implementing a manual or an automatic refinement, selecting 3 small or 3 large in-diameter surface areas and using multiple small or multiple large in-diameter surface areas. Finally, an automatic AI-driven registration was performed, using the AI tools that were integrated into the utilized implant planning software. The accuracy between each type of registration was measured using linear measurements between anatomical landmarks in metrology software. RESULTS: Fully automatic-based AI registration was not significantly different from the conventional methods tested for patients without restorations. In the presence of multiple restoration artifacts, user's experience was important for an accurate registration. Registrations' accuracy was affected by the number of free-ended edentulous areas, but not by the absolute number of missing teeth (p < .0083). CONCLUSIONS: In the absence of imaging artifacts, automated AI-based registration of CBCT data and model scan data can be as accurate as conventional superimposition methods. The number and size of selected superimposition areas should be individually chosen depending on each clinical situation.

RESUMEN

AIM: The aim of this work is to present a new protocol for implant surgical planning which involves the combined use of artificial intelligence (AI) and mixed reality (MR). METHODS: This protocol involves the acquisition of three-dimensional (3D) patient data through intraoral scanning (IOS) and cone beam computed tomography (CBCT). These data are loaded into AI software which automatically segments and aligns the patient's 3D models. These 3D models are loaded into MR software and used for planning implant surgery through holography. The files are then exported and used to design surgical guides via open-source software, which are 3D printed and used to prepare the implant sites through static computer-assisted implant surgery (s-CAIS). The case is finalized prosthetically through a fully digital protocol. The accuracy of implant positioning is verified by comparing the planned position with the actual position of the implants after surgery. RESULTS: As a proof of principle, the present protocol seems to be to be reliable and efficient when used for planning simple cases of s-CAIS in partially edentulous patients. The clinician can plan the implants in an authentic 3D environment without using any radiology-guided surgery software. The precision of implant placement seems clinically acceptable, with minor deviations. CONCLUSIONS: The present study suggests that AI and MR technologies can be successfully used in s-CAIS for an authentic 3D planning. Further clinical studies are needed to validate this protocol.

RESUMEN

CT-guided surgery has demonstrated superior accuracy over traditional methods in the dental literature. However, inherent errors such as discrepancies between jaw dimensions in scans and reality can challenge the fabrication of screw-retained provisional restorations. These discrepancies can impede final restoration fabrication. Traditional immediate loading of edentulous jaws using temporary cylinders in existing dentures often requires time-consuming abutment positioning and drilling. Many articles addressed these issues through minimally invasive implant placement with immediate loading, achieved through careful preoperative planning and exact prosthetic techniques. CT-guided surgery facilitates minimally invasive procedures and immediate restoration of edentulous jaws, resulting in reduced morbidity and quicker, more precise outcomes. This case report illustrates how digital dentistry enhances implant placement precision and reliability. It involves using a lock object system between the surgical guide and provisional restoration, streamlining the process. A 59-year-old male with significant periodontal issues and non-restorable teeth was treated with implant-supported fixed prostheses using digital planning and computer-fabricated surgical guides. The plan included immediate loading with mechanical and magnetic locks for optimal outcomes. The patient received complete fixed provisional restorations on both arches through minimally invasive procedures. Digital dentistry facilitated precise implant placement and restoration, improving function, esthetics, and patient satisfaction. Digital technologies streamlined the process, reducing time and enhancing predictability and reproducibility. In conclusion, integrating digital dentistry into implant treatment planning and execution offers enhanced accuracy, efficiency, and patient outcomes. By utilizing digital technologies and innovative methods, clinicians can attain consistent and reliable outcomes, thereby enhancing the quality of care for patients undergoing implant therapy.

RESUMEN

Three-dimensional (3D) printing is an emerging manufacturing technology in dentistry with a range of applications. Digital dentistry presented in cone beam CT scan radiographs is a revolution that improved surgical outcomes by optimizing accurate diagnosis and analysis of the surgical sites before surgery. A periodontist can modify the treatment plan, surgical techniques, and incision design based on bone defects seen on cone beam CT scans. Block grafting has been a technique of choice when wound stability is required for guided bone regeneration. There was no significant difference between the different surgical procedures for reconstruction and choice should be given to the simpler and less invasive procedure. A xenograft or allograft block can work as an alternative to the autogenous bone block to reduce the surgery time and patient morbidity. Preparation and shaping of block graft during surgery time to match the defect shape can prolong the operative time, reduce the treatment success, and increase postoperative complications. In this case report, a sterilized 3D-printed mandibular jaw was utilized to visualize the defect size and shape. A bovine xenograft block was then prepared, shaped, and adapted on the 3D-printed jaw 30 minutes before the surgery. The block graft was then transferred and well-fitted on the surgical defect. Handling experience was greater and surgery time and postoperative pain were reduced.