RESUMEN

Amorphous silica particles (ASPs) have been reported to exhibit bioactive properties and are becoming the focus of attention as bioceramics. However, their interactions with proteins in living organisms remain to be understood and need to be investigated in order to achieve wider applications. Our research group found that chlorine (Cl)-containing ASPs are useful for protein immobilization. Photofunctional dyes (fluorescein (FS-), methylene blue (MB+)) that have the carboxy and amino groups as the main functional groups were immobilized on the Cl-containing ASPs via the mechanochemical method as the model molecule and their spectral properties were used to investigate and discuss the organic/inorganic interfacial bonding states. In FS-, the oxygen atoms of the carboxy groups in the molecule were immobilized by the hydrogen bonds with the silanol groups on the ASPs surfaces, indicating that there is an optimum Cl content for the immobilization as the monomer state. In the case of MB+, as the Cl concentration in the ASPs increases, the immobilization via the electrostatic interactions between the Cl in the ASPs and the terminal dimethylamino group, and the hydrogen bonding between the N atoms of the MB+ hetero ring and the particle silanol group were enhanced. These results mainly suggest that the protein adsorption system occurs through the hydrogen bonding between the carboxy groups of the protein and the silanol groups on the particles and via electrostatic interactions between the amino groups of the protein and the dissociated silanol groups and the contained Cl at the particles. Thus, the spectral characterization using dyes as probes is expected to predict the protein interactions with the amorphous silica particles.

RESUMEN

Microbial lipase is looking for better attention with the fast growth of enzyme proficiency and other benefits like easy, cost-effective, and reliable manufacturing. Immobilized enzymes can be used repetitively and are incapable to catalyze the reactions in the system continuously. Hydrophobic supports are utilized to immobilize enzymes when the ionic strength is low. This approach allows for the immobilization, purification, stability, and hyperactivation of lipases in a single step. The diffusion of the substrate is more advantageous on hydrophobic supports than on hydrophilic supports in the carrier. These approaches are critical to the immobilization performance of the enzyme. For enzyme immobilization, synthesis provides a higher pH value as well as greater heat stability. Using a mixture of immobilization methods, the binding force between enzymes and the support rises, reducing enzyme leakage. Lipase adsorption produces interfacial activation when it is immobilized on hydrophobic support. As a result, in the immobilization process, this procedure is primarily used for a variety of industrial applications. Microbial sources, immobilization techniques, and industrial applications in the fields of food, flavor, detergent, paper and pulp, pharmaceuticals, biodiesel, derivatives of esters and amino groups, agrochemicals, biosensor applications, cosmetics, perfumery, and bioremediation are all discussed in this review.

Asunto(s)

RESUMEN

Unspecific peroxygenases (UPOs) are among the most studied enzymes in the last decade and their well-deserved fame owes to the enzyme's ability of catalyzing the regio- and stereospecific hydroxylation of non-activated C-H bonds at the only expense of H2O2. This leads to more direct routes for the synthesis of different chiral compounds as well as to easier oxyfunctionalization of complex molecules. Unfortunately, due to the high sensitivity towards the process conditions, UPOs' application at industrial level has been hampered until now. However, this challenge can be overcome by enzyme immobilization, a valid strategy that has been proven to give several benefits. Within this article, we present three different immobilization procedures suitable for UPOs and two of them led to very promising results. The immobilized enzyme, indeed, shows longer stability and increased robustness to reaction conditions. The immobilized enzyme half-life time is 15-fold higher than for the free AaeUPO PaDa-I and no enzyme deactivation occurred when incubated in organic media for 120 h. Moreover, AaeUPO PaDa-I is proved to be recycled and reused up to 7 times when immobilized.

RESUMEN

Because of their unique physical, chemical, and biological characteristics, conductive nanomaterials have a lot of potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and other fields. Recent breakthroughs in the manufacture of carbon materials, conductive polymers, metals, and metal oxide nanoparticles based electrochemical sensors and biosensors for applications in environmental monitoring by detection of catechol (CC) and hydroquinone (HQ) are presented in this review. To achieve this goal, we first introduced recent works that discuss the effects of phenolic compounds and the need for accurate, inexpensive, and quick monitoring, and then we focused on the use of the most important applications of nanomaterials, such as carbon-based materials, metals, and metal oxides nanoparticles, and conductive polymers, to develop sensors to monitor catechol and hydroquinone. Finally, we identified challenges and limits in the field of sensors and biosensors, as well as possibilities and recommendations for developing the field for better future applications. Meanwhile, electrochemical sensors and biosensors for catechol and hydroquinone measurement and monitoring were highlighted and discussed particularly. This review, we feel, will aid in the promotion of nanomaterials for the development of innovative electrical sensors and nanodevices for environmental monitoring.

Research HighlightsThe most commonly used procedures to prepare electroechemical sensors for catechol and hydroquinone monitoring are described.The electroanalytical techniques have been compared and evaluated.The essential carbon based materials used to fabricate sensitive and selective electrodes are discussed.Prominent applications of nanomaterials combinations for electrochemical sensors are presented.The potential of novel green synthesis procedures for the future development of electrochemical sensors is outlined.

RESUMEN

Background and Objectives: Cell-immobilization is used to maintain microbial culture to produce metabolites in repeated-batch or continuous fermentations, thereby reducing the time and resources spent on delivering mass production of microbe. The technique also enables shortening of the detoxification phase and the amount of formaldehyde required due to low incidence of viable bacteria in the extract. Materials and Methods: A solution of sodium alginate containing Clostridium perfringens cells was dropped into stirring CaCl solution via a sterile syringe needle. Optimizations resulted in reasonably uniform beads containing C. perfringens. Beads were externally stabilized by poly L-lysine, followed by immersion in a solution of Na-alginate to coat them with a new layer of alginate forming an alginate-PLL-alginate cortex. Results: This study proved successful in immobilizing C. perfringens cells inside uniform alginate microspheres. Cell loading and cell propagation inside the beads were measured. The cell loaded beads were cultivable in liquid media producing 550 minimum lethal doses per milliliter (MLD/ml) in a 72 h. Conclusion: The research paved the way for further investigations to optimize and establish an efficient bacterial encapsulation method. Thus, it seems possible to produce toxins from beads engulfing C. perfringens on larger scales via repeated-batch or continuous fermentation processes.

RESUMEN

Phenolic compounds such as catechol and resorcinol are toxic and persistent pollutants in the aqueous environment. Detection procedures such as chromatographic and spectrophotometric methods are time-consuming and require sophisticated instruments with skilled manpower. Development of a simple, cost effective, portable and disposable paper based biosensor could be a better alternative to the conventional methods. The present study attempted to develop a paper based biosensor by immobilizing horseradish peroxidase enzyme to detect catechol and resorcinol in aqueous samples. Horseradish peroxidase catalyzes the oxidation of phenolic compounds to semiquinones, which on reaction with a chromogen, 3-methyl 2-benzothiazolinone hydrazine (MBTH) gives faint pink to red color depending on the compound and its concentration in the sample is the basis for biosensing application. Different methods of enzyme immobilization on filter paper like physical adsorption, covalent coupling, and polysaccharide entrapment were executed. The performance of the various enzyme immobilization methods was evaluated by analyzing the developed color intensity using ImageJ software. Entrapment technique is the most effective method of immobilizing enzyme on the filter paper that produces the highest color intensity with better stability. The visible limit of detection (LoD) was observed as 0.45 mM (50 mg/L) for catechol and 0.09 mM (10 mg/L) for resorcinol in aqueous samples.

Asunto(s)

RESUMEN

Objective: To compare setup errors between patients using the customized Klarity AccuCushion® with a thermoplastic fixation mask and patients using a thermoplastic fixation mask or vacuum fixation cushion alone while receiving radiotherapy. Methods: A total of 66 patients with head and neck (H&N) tumors (n=27) or thoracic and abdominal tumors (T&N) tumors (n=39) were included during Jaurnary 2018 to December 2019. 15 H&N cancer patients using only a single head-neck-shoulder mask were categorized into group A; 12 patients using a customized Klarity AccuCushion® and head-neck-shoulder mask were categorized into group B. Among T&A cancer patients, 19 patients using only a vacuum fixation cushion were classified into group A; the remaining 20 patients using a customized Klarity AccuCushion® and thermoplastic fixation mask were classified into group B. Cone-beam computed tomography was performed, and the setup errors were evaluated. The setup errors in the left-right (LR) direction, superior-inferior (SI) direction, anterior-posterior (AP) direction, and for rotation were compared between groups A and B. Results: Among H&N cancer patients, the setup errors in group B in the LR direction, SI direction, and for rotation were 0.06±0.06 cm, 0.08±0.07 cm, and 0.12±0.17°, respectively, which were smaller than those in group A (0.10±0.11 cm, 0.13±0.14 cm, and 0.25±0.47°, respectively). The differences in setup errors in the LR direction, SI direction, and for rotation were significant between the two groups (P0.05). For T&A cancer patients, significant differences were found in setup errors between the two groups (P<0.05) in the LR direction (group B vs. group A: 0.10±0.08 cm vs. 0.14±0.12 cm) and for rotation (group B vs. group A: 0.09 ± 0.18° vs. 0.22 ± 0.39°). No significant differences were observed in the setup errors in the SI and AP directions. Conclusions: Compared with the immobilization techniques using only a thermoplastic mask and only a vacuumed fixation cushion, the technique using a customized Klarity AccuCushion® with a thermoplastic fixation mask can improve repeatability, stability, and setup errors in radiotherapy.

RESUMEN

Xylooligosaccharides display interesting prebiotic effects on human health. The endoxylanase Xys1Δ, from Streptomyces halstedii JM8, was immobilized and stabilized on glyoxyl-agarose beads by multipoint covalent attachment using a novel strategy based on surface coating with a multilayer of polymers. The optimal modification consisted of surface coating with a bilayer formed by a layer of derived dextran polymers and a layer of polyethylenimine. The optimized biocatalyst was 550-fold more stable than one-point covalent immobilized Xys1Δ (at 70 °C, pH 7). This biocatalyst was tested for the production of xylooligosaccharides from soluble xylans from various sources. Hydrolysis of beechwood, wheat straw and corncob xylans was 93% in 4 h, 44% in 5 h and 100% in 1 h, respectively. Maximum values of xylooligosaccharides were found for beechwood at 20.6 mg/mL, wheat at 12.5 mg/mL and corncob at 30.4 mg/mL. The optimized biocatalyst was reused for 15 reaction cycles without affecting its catalytic activity.

Asunto(s)

RESUMEN

In this study, the efficacy of electron beam irradiation versus chemical coupling for yielding polyethersulfone (PES) membranes with antibacterial properties was investigated. For the surface coating, a recently discovered lead compound, IL-KKA, comprising a short peptide sequence functionalized with imidazolium groups, was used. For better integration within the membrane, several novel variants of IL-KKA were generated. Membrane immobilization was achieved using different doses of electron beam irradiation and NHS/EDC chemical coupling. Physicochemical characterization of the coated membranes was performed by water contact angle measurements, X-ray photoelectron spectroscopy, and scanning electron microscopy. Our results show that electron beam irradiation is as effective and gentle as chemical coupling using the NHS/EDC method. Moreover, it was demonstrated that the obtained membranes exhibit promising antibacterial activity against B. subtilis. In summary, the technique presented herein might be promising as a template for developing future anti-biofilm devices.

RESUMEN

Biological compartmentalization is a fundamental principle of life that allows cells to metabolize, propagate, or communicate with their environment. Much research is devoted to understanding this basic principle and to harness biomimetic compartments and catalytic cascades as tools for technological processes. This Review summarizes the current state-of-the-art of these developments, with a special emphasis on length scales, mass transport phenomena, and molecular scaffolding approaches, ranging from small cross-linkers over proteins and nucleic acids to colloids and patterned surfaces. We conclude that the future exploration and exploitation of these complex systems will largely benefit from technical solutions for the integrated, machine-assisted development and maintenance of a next generation of biotechnological processes. These goals should be achievable by implementing microfluidics, robotics, and added manufacturing techniques supplemented by theoretical simulations as well as computer-aided process modeling based on big data obtained from multiscale experimental analyses.

Asunto(s)

RESUMEN

We herein describe the engineering of E. coli strains that display orthogonal tags for immobilization on their surface and overexpress a functional heterologous "protein content" in their cytosol at the same time. Using the outer membrane protein Lpp-ompA, cell-surface display of the streptavidin-binding peptide, the SpyTag/SpyCatcher system, or a HaloTag variant allowed us to generate bacterial strains that can selectively bind to solid substrates, as demonstrated with magnetic microbeads. The simultaneous cytosolic expression of functional content was demonstrated for fluorescent proteins or stereoselective ketoreductase enzymes. The latter strains gave high selectivities for specific immobilization onto complementary surfaces and also in the whole-cell stereospecific transformation of a prochiral CS -symmetric nitrodiketone.

Asunto(s)

RESUMEN

Antibody immobilization onto surfaces has widespread applications in many different fields. It is desirable to bind antibodies such that their fragment-antigen-binding (Fab) units are oriented away from the surface in order to maximize analyte binding. The immobilization of only Fab' fragments yields benefits over the more traditional whole antibody immobilization technique. Bound Fab' fragments display higher surface densities, yielding a higher binding capacity for the analyte. The nucleophilic sulfide of the Fab' fragments allows for specific orientations to be achieved. For biosensors, this indicates a higher sensitivity and lower detection limit for a target analyte. The last thirty years have shown tremendous progress in the immobilization of Fab' fragments onto gold, Si-based, polysaccharide-based, plastic-based, magnetic, and inorganic surfaces. This review will show the current scope of Fab' immobilization techniques available and illustrate methods employed to minimize non-specific adsorption of undesirables. Furthermore, a variety of examples will be given to show the versatility of immobilized Fab' fragments in different applications and future directions of the field will be addressed, especially regarding biosensors.

Asunto(s)