RESUMEN

Surface treatments play an important role in enhancing the osseointegration of Titanium (Ti) and its alloys. This study introduces a method employing biomimetic hydroxyapatite (Hap) deposition guided by molecularly organized phospholipids, affixed to the metal implant surface. Using the Langmuir-Blodgett technique, phospholipids were deposited onto Ti-screws by using CaCl2 or CaCl2/SrCl2 aqueous solution in the subphase of a Langmuir trough in the target proportion (i.e. 10 and 90 mol% of Sr2+ in relation of Ca2+) followed by immersion in phosphate buffer and in supersaturated simulated body fluid. Coating composition and morphology were evaluated using infrared spectroscopy and scanning electron microscopy, respectively, while contact angle measurements assessed coating wettability and surface energy. Randomized screws were then implanted into the tibias of healthy and osteoporotic female rats (G1: Control-Machined, G2: Hap, G3: HapSr10, G4: HapSr90). Osseointegration, assessed 60 days post-implantation, included reverse torque, fluorochrome area, bone tissue-screw contact area, and linear extent of bone-screw contact. Results, grouped by surface treatment (Machined, Hap, HapSr10, HapSr90), revealed that the deposition of Hap, HapSr10, and HapSr90 resulted in thin and rough coatings composed of hydroxyapatite (Hap) on the screw surface with nanoscale pores. The coatings resulted in increased wettability and surface energy of Ti surfaces. The minerals are chemically similar to natural bone apatite as revealed by FTIR analysis. In vivo analyses indicated higher torque values for strontium-containing surfaces in the osteoporotic group (p = 0.02) and, in the control group superior torque for screw removal on the Hap surface (p = 0.023). Hydroxyapatite-treated surfaces enhance morphology, composition, and reactivity, promoting screw osseointegration in healthy and osteoporotic female rats. The incorporation of strontium into the mineral phase has been proposed to not only stimulate osteoblast activity but also reduce osteoclastic resorption, which may explain the improved outcomes observed here in experimental osteoporotic conditions.

RESUMEN

The aim of this work is to investigate the changes in the physicochemical properties of hydroxyapatite (HAp) extracted from horse humerus bones of different ages (1, 3, 6, and 8 years) subjected to low temperature calcination (600°C). Thermal analysis revealed significant mass loss due to water, collagen, organic compounds, carbonates, and age-related magnesium out-diffusion. Higher fat content in older bones contributed to increased mass loss. Phosphorus content remained constant across age groups, while calcium and sodium showed age-related fluctuations. Magnesium levels decreased with age, emphasizing its importance for early bone development. The Ca/P ratio deviated from the stoichiometric values due to additional ions from biogenic sources. Infrared spectroscopy identified functional groups in carbonated HAp, with changes observed before and after calcination. The full width at half maximum (FWHM) of the 961 cm-1 band decreased with age, indicating improved crystalline quality. The molar absorption coefficients provided information on the changes in molecular concentration and emphasized the differences between the age groups. X-ray analysis revealed nanocrystalline HAp in all samples, with crystallite size increasing with age. Rietveld analysis showed that the lattice parameters were affected by the presence of organic material, but the lattice constants remained stable, confirming high crystallinity independent of age. TEM analysis confirmed nanocrystalline structures, with crystallite size increasing with age. SEM images showed the characteristic porosity of calcined HAp, with particle size correlating positively with age. Calcination at 600°C preserved the nanoscale properties and microcrystal formation. Raman spectroscopy confirmed the identity of HAp, with FWHM variations indicating age-related changes in crystalline quality. EHAp1 showed increased FWHM, indicating lower crystalline quality and increased trace element content.

Asunto(s)

Durapatita , Húmero , Animales , Caballos , Durapatita/química , Húmero/química , Frío , Envejecimiento

RESUMEN

The development of hydroxyapatite (HAp) and polyether ether ketone (PEEK) biocomposites has been extensively studied for bone repair applications due to the synergistic properties of the involved materials. In this study, we aimed to develop HAp/PEEK biocomposites using high-energy ball milling, with HAp concentrations (20%, 40%, and 60% w/v) in PEEK, to evaluate their physicochemical, mechanical, cytotoxicity, and antimicrobial properties for potential applications in Tissue Engineering (TE). The biocomposites were characterized by structure, morphology, apparent porosity, diametral compression strength, cytotoxicity, and antimicrobial activity. The study results demonstrated that the HAp/PEEK biocomposites were successfully synthesized. The C2 biocomposite, containing 40% HAp, stood out due to the optimal distribution of HAp particles in the PEEK matrix, resulting in higher compression strength (246 MPa) and a homogeneous microstructure. It exhibited antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, with no cytotoxicity observed. These properties make the C2 biocomposite promising for regenerative medicine applications, combining mechanical strength, bioactivity, and biocompatibility.

RESUMEN

Biomaterials and biopharmaceuticals for correcting large bone defects are a potential area of translational science. A new bioproduct, purified from snake venom and fibrinogen from buffalo blood, aroused interest in the repair of venous ulcers. Expanding potential uses, it has also been used to form biocomplexes in combination with bone grafts, associated with physical therapies or used alone. The aim of this preclinical study was to evaluate low-level laser photobiomodulation (PBM) in critical defects in the calvaria of rats filled with nanohydroxyapatite (NH) associated with the heterologous fibrin biopolymer (HFB). Sixty animals were used, divided into six groups (n = 10 each): G1 (NH); G2 (HFB); G3 (NH + HFB); G4 (NH + PBM); G5 (HFB + PBM); G6 (NH + HFB + PBM). PBM simultaneously used red (R) and infrared (IR) light emission, applied intraoperatively and twice a week, until the end of the experiment at 42 days. Microtomography, bone formation can be seen initially at the margins of the defect, more evident in G5. Microscopically, bone formation demonstrated immature and disorganized trabeculation at 14 days, with remnants of grafting materials. At 42 days, the percentage of new bone formed was higher in all groups, especially in G5 (HFB, 45.4 ± 3.82), with collagen fibers at a higher degree of maturation and yellowish-green color in the birefringence analysis with Picrosirius-red. Therefore, it is concluded that the HFB + PBM combination showed greater effectiveness in the repair process and presents potential for future clinical studies.

RESUMEN

This study evaluated the efficacy of synthetic bone blocks, composed of hydroxyapatite (HA) or ß-tricalcium phosphate (B-TCP), which were produced by additive manufacturing and used for the repair of critical size bone defects (CSDs) in rat calvaria. Sixty rats were divided into five groups (n = 12): blood clot (CONTROL), 3D-printed HA (HA), 3D-printed ß-TCP (B-TCP), 3D-printed HA + autologous micrograft (HA+RIG), and 3D-printed ß-TCP + autologous micrograft (B-TCP+RIG). CSDs were surgically created in the parietal bone and treated with the respective biomaterials. The animals were euthanized at 30 and 60 days postsurgery for microcomputed tomography (micro-CT) histomorphometric, and immunohistochemical analysis to assess new bone formation. Micro-CT analysis showed that both biomaterials were incorporated into the animals' calvaria. The HA+RIG group, especially at 60 days, exhibited a significant increase in bone formation compared with the control. The use of 3D-printed bioceramics resulted in thinner trabeculae but a higher number of trabeculae compared with the control. Histomorphometric analysis showed bone islands in close contact with the B-TCP and HA blocks at 30 days. The HA blocks (HA and HA+RIG groups) showed statistically higher new bone formation values with further improvement when autologous micrografts were included. Immunohistochemical analysis showed the expression of bone repair proteins. At 30 days, the HA+RIG group had moderate Osteopontin (OPN) staining, indicating that the repair process had started, whereas other groups showed no staining. At 60 days, the HA+RIG group showed slight staining, similar to that of the control. Osteocalcin (OCN) staining, indicating osteoblastic activity, showed moderate expression in the HA and HA+RIG groups at 30 days, with slight expression in the B-TCP and B-TCP+RIG groups. The combination of HA blocks with autologous micrografts significantly enhanced bone repair, suggesting that the presence of progenitor cells and growth factors in the micrografts contributed to the improved outcomes. It was concluded that 3D-printed bone substitute blocks, associated with autologous micrografts, are highly effective in promoting bone repair in CSDs in rat calvaria.

RESUMEN

Objective The present study aims to analyze histomorphometrically the repair of a non-critical bone defect after implantation of hydroxyapatite (HA) microspheres substituted by magnesium (Mg). Methods Thirty rats were distributed into 3 experimental groups, evaluated at 15 and 45 days postoperatively: HAG (bone defect filled with HA microspheres); HAMgG (bone defect filled with HA microspheres replaced with 1 mol% Mg), and CG (bone defect without implantation of biomaterials). Results After 15 days, the biomaterials filled the entire defect extent, forming a new osteoid matrix between the microspheres. In the CG, this neoformation was restricted to the edges with the deposition of loose connective tissue with reduced thickness. At 45 days, new bone formation filled almost the entire extension of the bone defect in the 3 groups, with statistically significant osteoid deposition in the CG despite the reduced thickness compared with the HAG and HAMgG. The groups with biomaterial implantation displayed a more abundant osteoid matrix than at 15 days. Conclusion The biomaterials studied showed biocompatibility, osteoconductivity, and bioactivity. The Mg concentration in the substituted HA did not stimulate more significant bone formation than HA without this ion.

RESUMEN

Despite the numerous studies on biocompatibility with nano-biomaterials, the biological effects of strontium-substituted HA nanoparticles (nSrHA) need to be better understood. So, we conducted an embryotoxicity test using zebrafish (Danio rerio) according to the OECD 236 guideline, a model that represents a viable alternative that bridges the gap between in vitro and mammalian models. Zebrafish embryos were exposed for 120 h to microspheres containing nSrHA nanoparticles with low and high crystallinity, synthesized at temperatures of 5°C (nSrHA5) and 90°C (nSrHA90). We evaluated lethality, developmental parameters, and reactive oxygen species (ROS) production. The larval behavior was assessed at 168 hpf to determine if the biomaterials affected motor responses and anxiety-like behavior. The results showed that the survival rate decreased significantly for the nSrHA5 group (low crystalline particles), and an increase in ROS was also observed in this group. However, none of the biomaterials caused morphological changes indicative of toxicity during larval development. Additionally, the behavioral tests did not reveal any alterations in all experimental groups, indicating the absence of neurotoxic effects from exposure to the tested biomaterials. These findings provide valuable insights into the biosafety of modified HA-based nanostructured biomaterials, making them a promising strategy for bone tissue repair. As the use of hydroxyapatite-based biomaterials continues to grow, it is crucial to ensure rigorous control over the quality, reliability, and traceability of these materials.

Asunto(s)

Estroncio , Pez Cebra , Animales , Estroncio/química , Estroncio/farmacología , Especies Reactivas de Oxígeno/metabolismo , Embrión no Mamífero/efectos de los fármacos , Ensayo de Materiales , Hidroxiapatitas/química , Hidroxiapatitas/farmacología , Nanoestructuras/química , Larva/efectos de los fármacos

RESUMEN

The increasing demand for effective bone regeneration materials drives the exploration of biomaterials with enhanced bioactivity and biocompatibility, such as zinc-substituted compounds. This study investigates the in vitro cellular interactions with nanostructured spheres composed of alginate/carbonated hydroxyapatite (CHA), compared to zinc-substituted CHA (ZnCHA). This work aimed to compare the physicochemical properties and biological effects of ZnCHA and CHA on osteoblasts. ZnCHA was synthesized using a wet chemical method, followed by characterization through X-ray diffraction, Fourier transform infrared spectroscopy, total organic carbon analysis, Wavelength-dispersive X-ray spectroscopy, and BET surface area analysis to assess ion release and structural changes. Biological evaluation was conducted using cell viability, proliferation, and biomineralization assays on osteoblasts. Results showed successful incorporation of zinc and carbonate, leading to reduced crystallinity and increased surface area. Cell viability and proliferation assays indicated ZnCHA's cytocompatibility and enhanced osteoblastic activity, with increased mineralization nodules compared to CHA samples. The study concludes that ZnCHA composites are promising candidates for bone tissue engineering, demonstrating improved cytocompatibility and potential for further preclinical evaluations.

RESUMEN

Bone defects and injuries are common, and better solutions are needed for improved regeneration and osseointegration. Bioresorbable membranes hold great potential in bone tissue engineering due to their high surface area and versatility. In this context, polymers such as poly(lactic-co-glycolic acid) (PLGA) can be combined with osteoconductive materials like hydroxyapatite (HA) nanoparticles (NPs) to create membranes with enhanced bioactivity and bone regeneration. Rotary Jet spinning (RJS) is a powerful technique to produce these composite membranes. This study presents an innovative and efficient method to obtain PLGA-HA(NPs) membranes with continuous fibers containing homogeneous HA(NPs) distribution. The membranes demonstrated stable thermal degradation, allowing HA(NPs) quantification. In addition, the PLGA-HA(NPs) presented osteoconductivity, were not cytotoxic, and had high cell adhesion when cultured with pre-osteoblastic cells. These findings demonstrate the potential of RJS to produce PLGA-HA(NPs) membranes for easy and effective application in bone regeneration.

RESUMEN

Calcium phosphate materials, particularly hydroxyapatite (HA), are extensively used in biomedical applications because of their prominence as primary inorganic constituents of human hard tissues. This study investigates the synthesis of HA coatings via spray pyrolysis using various precursors, including HA derived from bovine bone. The effects of pH on the formation and properties of HA coatings were systematically examined. Samples exposed to acidic conditions or left without pH adjustment led to the formation of HA, contrasting with the outcomes observed through dissolution methods. Different characterization techniques, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), were employed to evaluate the quality and crystallinity of the coatings. Among the samples, those exhibiting superior crystallinity and nanostructured features, including bovine HA, were selected for further surface functionalization with the antibiotic enrofloxacin using spin coating. As expected, the antibiotic loading on each material's surface depended on the amount of HA deposited on the substrate. However, the desorption results indicated that, in all cases, desorption persisted beyond 38 h, implying that HA-loaded matrices could be effective systems for controlled and prolonged drug release, which could be useful in dental or orthopedic implants for inhibiting the growth of bacterial biofilms.

Asunto(s)

Antibacterianos , Materiales Biocompatibles Revestidos , Durapatita , Durapatita/química , Materiales Biocompatibles Revestidos/química , Antibacterianos/química , Antibacterianos/farmacología , Bovinos , Animales , Concentración de Iones de Hidrógeno , Adsorción , Pirólisis

RESUMEN

OBJECTIVE: The current study aims to investigate the safety and efficacy of using calcium hydroxyapatite (CaHA) versus CaHA associated with hyaluronic acid (HA) for forehead volume replacement and contour restoration without forehead irregularities. METHODS: This interventional study involved 132 participants in a two-arm, parallel, double-blind trial for forehead treatment using the supraperiosteal technique. Group A received CaHA, and Group B received a combination of CaHA and HA as filler materials. Follow-up assessments occurred at 30 and 180 days, incorporating the 5-point Global Aesthetic Improvement Scale (GAIS) and photographic analysis for forehead volume replacement, contour restoration, and without forehead irregularities. Safety assessments included monitoring adverse events, particularly nodules. RESULTS: The study included all 132 enrolled patients who completed the trial. Applying CaHA in combination with HA resulted in a statistically significant improvement in both GAIS scale scores and the reduction of forehead irregularities. The total incidence of nodules was 3.7%. Group A had four times more occurrences of nodules than Group B. Furthermore, Group B exhibited lower rates of forehead irregularities following the treatment compared to Group A. CONCLUSION: The supraperiosteal application of CaHA and HA for forehead treatment demonstrates superior efficacy in addressing signs of aging compared to the isolated use of CaHA.

RESUMEN

Glass ionomer cements (GICs) are the common materials employed in pediatric dentistry because of their specific applications in class I restorations and atraumatic restoration treatments (ART) of deciduous teeth in populations at high risk of caries. Studies show a limited clinical durability of these materials. Attempts have thus been made to incorporate nanoparticles (NPs) into the glass ionomer for improving resistance and make it like the tooth structure. An in vitro experimental study was conducted using the required samples dimensions and prepared based on the test being carried out on the three groups with or without the modification of light-cured glass ionomer. Samples were grouped as follows: control group (G1_C), 2% silver phosphate/hydroxyapatite NPs group (G2_SPH), and 2% titanium dioxide NPs group (G3_TiO2). The physical tests regarding flexural strength (n = 10 per group), solubility (n = 10 per group), and radiopacity (n = 3 per group) were performed. The data were analyzed by Shapiro Wilks test, and one-way analysis of variance (one-way ANOVA), and multiple comparisons by post hoc Tukey's test. The p-value of < 0.05 was considered significant. No statistically significant difference was observed between the control group (G1_C) and (G2_SPH) (p = 0.704) in the flexural strength test, however differences were found between G2_SPH and G3_TiO2 groups, ANOVA (p = 0.006); post hoc Tukey's test (p = 0.014). Pertaining to the solubility, G2_SPH obtained the lowest among the three groups, ANOVA (p = 0.010); post hoc Tukey's test (p = 0.009). The three study groups obtained an adequate radiopacity of >1 mm Al, respectively. The resin-modified glass ionomer cement (RMGIC) was further modified with 2% silver phosphate/hydroxyapatite NPs to improve the physical properties such as enhancing the solubility and sorption without compromising the flexural strength and radiopacity behavior of modified RMGIC. The incorporation of 2% titanium dioxide NPs did not improve the properties studied.

Asunto(s)

Durapatita , Cementos de Ionómero Vítreo , Nanopartículas , Fosfatos , Titanio , Titanio/química , Cementos de Ionómero Vítreo/química , Durapatita/química , Nanopartículas/química , Fosfatos/química , Técnicas In Vitro , Ensayo de Materiales , Humanos , Compuestos de Plata/química , Solubilidad , Resistencia Flexional

RESUMEN

In situ 3D printing is attractive for the direct repair of bone defects in underdeveloped countries and in emergency situations. So far, the lack of an interesting method to produce filament using FDA-approved biopolymers and nanoceramics combined with a portable strategy limits the use of in situ 3D printing. Herein, we investigated the osseointegration of new nanocomposite filaments based on polylactic acid (PLA), laponite (Lap), and hydroxyapatite (Hap) printed directly at the site of the bone defect in rats using a portable 3D printer. The filaments were produced using a single-screw extruder (L/D = 26), without the addition of solvents that can promote the toxicity of the materials. In vitro performance was evaluated in the cell differentiation process with mesenchymal stem cells (MSC) by an alkaline phosphatase activity test and visualization of mineralization nodules; a cell viability test and total protein dosage were performed to evaluate cytotoxicity. For the in vivo analysis, the PLA/Lap composite filaments with a diameter of 1.75 mm were printed directly into bone defects of Wistar rats using a commercially available portable 3D printer. Based on the in vitro and in vivo results, the in situ 3D printing technique followed by rapid cooling proved to be promising for bone tissue engineering. The absence of fibrous encapsulation and inflammatory processes became a good indicator of effectiveness in terms of biocompatibility parameters and bone tissue formation, and the use of the portable 3D printer showed a significant advantage in the application of this material by in situ printing.

RESUMEN

Zinc is known for its role in enhancing bone metabolism, cell proliferation, and tissue regeneration. Several studies proposed the incorporation of zinc into hydroxyapatite (HA) to produce biomaterials (ZnHA) that stimulate and accelerate bone healing. This systematic review aimed to understand the physicochemical characteristics of zinc-doped HA-based biomaterials and the evidence of their biological effects on osteoblastic cells. A comprehensive literature search was conducted from 2022 to 2024, covering all years of publications, in three databases (Web of Science, PUBMED, Scopus), retrieving 609 entries, with 36 articles included in the analysis according to the selection criteria. The selected studies provided data on the material's physicochemical properties, the methods of zinc incorporation, and the biological effects of ZnHA on bone cells. The production of ZnHA typically involves the wet chemical synthesis of HA and ZnHA precursors, followed by deposition on substrates using processes such as liquid precursor plasma spraying (LPPS). Characterization techniques confirmed the successful incorporation of zinc into the HA lattice. The findings indicated that zinc incorporation into HA at low concentrations is non-cytotoxic and beneficial for bone cells. ZnHA was found to stimulate cell proliferation, adhesion, and the production of osteogenic factors, thereby promoting in vitro mineralization. However, the optimal zinc concentration for the desired effects varied across studies, making it challenging to establish a standardized concentration. ZnHA materials are biocompatible and enhance osteoblast proliferation and differentiation. However, the mechanisms of zinc release and the ideal concentrations for optimal tissue regeneration require further investigation. Standardizing these parameters is essential for the effective clinical application of ZnHA.

RESUMEN

This study investigated the impact of adding hydroxyapatite nanoparticles to implant surfaces treated with zirconia blasting and acid etching (ZiHa), focusing on structural changes and bone healing parameters in low-density bone sites. The topographical characterization of titanium discs with a ZiHa surface and a commercially modified zirconia-blasted and acid-etched surface (Zi) was performed using scanning electron microscopy, profilometry, and surface-free energy. For the in vivo assessment, 22 female rats were ovariectomized and kept for 90 days, after which one implant from each group was randomly placed in each tibial metaphysis of the animals. Histological and immunohistochemical analyses were performed at 14 and 28 days postoperatively (decalcified lab processing), reverse torque testing was performed at 28 days, and histometry from calcified lab processing was performed at 60 days The group ZiHa promoted changes in surface morphology, forming evenly distributed pores. For bone healing, ZiHa showed a greater reverse torque, newly formed bone area, and bone/implant contact values compared to group Zi (p < 0.05; t-test). Qualitative histological and immunohistochemical analyses showed higher features of bone maturation for ZiHa on days 14 and 28. This preclinical study demonstrated that adding hydroxyapatite to zirconia-blasted and acid-etched surfaces enhanced peri-implant bone healing in ovariectomized rats. These findings support the potential for improving osseointegration of dental implants, especially in patients with compromised bone metabolism.

Asunto(s)

Durapatita , Nanopartículas , Oseointegración , Propiedades de Superficie , Circonio , Circonio/química , Animales , Durapatita/química , Durapatita/farmacología , Femenino , Ratas , Nanopartículas/química , Oseointegración/efectos de los fármacos , Implantes Dentales , Titanio/química , Tibia/efectos de los fármacos , Tibia/cirugía , Grabado Ácido Dental

RESUMEN

The primary objective of this investigation was to synthesize a resin incorporating nanoparticles of hydroxyapatite and silver (HA-NpsAg) to enhance biocompatibility and antimicrobial efficacy, thereby facilitating potential implementation within the dental industry. These enhancements aim to ensure reliable, durable, functional, and aesthetically pleasing restorations while concurrently reducing susceptibility to bacterial colonization within the oral cavity. Hydroxyapatite powders were prepared using the sol-gel method and doped with silver nanoparticles obtained by chemical reduction. The crystalline amorphous calcium phosphate powder had a particle size of 279 nm, and the silver nanoparticles had an average diameter of 26.5 nm. Resin spheres containing HA-NpsAg (RHN) were then synthesized at two concentrations (0.5% and 1%) by dissolving the initial monomer mixture in tetrahydrofuran. Subsequent antimicrobial evaluations were conducted via agar diffusion and turbidimetry, employing three strains of Gram-negative bacteria (E. coli, K. oxytoca, and P. aeruginosa) and three strains of Gram-positive bacteria (S. mutans, S. aureus, and B. subtilis). The findings revealed that P. aeruginosa exhibited maximum susceptibility to RHN powder at a concentration of 0.5%, while RHN powder at 1% concentration demonstrated maximal inhibition against S. aureus and S. mutans. Overall, our study highlights the successful synthesis of a dental resin with hydroxyapatite and silver nanoparticles, exhibiting bactericidal properties at low silver concentrations. These findings hold promise for enhancing dental materials with improved antimicrobial efficacy and clinical performance.

RESUMEN

The catalytic performance of modified hydroxyapatite nanoparticles, Ca10-xFex-yWy(PO4)6(OH)2, was applied for the degradation of methylene blue (MB), fast green FCF (FG) and norfloxacin (NOR). XPS analysis pointed to the successful partial replacement of Ca by Fe. Under photo-electro-Fenton process, the catalyst Ca4FeII1·92W0·08FeIII4(PO4)6(OH)2 was combined with UVC radiation and electrogenerated H2O2 in a Printex L6 carbon-based gas diffusion electrode. The application of only 10 mA cm-2 resulted in 100% discoloration of MB and FG dyes in 50 min of treatment at pH 2.5, 7.0 and 9.0. The proposed treatment mechanism yielded maximum TOC removal of ∼80% and high mineralization current efficiency of ∼64%. Complete degradation of NOR was obtained in 40 min, and high mineralization of ∼86% was recorded after 240 min of treatment. Responses obtained from LC-ESI-MS/MS are in line with the theoretical Fukui indices and the ECOSAR data. The study enabled us to predict the main degradation route and the acute and chronic toxicity of the by-products formed during the contaminants degradation.

Asunto(s)

Electrodos , Peróxido de Hidrógeno , Hierro , Azul de Metileno , Nanopartículas , Contaminantes Químicos del Agua , Catálisis , Peróxido de Hidrógeno/química , Hierro/química , Azul de Metileno/química , Nanopartículas/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Norfloxacino/química , Durapatita/química , Colorantes/química , Procesos Fotoquímicos , Rayos Ultravioleta

RESUMEN

OBJECTIVES: This study aimed to assess antimicrobial efficacy, cytotoxicity, and cytokine release (IL-1b, IL-6, IL-10, TNF-α) from human dental pulp stem cells (hDPSCs) of chitosan (CH) and hydroxyapatite (HAp)-modified glass ionomer cements (GIC). METHODS: GICs with varied CH and HAp concentrations (0 %, 0.16 %, 2 %, 5 %, 10 %) were tested against S. mutans for 24 h or 7 days. Antimicrobial activity was measured using an MTT test. Cytotoxicity evaluation followed for optimal concentrations, analyzing mitochondrial activity and apoptosis in hDPSCs. Cytokine release was assessed with MAGPIX. Antimicrobial analysis used Shapiro-Wilk, Kruskal-Wallis, and Dunnett tests. Two-way ANOVA, Tukey, and Dunnett tests were applied for hDP metabolism and cytokine release. RESULTS: CH 2 % and HAp 5 % significantly enhanced GIC antimicrobial activity, especially after seven days. In immediate analysis, all materials showed reduced mitochondrial activity compared to the control. After 24 h, CH demonstrated mitochondrial metabolism similar to the control. All groups exhibited mild cytotoxicity (∼30 % cell death). Only IL-6 was influenced, with reduced release in experimental groups. SIGNIFICANCE: CH 2 % and HAp 5 % were most effective for antibacterial effects. GIC-CH 2 % emerged as the most promising formula, displaying significant antibacterial effects with reduced hDPSC toxicity.

Asunto(s)

Quitosano , Citocinas , Pulpa Dental , Durapatita , Cementos de Ionómero Vítreo , Quitosano/química , Quitosano/farmacología , Cementos de Ionómero Vítreo/toxicidad , Cementos de Ionómero Vítreo/farmacología , Cementos de Ionómero Vítreo/química , Humanos , Durapatita/química , Durapatita/farmacología , Pulpa Dental/citología , Pulpa Dental/efectos de los fármacos , Citocinas/metabolismo , Streptococcus mutans/efectos de los fármacos , Antiinfecciosos/farmacología , Antiinfecciosos/química , Ensayo de Materiales , Células Cultivadas , Células Madre/efectos de los fármacos , Apoptosis/efectos de los fármacos

RESUMEN

BACKGROUND: Treating signs of aging requires skeletal restructuring, facial contour redefinition, and sagging skin treatment. Hence, HarmonyCa® was recently introduced in the market, combining hyaluronic acid and hydroxyapatite. However, there are no studies evaluating the physicochemical properties of this material. PURPOSE: To analyze the morphology, rheology, and clinical applicability of HarmonyCa® over a 180-day follow-up. METHODS: A morphological analysis with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) and rheology measurement with a rheometer. The clinical applicability analysis included a tissue ptosis patient who received the product and was reassessed 30 and 180 days after applying HarmonyCa®. RESULTS: SEM and EDS analyses showed two distinct morphologies related to hydroxyapatite and hyaluronic acid. The rheological measurements of HarmonyCa® showed G' and G″ of 51.56 and 44.01 Pa, respectively. The tan δ value was 0.8503, and G* was 108.1 Pa. The clinical outcomes were satisfactory. CONCLUSION: HarmonyCa® presents a good synergy between hyaluronic acid and hydroxyapatite. Also, the rheological analysis showed moderate viscosity for the product, with a clinical indication for subcutaneous application. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Asunto(s)

Durapatita , Ácido Hialurónico , Reología , Humanos , Ácido Hialurónico/administración & dosificación , Ácido Hialurónico/química , Ácido Hialurónico/farmacología , Durapatita/administración & dosificación , Durapatita/química , Durapatita/farmacología , Femenino , Envejecimiento de la Piel/efectos de los fármacos , Técnicas Cosméticas , Rellenos Dérmicos/administración & dosificación , Rellenos Dérmicos/química , Persona de Mediana Edad , Microscopía Electrónica de Rastreo , Adulto , Estudios de Seguimiento , Inyecciones Subcutáneas

RESUMEN

The objective of this study was to synthesize and characterize porous Cellulose Acetate (CA) scaffolds using the electrospinning technique and functionalize the surface of the scaffolds obtained through the dip-coating method with a Hydroxyapatite (HA) nanocomposite and varying concentrations of graphene oxide (GO) for application in tissue engineering regeneration techniques. The scaffolds were divided into four distinct groups based on their composition: 1) CA scaffolds; 2) CAHAC scaffolds; 3) CAHAGOC 1.0% scaffolds; 4) CAHAGOC 1.5% scaffolds. Scaffold analyses were conducted using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS), and in vitro cell viability assays (WST). For the biological test analysis, Variance (two-way) was used, followed by Tukey's post-test (α = 0.05). The XRD results revealed the predominant presence of CaP phases in the CAHAC, CAHAGOC 1.0%, and CAHAGOC 1.5% groups, emphasizing the presence of HA in the scaffolds. FTIR demonstrated characteristics of cellulose and PO4 bands in the groups containing HA, confirming the presence of CaP in the synthesized materials, as also indicated by XRD. Raman spectroscopy showed the presence of D and G bands, consistent with GO, confirming the successful incorporation of the HAGO nanocomposite into the scaffolds. The micrographs displayed overlapping electrospun fibers, forming the three-dimensional structure in the produced scaffolds. It was possible to observe hydroxyapatite crystals filling some of these pores, creating a suitable structure for cell adhesion, proliferation, and nutrition, as corroborated by the results of in vitro tests. All scaffolds exhibited high cell viability, with significant cell proliferation. Even after 48 h, there was a slight reduction in the number of cells, but a noteworthy increase in cell proliferation was evident in the CAHAGOC 1.5% group after 48 h (p < 0.05). In conclusion, it can be affirmed that the produced scaffolds demonstrated physical and biological characteristics and properties capable of promoting cell adhesion and proliferation. Therefore, they represent significant potential for application in tissue engineering, offering a new perspective regarding techniques and biomaterials applied in regenerative therapies.

Asunto(s)

Celulosa , Durapatita , Grafito , Nanocompuestos , Ingeniería de Tejidos , Andamios del Tejido , Grafito/química , Durapatita/química , Celulosa/química , Celulosa/análogos & derivados , Nanocompuestos/química , Andamios del Tejido/química , Supervivencia Celular/efectos de los fármacos , Animales