RESUMEN

In search for novel materials to replace noble metal-based electrocatalysts in electrochemical energy conversion and storage devices, special attention is given to a distinct class of materials, MAX phase that combines advantages of ceramic and metallic properties. Herein, Nb4AlC3 MAX phase is prepared by a solid-state mixing reaction and characterized morphologically and structurally by transmission and scanning electron microscopy with energy-dispersive X-ray spectroscopy, nitrogen-sorption, X-ray diffraction analysis, X-ray photoelectron and Raman spectroscopy. Electrochemical performance of Nb4AlC3 in terms of capacitance as well as for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is evaluated in different electrolytes. The specific capacitance Cs of 66.4, 55.0, and 46.0 F g-1 at 5 mV s-1 is determined for acidic, neutral and alkaline medium, respectively. Continuous cycling reveals high capacitance retention in three electrolyte media; moreover, increase of capacitance is observed in acidic and neutral media. The electrochemical impedance spectroscopy showed a low charge transfer resistance of 64.76 Ω cm2 that resulted in better performance for HER in acidic medium (Tafel slope of 60 mV dec-1). In alkaline media, the charge storage value in the double layer is 360 mF cm-2 (0.7 V versus reversible hydrogen electrode) and the best ORR performance of the Nb4AlC3 is achieved in this medium (Tafel slope of 126 mV dec-1).

RESUMEN

In this study, a systematic investigation of MoS2 nanostructure growth on a SiO2 substrate was conducted using a two-stage process. Initially, a thin layer of Mo was grown through sputtering, followed by a sulfurization process employing the CVD technique. This two-stage process enables the control of diverse nanostructure formations of both MoS2 and MoO3 on SiO2 substrates, as well as the formation of bulk-like grain structures. Subsequently, the addition of reduced graphene oxide (rGO) was examined, resulting in MoS2/rGO(n), where graphene is uniformly deposited on the surface, exposing a higher number of active sites at the edges and consequently enhancing electroactivity in the HER. The influence of the synthesis time on the treated MoS2 and also MoS2/rGO(n) samples is evident in their excellent electrocatalytic performance with a low overpotential.

RESUMEN

In this work, the effect of copper addition on NiMo coating is evaluated in regard to the hydrogen evolution reaction (HER). NiMo and NiMo-NiCu composites are prepared by a simple coelectrodeposition process. The effect of Cu on deposit characters were tested by varying it in the range of 0.06-0.20 molar ratio. Copper addition promotes the growth of a new crystalline phase: NiCu. Also, the copper addition changed the composite surface. NiMo-NiCu0.12 shows a surface roughness 30 times higher than the NiMo material. NiMo-NiCu materials present higher activity toward HER, larger electroactive area, and higher stability in continuous water electrolysis than NiMo catalysts, as demonstrated by Tafel curves, electrochemical impedance spectroscopy measurements, and polarization tests. The combination of the large electroactive area due to the copper addition, the synergism between Ni-Mo, and the presence of Ni and Mo oxides on the surface results in catalyst with excellent features for HER application.

RESUMEN

In this research, we report a simple hydrothermal synthesis to prepare rhenium (Re)- doped MoS2 flower-like microspheres and the tuning of their structural, electronic, and electrocatalytic properties by modulating the insertion of Re. The obtained compounds were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Structural, morphological, and chemical analyses confirmed the synthesis of poorly crystalline Re-doped MoS2 flower-like microspheres composed of few stacked layers. They exhibit enhanced hydrogen evolution reaction (HER) performance with low overpotential of 210 mV at current density of 10 mA/cm2, with a small Tafel slope of 78 mV/dec. The enhanced catalytic HER performance can be ascribed to activation of MoS2 basal planes and by reduction in charge transfer resistance during HER upon doping.

Asunto(s)

RESUMEN

The ability to tune the electronic properties of nanomaterials has played a major role in the development of sustainable energy technologies. Metallic nanocatalysts are at the forefront of these advances. Their unique properties become even more interesting when we can control the distribution of the electronic states in the nanostructure. Here, we provide a comprehensive evaluation of the electronic surface states in ultrasmall metallic nanostructures by combining experimental and theoretical methods. The developed strategy allows the controlled synthesis of bimetallic nanostructures in the core-shell configuration, dispensing of the use of any surfactant or stabilizing agents, which usually inactivate important surface phenomena. The synthesized ultrasmall Au@Pt nanoarchitecture (∼1.8 nm) presents an enhanced performance catalyzing the hydrogen evolution reaction. First-principles calculations of projected and space-resolved local density of states of Au55@Pt92 (core-shell), Au55Pt92 (alloy), and Pt147 nanoparticles show a prominent increase in the surface electronic states for the core-shell bimetallic nanomaterial. It arises from a more-effective charge transfer from gold to the surface platinum atoms in the core-shell configuration. In pure Pt147 or Au55Pt92 alloy nanoparticles, a great part of the electronic states near the Fermi level is buried in the core atoms, disabling these states for catalytic applications. The proposed experimental-theoretical approach may be useful for the design of other systems composed of metallic nanoparticles supported on distinct substrates, such as two-dimensional materials and porous matrices. These nanomaterials find several applications not only in heterogeneous catalysis but also in sensing and optoelectronic devices.

RESUMEN

Cellulose nanowhiskers (CNW) from cotton, was prepared by acid hydrolysis and purified using a size selection process to obtain homogeneous samples with average particle size of 270 nm and 85.5% crystallinity. Purified CNW was used as precursor to carbon nanoneedles (CNN) synthesis. The synthesis of CNN loaded with different metals dopants were carried out by a nanoreactor method and the obtained CNNs applied as electrocatalysts for hydrogen evolution reaction (HER). In the carbon nanoneedles synthesis, Ni, Cu, or Fe worked as graphitization catalyst and the metal were found present as dopants in the final material. The used metal appeared to have direct influence on the degree of organization of the particles and also in the surface density of polar groups. It was evaluated the influence of the graphitic organization on the general properties and nickel was found as the more appropriate metal since it leads to a more organized material and also to a high activity toward HER.

Asunto(s)

RESUMEN

We have undertaken first-principles electronic structure calculations to show that the chemical functionalization of two-dimensional hydrogenated silicene (silicane) and germanene (germanane) can become a powerful tool to increase the photocatalytic water-splitting activity. Spin-polarized density functional theory within the GGA-PBE and HSE06 types of exchange correlation functionals has been used to obtain the structural, electronic, and optical properties of silicane and germanane functionalized with a series of nonmetals (N, P, and S), alkali metals (Li, Na, and K) and alkaline-earth metals (Mg and Ca). The surface-adsorbate interaction between the functionalized systems with H2 and O2 molecules that leads to envisaged hydrogen and oxygen evolution reaction activity has been determined.