RESUMEN

INTRODUCTION: Fluoroscopic guided procedures are a mainstay for Interventional Radiology (IR) procedures. Practice is needed for the novice to interpret fluoroscopic images and simultaneously perform the procedure hands-on as well as control the foot pedal to screen. We describe the development of a training simulation model which simulates the human kidney, ureter and bladder. METHOD: Stereolithography (SLA) 3D Print technology using SLA resin and Anycubic SLA printer were employed. A plastic tubing was used to connect the 3D printed kidney and bladder as the ureter. This simulation model permits fluoroscopic guided filling of "pelvicalyceal system" with contrast as well as ureteric stenting, guidewire and drainage catheter manipulation. Effectiveness of the model to attain skills for nephrostomy exchange and ureteric stenting was obtained via questionnaire from trainees prior to and after utilising the model. RESULT: The 3D printing simulation model of the kidney, ureter and bladder system enable trainees to perform nephrostomy exchange, nephrostogram and antegrade stenting. Participants felt more confident to perform the procedures as they were more familiar with the procedure. Besides that, participants felt their wire and catheter manipulation skills have improved after using the simulation model. CONCLUSION: Neph-ex simulation model is safe and effective for hands-on training in improving proficiency of fluoroscopy-guided nephrostomy exchange and antegrade ureteric stenting.

RESUMEN

PURPOSE: The lack of training is a significant barrier to practicing brachytherapy (BT). Tata Memorial Centre, alongside international BT experts and BrachyAcademy, developed a hybrid gynecological BT training module. This study outlines the preparation, organization, and execution of the 2022-2023 Mumbai training, evaluates its effectiveness, and highlights areas for improvement. MATERIALS AND METHODS: Participants were radiation oncologists (RO) and medical physicists (MP) with experience in gynecological BT aiming to transition to image-guided brachytherapy (IGBT). The training covered cervical, endometrial, vaginal, vulvar, periurethral cancers, and pelvic reirradiation. The hybrid course included online pre and postcourse homework assignments, a live workshop with hands-on training, a 6-month online follow-up, and a 12-month opportunity to share the transition experience. RESULTS: The December 2022 Mumbai live workshop spanned 2.5 days, attracting 39 participants from 8 countries (Asia, Africa, Australia/Oceania). Feedback rated the course 9/10, with 78% fully meeting expectations. Forty-four percent suggested extending hands-on training. At the 6-month follow-up, response rates were low (33% RO, 11% MP). Among responding RO, 70% reported practice changes after attending the course, 40% implemented IGBT concepts in clinical practice, and 50% increased confidence in image-guided procedures. Overall, 45% of respondent sites could strengthen their intracavitary/interstitial program, while others faced limitations due to lack of access to advanced BT applicators. CONCLUSION: The hybrid gynecological BT training concept was successfully executed. Areas for improvement include extending hands-on training and enhancing participant engagement postcourse. Structured steps beyond training may be needed to improve the utilization of advanced brachytherapy for gynecological cancers.

RESUMEN

The Renal Expert in Vascular Access (REVAC) is one of the four modules of the Nephrology Partnership for Advancing Technology in Healthcare (N-PATH) project, the first European-wide advanced training course in diagnostics and interventional nephrology, funded by Erasmus+ Knowledge Alliance, a European Commission program. The N-PATH primary goal was to train 40 young European nephrologists in both theoretical knowledge and practical skills related to interventional nephrology. The REVAC module focused on the crucial aspects of vascular access (VA) care in nephrology practice, as a complementary training path to the actual residency program. The aim was to provide nephrology fellows with comprehensive knowledge and skills related to VA management. The methodology was based on face-to-face meetings and online learning, modern facilities, experienced tutors, cutting edge simulators, augmented reality tools by means of a multidisciplinary international faculty and hands-on-courses. A feedback survey reported the experience of fellows who attended the REVAC module, confirming the positive impact on their ongoing nephrology training. We are confident that this project will revitalize their nephrology careers and will help training the next generation of nephrologists; they will be able to manage VA needs with the help of multi-disciplinary teams to safely optimize the care of hemodialysis patients.

RESUMEN

PURPOSE: We developed a 3D-printed phantom model for ultrasound-guided caudal block for educational or training purposes because there have been no reports of the 3D-printed phantom model for ultrasound-guided caudal block. This study aimed to identify the needs for the phantom model in a lecture and demonstration at hands-on training (HoT) to promote the use of caudal block for sufficient pain control during high-dose-rate intracavitary/interstitial brachytherapy for gynecological cancers. MATERIALS AND METHODS: The sacrum and formwork were designed by computed tomography imaging. A 3D-modeling software program was used to create the sacrum and formwork. The phantom was solidified by injecting a gelatin-based gel. Ultrasonography was performed to visualize the sacral hiatus and puncture needle in the phantom. In October 2023, 10 radiation oncologists who did not perform caudal block in daily clinical practice from ten Japanese facilities participated in HoT on ultrasound-guided caudal block. After the HoT, questionnaires were distributed to each participant, and feedback was obtained through online channels. RESULTS: After receiving a lecture and demonstration on ultrasound-guided caudal block, 90% of the respondents would like to practice the procedure in their daily clinical practice. Moreover, 100% of the respondents would like to use the 3D-printed phantom model for ultrasound-guided caudal block for educational or training purposes. CONCLUSION: The 3D-printed phantom model for ultrasound-guided caudal block can be used in training and is in demand for facilities introducing caudal block.

Asunto(s)

RESUMEN

OBJECTIVE: This study was conducted to assess the need for clinical forensic medicine (CFM) training (hands-on and bedside) in medical undergraduate students and to determine the utility of skill-based teaching methodology in CFM. METHOD: A cross-sectional study was carried out in the Government Medical College, where we used the mixed model approach (qualitative and quantitative component) to access the approach of three groups containing 50 participants each from (1) resident doctors/interns, (2) faculty, (3) casualty medical officers, toward skill-based teaching of CFM. A structured pretested questionnaire was administered to all study participants. The questionnaire was based on their perception regarding the legal problems faced during clinical practice and their attitude toward the need for CFM. It was followed by a focus group discussion (FGD) arranged separately for each group of 10 participants. Each FGD session lasts for 40 minutes with a moderator and recorder. RESULT: Present MBBS (Bachelor of Medicine & Bachelor of Surgery) curriculum teaches CFM very early is strongly agreed by 20 (40%) of the faculty, four (8%) of interns, and three (6%) of medical officers. 40 (80%) of interns, 43 (86%) of medical officers, and 40 (80%) of faculty necessitate hands-on training in CFM in the MBBS curriculum. Forensic medicine specialists should handle clinical medico-legal cases (MLCs), as agreed by 50 (100%) faculty, 46 (98%) interns, and 47 (94%) medical officers. CONCLUSION: Hands-on training in CFM is needed for a better practical approach for doctors toward handling MLCs. Hands-on training should be introduced in the second-year MBBS curriculum, and their clinical aspects should be taught simultaneously with clinical subjects till the internship.

RESUMEN

Aim: Existing gaps in nursing curriculum particularly related to medication management such as administration and monitoring increase the propensity of nurses to commit medication errors during clinical practice. The present training program was conducted with an aim to sensitize and educate undergraduate nursing students on medication errors' related aspects. Methods: The participants were students pursuing bachelors nursing degree course (second and third year). The training "Medication errors: Role of Nurse practitioners" comprised of blended teaching methods such as theme lectures, hands on training exercises, small group case­based learning, role plays, and nursing officer's practical experiences. The participants' knowledge and perception about medication errors were assessed at baseline (pre-intervention phase) and 1 week after program (post-intervention phase) with the help of a structured self-administered questionnaire in English language. Results: A total of 110 nursing students participated in the program. Post program there was a consistent increase in the number of correct responses to all knowledge-based questions with a significant improvement in knowledge scores from baseline [Baseline: (mean ± SD) 12.62 ± 2.33; Post-training: 18.52 ± 2.22; P < .001]. There was a positive change in the perception about medication errors among students. The participants rated the overall quality of program as excellent [66 (60%)] or very good [40 (36.4%)]. More than 90% agreed on its applicability in their future practice. Conclusions: The training was quite successful in educating nursing students on medication errors. There is a constant need to educate nurses and other healthcare providers including doctors and pharmacists on medication safety related aspects with an ultimate goal to improve patient safety.

RESUMEN

INTRODUCTION: One in four school-age children has a chronic health condition, with approximately 6% of them having multiple chronic health conditions. These students are at an elevated risk of individual health emergencies during school hours. While teachers receive online training to assist in these emergencies, they lack practicing with rescue medications. METHODS: We developed a Quality Improvement (QI) program that had a) a live presentation; b) a hands-on workshop to practice using rescue medications for allergies, asthma, seizures, and diabetes; c) fliers with first-aid guidelines; and d) a web-based reference toolkit. Teachers' confidence and knowledge were measured using the Learning Self-Efficacy Scale and a knowledge questionnaire with a pre- and post-intervention survey. We also assessed their clinical skills using the rescue medications. RESULTS: 129 teachers took part in this QI program. We collected 95 pre- and 81 post-surveys, with 47 matched. We saw statistically significant increases in confidence, as well as in the individual cognitive, affective, and psychomotor domains. Teachers also increased their overall knowledge. Collaterally, other district-wide improvements developed. CONCLUSION: This evidence-based, hands-on QI program provided teachers the opportunity to put into practice clinical skills, increasing their confidence to help students when experiencing an individual health emergency. Furthermore, changes beyond the primary goal of this QI program were implemented, highlighting the lead role of the registered nurse as the public health advocate. IMPLICATION TO PRACTICE: Laypeople benefit from hands-on training to learn clinical skills. This program serves as a basis for improving health emergencies preparedness in schools.

Asunto(s)

RESUMEN

This study assessed the significance of hands-on-training (HoT) and questionnaire-based surveys on 3D image-guided brachytherapy (3D-IGBT) and a combination of intracavitary and interstitial brachytherapy, the so-called 'hybrid' BT (HBT), in uterine cervical cancer. In October 2023, 29 radiation oncologists, nurses, radiologic technologists and medical physicists from 10 Japanese facilities participated in an HoT on 3D-IGBT and HBT. Questionnaires were distributed to each participant before and after the HoT, and feedback was obtained through online channels. The questionnaire response rate was 83% (24/29), with at least one participant responding from each facility. 'Insertion of applicators and needles', 'human resource shortage' and 'pain relief and sedation' were the primary concerns of radiation oncologists. 'Applicator reconstruction', ' optimization of dwell positions', ' treatment planning' and ' human resource shortages ' were the primary concerns of radiological technologists and medical physicists. The HoT content was adjusted according to the results of preliminary surveys. The concerns expressed by the participants were addressed during the lectures and practical training. Significant reductions in anxiety were observed toward all items of the 10-point self-assessment after the HoT, regardless of the profession. The average score on satisfaction with the HoT (on a 10-point scale) was 9.52 (minimum of 8 and maximum of 10). In conclusion, HoT tailored in response to a pre-questionnaire-based survey effectively reduced participants' anxiety regarding the implementation of 3D-IGBT and HBT.

Asunto(s)

RESUMEN

The N-PATH (Nephrology Partnership for Advancing Technology in Healthcare) program concluded with the 60th European Renal Association 2023 Congress in Milan, Italy. This collaborative initiative aimed to provide advanced training in interventional nephrology to young European nephrologists. Funded by Erasmus+ Knowledge Alliance, N-PATH addressed the global burden of chronic kidney disease (CKD) and the shortage of nephrologists. CKD affects >850 million people worldwide, yet nephrology struggles to attract medical talent, leading to unfilled positions in residency programs. To address this, N-PATH focused on enhancing nephrology education through four specialized modules: renal expert in renal pathology (ReMAP), renal expert in vascular access (ReVAC), renal expert in medical ultrasound (ReMUS) and renal expert in peritoneal dialysis (RePED). ReMAP emphasized the importance of kidney biopsy in nephrology diagnosis and treatment, providing theoretical knowledge and hands-on training. ReVAC centred on vascular access in haemodialysis, teaching trainees about different access types, placement techniques and managing complications. ReMUS recognized the significance of ultrasound in nephrology, promoting interdisciplinary collaboration and preparing nephrologists for comprehensive patient care. RePED addressed chronic peritoneal dialysis, offering comprehensive training in patient selection, prescription, monitoring, complications and surgical techniques for catheter insertion. Overall, N-PATH's strategy involved collaborative networks, hands-on training, mentorship, an interdisciplinary approach and the integration of emerging technologies. By bridging the gap between theoretical knowledge and practical skills, N-PATH aimed to revitalize interest in nephrology and prepare proficient nephrologists to tackle the challenges of kidney diseases. In conclusion, the N-PATH program aimed to address the shortage of nephrologists and improve the quality of nephrology care in Europe. By providing specialized training, fostering collaboration and promoting patient-centred care, N-PATH aimed to inspire future nephrology professionals to meet the growing healthcare demands related to kidney diseases and elevate the specialty's status within the medical community.

RESUMEN

Introduction: This study was to examine whether inter-user haptic feedback would have a differential impact on skill acquisition based on the nature of the surgical task involved. Specifically, we hypothesized that haptic feedback would facilitate target orientation more than cutting tasks in the context of laparoscopic surgery. Methods: Ten novice participants were recruited and assigned to one of two training groups. Each group underwent six half-hour training sessions dedicated to laparoscopic pattern-cutting tasks. In the haptic group, five participants received expert guidance during the training sessions, whereas the remaining five participants in the control group engaged in self-practice. All trials were recorded on video, enabling a comparative analysis of task performance between the participants' left hand (target manipulation) and right hand (cutting task). Additionally, the number of haptic feedback instances provided to the trainees in the haptic group was recorded. Results: Practice led to a reduction in total task time, grasping time, and cutting errors. However, no significant differences were observed between the two training groups, except for the grasping time, where haptic feedback significantly reduced the grasping time compared to the control group. Moreover, the frequency of haptic feedback instances provided to the trainees was notably higher for the grasping than for the cutting task. Discussion: Our study suggests that haptic feedback has a more substantial impact on orientation tasks than on cutting tasks in laparoscopic surgery training. However, we acknowledge that a larger sample size would provide a more robust evaluation of this effect.

RESUMEN

INTRODUCTION: To help general dentistry residents better manage the intracanal broken instrument situation, we introduced a hands-on training course into the endodontic curriculum of a general dentistry residency programme. MATERIALS AND METHODS: Thirty general dentistry residents and 30 residents with endodontic specialty training background in a general hospital served as the experimental group and reference group, respectively. The experimental group underwent a training course including a 30-min lecture and two hands-on sessions (2 h each). After the course, residents from both groups were asked to perform the instrument removal procedure on simulated root canals. Success rate, procedure time and canal volume change were compared between groups. Questionnaire results were also analysed. RESULTS: All residents successfully managed to remove the broken instruments in the test. Procedure time was significantly longer for general dentistry residents (15.8 ± 5.7 min vs 13.7 ± 4.5 min, Mann-Whitney U test, p = .038). Canal volume change was significantly greater for general dentistry residents (8.53 ± 3.82 µl vs 5.94 ± 2.73 µl, independent-samples t-test, p = .004). In the questionnaires, trainees gave overall positive ratings for the course. The marginal homogeneity test on before and after scores of the questionnaire items showed the training helped the trainees to reduce the stress level associated with instrument breakage (p < .001). It also motivated the trainees to remove the broken instrument in some straightforward cases (p < .001). CONCLUSION: The broken instrument removal training course could help the general dentistry residents better manage the intracanal broken instrument situation.

Asunto(s)

RESUMEN

The Korean Society of Gastroenterology (KSG) and the Korean Society of Gastrointestinal Endoscopy (KSGE) have tried to promote high-quality patient care, and safety in the field of gastrointestinal (GI) diseases. In 2017, the training guidelines for GI fellows have been made, and the education board of KSGE revised 2 year- program of GI fellows. The guideline includes the total number of assigned patients, the number of GI endoscopy procedures, attendance of academic conferences, and research presentations. The traditional training model of GI fellowship is known as an "apprenticeship". Unfortunately, it might increase confusion between what trainees are observing and prior information. Now, practical hands-on training system using simulator helps to provide a support program for GI fellowship education. In order to facilitate training program, trainers will need to carefully plan the teaching. Therefore, it improves knowledge and performance for trainers. What we should keep in mind is that this hands-on program has the goal of making a good gastroenterologist, not just making an endoscopist. At same time, the application of cognitive education in GI fellow training must be performed. On the other side, the privileging and credentialing for endoscopic subspecialty should be made. The provision of benefits could serve as an important foundation for maintaining GI specialist board system.

Asunto(s)

RESUMEN

Online classroom lessons for agricultural and livestock personnel and instructors (animal clinical veterinarians) have been established as alternative ways of learning to allow for the social distancing required to prevent the spread of the coronavirus disease (COVID-19) that emerged and expanded in 2020. However, significant issues remain in developing ways to effectively convey experimental and practical lessons to students. Some of these challenges have been addressed by developing and implementing a new online hands-on practical training method for various veterinary subjects. Currently, online training is limited to watching videos; however, this trial has the potential to provide novel hands-on training online. In our trial, students watched live or asynchronous videos of instructors using a capture board, from which they learned hands-on practices. The learning environment of the students was transmitted by a web camera attached to their PCs and displayed on a large screen visible to the instructor. This enabled the instructor to provide the students with online instructions. In the future, Yamaguchi University's animal welfare philosophy and newly developed alternative online learning methods can be applied to education in other fields.

RESUMEN

BACKGROUND: Tracheostomy-related morbidity and mortality mainly occur due to decannulation, misplacement, or obstruction of the tube. A standardized training can improve the skills and confidence of the caregivers in tracheostomy care (TC). OBJECTIVE: Our primary aim was to evaluate the efficiency of standardized training program on the knowledge and skills (changing-suctioning the tracheostomy tube) of the participants regarding TC. MATERIALS AND METHODS: Sixty-five caregivers of children with tracheostomy were included. First, participants were evaluated with written test about TC and participated in the practical tests. Then, they were asked to participate in a standardized training session, including theoretical and practical parts. Baseline and postintervention assessments were compared through written and practical tests conducted on the same day. RESULTS: A significant improvement was observed in the written test score after the training. The median number of correct answers of the written test including 23 questions increased 26%, from 12 to 18 (p < .001). The median number of correct steps in tracheostomy tube change (from 9 to 16 correct steps out of 16 steps, 44% increase) and suctioning the tracheostomy tube (from 9 to 17 correct steps out of 18 steps, 44% increase) also improved significantly after the training (p < .001, for both). CONCLUSION: Theoretical courses and practical hands-on-training (HOT) courses are highly effective in improving the practices in TC. A standardized training program including HOT should be implemented before discharge from the hospital. Still there is a need to assess the impact of the program on tracheostomy-related complications, morbidity, and mortality in the long term.

Asunto(s)

RESUMEN

BACKGROUND: During the COVID-19 pandemic, disruption of surgical hands-on training has hampered the skills acquisition by budding neurosurgeons. Online and virtual classrooms have not been able to substitute the hands-on experience and learning via direct interaction with senior colleagues. To overcome these challenges, we organized a hybrid workshop where simulation-based learning modules, and direct and virtual interaction with surgeons during live surgeries or didactic lectures were utilized to help delegates in understanding the nuances of neurosurgery. METHODS: A 3-day hybrid workshop was held in March 2021, which was attended by 133 delegates. A structured questionnaire was utilized to record their feedback. RESULTS: An overwhelming majority of the respondents (94.1%, n = 64) found hybrid conferences to be better than an online conference. Most of the respondents (88.3%, n = 60) rated the utility of direct face-to-face interaction to be more satisfying as compared with online interaction with faculty during a webinar. Again, many the respondents (86.8%, n = 59) believed that similar hybrid events will be the new normal given the current situation of COVID-19 pandemic. A large majority (88.2%, n = 60) of the respondents reported that they will prefer a hybrid event over an online conference. CONCLUSIONS: In this era of the COVID-19 pandemic, "hybrid" microneurosurgery workshops offer unique opportunities to enhance surgical skills acquisition by hands-on simulation-based learning and observing live surgical demonstrations, apart from 2-way interactions with experts under one roof. This may be a stepping stone for what lies ahead in the future of neurosurgical training.

Asunto(s)

RESUMEN

BACKGROUND: 3D printed models of pediatric hearts with congenital heart disease have been proven helpful in simulation training of diagnostic and interventional catheterization. However, anatomically accurate 3D printed models are traditionally based on real scans of clinical patients requiring specific imaging techniques, i.e., CT or MRI. In small children both imaging technologies are rare as minimization of radiation and sedation is key. 3D sonography does not (yet) allow adequate imaging of the entire heart for 3D printing. Therefore, an alternative solution to create variant 3D printed heart models for teaching and hands-on training has been established. METHODS: In this study different methods utilizing image processing and computer aided design software have been established to overcome this shortage and to allow unlimited variations of 3D heart models based on single patient scans. Patient-specific models based on a CT or MRI image stack were digitally modified to alter the original shape and structure of the heart. Thereby, 3D hearts showing various pathologies were created. Training models were adapted to training level and aims of hands-on workshops, particularly for interventional cardiology. RESULTS: By changing the shape and structure of the original anatomy, various training models were created of which four examples are presented in this paper: 1. Design of perimembranous and muscular ventricular septal defect on a heart model with patent ductus arteriosus, 2. Series of heart models with atrial septal defect showing the long-term hemodynamic effect of the congenital heart defect on the right atrial and ventricular wall, 3. Implementation of simplified heart valves and addition of the myocardium to a right heart model with pulmonary valve stenosis, 4. Integration of a constructed 3D model of the aortic valve into a pulsatile left heart model with coarctation of the aorta. All presented models have been successfully utilized and evaluated in teaching or hands-on training courses. CONCLUSIONS: It has been demonstrated that non-patient-specific anatomical variants can be created by modifying existing patient-specific 3D heart models. This way, a range of pathologies can be modeled based on a single CT or MRI dataset. Benefits of designed 3D models for education and training purposes have been successfully applied in pediatric cardiology but can potentially be transferred to simulation training in other medical fields as well.

RESUMEN

Introduction: An important phase in surgical training is gaining experience in real human anatomical situations. When a cadaver is available it may complement the various artificial practice models. However, it is often necessary to supplement the characteristics of the cadavers with a simulation of a tumor. Our objective was to develop an easy-to-create, realistic artificial tumor-mimic model for peripheral lung tumor resection practice. Methods: In our work we injected barium sulphate enriched silicone suspension into 10 isolated, non-fixed lungs of human cadavers, through the puncture of the visceral pleura. Four lesions-apical, hilar and two peripheral-were created in each of ten specimens. After fixation CT scans were obtained and analyzed. The implanted tumor-mimics were examined after anatomical preparation and slicing. Also performed CT-guided percutaneous puncture was also performed to create the lesions in situ in two lungs of human cadavers. Results: Analyzing the CT data of 10 isolated lungs, out of 40 lesions, 34 were nodular (85.0%) and in the nodular group five were spiculated (12.5%). Satellite lesions were formed in two cases (5.0%). Relevant outflow into vessels or airway occurred in five lesions (12.5%). Reaching the surface of the lung occured in 11 lesions (27.5%). The tumor-mimics were elastic and adhered well to the surrounding tissue. The two lesions, implanted via percutaneous puncture, both were nodular and one also showed lobulated features. Conclusion: Our artificial tumor-mimics were easy to create, varied in shape and size, and with percutaneous implantation the lesions provide a model for teaching every step of a surgical procedure.

Asunto(s)

RESUMEN

BACKGROUND AND INTRODUCTION: The COVID-19 pandemic presents the challenge for medical education to teach practical skills without practical training. To provide an alternative to hands-on training during the COVID-19 lockdown, we created a virtual curriculum to teach practical skills using videos combined with online exams on a virtual e­learning platform. The goal was to convey different theoretical and practical aspects of urology. MATERIALS AND METHODS: The videos were produced by department employees using a predefined concept. The students had access to the virtual curriculum via the university's Moodle e­learning platform. To assess the success of training, participating students had to pass an online exam about the curriculum's contents, followed by an evaluation of the course. RESULTS: A total of 164 participants took part in the virtual curriculum. The overall evaluation and feedback was very positive. The acceptance of the virtual alternative to hands-on teaching was high. DISCUSSION: The virtual curriculum offered a fast and contactless alternative to the regular hands-on teaching.

Asunto(s)

RESUMEN

INTRODUCTION AND OBJECTIVES: Standardization of hands-on training (HoT) has profoundly impacted the educational field in the last decade. To provide quality training sessions on a global scale, the European School of Urology Training group developed a teaching guide for tutors in 2015. Our study aims to understand whether this guide alone can provide information enough to match the performance improvement guaranteed by an expert tutor. MATERIAL AND METHODS: 4 randomized groups of participants underwent HoT sessions with different teaching modalities: an expert surgeon (group 1), an expert E-BLUS tutor (group 2), E-BLUS guide alone (group 3), no tutor (group 4). Groups 1 and 2 were respectively provided with two different tutors to avoid biases related to personal tutor ability. Along the training session, each participant could perform five trials on two E-BLUS tasks: Peg transfer and Knot tying. During trials 1 and 5, completion time and number of errors were recorded for analysis with Pi-score algorithm. The average per-group Pi-scores were then compared to measure different performance improvement results. RESULTS: 60 participants from Italy were enrolled and randomized into four groups of 15. Pi-scores recorded on Peg transfer task were 24,6 (group 1), 26,4 (group 2), 42,2 (group 3), 11,7 (group 4). Pi-scores recorded on Knot tying task were 33,2 (group 1), 31,3 (group 2), 37,5 (group 3), 18,6 (group 4). CONCLUSION: Compared to a human tutor, standardized teaching with the EBLUS guide may produce similar performance improvement. This evidence opens doors to automated teaching and to several novelties in hands-on training.

Asunto(s)