RESUMEN

Melanins are heterogenous biopolymers produced by many macro and microorganisms. They enhance the ecological fitness of the producer organisms by improving their virulence and protecting them from radiation, osmotic and heat stresses. Fungi synthesise either DOPA or DHN melanin and deposit them on their cell walls. Some fungal isolates produce water soluble melanin (pyomelanin) which is excerted out of the hyphae into the surrounding environment. Pyomelanin, a polymer of homogentisate, exhibits antimicrobial, UV screening, antioxidative, and anti-inflammatory activities and recent studies also show that pyomelanin could find use in space travel as radiation shield. However, scant literature is available on fungi with ability to produce pyomelanin. We report for the first time that Amorosia littoralis occurs as a root endophyte in mangrove species including Avicennia marina, Bruguiera cylindrica and Bruguiera gymnorhiza and produces pyomelanin. Considering the various technological uses of pyomelanin, this study underscores the need to explore fungi of different habitats to identify hyperproducers and to obtain chemically diverse pyomelanin.

Asunto(s)

RESUMEN

Natural pigments are becoming increasingly popular owing of their reliability. Microbial pigments provide an alternative to natural colours. A total of 24 fungal cultures were collected from leaf bits of Senna auriculata, with one strain (FNG1) producing an extracellular red orange pigment. Nigrospora oryzae was confirmed by using physical criteria and molecular phylogenetic study by using ITS and ß- tubulin analysis. In EtOAc, the crude red pigment was the most soluble. The TLC analysis was used to partly purify the natural pigment. The partially purified fungal pigment was used in successive bioprospecting studies. The antimicrobial activity of the partially purified sample was assessed against eight human pathogens, with Leucobacter AA7 showing the largest zone of inhibition (200-500 µg/mL). The compound's DPPH scavenging activity enhanced from 38.2 to 67.9%, with an IC50 value of 34.195 ± 2.33 µg/mL. Cancer cells were suppressed by partly pure fungal pigment, but non-cancerous HEK 293 cells were unaffected. The GC-MS analysis was used to characterize the molecule present in the partly purified pigment. In addition, the cotton textiles have the greatest staining capability for crude mycobial pigment, which dyes quickly and has a negative cytotoxicity. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-024-01211-y.

RESUMEN

Scytalidium ganodermophthorum (telomorph: Xylogone ganodermopthora) Kang, Sigler, Lee & Yun is a destructive fungal pathogen that produces a yellow pigment that is used in sustainable product development. Similar pigmenting ascomycetes cause soft rot in woody substrates, however, the decay capabilities of S. ganodermophthorum have not been assessed or related to pigment production. A wood block decay test showed highly variable production of the expected bright yellow pigment and a secondary darker pigment when tested against multiple wood species and nutrient conditions. Microscopic examination showed cell wall erosion typical of type-2 soft rot in wood, although enzymatic analysis did not show detectible levels of endocellulase. Chitinase was detected in plate cultures but not wood cultures, indicating adaption of the fungus to a variety of environmental growth conditions. The high variability of pigmentation in wood cultures suggests that growth of S. ganodermophthorum on liquid media and use of extracted pigment is a superior method for obtaining consistent yellow coloration.

RESUMEN

Penazaphilones J-L (1-3), three new hydrophilic azaphilone pigments, as well as six known compounds, were discovered from the filamentous fungus Penicillium sclerotiorum cib-411. Compounds 1-3 were structurally elucidated by the detailed interpretation of their 1D and 2D NMR spectroscopic data. Compound 1 is an unprecedented hybrid of an azaphilone and a glycerophosphate choline. Compounds 2 and 3 each contain an intact amino acid moiety. The bioassay showed that compound 3 exhibited significant anti-inflammatory activity. Concretely, compound 3 significantly suppressed the NO production, the expression levels of COX-2, IL-6, IL-1ß, and iNOS mRNA in LPS-stimulated RAW264.7 cells. Moreover, treatment of compound 3 prevented the translocation of NF-κB through inhibiting the phosphorylation of PI3K, PDK1, Akt, and GSK-3ß. Thus, the inhibition of compound 3 against LPS-induced inflammation should rely on its inactivation on NF-κB.

Asunto(s)

RESUMEN

Fungal colorants are gradually entering the global color market, given their advantages of being less harmful to human health, as well as having greater stability and biotechnological potential, compared to other natural sources. The present work concerns the isolation and identification of an endophytic filamentous fungus, together with the chemical characterization and assessment of the fluorescence, toxicity, stability, and application potential of its synthesized red colorant. The endophytic fungus was isolated from Hymenaea courbaril, a tree from the Brazilian savannah, and was identified as Talaromyces minnesotensis by phenotypic and genotypic characterization. Submerged cultivation of the fungus resulted in the production of approximately 12 AU500 of a red biocolorant which according to LC-DAD-MS analysis is characterized by being a complex mixture of molecules of the azaphilone class. Regarding cytotoxicity assays, activity against human hepatoblastoma (HepG2) cells was only observed at concentrations above 5.0 g L-1, while antimicrobial effects against pathogenic bacteria and yeast occurred at concentrations above 50.0 g L-1. The biocolorant showed high stability at neutral pH values and low temperatures (10 to 20 °C) and high half-life values (t1/2), which indicates potential versatility for application in different matrices, as observed in tests using detergent, gelatin, enamel, paint, and fabrics. The results demonstrated that the biocolorant synthesized by Talaromyces minnesotensis has potential for future biotechnological applications. KEY POINTS: • An endophytic fungus, which was isolated and identified, synthesize a red colorant. • The colorant showed fluorescence property, low toxicity, and application potential. • The red biocolorant was highly stable at pH 8.0 and temperatures below 20°C.

Asunto(s)

RESUMEN

The present study explores natural pigments as sustainable alternatives to synthetic textile dyes. Due to their therapeutic applications and easy production, fungal pigments have gained attention. However, data on pigment production using solid-state fermentation and optimization is limited. Milk whey was used to grow Talaromyces sp., followed by an evaluation of pigment production in solid and liquid media. Pineapple peels were used as a cost-effective substrate for pigment production, and a one-factor-at-a-time approach was used to enhance pigment production. Pineapple peel-based media produced 0.523 ± 0.231 mg/g of pigment after eight days of incubation. The crude pigment had promising antibacterial and significant antioxidant properties. The extraction fungal pigment's possible use as an eco-friendly textile dye was assessed through fabric dyeing experiments with different mordants. This work contributes to the valorization of agricultural waste and provides insight into using fungal pigments as sustainable alternatives to synthetic textile dyes.

Asunto(s)

RESUMEN

BACKGROUND: Melanin is a natural pigment that can be applied in different fields such as medicine, environment, pharmaceutical, and nanotechnology. Studies carried out previously showed that the melanin produced by the mel1 mutant from Aspergillus nidulans exhibits antioxidant, anti-inflammatory, and antimicrobial activities, without any cytotoxic or mutagenic effect. These results taken together suggest the potential application of melanin from A. nidulans in the pharmaceutical industry. In this context, this study aimed to evaluate the effect of factors L-tyrosine, glucose, glutamic acid, L-DOPA, and copper on melanin production by the mel1 mutant and to establish the optimal concentration of these factors to maximize melanin production. RESULTS: The results showed that L-DOPA, glucose, and copper sulfate significantly affected melanin production, where L-DOPA was the only factor that exerted a positive effect on melanin yield. Besides, the tyrosinase activity was higher in the presence of L-DOPA, considered a substrate required for enzyme activation, this would explain the increased production of melanin in this condition. After establishing the optimal concentrations of the analyzed factors, the melanin synthesis was increased by 640% compared to the previous studies. CONCLUSIONS: This study contributed to elucidating the mechanisms involved in melanin synthesis in A. nidulans as well as to determining the optimal composition of the culture medium for greater melanin production that will make it possible to scale the process for a future biotechnological application.

Asunto(s)

RESUMEN

An effective identification and discovery of fungal pigments is very important to illustrate the role of fungal pigments in the life process and conduce to the discovery of new bioactive and edible pigments. The phenotype combined with metabolomic and genomic (PMG) strategy led to the discovery and characterization of three new sorbicillinoid pigments, stasorbicillinoids A-C (1-3), and five known analogues (4-8) from the sponge-derived fungus Stagonospora sp. SYSU-MS7888. Their structures were elucidated by the application of spectroscopic methods (NMR, MS, UV, IR, and ECD) and modified Mosher's method. Compounds 1 and 2 featured novel naphthone nuclei linked by two alkyl side chains possibly undergoing inter- and intramolecular Michael reactions. Compounds 1-8 exhibited potent anti-inflammatory activity with IC50 values in the range of 3.56-22.8 µM. Furthermore, compound 2 inhibited the production of IL-1ß, IL-6, and TNF-α in a dose-dependent manner. This study provides an effective strategy to accelerate the discovery of new fungal pigments and further exploration of their potential applications in different fields such as medicine and food industries.

Asunto(s)

RESUMEN

Recently, the demand for fungal pigments has increased due to their several benefits over synthetic dyes. Many species of fungi are known to produce pigments and a large number of fungal strains for pigment production are yet to be extensively investigated. The natural pigment from sustainable natural sources has good economic and industrial value. Many synthetic colorants used in textile and various industries have many harmful effects on the human population and environment. Pigments and coloring agents may be extracted from a wide range of fungal species. These compounds are among the natural compounds having the most significant promise for medicinal, culinary, cosmetics, and textile applications. This study attempts to isolate and optimize the fermentation conditions of Penicillium sclerotiorum strain AK-1 for pigment production. A dark yellow-colored pigment was isolated from the strain with significant extractive value and antioxidant capacity. This study also identifies that the pigment does not have any cytotoxic effect and is multicomponent. The pigment production was optimized for the parameters such as pH, temperature, carbon and nitrogen source. Fabric dyeing experiments showed significant dyeing capacity of the pigment on cotton fabrics. Accordingly, the natural dye isolated from P. sclerotiorum strain AK-1 has a high potential for industrial-scale dyeing of cotton materials.

Asunto(s)

RESUMEN

Spalting fungal pigments have shown potential in technologies ranging from green energy generation to natural colorants. However, their unknown toxicity has been a barrier to industrial adoption. In order to gain an understanding of the safety of the pigments, zebrafish embryos were exposed to multiple forms of liquid media and solvent-extracted pigments with concentrations of purified pigment ranging from 0 to 50 mM from Chlorociboria aeruginosa, Chlorociboria aeruginascens, and Scytalidium cuboideum. Purified xylindein from Chlorociboria sp. did not show toxicity at any tested concentration, while the red pigment dramada from S. cuboideum was only associated with significant toxicity above 23.2 uM. However, liquid cultures and pigment extracted into dichloromethane (DCM) showed toxicity, suggesting the co-production of bioactive secondary metabolites. Future research on purification and the bioavailability of the red dramada pigment will be important to identify appropriate use; however, purified forms of the blue-green pigment xylindein are likely safe for use across industries. This opens the door to the adoption of green technologies based on these pigments, with potential to replace synthetic colorants and less stable natural pigments.

RESUMEN

Demand for microbial colorants is now becoming a competitive research topic for food, cosmetics and pharmaceutics industries. In most applications, the pigments of interest such as polyketide-based red pigments from fungal submerged cultures are extracted by conventional liquid-liquid extraction methods requiring large volumes of various organic solvents and time. To address this question from a different angle, we proposed, here, to investigate the use of three different aqueous two-phase extraction systems using either ammonium- or imidazolium-based ionic liquids. We applied these to four fermentation broths of Talaromyces albobiverticillius (deep red pigment producer), Emericella purpurea (red pigment producer), Paecilomyces marquandii (yellow pigment producer) and Trichoderma harzianum (yellow-brown pigment producer) to investigate their selective extraction abilities towards the detection of polyketide-based pigments. Our findings led us to conclude that (i) these alternative extraction systems using ionic liquids as greener extractant means worked well for this extraction of colored molecules from the fermentation broths of the filamentous fungi investigated here; (ii) tetrabutylammonium bromide, [N4444]Br-, showed the best pigment extraction ability, with a higher putative affinity for azaphilone red pigments; (iii) the back extraction and recovery of the fungal pigments from ionic liquid phases remained the limiting point of the method under our selected conditions for potential industrial applications. Nevertheless, these alternative extraction procedures appeared to be promising ways for the detection of polyketide-based colorants in the submerged cultures of filamentous fungi.

RESUMEN

Identification of effective natural dyes with the potential for low environmental impact has been a recent focus of the textile industry. Pigments derived from spalting fungi have previously shown promise as textile dyes; however, their use has required numerous organic solvents with human health implications. This research explored the possibility of using linseed oil as a carrier for the pigment from Scytalidium cuboideum as a textile dye. Colored linseed oil effectively dyed a range of fabrics, with natural fibers showing better coloration. Scanning electron microscopy (SEM) revealed a pigment film over the fabric surface. While mechanical testing showed no strength loss in treated fabric, colorfastness tests showed significant changes in color in response to laundering and bleach exposure with variable effects across fabric varieties. SEM investigation confirmed differences in pigmented oil layer loss and showed variation in pigment crystal formation between fabric varieties. Heating of the pigmented oil layer was found to result in a bright, shiny fabric surface, which may have potential for naturally weatherproof garments.

RESUMEN

Some of the most important natural pigments have been produced from fungi and used for coloring in food, cosmetics, textiles, and pharmaceutical products. Forty-seven isolates of endophytic fungi were isolated from Cinnamomum zeylanicum in northern Thailand. Only one isolate, CMU-ZY2045, produced an extracellularly red pigment. This isolate was identified as Nigrospora aurantiaca based on morphological characteristics and the molecular phylogenetic analysis of a combined four loci (large subunit and internal transcribed spacer of ribosomal DNA, ß-tubulin, and translation elongation factor 1-alpha genes). The optimum conditions for red pigment production from this fungus were investigated. The results indicated that the highest red pigment yield was observed in the liquid medium containing glucose as a carbon source and yeast extract as a nitrogen source, at a pH value of 5.0 and at 27 °C with shaking for 5 days. The crude red pigment revealed the highest level of solubility in methanol. A fungal red pigment was found to have high stability at temperatures ranging from 20 to 50 °C and pH values at a range of 5.0-6.0. Based on liquid chromatography-mass spectrometry analyses, the red pigment was characterized as bostrycin. The extracted pigment was used for the textile dyeing process. Crude fungal red pigment revealed the highest staining ability in cotton fabrics and displayed excellent fastness to washing, which showing negative cytotoxicity at the concentrations used to cell culture. This is the first report on bostrycin production from N. aurantiaca.

Asunto(s)

RESUMEN

Filamentous fungi have gained growing interest as sources of diverse pigmented secondary metabolites. Some specific polyketides from Ascomycetous species have demonstrated a wide range of industrial applications in food, cosmetic, textile, and in the design of pharmaceutical products. The formulation of recipes containing fungal polyketides has increased over recent years. Fusarium strains were proven useful to mankind in a variety of technologies. Nevertheless, there is still need of new isolates of Fusarium for use in emerging and already existing fields. In this article, we report the concomitant production of the bioactive red bikaverin along with two novel purple pigments by the phytopathogenic Fusarium oxysporum LCP531 strain isolated from soil. In literature, the production of purple pigment had only been described in cultures of Fusarium Fujikuroi, Fusarium verticillioides, and Fusarium graminearum. The production of these naphthoquinonic pigments, their distribution (either produced in mycelia or excreted in liquid medium) and their chemical profiles were investigated with respect to nutrient composition. The pigments were extracted by using a pressurized liquid extraction method, monitored by colorimetric analysis and characterized by HPLC-DAD chromatography. To our knowledge, this is the first report of these two novel wild-type purple naphtoquinones pigments along with bikaverin, where additionally, the culture conditions were put into perspective to optimize fermentation cultures and extraction process accordingly to the pigment/biomolecule desired. These colored naphthoquinones should be promising fungal functional compounds which could be expected to have a place of choice, along with other antibacterial, antifungal, antiviral, anticancer, and antineoplastic derivatives. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2738, 2019.

Asunto(s)

RESUMEN

Pigments from wood-decay fungi (specifically spalting fungi) have a long history of use in wood art, and have become relevant in modern science due to their longevity and colorfastness. They are presently under investigation as colorants for wood, bamboo, oils, paints and textiles. Major hurdles to their commercialization have been color repeatability (in that the same strain of the same species of fungus may produce different colors over time), and the binding of the pigments to glass storage containers. This is persistent as they do not naturally exist in a loose form. Due to these issues, the 'standard' color for each was historically determined not by the amount of pigment, but by the color in a solution of dichloromethane (DCM), using the CIE L*a*b colorspace. This method of standardization severely limited the use of these pigments in industrial applications, as without a dry form, standard methodologies for repeatable color processing into other materials could not be easily implemented. Recent studies have developed a method to crystalize the red pigment from Scytalidium cuboideum (Sacc. & Ellis) Sigler & Kang, producing a highly pure (99%) solid crystal named 'Dramada'. Herein a method is detailed to compare the molarity of this crystallized pigment to variations in the color, to determine a color saturation curve (by weight) for the pigment from S. cuboideum in DCM and acetone. The molarities for this experiment ranged from 0.024 mM to 19 mM. Each molarity was color read and assigned a CIEL*a*b* value. The results showed that there was a correlation between the molarity and color difference, with the maximum red color occurring between 0.73 mM and 7.3 mM in DCM and between 0.97 mM to 0.73 mM in acetone. Extremely low molarities of pigment produced strong coloration in the solvent, and changes in molarity significantly affected the color of the solution. Having a saturation and color curve for the crystal 'Dramada' from S. cuboideum will allow for the reliable production of distinct colors from a known quantity (by weight) of pigment, erasing the final hurdle towards commercial development of the crystallized pigment from S. cuboideum as an industrial dyestuff.

Asunto(s)

RESUMEN

The production of water-soluble pigments by fungal strains indigenous to South Korea was investigated to find those that are highly productive in submerged culture. Among 113 candidates, 34 strains that colored the inoculated potato dextrose agar medium were selected. They were cultured in potato dextrose broth and extracted with ethanol. The productivity, functionality (radical-scavenging activities), and color information (CIELAB values) of the pigment extracts were measured. Five species produced intense yellowish pigments, and two produced intense reddish pigments that ranked the highest in terms of absorbance units produced per day. The pigment extracts of Penicillium miczynskii, Sanghuangporus baumii, Trichoderma sp. 1, and Trichoderma afroharzianum exhibited high radical-scavenging activity. However, the S. baumii extract showed moderate toxicity in the acute toxicity test, which limits the industrial application of this pigment. In conclusion, P. miczynskii KUC1721, Trichoderma sp. 1 KUC1716, and T. afroharzianum KUC21213 were the best fungal candidates to be industrial producers of safe, functional water-soluble pigments.

RESUMEN

The production of water-soluble pigments by fungal strains indigenous to South Korea was investigated to find those that are highly productive in submerged culture. Among 113 candidates, 34 strains that colored the inoculated potato dextrose agar medium were selected. They were cultured in potato dextrose broth and extracted with ethanol. The productivity, functionality (radical-scavenging activities), and color information (CIELAB values) of the pigment extracts were measured. Five species produced intense yellowish pigments, and two produced intense reddish pigments that ranked the highest in terms of absorbance units produced per day. The pigment extracts of Penicillium miczynskii, Sanghuangporus baumii, Trichoderma sp. 1, and Trichoderma afroharzianum exhibited high radical-scavenging activity. However, the S. baumii extract showed moderate toxicity in the acute toxicity test, which limits the industrial application of this pigment. In conclusion, P. miczynskii KUC1721, Trichoderma sp. 1 KUC1716, and T. afroharzianum KUC21213 were the best fungal candidates to be industrial producers of safe, functional water-soluble pigments.

Asunto(s)

RESUMEN

The use of ascomycetous fungi as pigment producers opens the way to an alternative to synthetic dyes, especially in the red-dye industries, which have very few natural pigment alternatives. The present paper aimed to bio-prospect and screen out 15 selected ascomycetous fungal strains, originating from terrestrial and marine habitats belonging to seven different genera (Penicillium, Talaromyces, Fusarium, Aspergillus, Trichoderma, Dreschlera, and Paecilomyces). We identified four strains, Penicillium purpurogenum rubisclerotium, Fusarium oxysporum, marine strains identified as Talaromyces spp., and Trichoderma atroviride, as potential red pigment producers. The extraction of the pigments is a crucial step, whereby the qualitative and quantitative compositions of each fungal extract need to be respected for reliable identification, as well as preserving bioactivity. Furthermore, there is a growing demand for more sustainable and cost-effective extraction methods. Therefore, a pressurized liquid extraction technique was carried out in this study, allowing a greener and faster extraction step of the pigments, while preserving their chemical structures and bioactivities in comparison to conventional extraction processes. The protocol was illustrated with the production of pigment extracts from P. purpurogenum rubisclerotium and Talaromyces spp. Extracts were analyzed by high-performance liquid-chromatography combined with photodiode array-detection (HPLC-DAD) and high-resolution mass spectrometry (UHPLC-HRMS). The more promising strain was the isolate Talaromyces spp. of marine origin. The main polyketide pigment produced by this strain has been characterized as N-threoninerubropunctamine, a non-toxic red Monascus-like azaphilone pigment.

RESUMEN

In this study, the combined effect of pH, temperature and agitation speed on yellow pigment production and mycelial growth of Penicillium aculeatum ATCC 10409 was investigated in whey media. Different pH levels (5, 6.5 and 8), temperatures (25, 30 and 35°C) and agitation speed levels (100 and 150 rpm) were tested to determine the best conditions to produce a fungal yellow pigment under submerged fermentation. The best production of yellow pigment (1.38 g/L) was obtained with a pH value of 6.5, a temperature of 30°C and an agitation speed of 150 rpm. In contrast, the maximal biomass concentration (11.12 g/L) was obtained at pH value of 8, a temperature of 30°C and an agitation speed of 100 rpm. These results demonstrated that biomass and yellow pigment production were not directly associated. The identification of the structure of unknown P. aculeatum yellow pigment was detected using UV absorption spectrum and FT-IR spectroscopy.

Asunto(s)