RESUMEN

Background: The design of femoral stem prostheses requires a precise understanding of the femoral marrow cavity. Traditional measurements of morphological parameters in the upper femur, particularly the medullary cavity and cortical region, are primarily based on coronal and sagittal axes, which may not fully capture the true three-dimensional structure of the femur. Methods: Propose a Monte Carlo-based method for a more comprehensive analysis of the femoral marrow cavity, using CT scans of femurs from a selected group of patients. The study aimed to define and calculate anatomically semantic morphological parameters to enhance the understanding of the femoral marrow cavity's anatomical morphological changes, ultimately improving the design and clinical selection of femoral stem prostheses. To enhance the accuracy of femoral stem prosthesis design, this study aims to develop a Monte Carlo-based method for a more comprehensive analysis of the femoral marrow cavity. The proposed method transforms the non-random problem of determining cross-sectional size into a random issue, allowing for the calculation of the size of the medullary cavity and cortical region. Anatomically semantic morphological parameters are then defined, calculated, and analyzed. Results: The experimental results indicate that the newly defined parameters complement existing ones, providing a more rational scientific basis for understanding the anatomical morphological changes of the femoral marrow cavity. Conclusion: This research offers essential scientific theoretical support for improved morphologic research, design, and clinical selection of femoral stem prostheses. It holds significant importance and application value in clinical practice, contributing to a more accurate and comprehensive understanding of femoral anatomy for prosthetic design.

RESUMEN

Introduction: The incidence of periprosthetic fractures (PPF) around a total hip arthroplasty continues to increase with the rise in number of arthroplasties performed. However, fracture of the femoral stem has become very rare since the development of modern prosthetic designs. We present a rare case of an 80-year-old man who sustained a periprosthetic femur fracture with a fracture of the femoral stem component around a bipolar hemiarthroplasty. Case Report: This man sustained a Vancouver type B1 periprosthetic femur fracture with a fracture of the femoral stem component around a fully cemented bipolar hemiarthroplasty done 10 years back. This patient was treated with removal of the broken femoral stem and osteosynthesis with a plate and cerclage wire plus revision to a longer stem prosthesis. Conclusion: PPF with a fracture of the femoral stem around a hemiarthroplasty is a rare and uncommon occurrence. A combination of osteosynthesis with revision arthroplasty with a longer stem proved to be a suitable treatment with satisfactory results. However, regular follow-ups post-arthroplasties are advocated to identify complications at an earlier stage.

RESUMEN

Background: Total hip arthroplasty (THA) in patients with hypoplastic femurs presents a significant challenge to orthopedic surgeons due to the limited space available for implant placement. Therefore, the extra-small femoral stems have been proposed as a solution to this problem, but there are limited data on the outcomes. We aimed to evaluate clinical and radiological outcomes of THA in patients with extremely hypoplastic femurs using the Bencox CM stem (Corentec), an extra-small femoral stem. Methods: We included 6 hips from 4 patients. The mean age of the patients was 41.2 years (range, 19.6-60.4 years). The mean height was 135.1 cm (range, 113.6-150.0 cm) with a mean body mass index of 25.7 kg/m2 (range, 21.3-31.1 kg/m2). The diagnoses for THA were sequelae of septic arthritis in childhood, pseudoachondroplasia, spondyloepiphyseal dysplasia, and juvenile rheumatoid arthritis. Preoperative computed tomography scans were conducted to assess the extent of proximal femoral hypoplasia. The clinical outcomes were assessed using the modified Harris Hip Score, while the radiological outcomes were evaluated using radiographs. The mean follow-up was 2.3 years (range, 1.0-5.9 years). Results: The average modified Harris Hip Score improved to 88.8 at the final follow-up. Intraoperative femoral fractures occurred in 2 cases (33.3%). During the follow-up, 1 stem underwent varus tilting from postoperative 6 weeks to 6 months without subsidence. Otherwise, all stems showed good osteointegration at the latest follow-up. No hip dislocations, periprosthetic joint infection, or loosening of the prosthesis occurred. Conclusions: The use of extra-small femoral stems in THA for extremely hypoplastic femurs can provide reasonable clinical and radiological outcomes with minimal complications. We suggest that this femoral stem could be a viable option for patients with extremely hypoplastic femurs.

Asunto(s)

RESUMEN

This study aims to answer the question: Which are superior-conventional or short femoral stems?. An Optymis stem was used as a short-femoral stem, and an Accolade II stem was used as a conventional-femoral stem. There were 95 patients in the short femoral stem group (Group 1) and 90 in the conventional stem group (Group 2). The SF-36 Life Quality Score, thigh pain, and the Harris Hip Score were used to evaluate the patients' clinical outcomes. Pre-operative, immediate post-operative, and final follow-up x-rays were used for radiological evaluation. Stem varus/valgus alignment, hip offset changing, acetabular anteversion/inclination changing, femoral migration, acetabular migration, periarticular ossification, and osteointegration evaluation were assessed for both groups. The mean follow-up time was 5.5 years for Group 1 and 5.2 years for Group 2. No significant difference existed between the two groups in terms of clinical scores (Harris Hip Score, SF-36). Thigh pain was significantly higher in Group 2 (p = 0.0001). As for radiological parameters, Group 1 exhibited more varus position-related results. In terms of angular stability, Group 1 was found to be more unstable than Group 2 (p = 0.0001). The power to reconstruct femoral offset was superior in Group 1. Periarticular ossification was more frequent in Group 2. Femoral osteointegration was denser proximally in Group 1 and distally in Group 2. When mid-term radiological and clinical results of both femoral stems are evaluated, they have no superiority over each other.

Asunto(s)

RESUMEN

OBJECTIVE: The incidence of periprosthetic fractures after total hip arthroplasty using a short tapered-wedge stem is high. Callus formation preceding this fracture, which indicates postoperative stress fracture around the stem, has been reported. However, previous studies on postoperative callus are limited. Hence, the current study aimed to evaluate the prevalence and risk factors of postoperative callus after total hip arthroplasty with a short tapered-wedge stem. MATERIALS AND METHODS: This retrospective study included 127 patients who underwent total hip arthroplasty using a cementless short tapered-wedge stem. The depth of stem insertion was measured as the distance from the lateral corner of the stem to the most medial point of the lesser trochanter along the body axis. Postoperative callus was defined as a bridging callus on the lateral femoral cortex at the distal end of the porous coating of the stem. Plain radiography was performed before surgery and immediately and at 1, 3, and 6 months after surgery to assess postoperative callus. Univariate and multivariate logistic regression analyses were performed to identify the risk factors for PC. RESULTS: In total, 60 (47.2%) of 127 patients presented with postoperative callus. Multivariate logistic regression analysis with postoperative callus as the dependent variable revealed that the stem depth at 1 month after total hip arthroplasty (odds ratio, 1.14; 95% confidence interval, 1.04-1.24, p = 0.002) was a significant and independent risk factor of postoperative callus. CONCLUSION: Deep insertion of a short tapered-wedge stem is a risk factor for postoperative callus.

RESUMEN

Stress shielding and aseptic loosening are complications of short stem total hip arthroplasty, which may lead to hardware failure. Stems with increased porosity toward the distal end were discovered to be effective in reducing stress shielding, however, there is a lack of research on optimized porous distribution in stem's coating. This study aimed to optimize the distribution of the coefficient of friction of a metaphyseal femoral stem, aiming for reducing stress shielding in the proximal area. A finite element analysis model of an implanted, titanium alloy short-tapered wedge stem featuring a porous coating made of titanium was designed to simulate a static structural analysis of the femoral stem's behavior under axial loading in Analysis System Mechanical Software. For computational feasibility, 500 combinations of coefficients of friction were randomly sampled. Increased strains in proximal femur were found in 8.4% of the models, which had decreased coefficients of friction in middle medial areas of porous coating and increased in lateral proximal and lateral and medial distal areas. This study reported the importance of the interface between bone and middle medial and distal lateral areas of the porous coating in influencing the biomechanical behavior of the proximal femur, and potentially reducing stress shielding.

Asunto(s)

RESUMEN

BACKGROUND: Hip offset, version, and length are interdependent femoral variables which determine stability and leg length. Balancing these competing variables remains a core challenge in hip arthroplasty. The potential benefits of modular femoral stems have been overshadowed by higher rates of failure. The objective of this study was to assess the survivorship of a unique dual-modular femoral stem at an average 15-year follow-up period. METHODS: The records of all patients with osteoarthritis who underwent primary total hip arthroplasty with this device between 2004-2009 were reviewed. There were no exclusions for BMI or other factors. We examined the data with Kaplan-Meier survival analysis. The primary endpoint for survival was mechanical failure of the modular neck-body junction. RESULTS: The survivorship of this device in 172 subjects was 100% with none experiencing mechanical failure of the modular junction at an average of 15 years. 60 patients died of causes unrelated to their THA and 9 patients were lost to follow-up. There were three early (≤ 12 months) dislocations (1.7%), and seven total dislocations (4.1%). 16 patients underwent reoperations during the follow-up period, none for any complication of the modular junction. Radiographic results showed well-fixed femoral stems in all cases. There were no leg length discrepancies of greater than 10 mm, and 85% were within 5 mm. CONCLUSION: There were no mechanical failures of the modular junction in any of the subjects over the average 15-year period, demonstrating that this dual-modular design is not associated with increased failure rates. We achieved a 1.7% early dislocation rate and a 4.1% total dislocation rate without any clinically significant leg length discrepancies.

Asunto(s)

RESUMEN

BACKGROUND: In recent years, there has been an increase in the number of total hip arthroplasty procedures in the younger patient population. This active group has higher expectations of their prosthesis in comparison to the older population, and there is a greater physical demand for the prosthesis. Short femoral stems were introduced to retain proximal bone stock and joint biomechanics and became more common to implant in this specific population. Currently, the long-term survival and functional outcomes of various short stems are still being investigated in different clinics. AIM: To determine the 5-year survival of the Optimys hip stem. METHODS: This was a prospective multicenter cohort study of 500 patients conducted in two hospitals in the Netherlands. All patients received the Optimys short stem (Mathys Ltd, Bettlach, Switzerland). The primary outcome measure was survival of the hip stem, with revision as the endpoint. The secondary outcome measurements included patient-reported outcome measures (PROMs). Kaplan-Meier analysis was used to calculate the 5-year survival rate. Log-minus-log transformation was performed to calculate the 95% confidence interval (95%CI). Mixed model analyses were performed to assess the course of the PROMs during the 1st 2 years after surgery. Analyses were modeled separately for the 1st and 2nd years to calculate the yearly change in PROMs during both follow-up periods with accompanying 95%CIs. RESULTS: The mean age of the total 500 patients was 62.3 years (standard deviation: 10.6) and 202 were male (40%). At a median follow-up of 5.5 years (interquartile range: 4.5-6.7), 7 patients were deceased and 6 revisions were registered, for infection (n = 3), subsidence (n = 2) and malposition (n = 1). This resulted in an overall 5-year survival of 98.8% (95%CI: 97.3-99.5). If infection was left out as reason for revision, a stem survival of 99.4% (95%CI: 98.1-99.8) was seen. Baseline questionnaires were completed by 471 patients (94%), 317 patients (63%) completed the 1-year follow-up questionnaires and 233 patients (47%) completed the 2-year follow-up. Both outcome measures significantly improved across all domains in the 1st year after the operation (P < 0.03 for all domains). In the 2nd year after surgery, no significant changes were observed in any domain in comparison to the 1-year follow-up. CONCLUSION: The Optimys stem has a 5-year survival of 98.8%. Patient-reported outcome measures increased significantly in the 1st postoperative year with stabilization at the 2-year follow-up.

RESUMEN

BACKGROUND: Uncemented femoral stem insertion into the bone is achieved by applying successive impacts on an inserter tool called "ancillary". Impact analysis has shown to be a promising technique to monitor the implant insertion and to improve its primary stability. METHOD: This study aims to provide a better understanding of the dynamic phenomena occurring between the hammer, the ancillary, the implant and the bone during femoral stem insertion, to validate the use of impact analyses for implant insertion monitoring. A dynamic 3-D finite element model of the femoral stem insertion via an impaction protocol is proposed. The influence of the trabecular bone Young's modulus (Et), the interference fit (IF), the friction coefficient at the bone-implant interface (µ) and the impact velocity (v0) on the implant insertion and on the impact force signal is evaluated. RESULTS: For all configurations, a decrease of the time difference between the two first peaks of the impact force signal is observed throughout the femoral stem insertion, up to a threshold value of 0.23 ms. The number of impacts required to reach this value depends on Et, v0 and IF and varies between 3 and 8 for the set of parameters considered herein. The bone-implant contact ratio reached after ten impacts varies between 60% and 98%, increases as a function of v0 and decreases as a function of IF, µ and Et. CONCLUSION: This study confirms the potential of an impact analyses-based method to monitor implant insertion and to retrieve bone-implant contact properties.

Asunto(s)

RESUMEN

BACKGROUND: Modular neck femoral stems are advantageous because they can accurately restore the ideal hip geometry using various options in terms of offset, length, and version. However, there are concerns regarding junctional problems. Despite several reports on such issues, there is a lack of study on mid- to long-term results of these stems. The current study evaluated the mid-term results of patients who underwent primary total hip arthroplasty using a titanium-titanium (Ti-Ti) modular neck femoral stem. METHODS: In total, data on 47 hips (42 patients) that could be followed-up for ≥ 5 years after primary total hip arthroplasty using the Ti-Ti modular neck femoral stem from 2011 to 2015 were reviewed. There were 22 male and 20 female patients, and their mean age was 56.3 (range: 31-76) years. The mean follow-up period was 8 (range: 5-12) years. Functional and radiological outcomes, complications, and reoperations were investigated. In addition, we conducted a comparative analysis of the outcomes between those who underwent surgery using the Ti-Ti modular neck femoral stem and 41 hips (35 patients, 19 males and 16 females) that underwent primary total hip arthroplasty using nonmodular femoral stems as a control. RESULTS: In all Ti-Ti cases, the mean Harris Hip Scores were 50.6 (range: 6-59) preoperatively and 92.7 (range: 78-99) at the last follow-up (P < 0.001). Regarding the neck component's modularity, straight neck components were used in all Ti-Ti cases, and an anteverted or a retroverted neck was not used in any case. Stem revision was performed in one hip due to aseptic loosening. One hip underwent open reduction and internal fixation due to periprosthetic fracture without stem loosening. There were no cases of osteolysis and periprosthetic joint infection and clinically detectable junctional problems. The stem survival rate, with any stem revision as the endpoint, at 12 years was 96.6%. No significant difference was observed in the functional and radiological outcomes beween the Ti-Ti and nonmodular groups. CONCLUSIONS: The Ti-Ti modular neck femoral stem had comparable results with broadly used nonmodular femoral stems; hence, it can be a reliable option in primary total hip arthroplasty. However, in terms of the modularity itself of the modular neck femoral stem, whether the modular neck femoral stem is useful in uncomplicated primary total hip arthroplasty is unclear.

Asunto(s)

RESUMEN

BACKGROUND: Cementless femoral fixation in total hip arthroplasty (THA) has increased in prevalence worldwide. However, cementless fixation in elderly patients is controversial due to the risks of periprosthetic fracture and aseptic loosening. This study evaluated outcomes in patients undergoing primary THA utilizing a cementless stem without a collar, comparing those less than 75 years to those older than 75 years. METHODS: Between 2011 and 2021, there were 2,605 cementless THAs performed by 4 surgeons utilizing a highly porous metal fixation surface without a collar and consistent clinical protocols. There were 469 patients who had an age ≥ 75 years. Revision rates, intraoperative fractures, and 90-day mortality were compared between cohorts. In the ≥ 75 year age group, there were more women, more American Society of Anesthesiologists physical status classification III or IV, a lower body mass index, and more kidney disease, osteoporosis, and thyroid disease (P ≤ .002). RESULTS: All-cause revision rates trended lower for the ≥75 year age group compared to < 75 year (1.9 versus 3.5%, P = .082) at 20-months of follow-up. Moreover, there was no difference in all-cause femoral component revisions comparing ≥ 75 to < 75 year age groups (1.5 versus 2.2%, P = .375), with only 3 of 10 femoral revisions due to aseptic loosening being in the ≥ 75 year age group. Intraoperative fracture (0.2 versus 0.5%, P = .701) and 90-day mortality (0.2 versus 0.1%, P = .460) did not differ between ≥ 75 and < 75 year age groups. CONCLUSIONS: Older patients had comparable revision rates compared to younger patients using cementless femoral fixation without a collar. Furthermore, there was no difference in 90-day mortality or intraoperative fracture rates. Study findings provide evidence for the safety and durability of cementless THA using collarless femoral stems in elderly patients ≥ 75 years of age. LEVEL OF EVIDENCE: III.

Asunto(s)

Asunto(s)

RESUMEN

Background: There is a growing trend towards using femoral stems with a medial calcar collar during total hip arthroplasty (THA). Purpose: Systematically review the literature comparing a femoral collared stem and femoral collarless stem on subsidence, patient-reported outcomes (PROs), and revision rate. Study design: Systematic Review, Level of Evidence 1. Methods: A literature search of Pubmed and Medline was according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized controlled trials that evaluated collared and collarless stems, subsidence and PROs for adult patients undergoing total hip arthroplasty (THA) were included. Additional data collection included patient demographics, stem-calcar contact, canal-fill ratio (CFR), stem orientation, surgical approach, Dorr Type, complications, and revisions. Results: Five studies met inclusion criteria. 674 patients (704 hips) were included. Mean patient ages ranged 58.5-72.4 years old, and mean BMI ranged 26.6-29.8 kg/m2. Mean reported follow-up of the included clinical trials ranged 1-9.6 years. Two studies reported mean early subsidence at two weeks postoperatively, which was 0.36, 0.99 mm for collared stems and 0.52, 3.22 mm for collarless stems, proving to be statistically significant (P = 0.023), (P = 0.05). All studies demonstrated improved PROs at most recent follow-up. Revision rates ranged from 4 to 11.3 %, but these were not statistically significant. Conclusions: Implantation of collared stems compared to collarless may reduce early post-operative subsidence, while no substantial effect on aseptic loosening, thigh pain, proximal femoral fracture, and revision is seen. When measuring patient-reported outcomes, the collared femoral stem was not superior to the collarless femoral stem as both resulted in similar improvement preoperatively to postoperative state.

RESUMEN

Despite the significant advancements in the field of total hip arthroplasty (THA) and prosthesis designs, fracture of the modular femoral stem after THA can occur rarely and needs attention. Orthopaedic surgeons face a daunting task when it comes to the removal of a broken stem. The use of a trephine reamer has been evaluated for extracting the distal femoral stem, and this case report tries to address some key tips for the same. A 67-year-old obese male, without any major medical comorbidities, presented to the Royal Lancaster Infirmary orthopaedic outpatient department with a complaint of acute-on-chronic right anterior thigh pain that worsened over a few weeks. He had a history of bilateral staged uncemented THA done around 12 years ago. The plain radiological images confirmed the presence of a fracture of the Corail femoral stem. A posterior approach was used to dislocate the hip and the distal broken part of the stem was removed using trephines. Reamers were used and care was taken to prevent thermal necrosis by using intermittent saline lavage. After the removal of the fractured femoral stem, a cemented femoral revision THA was performed, which was uneventful. The patient walked without any aid or thigh pain postoperatively during his last follow-up. Using trephines to remove broken femoral stems is an effective and safe method. Intraoperative measures can help in avoiding heat necrosis while using a trephine reamer for extracting the fractured femoral stem. Regular follow-up and counselling are important after THA, to avoid a delayed diagnosis of non-traumatic femoral stem fractures.

RESUMEN

Three-dimensional (3D) preoperative planning tools can be used to help plan and compare component alignment scenarios for different total hip arthroplasty systems to ultimately improve postoperative outcomes and patient satisfaction. The objective of this study is to use 3D preoperative planning tools based on patient-specific bone models to compare two different stem designs, specifically a compaction broach stem and a proximal press fit stem. The planner uses patient-specific proximal femoral bone morphology to suggest a specific implant size and placement. The planner then allows for preoperative predictions of component head positioning, stem fit within the canal, and potential cortical bone reaming that must be done, as well as postoperative predictions of stability and mechanics. The stems were evaluated to determine the accuracy of stem placement, the theoretical volumetric bone removal/reaming required to achieve a desired fit, and the associated postoperative mechanics. This study demonstrated that there was a difference in component alignment and predicted postoperative mechanics between a compaction broach stem and a press fit stem, with the compaction broach stem allowing for more accurate alignment with less required bone removal, resulting in improved postoperative stability and mechanics. This study also demonstrated that much of the stem misalignment for both systems occurred in the anterior/posterior direction. Overall, 3D preoperative planning offers significant benefits and novel intraoperative insight, and the industry should continue to enhance their THA preoperative planning tools.

Asunto(s)

RESUMEN

INTRODUCTION: Radiolucent lines occasionally develop around the proximal aspect of fully hydroxyapatite (HA)-coated tapered femoral stems after total hip arthroplasty (THA). It was hypothesised that distal wedging of stems may predispose to proximal radiolucent line formation, which may negatively impact clinical outcome. METHODS: All primary THA performed with a collarless fully HA-coated stem that had a minimum of 1 year of radiographic follow-up were identified in a surgical database (n = 244). Radiographic measures of proximal femoral morphology and femoral canal fill at the middle and distal thirds of the stem were analysed for association with the presence of proximal radiolucent lines. Linear regression was used to explore any association between radiolucent lines and patient reported outcome measures (PROMs), available in 61% of patients. RESULTS: Proximal radiolucent lines developed in 31 cases (12.7%) at final follow-up. Dorr A femoral morphology and increased canal-fill at the distal ⅓ of the stem correlated with the development of radiolucent lines (p < 0.001). No correlation was observed between pain or PROMs and the presence of proximal radiolucent lines. DISCUSSION: We observed an unexpectedly high incidence of proximal femoral radiolucent lines about collarless fully HA coated stems. Distal-only implant wedging in Dorr A bone may compromise proximal fixation. Although this finding did not correlate with short-term outcomes, the long-term clinical impact requires further study.

Asunto(s)

RESUMEN

BACKGROUND: Most primary total hip arthroplasties (THAs) performed in the United States utilize cementless fixation with porous or hydroxyapatite (HA) coating. A previous meta-analysis comparing HA-coated versus non-HA-coated stems in primary THA published in 2013 found no significant difference between the 2. However, an updated analysis of the current literature is needed to assess the potential benefit of HA-coated stems in primary THA. METHODS: Various libraries were searched through May 2022 according to Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines. Studies included were randomized controlled trials comparing HA-coated femoral stems to non-HA-coated stems in primary THA. Outcomes included Harris Hip Score (HHS), endosteal bone formation, radiolucent lines, linear wear rate, revision for aseptic loosening, thigh pain, and heterotopic ossification. RESULTS: There were significantly fewer revisions for aseptic loosening (P = .004) and decreased postoperative thigh pain (P = .03) for patients who have with HA-coated stems. There was no significant difference in HHS (P = .20), endosteal bone formation (P = .96), radiolucent lines (P = .75), linear wear rate (P = .41), or heterotopic ossification (P = .71) between HA-coated and non-HA-coated stems. CONCLUSION: We found that HA-coated femoral stems in primary THA led to significantly fewer stem revisions for aseptic loosening and less postoperative thigh pain compared to non-HA-coated stems. These findings suggest HA-coated femoral stems should be preferred over non-HA-coated femoral stems in primary THA.

Asunto(s)

RESUMEN

PURPOSE: A total of 894 hips were evaluated to describe the survivorship of Exeter cemented femoral stems and report the outcomes and complications of our 'Exeter- era', and there is no study from Central or Eastern Europe demonstrating similar results. METHODS: Between January 2000 and December 2009, a total of 894 hips were included who underwent Exeter universal and V40 femoral stems with a mean follow up of 13 years. Cemented Exeter low profile polyethylene cups were used in 889 patients (99.4%) cups. Harris hip score (HHS) was used and statistical outcome measures were calculated with revision as an endpoint for aseptic loosening of the stem, aseptic loosening of any component, all-cause revision of the stem, and all-cause revision of the hip. RESULTS: A total of 103 patients died and 129 (14.4%) operated hips were lost to follow-up before ten years. Out of the 662, ten stems (1.5%) were revised for aseptic loosening. Aseptic loosening of any component was the reason for revision in 43 cases (6.5%), consisting of 40 cup revisions and ten stem exchanges. Periprosthetic fracture occurred in 17 cases (1.9%) Periprosthetic joint infection occurred in 18 cases (2.01%). Three cups were exchanged for recurrent dislocation, and two stems had broken. CONCLUSION: Exeter hip system has provided reproducible results across different centres worldwide, as it did in our series. Thorough surgical and cementing technique is of utmost importance for achieving these results. The cup is the weak point of the system and use of a hybrid system is worth considering.

Asunto(s)

RESUMEN

BACKGROUND: Tapered, fluted titanium (TFT) femoral stems have become the gold standard in revision total hip arthroplasty (rTHA). However, there is a paucity of data on TFT stem subsidence rates following aseptic rTHA. Subsidence can lead to instability, mechanical failure, leg-length discrepancy, and may require revision surgery. This study evaluated the incidences and predictors of TFT subsidence in aseptic rTHA. METHODS: A total of 102 TFT femoral stems of 4 designs were retrospectively reviewed. Stem subsidence was measured on digital radiographs taken immediately after surgery and at standard clinical follow-up. Patient characteristics, risk factors for subsidence, revision etiologies, and implant characteristics were recorded. Patient-reported outcome measures were also evaluated for a subset of cases. RESULTS: Overall, 12% of stems subsided >1 cm, and subsidence was minimal (<3 mm) in ≥64% of cases. From immediate postoperative to 1-month radiographic follow-up, 79% of stems subsided a mean of 2.9 mm (range, 0.1 to 12 mm). Beyond 1 month, subsidence was minimal for ≥77% of cases. In multivariate analyses, women and less femoral implant canal fill were associated with greater subsidence (P ≤ .034). The TFT stem design was not associated with early subsidence (P = .816). There were no modular junction fractures. There were 2 fractures and 2 subsidence-related revisions for aseptic loosening that occurred postoperatively. CONCLUSIONS: The amount of subsidence in TFT stems was low and was detectable in the early (less than 1 year) postoperative period. Maximizing TFT stem fill within the femoral canal appears to reduce the risk of subsidence without increasing femoral fracture rates and should be the goal with implantation of these devices. LEVEL OF EVIDENCE: IV-Case Series, No Control Group.

RESUMEN

Background: The use of cementless femoral stems in patients undergoing primary total hip arthroplasty (THA) with Dorr C bone remains controversial for fear of fracture or subsidence. Purpose of this multicenter study was to compare clinical outcomes and complications of THA using a tapered femoral prosthesis in patients with Dorr C bone versus Dorr A/B bone. Methods: A total of 1,030 patients underwent primary THA with a tapered wedge femoral stem at a minimum one year follow up. Forty-eight patients with Dorr C bone (mean age 68.7 years) were compared with a matched cohort of patients with Dorr A/B bone (mean age 69.9 years). Mean follow-up was approximately 4 years in both cohorts. There were no differences in sex, age, body mass index (BMI), Harris Hip Score (HHS), complications, and radiographic outcomes including subsidence and aseptic loosening were evaluated. Results: Postoperative HHSs were a mean of 82 points in the Dorr C cohort compared to 84 points in the Door A/B cohort (P=0.2653). There was no significant difference in complication or revision rates for any reason (P=0.23). Mean subsidence for the Dorr C and Dorr A/B was 1.4 and 1.2 mm, respectively (P=0.5164), and there was no aseptic loosening of the femoral component found in either group. Conclusions: Current generation tapered wedge cementless femoral stems provide stable fixation for patients with Dorr C bone quality without increased complications with respect to fracture or subsidence and can be considered an alternative to cemented stems in patients with compromised bone quality.