Asunto(s)

RESUMEN

INTRODUCTION: Robotic surgery has transformed minimally invasive procedures, offering precision and efficiency. However, the ergonomic aspects of robotic consoles and their impact on surgeon health remain understudied. This review investigates the burden of ergonomics and muscle fatigue among robotic surgeons in China, comparing the findings to a multinational study. METHODOLOGY: A literature review identified themes related to physical discomfort in robotic surgery. A questionnaire was administered to Chinese robotic surgeons, yielding 40 responses. The study assessed demographic characteristics, surgeon experience, ergonomic practices, reported discomfort, and pain-relief mechanisms. RESULTS: The study revealed that most surgeons experienced shoulder and neck pain, with mixed opinions on whether robotic surgery was the primary cause. Stretching exercises were commonly used for pain relief. Surgeons believed that case volume and surgery duration contributed to discomfort. Comparisons with a multinational study suggested potential demographic and experience-related differences. CONCLUSION: While the study has limitations, including a small sample size and potential translation issues, it underscores the importance of addressing ergonomic concerns and providing proper training to robotic surgeons to ensure their well-being and longevity in the field. Further research with larger cohorts and platform-specific analyses is warranted.

Asunto(s)

RESUMEN

PURPOSE: To review the literature and identify the most economical techniques for laparoscopic appendicectomy (LA) that do not compromise on patient care. METHODS: We performed a search of the Cochrane Library, PubMed, EMBASE and Google Scholar for papers published between January 2001 and January 2021. The outcomes of the included studies were then grouped by theme of cost analysis, with the main areas of focus being the use of disposable equipment, appendiceal stump closure, and retrieval of the appendix. RESULTS: After screening a total of 254 search results, 40 studies were included, representing 13 285 patient outcomes, having two main areas of focus: the use of reusable or disposable equipment and the different methods of appendiceal stump closure. Use of disposable instruments has been cost effective in LA in 2 studies. However, use of reusable trocars has reduced cost of procedure by €250 in another study. Appendiceal stump closure using ligature, endoloops or Endoclips had been cost-effective compared to Endostaplers in 25 studies. This can save up to €350. Endoscopic specimen bags are single use and represent further disposable equipment costs. The use of a sterile glove to replace this piece of kit can further provide cost benefit as shown in 2 studies. CONCLUSION: Laparoscopic appendicectomy can be performed in a variety of ways with equivocal patient safety. We present the use of extracorporeal ligature of the appendiceal base, combined with the use of a surgical glove retrieval system as the most economic technique in laparoscopic appendicectomy.

Asunto(s)

RESUMEN

BACKGROUND: Fluorescence angiography in colorectal surgery is a technique that may lead to lower anastomotic leak rates. However, the interpretation of the fluorescent signal is not standardised and there is a paucity of data regarding interobserver agreement. The aim of this study is to assess interobserver variability in selection of the transection point during fluorescence angiography before anastomosis. METHODS: An online survey with still images of fluorescence angiography was distributed through colorectal surgery channels containing images from 13 patients where several areas for transection were displayed to be chosen by raters. Agreement was assessed overall and between pre-planned rater cohorts (experts vs non-experts; trainees vs consultants; colorectal specialists vs non colorectal specialists), using Fleiss' kappa statistic. RESULTS: 101 raters had complete image ratings. No significant difference was found between raters when choosing a point of optimal bowel transection based on fluorescence angiography still images. There was no difference between pre-planned cohorts analysed (experts vs non-experts; trainees vs consultants; colorectal specialists vs non colorectal specialists). Agreement between these cohorts was poor (<.26). CONCLUSION: Whilst there is no learning curve for the technical adoption of FA, understanding the fluorescent signal characteristics is key to successful use. We found significant variation exists in interpretation of static fluorescence angiography data. Further efforts should be employed to standardise fluorescence angiography assessment.

Asunto(s)

RESUMEN

INTRODUCTION: Our prototype wireless full-HD Augmented Reality Head-Mounted Display (AR-HMD) aims to eliminate surgeon head turning and reduce theater clutter. Learning and performance versus TV Monitors (TVM) is evaluated in simulated knee arthroscopy. METHODS: 19 surgeons and 19 novices were randomized into either the control group (A) or intervention group (B) and tasked to perform 5 simulated loose-body retrieval procedures on a bench-top knee arthroscopy simulator. A cross-over study design was adopted whereby subjects alternated between devices during trials 1-3, deemed the "Unfamiliar" phase, and then used the same device consecutively in trials 4-5, to assess performance in a more "Familiarized" state. Measured outcomes were time-to-completion and incidence of bead drops. RESULTS: In the unfamiliar phase, HMD had 67% longer mean time-to-completion than TVM (194.7 ± 152.6s vs 116.7 ± 78.7s, P < .001). Once familiarized, HMD remained inferior to TVM, with 48% longer completion times (133.8 ± 123.3s vs 90.6 ± 55s, P = .052). Cox regression revealed device type (OR = 0.526, CI 0.391-0.709, P < .001) and number of procedure repetitions (OR = 1.186, CI 1.072-1.311, P = .001) are significantly and independently related to faster time-to-completion. However, experience is not a significant factor (OR = 1.301, CI 0.971-1.741, P = .078). Bead drops were similar between the groups in both unfamiliar (HMD: 27 vs TVM: 22, P = .65) and familiarized phases (HMD: 11 vs TVM: 17, P = .97). CONCLUSION: Arthroscopic procedures continue to be better performed under conventional TVM. However, similar quality levels can be reached by HMD when given more time. Given the theoretical advantages, further research into improving HMD designs is advocated.

Asunto(s)

RESUMEN

Background. Immersive virtual reality (iVR) facilitates surgical decision-making by enabling surgeons to interact with complex anatomic structures in realistic 3-dimensional environments. With emerging interest in its applications, its effects on patients and providers should be clarified. This systematic review examines the current literature on iVR for patient-specific preoperative planning. Materials and Methods. A literature search was performed on five databases for publications from January 1, 2000 through March 21, 2021. Primary studies on the use of iVR simulators by surgeons at any level of training for patient-specific preoperative planning were eligible. Two reviewers independently screened titles, abstracts, and full texts, extracted data, and assessed quality using the Quality Assessment Tool for Studies with Diverse Designs (QATSDD). Results were qualitatively synthesized, and descriptive statistics were calculated. Results. The systematic search yielded 2,555 studies in total, with 24 full-texts subsequently included for qualitative synthesis, representing 264 medical personnel and 460 patients. Neurosurgery was the most frequently represented discipline (10/24; 42%). Preoperative iVR did not significantly improve patient-specific outcomes of operative time, blood loss, complications, and length of stay, but may decrease fluoroscopy time. In contrast, iVR improved surgeon-specific outcomes of surgical strategy, anatomy visualization, and confidence. Validity, reliability, and feasibility of patient-specific iVR models were assessed. The mean QATSDD score of included studies was 32.9%. Conclusions. Immersive VR improves surgeon experiences of preoperative planning, with minimal evidence for impact on short-term patient outcomes. Future work should focus on high-quality studies investigating long-term patient outcomes, and utility of preoperative iVR for trainees.

Asunto(s)

RESUMEN

BACKGROUND: Intravenous fluid treatment is the most common way to take care of inpatients. Because of the global pandemic, the number of inpatients is increasing rapidly, leading to constant demand in the contactless system. PURPOSE: In this article, we suggest a web-based intravenous fluid treatment monitoring platform in the nursing station to unburden the medical staff's workload.

Asunto(s)

RESUMEN

Purpose. See-through head-mounted displays (HMDs) can be used to view fluoroscopic imaging during orthopedic surgical procedures. The goals of this study were to determine whether HMDs reduce procedure time, number of fluoroscopic images required, or number of head turns by the surgeon compared with standard monitors. Methods. Sixteen orthopedic surgery residents each performed fluoroscopy-guided drilling of 8 holes for placement of tibial nail distal interlocking screws in an anatomical model, with 4 holes drilled while using HMD and 4 holes drilled while using a standard monitor. Procedure time, number of fluoroscopic images needed, and number of head turns by the resident during the procedure were compared between the 2 modalities. Statistical significance was set at P < .05. Results. Mean (SD) procedure time did not differ significantly between attempts using the standard monitor (55 [37] seconds) vs the HMD (56 [31] seconds) (P = .73). Neither did mean number of fluoroscopic images differ significantly between attempts using the standard monitor vs the HMD (9 [5] images for each) (P = .84). Residents turned their heads significantly more times when using the standard monitor (9 [5] times) vs the HMD (1 [2] times) (P < .001). Conclusions. Head-mounted displays lessened the need for residents to turn their heads away from the surgical field while drilling holes for tibial nail distal interlocking screws in an anatomical model; however, there was no difference in terms of procedure time or number of fluoroscopic images needed using the HMD compared with the standard monitor.

Asunto(s)

RESUMEN

Background. The recent outbreak of COVID-19 has led to an increase in isolated medical waste, making the disposal of isolated medical waste a significant problem. There is the dedicated waste bin with four-sided locking-type at the top, causing contact during waste disposal. And it has infection possibility with high humidity. Purpose. In this article, we suggest automatic isolated medical waste bin cover for drying waste.

Asunto(s)

RESUMEN

Since the SARS-CoV-2 (COVID-19) outbreak, health-care workers (HCWs) have had to create personal protective equipment (PPE) due to the worldwide demand and thus ensuing shortage. To address the dearth of available PPE, HCWs have quickly explored options to repurpose in-hospital equipment to provide alternative PPE to caregivers. We report the modification of a Stryker T5TM and Stryker Flyte® personal protection surgical helmets as a powered air-purifying respirator.

Asunto(s)

RESUMEN

Introduction. The Stanford Biodesign process is a needs-driven approach to innovation which begins in the clinical setting and environment and is championed by practicing clinicians and surgeons. Here, our team applied the Stanford Biodesign process through clinical immersion to identify potential unmet clinical needs in the field of head and neck surgery, brainstormed and prototyped solutions to solve the top unmet need, and developed a commercialized medical device. Methods. The team underwent the 3 phases of the Biodesign process: identify, invent, and implement. The team underwent clinical immersion and followed head and neck surgeons from the Department of Head and Neck Surgery for a duration of 1 month. The needs identified were then filtered through a structured process using predefined filters, and a top need was chosen. After multiple rounds of brainstorming and prototyping, a final concept was developed. Results. The team collected 111 unmet needs and designed the in vivo surgical lighting concept that eventually led to the development of the KLARO™ in vivo surgical lighting device with a commercial partner. KLARO™ is a fully flexible 4.6-mm diameter light-emitting diode light strip that is freely bendable to be safely placed into deep cavities during open surgeries. Conclusion. The Biodesign process provides a standardized way to turn these needs into solution to advance the field of head and neck surgery and improve the outcome of patients.

RESUMEN

There have been many studies to evaluate the effect of training schedules on retention; however, these usually compare only 2 drastically different schedules, massed and distributed, and they have tended to look at declarative knowledge tasks. This study examined learning on a laparoscopic surgery simulator using a set of procedural or perceptual-motor tasks with some declarative elements. The study used distributed, massed, and 2 hybrid-training schedules that are neither distributed nor massed. To evaluate the training schedules, 23 participants with no previous laparoscopic experience were recruited and randomly assigned to 1 of the 4 training schedules. They performed 3 laparoscopic training tasks in eight 30-minute learning sessions. We compared how task time decreased with each schedule in a between-participants design. We found participants in all groups demonstrated a decrease in task completion time as the number of training sessions increased; however, there were no statistically significant differences in participants' improvement on task completion time between the 4 different training schedule groups, which suggested that time on task is more important for learning these tasks than the training schedule.

Asunto(s)

RESUMEN

Introduction. Many processes exist that limit or eliminate the incidence of adverse events in general surgery including the World Health Organization safety checklist. Technology and device advancement has a potentially expanding role in the context of surgical safety. Materials and Methods. A dual controlled accessory electrical diathermy footswitch (Permissive diathermy foot switch device or PDf) device concept was developed in an effort to improve patient safety in theatre and enhance opportunities in training. Electrical diathermy is only activated if the senior supervising surgeon and the novice surgeon simultaneously activate their interconnected footswitches. The activation of the PDf accessory footswitch device allows a senior surgeon to exert control on "initiation" of activation of diathermy devices operated by a novice surgeon (foot on pedal) as well as when desiring to deactivate the device (foot off pedal). Results. A process of designing and prototyping was initiated to define the purpose and the functionality of the PDf device up till the stage of a fully functioning prototype. The PDf device was constructed as a final working and tested prototype in association with the local medical engineering department at the Cumberland Infirmary in Carlisle. The device was on a nonbiological model to determine efficacy and safety and passed its laboratory testing phase and was deemed ready for clinical use. Conclusion. We demonstrated the feasibility and functionality of the PDf device and propose a positive role in surgical training in the context of early surgical training and specific circumstances where more control is needed.

Asunto(s)

RESUMEN

Left ventricular assist devices (LVADs) are an important therapeutic option for patients with end-stage heart failure waiting for heart transplantation or in older patients as definite therapy for heart failure. Interestingly, about 62% of patients receiving LVADs do not have an automatic implantable cardioverter-defibrillator (AICD) at the time of implantation, although these patients have increased risk of being confronted with dangerous arrhythmia. Therefore, an LVAD system including AICD function is a reasonable alternative for such heart failure patients thereby avoiding a second surgical intervention for AICD implantation. In this article, a newly developed system including LVAD and AICD function is introduced, and we also report its first in vitro testing.

Asunto(s)

RESUMEN

Background. Compared with open surgery, minimally invasive surgery is limited by reduced sensation of tissue properties. A laparoscopic grasper with integrated haptic feedback technology that improves the ability to sense tissue properties might provide a solution. The force reflecting operation instrument (FROI) is a new laparoscopic grasper, designed to provide information about the interaction forces between the instrument and tissue through resistance in the handle. This pilot study aimed to assess the functionality of the FROI compared with a conventional grasper in an in vivo setting. Methods. In this randomized trial, we used a standard laparoscopic surgical setup to perform laparoscopic surgery in pigs. In all, 11 surgeons performed colorectal, gynecological, or urological procedures, once with the FROI and once with a conventional grasper. Participants were asked to complete the NASA Task Load Index Rating Scale and rate 5 specific features for both graspers. To capture opinions on the overall functionality of the FROI, participants were asked to answer 8 open questions. Results. The surgeons reported that the use of the FROI significantly improved tissue consistency perception, arterial pulse detection, and force control compared with the conventional grasper. No significant differences were found in surgeons' muscular strain or operative time. The most emphasized topics in the open questions were improved soft-tissue handling and importance for complex procedures. Conclusion. Through this first in vivo analysis of the functionality of the FROI, a multispecialty group of laparoscopic surgeons confirmed the added value of haptic feedback technology in a live surgical setting.

Asunto(s)

RESUMEN

BACKGROUND: The widespread use and development of smartphones and mHealth apps has the potential to overcome communication deficiencies in health care. OBJECTIVE: To carry out a literature review of studies that evaluate patients' experience on the use of perioperative mHealth apps. METHODS: An up-to-date systematic review on studies assessing patients' use of mHealth apps for communicating with the health care team in the perioperative period was performed following the PRISMA statement. RESULTS: Ten studies (in 11 articles) were identified: 8 feasibility studies and 2 randomized controlled trials. Nine studies included apps used for postoperative monitoring while 1 study also provided preoperative guidance. DISCUSSION: An analysis of barriers and motivations of patients and health care professionals to the use of perioperative mHealth apps was performed. Barriers included patients' lack of confidence when using apps and potential lack of time from health care professionals to monitor information submitted by patients. Motivations included patients' sense of being looked after and potential cost-effectiveness and increased efficiency of health care services. This analysis led to the concept of the "ideal app" that would need to be developed following adequate protocols and security standards. Features of the ideal app include preoperative advice on medications and investigations, information on surgery, and a remote follow-up tool to improve safety and to minimize unnecessary clinic appointments and associated costs. CONCLUSION: There is an overall positive impression of the use of perioperative mHealth apps. However, further studies are required to assess the impact that they have on patients' care and healthcare professional services.

Asunto(s)

RESUMEN

BACKGROUND: Virtual reality (VR)-based simulations offer rich opportunities for surgical skill training and assessment of surgical novices and experts. A structured evaluation and validation process of such training and assessment tools is necessary for effective surgical learning environments. OBJECTIVE: To develop and apply a classification system of surgeon-reported experience during operation of a VR vertebroplasty simulator. METHODS: A group of orthopedic, trauma surgeons and neurosurgeons (n = 13) with various levels of expertise performed on a VR vertebroplasty simulator. We established a mixed-methods design using think-aloud protocols, senior surgical expert evaluations, performance metrics, and a post-simulation questionnaire. Verbal content was systematically analyzed using structured qualitative content analysis. We established a category system for classification of surgeons' verbal evaluations during the simulation. Furthermore, we evaluated intraoperative performance metrics and explored potential associations with surgeons' characteristics and simulator evaluation. RESULTS: Overall, 244 comments on realism and usability of the vertebroplasty simulator were collected. This included positive and negative remarks, questions, and specific suggestions for improvement. Further findings included surgeons' approval of the realism and usability of the simulator and the observation that the haptic feedback of the VR patient's anatomy requires further improvement. Surgeon-reported evaluations were not associated with performance decrements. DISCUSSION: This study is the first to apply think-aloud protocols for evaluation of a surgical VR-based simulator. A novel classification approach is introduced that can be used to classify surgeons' verbalized experiences during simulator use. Our lessons learned may be valuable for future research with similar methodological approach.

Asunto(s)

RESUMEN

BACKGROUND: Cervical cancer remains a leading cause of cancer-related deaths worldwide despite being a highly preventable disease. Nine out of every 10 deaths due to cervical cancer occur in developing regions with limited access to medical care and unique resource constraints. To address cervical cancer prevention within the confines of these unique limitations, our team of students and faculty advisors at the University of Utah's Center for Medical Innovation developed a low-cost, portable technology that utilizes thermal coagulation, a form of heat ablation, to treat cervical intraepithelial neoplasia. METHODS: A multidisciplinary team of students worked with clinical and industry advisors to develop a globally applicable treatment for cervical intraepithelial neoplasia through a systematic process of problem validation, stakeholder analysis, user-centered design, business plan development, and regulatory clearance. RESULTS: Our efforts resulted in the development of a functional, self-contained, battery-operated prototype within 72 days, followed by Food and Drug Administration clearance of a finalized device within 18 months. CONCLUSION: Interdisciplinary university programs that leverage the capabilities of academic-industry partnerships can accelerate the development and commercialization of affordable medical technologies to solve critical global health issues.

Asunto(s)

RESUMEN

BACKGROUND: To regain 2-eyed vision in laparoscopy, dual-channeled optics have been introduced. With this optics design, the distance between the 2 front lenses defines how much stereoscopic effect is seen. This study quantifies the impact of an enhanced and a reduced stereo effect on surgical task efficiency. METHODS: A prospective single-blinded study was performed with 20 laparoscopic novices in an inanimate experimental setting. A standard bichannelled stereo system was used to perform a suturing and knotting task. The working distance and the task size were scaled to vary the stereo effect and, thereby, simulate hypothetic stereo optics with enhanced and reduced optical bases. The task performances were timed, and the number of trials for stitching out was counted. The participants finally filled out a questionnaire to collect subjective impressions. RESULTS: The increase of the stereo effect by 50% caused no objective improvement in laparoscopic knotting compared with typical 3D (control group with stereo basis of 4.5 mm). But ergonomic disadvantages (headache) were subjectively reported in 1 of 20 cases in the questionnaire. The reduction of the stereo effect by one-third led to a significantly longer average execution time. There was no significant dependence found between stereo effect and number of stich-out trials, stitching precision, or knotting quality. CONCLUSIONS: Considering laparoscopy, it does not seem advisable to enhance the stereo effect because of ergonomic problems. Otherwise, a miniaturization of the 3D scope (5 mm version) is problematic because its benefit mostly shrinks with the reduced stereo effect.

Asunto(s)

RESUMEN

INTRODUCTION: This research investigated differences in the effects of a state-of-art stereoscopic 3-dimensional (3D) display and a traditional 2-dimensional (2D) display in simulated laparoscopic surgery over a longer duration than in previous publications and studied the learning effects of the 2 display systems on novices. METHODS: A randomized experiment with 2 factors, image dimensions and image sequence, was conducted to investigate differences in the mean movement time, the mean error frequency, NASA-TLX cognitive workload, and visual fatigue in pegboard and circle-tracing tasks. RESULTS: The stereoscopic 3D display had advantages in mean movement time ( P < .001 and P = .002) and mean error frequency ( P = .010 and P = .008) in both the tasks. There were no significant differences in the objective visual fatigue ( P = .729 and P = .422) and in the NASA-TLX ( P = .605 and P = .937) cognitive workload between the 3D and the 2D displays on both the tasks. For the learning effect, participants who used the stereoscopic 3D display first had shorter mean movement time in the 2D display environment on both the pegboard ( P = .011) and the circle-tracing ( P = .017) tasks. CONCLUSIONS: The results of this research suggest that a stereoscopic system would not result in higher objective visual fatigue and cognitive workload than a 2D system, and it might reduce the performance time and increase the precision of surgical operations. In addition, learning efficiency of the stereoscopic system on the novices in this study demonstrated its value for training and education in laparoscopic surgery.

Asunto(s)