RESUMEN

Epoxy resins, as important thermosetting polymers, exhibit excellent adhesion to various substrates. In view of this, reticulate coating of triglycidyl isocyanate with triethylenetetramine was introduced onto the surface of poly(styrene-divinylbenzene) utilizing amine curing reaction to obtain poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine composite microspheres. The amino groups and epoxy groups of triglycidyl isocyanate-triethylenetetramine endowed poly(styrene-divinylbenzene) with good reactivity, which could be quaternized under mild conditions to obtain an anion exchange chromatographic stationary phase. The quaternized poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine was characterized by scanning electron microscope, Fourier-transform infrared spectroscopy, N2 adsorption-desorption experiment, et al. The chromatographic performance of the customized column was evaluated by separating seven conventional anions, organic weak acids, and carbohydrates. Poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine possesses the uniform size of poly(styrene-divinylbenzene) microspheres and good reactivity of triglycidyl isocyanate-triethylenetetramine, which offers a flexible strategy for the preparation of anion exchange stationary phase. The column exhibits excellent chemical and mechanical stability and chromatographic performance. Finally, the column was successfully applied for the determination of nitrite in pickles.

RESUMEN

The performance provided by graphene (Gr) and graphene oxide (GO) additives can be improved by achieving strong adhesion and uniform dispersion in the epoxy resin matrix. In this study, molecular modeling and simulation of DGEBA/DETA based epoxy nanocomposites containing Gr and GO additives were performed. Density functional theory and molecular dynamics simulations were used to investigate interfacial interaction energies and Young's Modulus. Improvement in the interaction energies was studied by controlling the epoxy:hardener ratio, type and the number of oxygen-containing functional groups on the GO, the mass percentage of Gr/GO filler in the epoxy matrix, size and dispersion of GO in the cell. It was demonstrated that functional groups with up to 10% oxygen content in GO significantly increase interfacial interaction energy for large size Gr/GO. Increasing DETA type amine ratio in the preparation of epoxy polymers increases the interaction energy for high oxygen content while decreasing the interaction energy for low oxygen content in GO for small size GO with edge functional groups. The performance of material dramatically decreased even at high DETA hardener and high GO mass percentages when the aggregation factor of Gr/GO was included in simulations that explain lower Gr/GO percentages in the experimental studies.

RESUMEN

Fiber-reinforced polymer composites are preferred over conventional materials because of their superior strength and modulus. Previously limited due to high manufacturing costs, synthetic fibers have been replaced by some natural fibers, such as waste wheat straw fibers. Here, epoxy-based polymer composites' mechanical and physical properties have been investigated, focusing on fiber weight ratios for both treated and untreated fiber. The research found that treated fibers display more effective mechanical qualities than untreated fibers, with a higher tensile strength of 54.4 MPa. The untreated Wheat Straw-Glass fiber reinforced composite has a less tensile strength of 26.3 MPa (10 wt% fiber). Pure resin-based composite has the most minor tensile strength at 1.52 MPa. The highest flexural strength obtained for hybrid composite is 88.76 MPa for treated fiber with epoxy resin and 49.6 MPa for untreated 30 wt % fiber. At the same time, the sole epoxy resin composite has the lowest value of 10.60 MPa. Untreated fiber (30 wt%) has the highest impact energy of 8J. Untreated wheat straw fiber absorbs more water due to its hydrophilic nature. In contrast, treated fiber exhibits better bonding and minimal water content, and the sole epoxy resin composite exhibits hydrophobic properties, resulting in less water absorption. The treated fiber displays better bonding than the untreated fiber throughout the SEM analysis. Wheat Straw fiber is mainly used for biodegradable plastic formation, housing construction, building materials, etc.

RESUMEN

There are great challenges in the field of natural product isolation and purification and in the pharmacological study of oligosaccharide monomers. And these isolation and purification processes are still universal problems in the study of natural products (NPs), traditional Chinese medicine (TCM), omics, etc. The same polymer-modified materials designed for the special separation of oligosaccharides, named Sil-epoxy-PEI and Sil-chloropropyl-PEI, were synthesized via two different methods and characterized by scanning electron microscopy combined with energy spectrum analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential as well as surface area analysis, etc. Several nucleotide/nucleoside molecules with different polarities and selectivities were successfully isolated in our laboratory using stainless-steel columns filled with the synthesized material. In addition, the separation of saccharide probes and oligosaccharides mixtures in water extracts of Morinda officinalis were compared in HILIC mode. The results showed that the resolution of separations for the representative analytes of the Sil-epoxy-PEI column was higher than for the Sil-chloropropyl-PEI column, and the developed stationary phase exhibited improved performance compared to hydrothermal carbon, amide columns and other HILIC materials previously reported.

Asunto(s)

RESUMEN

Thermoset-based polymer composites containing functional fillers are promising materials for a variety of applications, such as in the aerospace and medical fields. However, the resin viscosity is often unsuitably high and thus impedes a successful filler dispersion in the matrix. This challenge can be overcome by incorporating suitable low-viscosity modifiers into the prepolymer. While modifiers can aptly influence the prepolymer rheology, they can also affect the prepolymer curing behavior and the mechanical and thermal properties of the resulting matrix material. Therefore, this study investigates the effects that a commercial-grade low-viscosity additive (butyl glycidyl ether) has on a common epoxy polymer system (diglycidyl ether of bisphenol-A epoxy with a methylene dianiline curative). The weight percentage of the modifier inside the epoxy was varied from 0 to 20%. The rheological properties and cure kinetics of the resulting materials were investigated. The prepolymer viscosity decreased by 97% with 20 wt% modifier content at room temperature. Upon curing, 20 wt% modifier addition reduced the exothermic peak temperature by 12% and prolonged the time to reach the peak by 60%. For cured material samples, physical and thermo-mechanical properties were characterized. A moderate reduction in glass transition temperature and an increase in elastic modulus was observed with 20 wt% modifier content (in the order of 10%). Based on these findings, the selected material system is seen as an expedient base for material design due to the ease of processing and material availability. The present study thus provides guidance to researchers developing polymer composites requiring reduced prepolymer viscosity for successful functional filler addition.

RESUMEN

This study focuses on enhancing the thermal properties and shape recovery performance of shape memory polymers (SMPs) through the application of carbon-based fillers. Single and mixed fillers were used to investigate their effects on the glass transition temperature (Tg), thermal conductivity, and shape recovery performance. The interaction among the three-dimensional (3D) structures of mixed fillers played a crucial role in enhancing the properties of the SMP. These interactions facilitated efficient heat transfer pathways and conserved strain energy. The application of mixed fillers resulted in substantial improvements, demonstrating a remarkable 290.37% increase in thermal conductivity for SMPCs containing 60 µm carbon fiber (CF) 10 wt% + graphite 20 wt% and a 60.99% reduction in shape recovery time for SMPCs containing CF 2.5 wt% + graphite 2.5 wt%. At a content of 15 wt%, a higher graphite content compared to CF improved the thermal conductivity by 37.42% and reduced the shape recovery time by 6.98%. The findings demonstrate that the application of mixed fillers, especially those with high graphite content, is effective in improving the thermal properties and shape recovery performance of SMPs. By using mixed fillers with high graphite content, the performance of the SMP showed significant improvement in situations where fast response times were required.

RESUMEN

The massive consumption of fossil fuels has led to the serious accumulation of carbon dioxide gas in the atmosphere and global warming. Bioconversion technologies that utilize biomass resources to produce chemical products are becoming widely accepted and highly recognized. The world is heavily dependent on petroleum-based products, which may raise serious concerns about future environmental security. Most commercially available epoxy resins (EPs) are synthesized by the condensation of bisphenol A (BPA), which not only affects the human endocrine system and metabolism, but is also costly to produce and environmentally polluting. In some cases, straw tar-based epoxy resins have been recognized as potential alternatives to bisphenol A-based epoxy resins, and are receiving increasing attention due to their important role in overcoming the above problems. Using straw tar and lignin as the main raw materials, phenol derivatives were extracted from the middle tar instead of bisphenol A. Bio-based epoxy resins were prepared by replacing epichlorohydrin with epoxylated lignin to press carbon fiber sheets, which is a kind of bio-based fine chemical product. This paper reviews the research progress of bio-based materials such as lignin modification, straw pyrolysis, lignin epoxidation, phenol derivative extraction, and synthesis of epoxy resin. It improves the performance of carbon fiber-reinforced plastic (CFRP) while taking into account the ecological and environmental protection, so that the epoxy resin is developed in the direction of non-toxic, harmless and high-performance characteristics, and it also provides a new idea for the development of bio-based carbon fibers.

RESUMEN

A precise prediction of the cure-induced shrinkage of an epoxy resin is performed using a finite element simulation procedure for the material behaviour. A series of experiments investigating the cure shrinkage of the resin system has shown a variation in the measured cure-induced strains. The observed variation results from the thermal history during the pre-cure. A proposed complex thermal expansion model and a conventional chemical shrinkage model are utilised to predict the cure shrinkage observed with finite element simulations. The thermal expansion model is fitted to measured data and considers material effects such as the glass transition temperature and the evolution of the expansion with the degree of cure. The simulations accurately capture the exothermal heat release from the resin and the cure-induced strains across various temperature profiles. The simulations follow the experimentally observed behaviour. The simulation predictions achieve good accuracy with 2-6% discrepancy compared with the experimentally measured shrinkage over a wide range of cure profiles. Demonstrating that the proposed complex thermal expansion model affects the potential to minimise the shrinkage of the studied epoxy resin. A recommendation of material parameters necessary to accurately determine cure shrinkage is listed. These parameters are required to predict cure shrinkage, allow for possible minimisation, and optimise cure profiles for the investigated resin system. Furthermore, in a study where the resin movement is restrained and therefore able to build up residual stresses, these parameters can describe the cure contribution of the residual stresses in a component.

RESUMEN

Stepwise photopolymerization is a miraculous strategy modulating the polymer skeleton and electro-optical properties of light modulators based on liquid crystal/polymer composites. However, owing to the indistinct polymerization mechanism and curing condition discrepancy, the required polymer structures and electro-optical properties are hard to be controlled precisely. Herein, a novel polymer-stabilized liquid crystal film based on acrylate/epoxy resin is proposed, fabricated and the relationships between preparation process, polymer content, polymer morphology and electro-optical properties are studied. The in-situ photopolymerization of acrylate/epoxy resin liquid crystalline polymer is fulfilled using cation photo-initiator UV 6976. The distinct photopolymerization speed between acrylate and epoxy resin benefits the polymer morphology control, and with accurate containment of the polymerization process and polymer composition, the superior electro-optical properties at a higher polymer content are acquired. The polymer morphology and electro-optical properties are influenced by the polymer content and mass ratio between acrylate and epoxy resin. The best electro-optical properties among samples are attained by controlling the mass ratio between acrylate and epoxy resin to 1:1, integrating higher densities of scattering centers and lower anchoring effect. With higher polymer content, the strategy of increasing the mass ratio of E6M benefits the improvement of E-O properties for alleviating polymer density. This work provides insights to stepwise polymerization of liquid crystalline monomers and offers a fancy strategy for the preparation of novel liquid crystal dimming films.

RESUMEN

The cure kinetics of various epoxy resin mixtures, comprising a bisphenol epoxy, two epoxy modifiers, and two hardening agents derived from cardanol technology, were investigated through differential scanning calorimetry (DSC). The development of these mixtures aimed to achieve epoxy materials with a substantial bio-content up to 50% for potential automotive applications, aligning with the 2019 European Regulation on climate neutrality and CO2 emission. The Friedman isoconversional method was employed to determine key kinetic parameters, such as activation energy and pre-exponential factor, providing insights into the cross-linking process and the Kamal-Sourour model was used to describe and predict the kinetics of the chemical reactions. This empirical approach was implemented to forecast the curing process for the specific oven curing cycle utilised. Additionally, tensile tests revealed promising results showcasing materials' viability against conventional counterparts. Overall, this investigation offers a comprehensive understanding of the cure kinetics, mechanical behaviour, and thermal properties of the novel epoxy-novolac blends, contributing to the development of high-performance materials for sustainable automotive applications.

RESUMEN

Natural minerals play a key role in the burgeoning field of mineral-reinforced polymers, providing an important element in strengthening and toughening the properties of composite materials. This article presents a comprehensive overview of the use of minerals in mineral-reinforced polymers, covering various aspects of their applications and impact on the final properties of these materials. The potential of various types of natural minerals (for example talc, montmorillonite, halloysite, diatomite) as reinforcements in mineral-reinforced polymers is discussed. Techniques for producing mineral-reinforced polymers using minerals, including the mixing method, impregnation, and coating application, are presented in detail. In addition, the effects of process parameters and component ratios on the final properties of mineral-reinforced polymers are discussed. The latest research on the use of minerals in mineral-reinforced polymers is also presented, including their effects on the strength, stiffness, resistance to environmental conditions, and biodegradation of the materials. Finally, the development prospects and potential applications of mineral-reinforced polymers with minerals in various industrial sectors, including packaging, automotive, construction, and medicine, are discussed.

RESUMEN

Processing of cast-iron castings by machining is associated with a large amount of post-production waste in the form of cast-iron chips, which constitute up to about 5% of the weight of the entire casting. In the case of serial production, this generates large amounts of post-production waste, constituting a constantly growing scale of environmental problems. The aim of this research was to develop a simple and cheap method of utilizing post-production waste of gray cast-iron chips from the machining process for the production of small structural elements of water supply fittings. The analysis of the state of knowledge indicates that the simplest method of managing waste chips is to use them as a starting material in the process of manufacturing polymer composites. The most frequently chosen material for the matrix of polymer composites reinforced with metal powders is epoxy resin. The epoxy composite was produced by the vacuum-assisted casting method. This paper presents the results of tests of morphological, mechanical, and corrosion properties of epoxy composites filled with grey cast-iron powder with a grain size below 0.075 mm and a mass content in the composite of 65%. The composite cured at 130 °C for 90 min had the best mechanical properties. The sample cured at 130 °C for 90 min was observed to have the optimum effect, with a tensile strength of 28.35 MPa, a flexural strength of 55.4 MPa, and a compressive strength of 53.8 MPa. All tested composites were characterized by very good thermal resistance and, in comparison to gray cast iron, over 2.5 times lower weight and an over three times lower corrosion rate in the tap water environment.

RESUMEN

In order to further enhance the erosion resistance of cement concrete pavement materials, this study constructed an apparent rough hydrophobic structure layer by spraying a micro-nano substrate coating on the surface layer of the cement concrete pavement. This was followed by a secondary spray of a hydroxy-silicone oil-modified epoxy resin and a low surface energy-modified substance paste, which combine to form a superhydrophobic coating. The hydrophobic mechanism of the coating was then analysed. Firstly, the effects of different types and ratios of micro-nano substrates on the apparent morphology and hydrophobic performance of the rough structure layer were explored through contact angle testing and scanning electron microscopy (SEM). Subsequently, Fourier transform infrared spectroscopy and permeation gel chromatography were employed to ascertain the optimal modification ratio, temperature, and reaction mechanism of hydroxy-silicone oil with E51 type epoxy resin. Additionally, the mechanical properties of the modified epoxy resin-low surface energy-modified substance paste were evaluated through tensile tests. Finally, the erosion resistance of the superhydrophobic coating was tested under a range of conditions, including acidic, alkaline, de-icer, UV ageing, freeze-thaw cycles and wet wheel wear. The results demonstrate that relying solely on the rough structure of the concrete surface makes it challenging to achieve superhydrophobic performance. A rough structure layer constructed with diamond micropowder and hydrophobic nano-silica is less prone to cracking and can form more "air chamber" structures on the surface, with better wear resistance and hydrophobic performance. The ring-opening reaction products that occur during the preparation of modified epoxy resin will severely affect its mechanical strength after curing. Controlling the reaction temperature and reactant ratio can effectively push the modification reaction of epoxy resin through dehydration condensation, which produces more grafted polymer. It is noteworthy that the grafted polymer content is positively correlated with the hydrophobicity of the modified epoxy resin. The superhydrophobic coating exhibited enhanced erosion resistance (based on hydrochloric acid), UV ageing resistance, abrasion resistance, and freeze-thaw damage resistance to de-icers by 19.41%, 18.36%, 43.17% and 87.47%, respectively, in comparison to the conventional silane-based surface treatment.

RESUMEN

In this study, a self-healing epoxy asphalt material was developed by incorporating coumarin groups. This material achieved microcrack self-repair under UV irradiation at 50 °C. Fluorescence microscopy observations and mechanical performance tests demonstrated significant advantages in crack filling and mechanical property recovery after repair, with the fracture toughness of the repaired epoxy asphalt reaching 69% of that in its original state. Furthermore, the synergistic effect of temperature and UV irradiation in the self-healing process enhanced the material's durability and service life. This research offers new insights and methods for developing more durable and long-lasting self-healing asphalt materials, showcasing the great potential of smart materials in infrastructure applications.

RESUMEN

The bisphenol A-type phthalonitrile (BAPH) was blended with the classic epoxy system E51/DDS to prepare the epoxy/phthalonitrile thermoset. The curing kinetics were investigated by differential scanning calorimetry (DSC) using the isoconversional principle, and the average activation energy (Eα) of the E51/DDS curing reaction was found to decrease from 87 kJ/mol to 68.6 kJ/mol. Combining the results of the rheological study, the promoting effect of phthalonitrile on the crosslink of epoxy/amine is confirmed. The curing reaction of the blended resin was characterized using FTIR, and the results showed that BAPH could react with DDS. The thermal behaviors of the thermosets were investigated via DMA and TGA. The glass transition temperature (Tg) is found to increase from 181 °C to 195 °C. The char yield increases from 16% to 59.6% at 800 °C in a N2 atmosphere, which is higher than the calculated value based on the proportional principle. The AFM phase images show that there is no phase separation in the cured thermoset. The results imply that the cured epoxy/amine/phthalonitrile blend is probably a kind of copolymer. The real-time TG-MS indicated that the pyrolysis of the thermoset can be divided into two relatively independent stages, which can be assigned to the cleavage of the E51/DDS network, and the phthalocyanine/triazine/isoindoline, respectively.

RESUMEN

In this study, significant improvements in mechanical properties have been seen through the efficient inclusion of Oil Palm Cellulose Nanofibrils (CNF) as nano-fillers into green polymer matrices produced from biomass with a 28 % carbon content. The goal of the research was to make green epoxy nanocomposites utilizing solution blending process with acetone as the solvent with the different CNF loadings (0.1, 0.25, and 0.5 wt%). An ultrasonic bath was used in conjunction with mechanical stirring to guarantee that CNF was effectively dispersed throughout the green epoxy. The resultant nanocomposites underwent thorough evaluation, comparing them to unfilled green epoxy and evaluating their morphological, mechanical, and thermal behavior using a variety of instruments. Field-emission scanning electron microscopy (FE-SEM) was used to validate findings, which showed that the CNF were dispersed optimally inside the nanocomposites. The thermal degradation temperature (Td) of the nanocomposites showed a marginal decrement of 0.8 % in temperatures (from 348 °C to 345 °C), between unfilled green epoxy (neat) and 0.1 wt% of CNF loading. The mechanical test results, which showed a 13.3 % improvement in hardness and a 6.45 % rise in tensile strength when compared to unfilled green epoxy, were in line with previously published research. Overall, the outcomes showed that green nanocomposites have significantly improved in performance.

Asunto(s)

RESUMEN

To conquer the challenges of charge accumulation and surface flashover in epoxy resin under direct current (DC) electric fields, numerous efforts have been made to research dielectric barrier discharge (DBD) plasma treatments using CF4/Ar as the medium gas, which has proven effective in improving surface flashover voltage. However, despite being an efficient plasma etching medium, SF6/Ar has remained largely unexplored. In this work, we constructed a DBD plasma device with an SF6/Ar gas medium and explored the influence of processing times and gas flow rates on the morphology and surface flashover voltage of epoxy resin. The surface morphology observed by SEM indicates that the degree of plasma etching intensifies with processing time and gas flow rate, and the quantitative characterization of AFM indicates a maximum roughness of 144 nm after 3 min of treatment. Flashover test results show that at 2 min of processing time, the surface flashover voltage reached a maximum of 19.02 kV/mm, which is 25.49% higher than that of the untreated sample and previously reported works. In addition to the effect of surface roughness, charge trap distribution shows that fluorinated groups help to deepen the trap energy levels and density. The optimal modification was achieved at a gas flow rate of 3.5 slm coupled with 2 min of processing time. Furthermore, density functional theory (DFT) calculations reveal that fluorination introduces additional electron traps (0.29 eV) and hole traps (0.38 eV), enhancing the capture of charge carriers and suppressing surface flashover.

RESUMEN

For industrial practical applications, it is difficult to simultaneously endow epoxy resin (EP) composites with superior flame retardancy, smoke suppression, toughness, and low-dielectric constants. Herein, unique polyhedral oligomeric silsesquioxane/polyoxometalate (POM(Mo)-POSS(ibu-Li)) nanosheets were synthesized via a simple one-pot method using laboratory-made lithium-containing hepta-isobutyl-POSS (ibu-Li-POSS) and the low-cost industrial chromogenic agent H3PMo12O40 as raw materials. The incorporation of 2 wt % POM(Mo)-POSS(ibu-Li) nanoflakes into EP significantly enhanced the compatibility between nanoadditives and the EP matrix. Compared with EP, the flexural and impact strengths increased by 36.2 and 78.2%, respectively. Therefore, POM(Mo)-POSS(ibu-Li) has significant advantages in enhancing the toughness of EP compared with existing flame retardants. The dielectric constant and loss were apparently reduced to meet the increasing requirements of EP-type electronic packaging materials and components. Notably, the synthesized POM(Mo)-POSS(ibu-Li) contained various flame-retardant and smoke-suppression elements such as P, Mo, and Si. The ultralow loading (2 wt %) of POM(Mo)-POSS(ibu-Li) significantly reduced the peak heat release rate, peak of smoke production rate, and CO production rate by 43.9, 40.6, and 65.8%, respectively. Meanwhile, the value of LOI increased directly from 24.0% for EP to 30.2% and passed the V-0 rating in the UL-94 test. However, incorporating 5 wt % POSS derivatives into EP alone to ensure that the prepared composites pass the V-0 rating of the UL-94 test has always been an extraordinarily difficult problem. Therefore, the dilemmas of poor dielectric properties, inherent flammability, and brittleness of EP were completely overcome through the successful application of POM(Mo)-POSS(ibu-Li) supramolecular nanosheets.

RESUMEN

The lipoxygenase cascade in plants is a source of oxylipins (oxidized fatty acid derivatives), which play an important role in regulatory processes and formation of plant response to stress factors. Some of the most common enzymes of the lipoxygenase cascade are 13-specific hydroperoxide lyases (HPLs, also called hemiacetal synthases) of the CYP74B subfamily. In this work, we identified and cloned the CYP74B34 gene from carrot (Daucus carota L.) and described the biochemical properties of the corresponding recombinant enzyme. The CYP74B34 enzyme was active towards 9- and 13-hydroperoxides of linoleic (9-HPOD and 13-HPOD, respectively) and α-linolenic (9-HPOT and 13-HPOT, respectively) acids. CYP74B34 specifically converted 9-HPOT and 13-HPOT into aldo acids (HPL products). The transformation of 13-HPOD led to the formation of aldo acids and epoxyalcohols [products of epoxyalcohol synthase (EAS) activity] as major and minor products, respectively. At the same time, conversion of 9-HPOD resulted in the formation of epoxyalcohols as the main products and aldo acids as the minor ones. Therefore, CYP74B34 is the first enzyme with a double HPL/EAS activity described in carrot. The presence of these catalytic activities was confirmed by analysis of the oxylipin profiles for the roots from young seedlings and mature plants. In addition, we substituted amino acid residues in one of the catalytically essential sites of the CYP74B34 and CYP74B33 proteins and investigated the properties of the obtained mutant enzymes.

Asunto(s)

RESUMEN

A new conducting polymer of the cellulose acetate poly acrylonitrile (CAPA)-SiC composite was produced using an in situ oxidative polymerization technique in an aqueous medium. SiC was synthesized from Cinachyrella sp. as a source of carbon and silicon at 1200 °C under an argon atmosphere via a catalytic reduction process. The structure and morphology of the CAPA-SiC composite were characterized using surface area studies (BET), X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FT-IR), and surface morphology (SEM & TEM). To protect copper, the produced CAPA-SiC composite was mixed with commercial epoxy paint using a casting technique, and the copper surface was coated with the three components of the CAPA-SiC/epoxy paint mixture. The corrosion inhibition improvement of the CAPA-SiC/paint coating was assessed using electrochemical impedance spectroscopy followed by Tafel polarization measurements in a 3.5 wt% NaCl solution. The corrosion protection ability of the CAPA-SiC/epoxy coating was found to be outstanding at 97.4% when compared to that of a CAPA/paint coating. SEM and XRD were used to illustrate the coating on the copper surface.