RESUMEN

A composite material, referred to as micropolymer inclusion beads (µPIBs), was fabricated for the first time using a microfluidic technique and applied successfully for the recovery of Au(III) from simulated digests of electronic scrap. Best results for the extraction of Au(III) were achieved with µPIBs consisting of 55% (m/m) poly(vinyl chloride) as the base polymer, 35% (m/m) Aliquat 336 as the extractant, and 10% (m/m) 1-tetradecanol as a modifier. The size and surface morphology of the µPIBs were examined using optical microscopy and scanning electron microscopy, respectively. A batch of 200 mg µPIBs allowed the complete and selective extraction of Au(III) (2.85 mg) from 50 mL of a simulated digest of electronic scrap containing other metal ions, including 1365 mg Cu(II). The extracted Au(III) was quantitatively stripped from the µPIBs into 50 mL of 0.1 mol L-1 solution of thiourea. No Cu(II) and only sub-microgram levels of Cd(II) and Zn(II) were detected in this solution, thus confirming the suitability of the µPIBs for the efficient recovery of Au(III) from digests of electronic scrap. The microfluidic method used in this study is expected to be applicable for the fabrication of µPIBs for the selective separation of other chemical species by varying the composition of the beads.

RESUMEN

In this article, the application of a polymer film containing the ionic liquid Cyphos IL 101 for the simultaneous recovery of precious and heavy metal ions ((Ni(II), Zn(II), Co(II), Cu(II), Sn(II), Pb(II), Ag(I), Pd(II), and Au(III)) from waste electrical and electronic equipment (WEEE) is described. The experiments were performed for solutions containing metal ions released from computer e-waste due to leaching carried out with concentrated nitric(V) acid and aqua regia. It was found that the applied polymer film allows for the efficient recovery of precious metals (98.9% of gold, 79.3% of silver, and 63.6% of palladium). The recovery of non-ferrous metals (Co, Ni, Cu, Zn, Sn, and Pb) was less efficient (25-40%). Moreover, the results of the performed sorption/desorption processes show that the polymer film with Cyphos IL 101 can be successfully used after regeneration to recover metals ions several times.

RESUMEN

Workers in several industries are occupationally exposed to flame retardants. This study characterizes flame retardant exposure for nine industries through air and hand wipe measures for 105 workers. Specifically, we analyzed 24 analytes from three chemical classes: organophosphate flame retardants (OFRs), polybrominated diphenyl ethers (PBDEs), and non-PBDE brominated flame retardants (NPBFRs). The industries were: carpet installation, chemical manufacturing, foam manufacturing, electronic scrap, gymnastics, rigid board installation, nail salons, roofing, and spray polyurethane foam. Workers wore personal air samplers for two entire workdays and provided hand wipe samples before and after the second work day. Bulk products were also analyzed. The air, hand wipe and bulk samples were evaluated for relevant flame retardants. Spray polyurethane foam workers' tris(1-chloro-2-propyl) phosphate air (geometric mean = 48,500 ng/m3) and hand wipe (geometric mean = 83,500 ng per sample) concentrations had the highest mean industry concentration of any flame retardant analyzed in this study, followed by triphenyl phosphate air concentration and tris(1,3-dichloro-2-propyl) phosphate hand wipe concentration from chemical manufacturers. Overall, OFR air and hand wipe concentrations were higher and more prevalent than PBDEs or non-PBDE brominated flame retardants. Some industries including spray polyurethane foam application, chemical manufacturing, foam manufacturing, nail salons, roofing, and rigid polyiso board installation had high potential for both air and hand exposure to OFRs. Carpet installers, electronic scrap workers, and gymnastic workers had exposures to all three classes of flame retardants including PBDEs, which were phased out of production in 2013. Air and dermal exposures to OFRs are prevalent in many industries and are replacing PBDEs in some industries.

Asunto(s)

RESUMEN

PURPOSE OF REVIEW: Electronic waste (e-waste) is a global public health challenge. E-waste recycling workers may be exposed to chemical, physical, ergonomic, and psychosocial hazards. This review provides an overview of recent research on occupational exposures in e-waste recycling and work-related health effects that can impact e-waste workers. RECENT FINDINGS: E-waste workers are exposed to a variety of chemicals including metals, particulates, persistent organic compounds, and flame retardants. Exposure varies according to job task with higher exposures observed for dismantling and burning e-waste. Exposure to job stress and physical hazards (e.g., noise) also occurs. Many studies have measured workers' exposure in the e-waste recycling industry; fewer have investigated health effects. Biological measures were reported more often than external exposure measures. In order to protect workers, efforts are required to better understand exposures and their health effects. Removing hazardous materials from electronic equipment and reducing e-waste production would benefit workers, communities, and the environment.

Asunto(s)

RESUMEN

Surface wipe sampling in the occupational environment is a technique widely used by industrial hygienists. Although several organizations have promulgated standards for sampling lead and other metals, uncertainty still exists when trying to determine an appropriate wipe sampling strategy and how to interpret sampling results. Investigators from the National Institute for Occupational Safety and Health (NIOSH) Health Hazard Evaluation Program have used surface wipe sampling as part of their exposure assessment sampling strategies in a wide range of workplaces. This article discusses wipe sampling for measuring lead on surfaces in three facilities: (1) a battery recycling facility; (2) a firing range and gun store; and (3) an electronic scrap recycling facility. We summarize our findings from the facilities and what we learned by integrating wipe sampling into our sampling plan. Wiping sampling demonstrated lead in non-production surfaces in all three workplaces and that the potential that employees were taking lead home to their families existed. We also found that the presence of metals such as tin can interfere with the colorimetric results. We also discuss the advantages and disadvantages of colorimetric analysis of surface wipe samples and the challenges we faced when interpreting wipe sampling results.

Asunto(s)

RESUMEN

A system composed of persulfate salt and ammonia in highly alkaline aqueous solution is developed and examined for leaching metallic silver from elements of the electronic waste materials (e-scrap). Strong base activates persulfate ions providing in situ generation of highly reactive oxygen molecules. The oxidized metal forms then well soluble complex ions with ammonia ligands. The kinetic studies of the leaching process were performed for pure metallic silver. They revealed that the efficiency of the process is affected by the type of the persulfate salt. By employing potassium persulfate one obtains significantly (more than 50% for silver plates and more than 100% for silver powder) increased efficiency of silver dissolution compared to the solution composed of either sodium or ammonium persulfates. In the range of persulfate concentrations between 0.02 and 0.23mol/L the apparent reaction order with respect to the persulfate concentration was similar for all persulfate salts and was estimated to be around 0.5. The room temperature (22±2°C) seems to be an optimal temperature for the leaching process. An increase in the temperature resulted in the significant drop in the silver dissolution rate due to the decreased solubility of oxygen. Based on these results a possible mechanism of dissolving silver is discussed and the optimal composition of the leaching solution is formulated. The obtained formulation of the leaching solution was applied for the extraction of silver coatings of Cu-based e-waste scrap and the obtained results revealed an important effect of copper in the mechanism of the leaching process. The regression analysis of the leaching curve indicated that each gram of base-activated potassium persulfate under the specified conditions may leach almost 100mg of silver coatings in a form of well soluble diamminesilver (I) complex. The silver complex can be relatively easy reduced to metallic silver. The method developed is relatively cheap, low toxic and does not produce harmful by-products.

Asunto(s)

RESUMEN

Many metals found in electronic scrap are known to cause serious health effects, including but not limited to cancer and respiratory, neurologic, renal, and reproductive damage. The National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention performed three health hazard evaluations at electronic scrap recycling facilities in the U.S. to characterize employee exposure to metals and recommend control strategies to reduce these exposures. We performed air, surface, and biological monitoring for metals. We found one overexposure to lead and two overexposures to cadmium. We found metals on non-production surfaces, and the skin and clothing of workers before they left work in all of the facilities. We also found some elevated blood lead levels (above 10 micrograms per deciliter), however no employees at any facility had detectable mercury in their urine or exceeded 34% of the OELs for blood or urine cadmium. This article focuses on sampling results for lead, cadmium, mercury, and indium. We provided recommendations for improving local exhaust ventilation, reducing the recirculation of potentially contaminated air, using respirators until exposures are controlled, and reducing the migration of contaminants from production to non-production areas. We also recommended ways for employees to prevent taking home metal dust by using work uniforms laundered on-site, storing personal and work items in separate lockers, and using washing facilities equipped with lead-removing cleaning products.

Asunto(s)

RESUMEN

The National Institute for Occupational Safety and Health (NIOSH) surveyed a randomly selected sample of electronic scrap (e-scrap) recycling facilities nationwide to characterize work processes, exposures, and controls. Despite multiple attempts to contact 278 facilities, only 47 responded (17% response rate). Surveyed facilities reported recycling a wide variety of electronics. The most common recycling processes were manual dismantling and sorting. Other processes included shredding, crushing, and automated separation. Many facilities reported that they had health and safety programs in place. However, some facilities reported the use of compressed air for cleaning, a practice that can lead to increased employee dust exposures, and some facilities allowed food and drinks in the production areas, a practice that can lead to ingestion of contaminants. Although our results may not be generalizable to all US e-scrap recycling facilities, they are informative regarding health and safety programs in the industry. We concluded that e-scrap recycling has the potential for a wide variety of occupational exposures particularly because of the frequent use of manual processes. On-site evaluations of e-scrap recyclers are needed to determine if reported work processes, practices, and controls are effective and meet current standards and guidelines. Educating the e-scrap recycling industry about health and safety best practices, specifically related to safe handling of metal dust, would help protect employees.

Asunto(s)