RESUMEN

The development of bend-induced effectively single-mode fiber with a square cross-section and flat top-hat intensity distribution is reported using core topology nanostructuring dedicated to femtosecond laser ablation systems. The fiber's core comprises 5419 silica and germanium-doped silica nanorods with a diameter of 430 nm each arranged into a hexagonal lattice. The distribution of the rods is calculated using in-house developed code based on the Monte Carlo algorithm to obtain a target shape of mode and intensity distribution. As a proof-of-concept, a silica nanostructured fiber with a 24 µm core is developed and verified against the purity of mode guidance, bending, and guiding losses. It is shown that for a wavelength of 1030 nm, the fiber is effectively single-mode with 96% mode purity when bending with a radius of 20 cm is applied. The fiber has a measured mode area of 360 µm2, numerical aperture of 0.03, and total losses of 0.07 dB m-1.

RESUMEN

With the increasing demand for sensing platforms operating across UV, visible, and near-infrared wavelengths, nanoporous gold has emerged as an ideal substrate for rapid, quantitative detection of analytes with excellent specificity and high sensitivity. This study investigates thickness-mediated compositional changes and their impact on scattering characteristics of thin nanoporous gold films fabricated using selective chemical etching. Specifically, we observe thickness-induced morphological and structural changes across different fabricated samples from 25 to 100 nm in thickness. Upon their optical characterization across UV-VIS-NIR spectral regime, we notice that the constitutional differences among samples manifest distinctively & deterministically in their total optical scattering response. In order to gain insights into these observed scattering responses and to fathom the subtle connections between structural properties of NPG films and their optical response, a hybrid theoretical model comprising Maxwell-Garnett & Bruggeman effective medium approximations has been adopted. Our approach not only allows to appropriately account for the inhomogeneous nature of these films, but also corroborates well with the atomic force microscopy characterizations of the fabricated samples. Furthermore, tracing such a theoretical model is important as it helps in systematically ascertaining additional loss terms emerging in the complex dielectric function of films due to their nanoscale porosity & roughness, permitting a good reproduction of measured optical spectra. We believe, our approach will not only facilitate accurate regulation of losses in NPG thin films but will also aid in deriving customized optical performance from them, thereby advancing their potential applications in sensing and beyond.

RESUMEN

The severe climate and energy issues require more environmentally friendly and efficient cooling methods. Radiative cooling offers a cooling solution with significant advantages. However, current radiative cooling technologies focus primarily on seeking perfect materials to achieve complete wavelength absorption. However, numerous research studies have shown that achieving such a perfect scenario is not feasible. Here, inspired by the surface of the Cerambycini Latreille, the inherent mechanism of radiative cooling functionality in the unique structure of these hairs is revealed using effective medium theory and Finite Difference Time Domain (FDTD) optical simulation analysis. Through alkaline etching and template methods, a biomimetic radiative cooling film (BRCF) was successfully fabricated. The BRCF not only efficiently reflects solar radiation but also enhances absorption in the atmospheric window wavelength range. The radiative cooling mechanism proposed in this study and the BRCF presented here may inspire researchers to further explore the field of structural radiative cooling.

RESUMEN

Accurate measurements of the thermal conductivity (κ) of porous thin films are still limited due to challenges to deposit flat and continuous metal transducers on porous samples, a necessity for many thermal measurement techniques for nanostructures. In this paper, we introduce an approach based on time-domain thermoreflectance (TDTR) to accurately and conveniently measure κ of porous thin films by transferring a flat and smooth metal film unto porous samples as the transducer for TDTR measurements. We demonstrate our approach by measuring κ of a series of microscale holey SiO2 films with diameters of 1-3.5 µm and porosity of 13-50%. To achieve a measurement uncertainty of <12%, we ensure that the metal transducer films are sufficiently stiff and establish good thermal contact with the holey SiO2 samples. Our κ measurements agree well with calculations of κ from effective medium theory. Our approach could provide a convenient way to further investigate the thermal transport properties of porous films.

RESUMEN

A detailed analysis of intra-particle volumes and layer thicknesses and their effect on the diffusion of solutes in hydrophilic interaction liquid chromatography (HILIC) was made. Pycnometric measurements and the retention volume of deuterated mobile phase constituents (water and acetonitrile) were used to estimate the void volume inside the column, including not only the volume of the mobile phase but also part of the enriched water solvent acting as the stationary phase in HILIC. The mobile phase (hold-up) volume accessible to non-retained components was estimated using a homologous series approach. The joint analysis of the different approaches indicated the formation of enriched water layers on the hydrophobic silica mesopore walls with a thickness varying significantly with mobile phase composition. The maximal thickness of the enriched water layers, which corresponded to the minimum void volume accessible to unretained solutes, marked a transition in the retention behavior of the studied analytes. Discrepancies between deuterated solvent measurements and pycnometry were explained by the existence of an irreplaceable water layer adsorbed on the silica surface. Regarding the diffusion behavior in HILIC, peak parking experiments were used to interpret the influence of the acetonitrile content on the effective diffusion coefficient Deff. A systematic decrease in Deff and molecular diffusion Dm was observed with decreasing acetonitrile concentration, primarily attributed to variations in mobile phase viscosity. Notably, Deff/Dm remained nearly unaffected by variations in mobile phase composition. Finally, the effective medium theory was used to make a comprehensive analysis of Dpart/Dm to study the contribution to band broadening when the solute resides in the mesopores. The obtained data unveiled a curvature with a minimum corresponding to conditions of maximum water-layer thickness and retention. For the weakly retained compounds (k' < 0.5) the Dpart/Dm-values were found to be relatively high (order of 0.35-0.5), which directly reflects the high γsDs/Dm-values that were observed (order 0.35-7).

Asunto(s)

RESUMEN

In this paper, a comprehensive theoretical framework for understanding surface-enhanced Raman scattering (SERS) measurements in both solution and thin-film setups, focusing on electromagnetic enhancement principles, was presented. Two prevalent types of SERS substrates found in the literature were investigated: plasmonic colloidal particles, including spherical and spheroid nanoparticles, nanoparticle diameters, and thin-film-based SERS substrates, like ultra-thin substrates, bundled nanorods, plasmonic thin films, and porous thin films. The investigation explored the impact of analyte adsorption, orientation, and the polarization of the excitation laser on effective SERS enhancement factors. Notably, it considered the impact of analyte size on the SERS spectrum by examining scenarios where the analyte was significantly smaller or larger than the hot spot dimensions. The analysis also incorporated optical attenuations arising from the optical properties of the analyte and the SERS substrates. The findings provide possible explanations for many observations made in SERS measurements, such as variations in relative peak intensities during SERS assessments, reductions in SERS intensity at high analyte concentrations, and the occurrence of significant baseline fluctuations. This study offers valuable guidance for optimizing SERS substrate design, enhancing SERS measurements, and improving the quantification of SERS detection.

RESUMEN

Controlling and manipulating surface waves is highly beneficial for imaging applications, nanophotonic device design, and light-matter interactions. While deep-subwavelength structuring of the metal-dielectric interface can influence surface waves by forming strong effective anisotropy, it disregards important structural degrees of freedom such as the interplay between corrugation periodicity and depth and its effect on the beam transport. Here, we unlock these degrees of freedom, introducing weakly modulated metasurfaces, structured metal-dielectric surfaces beyond effective medium. We utilize groove-structuring with varying depths and periodicities to demonstrate control over the transport of surface waves, dominated by the depth-period interplay. We show unique backward focusing of surface waves driven by an umklapp process-momentum relaxation empowered by the periodic nature of the structure and discover a yet unexplored, dual-stage topological transition. Our findings can be applied to any type of guided wave, introducing a simple and versatile approach for controlling wave propagation in artificial media.

RESUMEN

We have developed a nonlocal effective medium theory (EMT) for phononic temporal metamaterials using the multiscale technique. Our EMT yields closed-form expressions for effective constitutive parameters and reveals these materials as reciprocal media with symmetric band dispersion. Even without spatial symmetry breaking, nonzero Willis coupling coefficients emerge with time modulation and broken time-reversal symmetry, when the nonlocal effect is taken into account. Compared to the local EMT, our nonlocal version is more accurate for calculating the bulk band at high wavenumbers and essential for understanding nonlocal effects at temporal boundaries. This nonlocal EMT can be a valuable tool for studying and designing phononic temporal metamaterials beyond the long-wavelength limit.

RESUMEN

Optical anisotropy of α-MoO3 in its reststrahlen (RS) bands provides exciting opportunities for constructing the polarization-dependent devices. However, achieving broadband anisotropic absorptions through the same α-MoO3 arrays is still challenging. In this study, we demonstrate that selective broadband absorption can be achieved by using the same α-MoO3 square pyramid arrays (SPAs). For both the x and y polarizations, the absorption responses of the α-MoO3 SPAs calculated by using the effective medium theory (EMT) agreed well with those of the FDTD, indicating the excellent selective broadband absorption of the α-MoO3 SPAs are associated with the resonant hyperbolic phonon polaritons (HPhPs) modes assisted by the anisotropic gradient antireflection (AR) effect of the structure. The near-field distribution of the absorption wavelengths of the α-MoO3 SPAs shows that the magnetic-field enhancement of the lager absorption wavelength tends to shift to the bottom of the α-MoO3 SPAs due to the lateral Fabry-Pérot (F-P) resonance, and the electric-field distribution exhibits the ray-like light propagation trails due to the resonance nature of the HPhPs modes. In addition, broadband absorption of the α-MoO3 SPAs can be maintained if the width of the bottom edge of the α-MoO3 pyramid is large than 0.8 µm, and excellent anisotropic absorption performances are almost immune to the variations of the thickness of the spacer and the height of the α-MoO3 pyramid.

RESUMEN

With the emergence of various filtering technologies, the radar jamming efficiency of the technology based on radar cross section is ever lower, therefore cannot meet military requirements. In this context, the jamming technology based on attenuation mechanism has been developed and plays an increasingly important role in disturbing radar detecting. Magnetically expanded graphite (MEG) has excellent attenuation efficiency because it can cause dielectric loss as well as magnetic loss. Moreover, MEG features good impedance matching, which makes more incidence of electromagnetic waves into the material; and its multi-layer structure is conducive for electromagnetic wave reflection and absorption. In this work, the structure model of MEG was established by analyzing the layered structure of expanded graphite (EG) and the dispersion of intercalated magnetic particles. The electromagnetic parameters of thus-modeled MEG were calculated based on the equivalent medium theory; and effects of EG size, magnetic particle type and volume fraction on the attenuation performance were studied by the variational method. It is indicated that MEG with 500-µm diameter has the best attenuation effect and the highest increment of absorption cross section appears at 50% volume fraction of the magnetic particles at 2 GHz. The imaginary part of complex permeability of the magnetic material has the most significant influence on the attenuation effect of MEG. This study provides guidance for the design and application of MEG materials in disturbing radar detecting field.

RESUMEN

HYPOTHESIS: The dielectric constant of an electrolyte solution, which determines electrostatic interactions between colloids and interfaces, depends nonlinearly on the salinity and also on the type of salt. The linear decrement at dilute solutions is due to the reduced polarizability in the hydration shell around an ion. However, the full hydration volume cannot explain the experimental solubility, which indicates the hydration volume should decrease at high salinity. Volume reduction of the hydration shell is supposed to weaken dielectric decrement and thus should be relevant to the nonlinear decrement. SIMULATIONS: According to the effective medium theory for the permittivity of heterogeneous media, we derive an equation which relates the dielectric constant with the dielectric cavities created by the hydrated cations and anions, and the effect of partial dehydration at high salinity is taken into account. FINDINGS: Analysis of experiments on monovalent electrolytes suggests that weakened dielectric decrement at high salinity originates primarily from the partial dehydration. Furthermore, the onset volume fraction of the partial dehydration is found to be salt-specific, and is correlated with the solvation free energy. Our results suggest that while the reduced polarizability of the hydration shell determines the linear dielectric decrement at low salinity, ion-specific tendency of dehydration is responsible for nonlinear dielectric decrement at high salinity.

RESUMEN

The quantum optics of metamaterials starts with the question of whether the same effective-medium theories apply as in classical optics. In general, the answer is negative. For active plasmonics but also for some passive metamaterials, we show that an additional effective-medium parameter is indispensable besides the effective index, namely, the effective noise-photon distribution. Only with the extra parameter can one predict how well the quantumness of states of light is preserved in the metamaterial. The fact that the effective index alone is not always sufficient and that one additional effective parameter suffices in the quantum optics of metamaterials is both of fundamental and practical interest. Here, from a Lagrangian description of the quantum electrodynamics of media with both linear gain and loss, we compute the effective noise-photon distribution for quantum light propagation in arbitrary directions in layered metamaterials, thereby detailing and generalizing our previous work. The effective index with its direction and polarization dependence is the same as in classical effective-medium theories. As our main result, we derive both for passive and for active media how the value of the effective noise-photon distribution too depends on the polarization and propagation directions of the light. Interestingly, for s-polarized light incident on passive metamaterials, the noise-photon distribution reduces to a thermal distribution, but for p-polarized light it does not. We illustrate the robustness of our quantum optical effective-medium theory by accurate predictions both for power spectra and for balanced homodyne detection of output quantum states of the metamaterial.

RESUMEN

The present work analyses the transmittance and reflectance spectra of molybdenum trioxide film doped by silver nanoparticles as a function of angle of incidence and wavelength. As will be seen in this work, at values of angle of incidence below 40 degrees and with volume filling fraction below 1% also, some differences between the two effective medium theories are presented. First, the volume filling fraction is limited for low values (<1%) and second the scattering amplitude cannot be ignored for these cases. The novelty of this work is that the use of the effective medium model (refractive index) shows limitations in the description of the optical properties when it was applied to thin solid films.

RESUMEN

We studied the nonlinear optical response of metallic amorphous composite layers in terms of a self-phase-modulated, third-order Kerr nonlinearity. A nonlinear effective medium theory was used to describe low densities of gold and iridium nanoparticles embedded in an equally nonlinear host material. The fill fraction strongly influences the effective nonlinear susceptibility of the materials, increasing it by orders of magnitude in the case of gold due to localized surface plasmonic resonances. The enhancement of the nonlinear strength in amorphous composites with respect to the bulk material has an upper limit in metallic composites as dominating absorption effects take over at higher fill factors. Both saturated and induced absorption in the thin films of amorphous composites were observed depending on the selected frequency and relative position to the resonant frequency of electron excitation in the metallic inclusions. We demonstrated the depths to which thin films are affected by nonlinear enhancement effects.

RESUMEN

We investigate the third-order nonlinear optical properties of epsilon-near-zero (ENZ) Au/dye-doped fused silica multilayered metamaterials in the visible spectral range for TM incident by using nonlocal effective medium theory at different incidence angles. The nonlocal response affects the permittivity of anisotropic metamaterials when the thickness of the layer cannot be much smaller than the incident wavelength. By doping pump dye gain material within the dielectric layer to compensate for the metal loss, the imaginary part of the effective permittivity is reduced to 10-4, and the optical nonlinear refractive index and nonlinear absorption coefficient are enhanced. The real and imaginary parts of the permittivity are simultaneously minimized when the central emission wavelength of the gain material is close to the ENZ wavelength, and the nonlinear refraction coefficient reaches the order of 10-5 cm2/W, which is five orders of magnitude larger than that of the nonlinear response of the metamaterial without the gain medium. Our results demonstrate that a smaller imaginary part of the permittivity can be obtained by doping gain materials within the dielectric layer; it offers the promise of designing metamaterials with large nonlinearity at arbitrary wavelengths.

RESUMEN

Nanoscale radiative thermal transport between a pair of metamaterial gratings is studied within this work. The effective medium theory (EMT), a traditional method to calculate the near-field radiative heat transfer (NFRHT) between nanograting structures, does not account for the surface pattern effects of nanostructures. Here, we introduce the effective approximation NFRHT method that considers the effects of surface patterns on the NFRHT. Meanwhile, we calculate the heat flux between a pair of silica (SiO2) nanogratings with various separation distances, lateral displacements, and grating heights with respect to one another. Numerical calculations show that when compared with the EMT method, here the effective approximation method is more suitable for analyzing the NFRHT between a pair of relatively displaced nanogratings. Furthermore, it is demonstrated that compared with the result based on the EMT method, it is possible to realize an inverse heat flux trend with respect to the nanograting height between nanogratings without modifying the vacuum gap calculated by this effective approximation NFRHT method, which verifies that the NFRHT between the side faces of gratings greatly affects the NFRHT between a pair of nanogratings. By taking advantage of this effective approximation NFRHT method, the NFRHT in complex micro/nano-electromechanical devices can be accurately predicted and analyzed.

RESUMEN

Nano approaches are practical strategies to boost the thermoelectric figure of merit due to the strong phonon scattering from the grain boundaries and nanoinclusions. Here, we have reported a strong phonon scattering at the heterogeneous interfaces of Mg2Sn/Mg3Sb2 high-content nanocomposites (HCnCs). As a result, a significantly reduced lattice thermal conductivity of 1.09 W m-1 K-1 was observed in the equimolar Mg2Sn/Mg3Sb2 HCnC, 80% lower than pure Mg2Sn and 25% lower than pure Mg3Sb2. As a result, a high ZT ∼ 1.13 at 773 K was achieved in the Mg2Sn/Mg3Sb2 HCnC. Furthermore, various defects, including solid solutions, nanoinclusions, and misfit dislocations, were observed in both the Mg3Sb2 phase and the Mg2Sn phase through the microstructure characterization.

RESUMEN

From the theory of two-phase composites it is concluded that in the concentration dependence of the Seebeck coefficient S a kink can occur precisely at S=0 absolute if the two phases have different kinds of carriers, electrons and holes, and if the phase grains are spherical without preferred orientations and arranged in a symmetrical fashion. This feature, indeed found to be realized in amorphous Cr1-xSix thin films deposited by ion beam sputtering from Cr-Si alloy targets, can be applied to make reference standards for S=0 at room temperature and even at higher temperatures. Additionally, it may be used to design a thermopower switch between S=0 and S≠0. It is also concluded that the structure realized in any alloy during solidification does not only depend on the diffusion mobility of the atoms and on the existence of a (relative) minimum in the Gibbs' free energy. It depends also on the fact whether this structure is compatible with the demand that (spatial) continuity of the entropy and energy flux densities and their gradients is saved during the solidification process.

RESUMEN

This paper investigates the spontaneous decay rate of elliptical plasmonic nanostructures. The refractive index was analyzed using the effective medium theory (EMT). Then, the polarizability, spontaneous radiative, non-radiative decay rate, and electric field enhancement factor were characterized for the targeted elliptical nanostructures at different aspect ratios. All of the optical analyses were analyzed at different distances between the excited fluorescent coupled atom and the plasmonic nanostructure (down to 100 nm). This work is promising in selecting the optimum elliptical nanostructure according to the required decay rates for optical conversion efficiency control in energy harvesting for solar cells and optical sensing applications.

RESUMEN

This work focused on the application of the effective medium theory to describe the extinction coefficient (Qext) in molybdenum trioxide (MoO3) doped with different kinds of plasmonic nanoparticles, such as silver (Ag), gold (Au), and copper (Cu). Usually, in studies of these materials, it is normal to analyze the transmission or absorption spectra. However, the effect of this type or size of nanoparticles on the spectra is not as remarkable as the effect that is found by analyzing the Qext of MoO3. It was shown that the ß-phase of MoO3 enhanced the intensity response of the Qext when compared to the α-phase of MoO3. With a nanoparticle size of 5 nm, the Ag-doped MoO3 was the configuration that presents the best response in Qext. On the other hand, Cu nanoparticles with a radius of 20 nm embedded in MoO3 was the configuration that presented intensities in Qext similar to the cases of Au and Ag nanoparticles. Therefore, implementing the effective medium theory can serve as a guide for experimental researchers for the application of these materials as an absorbing layer in photovoltaic cells.