RESUMEN

PURPOSE: This investigation aimed to examine the mediating effect of inflammatory biomarkers on the relationship between dust exposure and lung function levels among steelworkers. METHODS: The study comprised 2,315 front-line workers employed at an iron and steel company in Tangshan, who underwent occupational health assessments through cluster sampling. Demographic and lifestyle data were collected via a self-administered questionnaire, while physical examinations measured parameters such as height and weight. Lung function was assessed using a portable pulmonary function tester (CHEST). Blood cell counts were uniformly analyzed using a Mindray fully automated biochemistry analyzer (BS-800). Inflammatory biomarkers, including leukocyte count, neutrophil count, lymphocyte count, and platelet count, were assessed, and the neutrophil-to-lymphocyte ratio and systemic immune inflammation index were computed. Generalized linear models and Spearman rank correlation analyses were employed to explore the interplay among dust exposure, inflammatory biomarkers, and alterations in lung function. A mediation analysis model was constructed to elucidate how inflammatory biomarkers mediate the relationship between dust exposure and lung function levels. RESULTS: After adjusting for covariates, dust exposure was significantly associated with reduced lung function levels, with statistically significant differences observed between dust-exposed and non-exposed groups across various lung function indicators (P < 0.001). In the dust-exposed group, inflammatory biomarkers were elevated, showing significant correlations with FVC and FEV1 (P < 0.05). However, the correlation between FEV1/FVC and various inflammatory biomarkers was insignificant (P > 0.05). Mediation analysis revealed that white blood cells and neutrophils partially mediated the association between dust exposure and FVC, with proportions of 1.75% and 1.09%, respectively. Similarly, white blood cells, neutrophils, and the systemic immune inflammation index partially mediated the association between dust exposure and FEV1, with proportions of 1.15%, 0.82%, and 0.82%, respectively. CONCLUSION: In conclusion, dust exposure poses a risk for decreased lung function levels. Inflammatory biomarkers derived from blood cells offer a valuable and easily obtainable means of identifying changes in lungfunction levels. Among these biomarkers, white blood cells, neutrophils, and the systemic immune inflammation index significantly mediate the association between dust exposure and lung function levels, although further exploration is needed to understand their underlying mechanisms.

RESUMEN

Crystalline silica is a Group I lung carcinogen primarily known as a causative agent for silicosis. A study was performed to quantify respirable dust, and respirable crystalline silica (RCS) in the rice mills of northeast India. Seventy-two respirable dust samples were collected from the worker's breathing zone from four rice mills at three locations: feeding, sieving, and polishing sections for two paddy varieties: Ranjit and Sali. The National Institute of Occupational Safety and Health (NIOSH), method #7602, was used to determine RCS. The results show that geometric mean TWA dust and RCS emissions in the rice mills varied from 3.97 to 455.00 mg/m3 and 0.02 to 5.38 mg/m3, respectively. RCS exposures were higher during milling of the Sali variety paddy (GM: 0.76 mg/m3) than the Ranjit variety paddy (GM: 0.25 mg/m3). Respirable dust and RCS emissions were considerably higher in the feeding and sieving sections than in the polishing section. Respirable dust and RCS exposure varied significantly (p < 0.001) with paddy variety. Respirable dust and RCS were highly correlated for different rice mills; however, the proportion of RCS in the dust was higher in the Sali variety paddy than in the Ranjit variety paddy. RCS exposure to the workers at the feeding and sieving sections was observed to be higher than the occupational exposure limits (OELs) published by Safe Work Australia, American Conference of Governmental Industrial Hygienists (ACGIH), National Institute for Occupational Safety and Health (NIOSH), Health and Safety Executive (HSE), and Factories Amendment Act, 1987, Government of India.

RESUMEN

STUDY OBJECTIVES: We have previously estimated that the prevalence of obstructive sleep apnea (OSA) among World Trade Center (WTC) rescue and recovery workers is 75% and identified that having symptoms of chronic rhinosinusitis (CRS) is an independent risk factor for OSA in this population. Nasal inflammation and/or elevated awake nasal resistance that carried over into sleep could explain this association. To understand the mechanism(s) for the elevated risk of OSA observed in WTC responders with chronic rhinosinusitis (CRS) symptoms we examined if elevated awake supine nasal resistance was associated with OSA, CRS and/or nasal inflammatory biomarkers. METHODS: 601 individuals (83% male, average age 53 years, BMI=29.9 ± 5.5 kg/m2) enrolled in the WTC Health Program and without significant pre-9/11 snoring, underwent two nights of home sleep apnea testing, measurements of anterior rhinomanometry in the supine position, and nasal lavage. RESULTS: Awake supine nasal resistance was not associated with OSA; 74.8% and 74.4% of the participants with low and high nasal resistance respectively, had OSA (P=NS). Patients with CRS had elevated nasal inflammatory markers (IL6, IL8, ECP and Neut) but did not have high nasal resistance. Nasal inflammatory markers were not correlated with nasal resistance. CONCLUSIONS: As awake nasal resistance did not explain the relationship of CRS to OSA in this large and well characterized dataset, our findings suggest that either "sleep" nasal resistance or other factors such as increased supraglottic inflammation, perhaps through impairing upper airway reflex mechanisms, or systemic inflammation are involved in the pathophysiology of OSA in the WTC population.

RESUMEN

The 2021 tuberculosis (TB) preventive treatment guidelines in India included silicosis as a screening group, yet latent TB infection (LTBI) testing for silica-dust-exposed individuals is underemphasized. Focusing on an estimated 52 million silica-dust-exposed workers, particularly agate-stone workers in Khambhat, Gujarat, our study aims to estimate LTBI prevalence, identify predictors, and gather insights from TB and silicosis experts. Employing a sequential explanatory mixed-methods approach, a cross-sectional study involved 463 agate-stone workers aged ≥ 20 years in Khambhat, using IGRA kits for LTBI testing. In-depth interviews with experts complemented quantitative findings. Among agate-stone workers, 58% tested positive for LTBI, with predictors including longer exposure, type of work, and BCG vaccination. Our findings reveal a nearly double burden of LTBI compared to the general population, particularly in occupations with higher silica dust exposure. Experts advocate for including silica-dust-exposed individuals in high-risk groups for LTBI testing, exploring cost-effective alternatives like improved skin sensitivity tests, and shorter TB preventive treatment regimens to enhance compliance. Future research should explore upfront TB preventive treatment for silica-dust-exposed individuals with high LTBI prevalence and optimal exposure duration. This study underscores the urgent need for policy changes and innovative approaches to TB prevention among silica-dust-exposed populations, impacting global occupational health strategies.

Asunto(s)

RESUMEN

Background: Occupational health is closely related to harmful factors in the workplace. Dust is the primary contributing factor causing impaired lung ventilation function among employees with dust exposure, and their lung ventilation function may also be influenced by other factors. We aimed at assessing the status and influencing factors of lung ventilation function among employees exposed to dust in the enterprises of the Eighth Division located in the Xinjiang Production and Construction Corps (XPCC), China. Methods: Employees exposed to dust in enterprises of the Eighth Division located in the XPCC in 2023 were selected as the subjects of this cross-sectional study. Their lung ventilation function indicators were extracted from health examination records, and an on-site electronic questionnaire survey was conducted among them. Binary logistic regression analyses were conducted to evaluate the factors influencing lung ventilation function. Results: According to the fixed value criteria, the abnormal rates of forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), and FEV1/FVC were 31.6, 1.4, and 0.4%, respectively. The lower limit of normal (LLN) criteria could overestimate the rate of abnormal lung ventilation function. Several factors were related to impaired lung ventilation function, including gender, age, education level, marital status, body mass index (BMI), smoking status, physical activity, the type of dust, industry, enterprise scale, occupation, length of service, working shift, monthly income, and respiratory protection. Conclusions: A relatively low abnormal rate of lung ventilation function was observed among employees exposed to dust in enterprises of the Eighth Division, XPCC, and their lung ventilation function was associated with various factors. Effective measures should be taken urgently to reduce the effects of adverse factors on lung ventilation function, thereby further protecting the health of the occupational population.

Asunto(s)

RESUMEN

OBJECTIVE: Whether coal mine dust exposure increases cardiovascular diseases (CVDs) risk was rarely explored. Our objective was to examine the association between coal mine dust exposure and cardiovascular risk. METHODS: We estimated cumulative coal mine dust exposure (CDE) for 1327 coal miners by combining data on workplace dust concentrations and work history. We used brachial-ankle pulse wave velocity (baPWV, a representative indicator of arterial stiffness) and ten-year atherosclerotic cardiovascular disease (ASCVD) risk to assess potential CVD risk, exploring their associations with CDE. RESULTS: Positive dose-response relationships of CDE with baPWV and ten-year ASCVD risk were observed after adjusting for covariates. Specifically, each 1 standard deviation (SD) increase in CDE was related to a 0.27 m/s (95% CI: 0.21, 0.34) increase in baPWV and a 1.29 (95% CI: 1.14, 1.46) elevation in OR (odds ratio) of risk of abnormal baPWV. Moreover, each 1 SD increase in CDE was associated with a 0.74% (95% CI: 0.63%, 0.85%) increase in scores of ten-year ASCVD and a 1.91 (95% CI: 1.62, 2.26) increase in OR of risk of ten-year ASCVD. When compared with groups unexposed to coal mine dust, significant increase in the risk of arterial stiffness and ten-year ASCVD in the highest CDE groups were detected. CONCLUSION: The study suggested that cumulative exposure to coal mine dust was associated with elevated arterial stiffness and ten-year ASCVD risk in a dose-response manner. These findings contribute valuable insights for cardiovascular risk associated with coal mine dust.

Asunto(s)

RESUMEN

The main objective of this study is to thoroughly evaluate the diversity and sources of heavy metals in the school environment. Specifically, this study examines the presence of heavy metals in the dust found and collected from 24 schools in Vilnius. Employing hierarchical cluster analysis, principal component analysis, and positive matrix factorization, we identified combustion-related activities as primary contributors to elevated metal concentrations, notably zinc, scandium, and copper, with PM2.5/PM10 ratios indicating a combustion source. They reveal significant differences in the levels of elements such as arsenic (4.55-69.96 mg/kg), copper (51.28-395.37 mg/kg), zinc, and lead, which are affected by both local environmental factors and human activities. Elevated pollution levels were found in certain school environments, indicating environmental degradation. Pollution assessment and specific element pairings' strong positive correlations suggested shared origins or deposition processes. While this study primarily assesses non-carcinogenic risks to children based on a health risk assessment model, it acknowledges the well-documented carcinogenic potential of substances such as lead and arsenic. The research emphasizes the immediate necessity for efficient pollution management in educational environments, as indicated by the elevated hazard index for substances such as lead and arsenic, which present non-carcinogenic risks to children. This research offers important insights into the composition and origins of dust pollution in schools. It also promotes the need for broader geographic sampling and prolonged data collection to improve our understanding of pollution sources, alongside advocating for actionable strategies such as environmental management and policy reforms to effectively reduce exposure risks in educational settings. Furthermore, it aims to develop specific strategies to safeguard the health of students in Vilnius and similar urban areas.

RESUMEN

BACKGROUND: Exposure to dust in textile mills adversely affects workers' health. We collected epidemiological data on textile workers suffering from respiratory diseases and assessed work absence associated with illnesses in Faisalabad, Pakistan. METHODS: We recruited 206 workers using multistage sampling from 11 spinning mills in Faisalabad, Pakistan. The data were collected using 2-week health diaries and face-to-face interviews. The data pertains to socio-demographics, occupational exposures, the state of the workers' health, and other attributes. A theoretical framework of the health production function was used to estimate the relationship between cotton dust exposure and respiratory illnesses. We also estimated functional limitations (e.g., work absence) associated with dust exposure. STATA 12 was used to calculate descriptive statistics, an ordered probit for byssinosis, a probit model for chronic cough, and three complementary log-log models for blood phlegm, bronchitis, and asthma to measure dose-response functions. A Tobit model was used to measure the sickness absence function. RESULTS: We found that cotton dust exposure causes a significant health burden to workers, such as cough (35%), bronchitis (17%), and different grades of byssinosis symptoms (22%). The regression analysis showed that smoking cigarettes and working in dusty sections were the main determinants of respiratory diseases. Dusty work sections also cause illness-related work absences. However, the probability of work absence decreases with the increased use of face masks. CONCLUSION: The study's findings imply the significance of promoting occupational safety and health culture through training and awareness among workers or implementing the use of safety gadgets. Promulgating appropriate dust standards in textile mills is also a need of the hour.

RESUMEN

OBJECTIVES: Since the 1920s, Zambia's mining sector has experienced growth, which has increased the number of mine workers employed in the industry. Consequently, the potential for occupational exposure and prevalence of occupational diseases have also increased. Unfortunately, Zambia does not currently have legislative guidelines for workplace air monitoring and compliance. This study's objectives were to evaluate copper miners' personal exposure to respirable dust and respirable crystalline silica (RCS) and to assess workplace compliance using the European Standard for workplace air monitoring and measurement (EN689:2018). METHODS: This cross-sectional study collected 100 personal respirable dust exposure samples at a Zambian copper mine in 2023. These samples were weighed using NIOSH method 0600 and analyzed for crystalline silica using Fourier transform infrared spectroscopy (KBr pellet) (NIOSH method 7602). Additionally, 253 respirable dust exposure measurements collected at the mine between 2017 and 2022 were included for comparison. RESULTS: The median respirable dust exposure for the 2023 exposure measurements was 0.200 mg/m3 (95th percentile 2.871 mg/m3) compared to 0.400 mg/m3 (95th percentile 3.050 mg/m3) for the historic data. The median RCS exposure was 0.012 mg/m3 (95th percentile 0.163 mg/m3). Using EN689:2018, it was found that from 15 work areas, only six work areas complied with the standard for respirable dust exposure and only seven work areas complied with the standard for RCS exposure. CONCLUSIONS: At the mining site, several work areas had substantial exposure to respirable dust and RCS. Therefore, management needs to prioritize these areas when implementing control measures to reduce dust exposure. For the Zambia mining industry to manage exposure to respirable dust and RCS, it is necessary to implement standardized monitoring strategies. This study has demonstrated that EN689:2018 can be used successfully to determine compliance among Zambian mining work areas.

Asunto(s)

RESUMEN

BACKGROUND: Chronic obstructive pulmonary disease (COPD) represents a prevalent ailment, progressively surging within the ranks of coal mine laborers. The current study endeavors to elucidate the effects of dust exposure and smoking on COPD incidence amongst coal mine workers, while concurrently devising preventive strategies for this affliction. METHOD: A nested case-control study was conducted encompassing 1,416 participants aged ≥ 18 years, spanning the duration from (2017-2018) until 2020. A meticulous matching process yielded a cohort of 708 COPD patients, each paired with a control subject, forming a harmonious 1:1 ratio. Multiple logistic regression analysis was employed to scrutinize the associations between smoking, dust exposure with COPD among coal workers. RESULTS: The COPD prevalence within the cohort of coal workers under investigation amounted to 22.66%, with an accompanying incidence density of 0.09/person-year. Following meticulous adjustment for confounding variables, it was discerned that cumulative dust exposure within the range of 47.19 ~ (OR: 1.90, 95% CI: 1.05, 3.44), 101.27 ~ (OR: 1.99, 95% CI: 1.17, 3.39), as well as smoking indices of 72 ~ (OR: 1.85, 95% CI: 1.19, 2.88), 145 ~ (OR: 1.74, 95% CI: 1.17, 2.61), 310 ~ (OR: 1.85, 95% CI: 1.23, 2.77) engender an escalated vulnerability to COPD among coal workers. Furthermore, interaction analysis discerned an absence of both multiplicative and additive interactions between dust exposure, smoking, and COPD occurrence amidst coal workers. CONCLUSION: Dust exposure and smoking were unequivocally identified as precipitating risk factors for COPD incidence within the population of coal workers, albeit devoid of any discernible interaction between these two causal agents.

Asunto(s)

RESUMEN

Background: Silicosis is a progressive and irreversible disease primarily caused by exposure to crystalline silica dust and, to a lesser extent, cigarette smoking. However, further research is needed to validate the potential combined effect of these risk factors on the increased incidence of the disease. Methods: A total of 1688 male workers employed at a Chinese stone processing plant between 1 January 1999 and 31 December 2019, were included in the study. Cumulative exposure to industrial crystalline silica dust and packyears of smoking were collected through health surveillance, and odds ratios (ORs) with 95% confidence intervals (CIs) for silicotic changes due to industrial silica exposure and cigarette smoking were estimated using logistic regression models. Results: Among all participants, a significant exposure-response relationship was observed between long-term exposure to industrial silica dust and radiographic findings resembling silicosis (OR 1.74, 95% CI 1.25 to 2.41). However, among middle-aged workers, a weak and statistically insignificant relationship was found between prolonged cigarette smoking and X-ray evidence of lung silicosis (OR 1.59, 95% CI 1.00 to 2.53). Furthermore, significant combined effects, exceeding the additive models, were identified in each age group and employment sector (relative risk due to interaction 0.51, 95% CI 0.08 to 3.42). Conclusions: It is critically important to implement effective dust removal measures and tobacco control strategies in order to enhance respiratory health among employees across all age groups in the stone processing industry.

RESUMEN

The present report describes exposure to respirable silica and dust in the construction industry, as well as means to manage them. The average exposure in studied work tasks (n = 148) amounted to 64% of the Finnish OEL value of 0.05 mg/m3. While 10% of exposure estimates exceeded the OEL, the 60% percentile was well below 10% of the OEL, as was the median exposure. In other words, exposure was low in more than half of the tasks. Work tasks where exposure was low included construction cleaning, work management, installation of concrete elements, rebar laying, driving work machines equipped with cabin air intake filtration, and landscaping, in addition to some road construction tasks. Excessive exposure (>OEL) was related to not using respiratory protection at all or not using it for long enough after the dusty activity ceased. Excessive exposures were found in sandblasting, dismantling facade elements, diamond drilling, drilling hollow-core slabs, drilling with a drilling rig, priming of explosives, tiling, use of cabinless earthmoving machines, and jackhammering, regardless of whether the hammering took place in an underpressurized compartment or not. Even in these tasks, it was possible to perform the work safely, following good dust prevention measures and, when necessary, using respiratory protection suitable for the job. Furthermore, in all tasks with generally low exposure, one could be significantly exposed through the general air or by making poor choices in terms of dust control.

Asunto(s)

RESUMEN

Objective: In order to understand the dust concentration in the workplace of dust exposure enterprises in Shenxian. To evaluate the degree of occupational hazard factors of dust exposure enterprises. And provide basis for the formulation of occupational protection standards and management system of dust exposure enterprises. Methods: In February 2022, the dust concentration monitoring data of 89 dust exposure enterprises from 2017 to 2020 by the Shenxian Center for Disease Control and Prevention were collected, and the qualified rates of dust concentration detection of dust exposure enterprises in different years, dust types and enterprise sizes were analyzed. Results: A total of 89 dust enterprises were monitored from 2017 to 2020, 2132 dust samples were collected, and 1818 qualified samples were taken, with a total qualified rate of 85.3%. From 2017 to 2020, the dust detection qualified rates showed a year-by-year increase trend, 78.7% (447/568), 84.1% (471/560), 88.6% (418/472) and 90.6% (482/532), respectively, with statistically significant differences (χ(2)=36.27, P=0.003). The differences in the qualified rates of dust detection samples of silicon dust (66.1%, 41/62), grain dust (86.7%, 1549/1786), cotton dust (84.1%, 106/126) and wood dust (77.2%, 122/158) were statistically significant (χ(2)=29.66, P=0.002). The qualified rate of dust samples in large and medium-sized enterprises (95.1%, 1194/1256) was higher than that of small-sized enterprises (71.2%, 624/876), and the difference was statistically significant (χ(2)=1584.40, P=0.001) . Conclusion: The qualified rate of dust concentration monitoring results of dust exposure enterprises in Shenxian showed an increase trend year by year, while the pualified rate of dust concentration monitoring in small-sized enterprises was low, and the occupational hazard of silica dust was still severe.

Asunto(s)

RESUMEN

Introduction: To investigate the major existing occupational hazards and to assess the occupational health risks for ferrous metal foundries (FMFs) in Ningbo, China. Methods: Unified questionnaires were formulated to investigate the information on the basic situations, occupational hazards, and occupational health management for 193 FMFs in Ningbo. Furthermore, we used the semi-quantitative risk assessment model, which was developed by the International Council on Mining and Metals (ICMM), to assess occupational health risks for 59 of 193 the FMFs. Results: The casting process of FMFs in Ningbo was mainly divided into sand casting and investment casting, and silica-dust and noise were the major occupational hazards in both sand casting and investment casting foundries. Silica-dust mainly occurred in industries with such work as sand handling, modeling, falling sand, and sand cleaning, with the median of the permissible concentration-time weighted average (PC-TWA) was 0.80, 1.15, 3.52, 0.83 mg/m3, respectively. The noise mainly existed in industries with such work as sand handling, core making, falling sand, sand cleaning, cutting and grinding, and smelting with median of PC-TWA was 81.72 dB(A), 82.93 dB(A), 90.75 dB(A), 80.18 dB(A), 90.05 dB(A), 82.70 dB(A), respectively. In addition, the results of the ICMM assessment model indicated that 100 and 98.7% of the jobs exposed to silica-dust and noise in 59 FMFs have an "intolerable risk" level of risks of causing pneumoconiosis and noise deaf, respectively. Discussion: The hazard risk of silica-dust and noise is serious for FMFs in Ningbo. It is necessary to supervise enterprises to improve operating environmental conditions, accelerate the reduction of silica-dust and noise exposure risks, and promote the healthy and sustainable development of the foundry industry.

Asunto(s)

RESUMEN

BACKGROUND: Workers in pulp and paper factories are continuously exposed to paper dust. Excessive exposure to paper dust can cause respiratory disease. Information about the prevalence of chronic respiratory symptoms and dust exposure levels among workers in pulp and paper factories is not available in Ethiopia. The aim of this study was, therefore, to assess personal total dust exposure levels, the prevalence of chronic respiratory symptoms and their associated risk factors among workers in Ethiopian pulp and paper factories. METHODS: A comparative cross-sectional study was conducted. A total of 40 dust measurements were carried out on 20 randomly selected workers. To assess chronic respiratory symptoms and associated factors, 434 workers from two paper factories and controls were interviewed using a standard questionnaire adapted from the American Thoracic Society (ATS). Gravimetric analyses of the filters were undertaken using a standard microbalance. Poisson regression was performed for comparing the prevalence of symptoms and risk factors for the two groups. Multivariable analyses were conducted to identify factors associated with chronic respiratory symptoms. RESULT: The arithmetic mean (AM) and geometric mean (GM) of dust exposure levels among the paper factories workers were 11.3 (± 7.7) and 10.2 (± 1.4) mg/m3 respectively. This exposure level exceeded the threshold limit value recommended for total dust (10 mg/m3). The prevalence of having at least one chronic respiratory symptom was about 51% among the workers in paper factories. The prevalence ratio of having chronic respiratory symptoms among paper factory workers was 5.6 times higher (PR = 6, 95% CI 3.5-10.3) than in the controls. Chronic respiratory symptoms were significantly associated with factors such as an educational status of less than grade 9, being employed in the work sections of the factories, having work experience of 5 years and above, working more than 8 h per day and having a past history of occupation and respiratory illnesses. CONCLUSION: The dust concentration in the paper factories exceeded the acceptable recommended limit value of 10 mg/m3. The prevalence of chronic respiratory symptoms among paper factory workers was higher than among controls. The main determining factors for chronic respiratory symptoms among the workers were the specific work section such as production section, low income, having past history of respiratory illnesses, the number of years of working and low educational status. This finding indicated the need for improving the working conditions in paper factories in Ethiopia.

Asunto(s)

RESUMEN

BACKGROUND: Paddy milling is the oldest and largest agro-processing industry in India. A large number of workers are employed in the rice mills where they are potentially exposed to dust. It has been shown that exposure to dust results in a high prevalence of respiratory diseases, such as asthma, chronic bronchitis, extrinsic allergic alveoli ties, toxic syndrome, and interstitial lung disease. OBJECTIVE: The aim of this study was to investigate the effect of dust on rice mill workers' health using lung function tests with comparison to an unexposed population. PARTICIPANTS: Two hundred eighteen rice mill workers (exposed volunteers) were randomly selected from 25 rice mills in Assam, India. Participants were 18-60 years with at least one year of work experience. Further, 377 volunteers who were not exposed to dust and having similar demographic characteristics also participated as a control group. METHOD: Pulmonary function tests were conducted for all participants by spirometry. The tests included forced vital capacity (FVC), forced expiratory volume in one second (FEV1), FEV1/FVC (%), peak expiratory flow (PEF) and forced expiratory flow during the middle half of a forced vital capacity (FEF25-75%). Values from exposed workers were compared with the unexposed volunteers. RESULTS: It was observed that the lung function parameters FVC, FEV1, PEF and FEF25-75% in exposed workers were significantly decreased compared with unexposed volunteers. There were also significantly decreased FVC, FEV1, FEV1/FVC%, PEF and FEF25-75% with increase in age and duration of dust exposure. It was further observed that 48% and 32% of the total male and female volunteers, respectively, had evidence of lung disease. Irrespective of gender, approximately 45% of mill workers had evidence of lung disease, of which 21% was restrictive and 24% was obstructive. CONCLUSION: Compared with unexposed controls, rice mill workers have a greater prevalence of respiratory disease based on pulmonary function tests.

Asunto(s)

RESUMEN

In order to study the dust exposure amount and coal dust deposition rule of coal miners under different labor intensity in coal mine environment, an airflow-particle two-phase coupling calculation model of human upper respiratory tract was established based on Euler-Lagrange framework, and the airflow field in the upper respiratory tract and the characteristics of coal dust deposition were simulated and studied. By comparing the experimental data, the relative error of simulation is in the range of 1.5 %-11.2 %. The results showed that the total deposition fraction of 1 µm dust was the smallest (0.61-1.20 %), and was relatively less affected by respiratory intensity, and the overall distribution was uniform. When the dust particle size increased to 7.07 µm, the total dust deposition fraction in the nasal cavity, pharynx and larynx was in the range of 11.10 %-20.91 %, and increased with the respiratory intensity. When the dust particle size was large, the dust particles of 20 µm and 80 µm were mostly concentrated in the front of the nasal cavity, and the deposition amount of 80 µm dust was about 99.52 %. It was found that with the increase of dust particle size or the increase of labor intensity, the possibility of dust being transported into lungs became smaller. The fitting function of 7.07 µm dust escape rate and labor intensity was obtained, for example, Y7.07µm = 91.73-0.22n (n is labor intensity), and the escape rate of dust with 7.07 µm particle size was up to 88.90 %. Most of them escape from the upper respiratory tract and enter the lungs, which provides theoretical guidance for quantifying the accumulated dust exposure amount in the lungs and monitoring respiratory dust concentration.

Asunto(s)

RESUMEN

Heavy metals exposure through dust emissions pose a health risk to workers in coal and chromite mines. The processes involved in mining are noteworthy for the generation of heavy metal-contaminated dust which causes human health implications, especially to the workers that are mainly exposed to such toxins. This study determined pollution levels in coal and chromite mines and calculated the health risk of workers being exposed to heavy metal-contaminated dust. We used fractioned dust with particle sizes < 75, 75-106, and 107-150 µm to assess the pollution levels, anthropogenic impacts, geo-accumulation index, and enrichment factor for selected coal and chromite mines. Through a probabilistic approach, Monte Carlo simulations were used to determine health risks. The findings revealed that the smallest size dust fraction (< 75 µm) contained the highest metal concentrations. Ingestion was considered a prominent exposure route contributing to health risk. In the dust fraction (< 75 µm), chromite mines exhibited the highest Cr (340.6 mg/kg) and lowest Cd (8.4 mg/kg) concentrations. In coal mines, Mn (284.9 mg/kg) and Cd (2.1 mg/kg) were measured highest and lowest, respectively. Pollution assessment revealed dust to be moderately polluted. Health risk assessment showed that Cr in chromite mines exhibited a mean HI value of 1.16E + 00 that was higher than the safe level (HI > 1) having the potential to cause significant health risk to workers. In coal mines, the estimated total HI was 6E-1. Sensitivity analysis revealed concentration and exposure time to be the most influential parameters contributing to risk. Therefore, governmental and nongovernmental organizations must develop dust pollution control guidelines and mitigation measures to safeguard the health of mineworkers by limiting heavy metal exposure.

Asunto(s)

RESUMEN

Hexabromocyclododecane (HBCD) is a brominated flame retardant (BFR) labeled by the Stockholm Convention as a persistent organic pollutant (POP) and exists primarily as three stereoisomers, i.e. α-, ß-, and γ. One of the major routes of human exposure to HBCD is dust found in homes, offices, and cars and dust may be the most important route of HBCD exposure in young children. A study was conducted to determine the oral bioavailability of HBCD from household dust in rats over a 21-d feeding period relative to HBCD bioavailability from a corn oil matrix. Twenty-four hours after the last exposure, rats were sacrificed, and various tissues were collected. HBCD diastereomers were detected in adipose, blood, and liver of both dose groups, suggesting HBCD is bioavailable from both oil and dust. ß-HBCD concentrations were below the limit of detection in all tissues, but α-HBCD was detected in the brain of oil-dose rats and in adipose and liver of both dose groups. γ-HBCD was the dominant diastereomer in adipose, blood, and liver samples regardless of dosing matrix. Except for γ-HBCD in muscle of the oil-dosed group, muscle did not contain measurable HBCDs. Adipose tissue accumulated HBCD to a greater extent than muscle or liver, having bioaccumulation factors greater than 1.

Asunto(s)

RESUMEN

Objective: In order to understand the dust concentration in the workplace of dust exposure enterprises in Shenxian. To evaluate the degree of occupational hazard factors of dust exposure enterprises. And provide basis for the formulation of occupational protection standards and management system of dust exposure enterprises. Methods: In February 2022, the dust concentration monitoring data of 89 dust exposure enterprises from 2017 to 2020 by the Shenxian Center for Disease Control and Prevention were collected, and the qualified rates of dust concentration detection of dust exposure enterprises in different years, dust types and enterprise sizes were analyzed. Results: A total of 89 dust enterprises were monitored from 2017 to 2020, 2132 dust samples were collected, and 1818 qualified samples were taken, with a total qualified rate of 85.3%. From 2017 to 2020, the dust detection qualified rates showed a year-by-year increase trend, 78.7% (447/568), 84.1% (471/560), 88.6% (418/472) and 90.6% (482/532), respectively, with statistically significant differences (χ(2)=36.27, P=0.003). The differences in the qualified rates of dust detection samples of silicon dust (66.1%, 41/62), grain dust (86.7%, 1549/1786), cotton dust (84.1%, 106/126) and wood dust (77.2%, 122/158) were statistically significant (χ(2)=29.66, P=0.002). The qualified rate of dust samples in large and medium-sized enterprises (95.1%, 1194/1256) was higher than that of small-sized enterprises (71.2%, 624/876), and the difference was statistically significant (χ(2)=1584.40, P=0.001) . Conclusion: The qualified rate of dust concentration monitoring results of dust exposure enterprises in Shenxian showed an increase trend year by year, while the pualified rate of dust concentration monitoring in small-sized enterprises was low, and the occupational hazard of silica dust was still severe.

Asunto(s)