RESUMEN

Emulsion fortified with ß-carotene was added to corn fiber gum (CFG)/soy protein isolate (SPI) double network gel matrix to obtain emulsion-filled gels (EFG) via dual induction of laccase and glucono-δ-lactone. Protein digestion was accompanied by the release of ß-carotene from gel matrix during in vitro digestion. The surfactant types and corn fiber gum/soy protein isolate ratio affected the ß-carotene bioaccessibility via changing oil-water interfacial composition and emulsion particle size during in vitro digestion. As compared with Tween-20 EFGs, emulsion droplets released from SPI EFGs was more susceptible to flocculation, followed with coalescence due to proteolysis of interfacial SPI during gastric digestion. The resulting oil droplets with large particle size exhibited lower lipase adsorption, thus reducing the free fatty acid content and ß-carotene bioaccessibility. The confocal laser scanning microscope (CLSM) observation confirmed that protein hydrolysate from gel matrix were adsorbed onto the oil-water interface competing with Tween-20 during intestinal digestion. For EFGs with higher CFG content, steric hindrance of CFG molecules and less emulsion release could inhibit droplet flocculation, thus enhancing ß-carotene bioaccessibility.

RESUMEN

Gel electrolytes hold promise for stabilizing zinc-ion batteries (ZIBs), but achieving both high ionic conductivity and strong mechanical properties remains challenging. This work presents a double network gel electrolyte based on poly(N-hydroxymethyl acrylamide) (PNMA) and sodium alginate (SA), overcoming this trade-off. The PNMA network provides mechanical strength and water retention, while the SA network facilitates rapid zinc-ion (Zn2+) diffusion through tailored solvation. This double network gel exhibits a tensile strength of up to 838 kPa, significantly higher than previous reports. The SA network provides ion channels for rapid transport of hydrated Zn2+, enhancing the ionic conductivity to a ground-breaking 33.1 mS cm-1. This value is even higher than the liquid electrolytes. The growth of Zn dendrites is also suppressed due to the mechanical constraint and rapid ion conduction. In symmetrical cells, the PNMA/SA gel demonstrates exceptional cycling stability (>2000 h). Characterizations show this is because of reduced free water amount, hindering cathode material dissolution. The full cells with sodium vanadate cathode manifest a high capacity (364.8 mA h g-1 at 0.5 A g-1) and excellent capacity retention (83% after 2500 cycles at 10 A g-1). This double network design offers a way to achieve high-performance and stable ZIBs.

RESUMEN

Applying conductive hydrogels in electronic skin, health monitoring, and wearable devices has aroused great research interest. Yet, it remains a significant challenge to prepare conductive hydrogels simultaneously with superior mechanical, self-recovery, and conductivity performance. Herein, a dual ionically cross-linked double network (DN) hydrogel is fabricated based on K+ and Fe3+ ion cross-linked κ-carrageenan (κ-CG) and Fe3+ ion cross-linked poly(sodium acrylate-co-acrylamide) P(AANa-co-AM). Benefiting from the abundance of hydrogen bonds and metal coordination bonds, the conductive hydrogel has excellent mechanical properties (fracture strain up to 1420 %, fracture stress up to 2.30 MPa, and toughness up to 20.63 MJ/m3) and good self-recovery performance (the recovery rate of the toughness can reach 85 % after waiting for 1 h). Meanwhile, due to the introduction of dual metal ions of K+ and Fe3+, the ionic conductivity of conductive hydrogel is up to 1.42 S/m. Furthermore, the hydrogel strain sensor has good sensitivity with a gauge factor (GF) of 2.41 (0-100 %). It can be a wearable sensor that monitors different human motions, such as sit-ups. This work offers a new synergistic strategy for designing a hydrogel strain sensor with high mechanical, self-recovery, and conductive properties.

RESUMEN

Soil heavy metal removal strategies are increasingly valued for effectively reducing contamination and preventing secondary pollution. In this work, a double network hydrogel (Fe2O3@LH), consisting of lignosulfonate (LS) and polyacrylamide with embedded Fe2O3 nanoparticles, was synthesized successfully via a one-pot method and subsequently applied to adsorb lead (Pb) from contaminated soil. Incorporating Fe2O3 into the hydrogel enhances the adsorption capacity of Fe2O3@LH for Pb(II). The Fe2O3@LH hydrogel demonstrates a maximum Pb(II) adsorption capacity of 143.11 mg g-1, with Pb(II) removal mechanisms involving electrostatic adsorption, cation exchange, precipitation reactions, and the formation of coordination complexes, achieving a 22.3 % maximum removal efficiency in soil cultivation experiments. Additionally, the application of Fe2O3@LH markedly reduces the concentrations of cadmium (Cd) and arsenic (As) in the soil, meanwhile enhances the levels of total nitrogen (TN), soil organic matter (SOM), and cation exchange capacity (CEC) by 23.1 %, 10.6 %, and 16.9 %, respectively. Following 90 days of continuous application in the soil, the recovery rate of Fe2O3@LH remains above 75 %. The toxicity assay using zebrafish larvae indicates that Fe2O3@LH demonstrates good biosafety. This study demonstrates the considerable potential of Fe2O3@LH hydrogel for practical application in reducing Pb(II) levels in contaminated soil.

RESUMEN

In response to prevailing challenges encountered in electrical applications, including insufficient mechanical strength, subpar tensile properties, and limited adaptability to dynamic motion environments, we engineered a pioneering hydrogel adhesive. Simultaneously, we presented a novel interpretation of the application of ZnO in hydrogels. Our innovative approach entailed the intertwining of polyvinyl alcohol (PVA) and flexible sodium alginate (SA) double networks (DN) through cross-linking mechanisms, resulting in the formation of a hydrogen-bonding pinned DN hydrogel. This groundbreaking design substantially amplified the cohesive and adhesive properties of the hydrogel, while the incorporation of zinc oxide (ZnO) through modification served to enhance its electrical conductivity. Our hydrogel sensor demonstrated exceptional capabilities in monitoring human motion, adeptly meeting the demands of diverse motion scenarios. Furthermore, meticulous consideration had been given to the influence of perspiration on sensor performance, rendering our sensor exceptionally well-suited for real-world applications.

RESUMEN

Injectable hydrogels have been extensively used as promising therapeutic scaffolds for a wide range of biomedical applications, such as tissue regeneration and drug delivery. However, their low fracture toughness and brittleness often limit their scope of application. Double-network (DN) hydrogel, which is composed of independently cross-linked rigid and ductile polymer networks, has been proposed as an alternative technique to compensate for the weak mechanical properties of hydrogels. Nevertheless, some challenges still remain, such as the complicated and time-consuming process for DN formation, and the difficulty in controlling the mechanical properties of DN hydrogels. In this study, we introduce a simple, rapid, and controllable method to prepare in situ cross-linkable injectable DN hydrogels composed of acrylamide (AAm) and 4-arm-PPO-PEO-tyramine (TTA) via dual Fenton- and enzyme-mediated reactions. By varying the concentration of Fenton's reagent, the DN hydrogels were rapidly formed with controllable gelation rate. Importantly, the DN hydrogels showed a 13-fold increase in compressive strength and a 14-fold increase in tensile strength, compared to the single network hydrogels. The mechanical properties, elasticity, and plasticity of DN hydrogels could also be modulated by simply varying the preparation conditions, including the cross-linking density and reagent concentrations. At low cross-linker concentration (<0.05 wt %), the plastic DN hydrogel stretched to over 6,500%, whereas high cross-linker concentration (≥0.05 wt %) induced fully elastic hydrogels, without hysteresis. Besides, DN hydrogels were endowed with rapid self-recovery and highly enhanced adhesion, which can be further applied to wearable devices. Moreover, human dermal fibroblasts treated with DN hydrogels retained viability, demonstrating the biocompatibility of the cross-linking system. Therefore, we expect that the dual Fenton-/enzyme-mediated cross-linkable DN hydrogels offer great potential as advanced biomaterials applied for hard tissue regeneration and replacement.

Asunto(s)

RESUMEN

Trauma or repeated damage to joints can result in focal cartilage defects, significantly elevating the risk of osteoarthritis. Damaged cartilage has an inherently limited self-healing capacity and remains an urgent unmet clinical need. Consequently, there is growing interest in biodegradable hydrogels as potential scaffolds for the repair or reconstruction of cartilage defects. Here, we developed a biodegradable and macroporous hybrid double-network (DN) cryogel by combining two independently cross-linked networks of multiarm polyethylene glycol (PEG) acrylate and alginate.Hybrid DN cryogels are formed using highly biocompatible click reactions for the PEG network and ionic bonding for the alginate network. By judicious selection of various structurally similar cross-linkers to form the PEG network, we can generate hybrid DN cryogels with customizable degradation kinetics. The resulting PEG-alginate hybrid DN cryogels have an interconnected macroporous structure, high mechanical strength, and rapid swelling kinetics. The interconnected macropores in the cryogels support efficient mesenchymal stem cell infiltration at a high density. Finally, we demonstrate that PEG-alginate hybrid DN cryogels allow sustained release of chondrogenic growth factors and support chondrogenic differentiation of mouse mesenchymal stem cells. This study provides a novel method to generate macroporous hybrid DN cryogels with customizable degradation rates and a potential scaffold for cartilage tissue engineering.

Asunto(s)

RESUMEN

There are enormous economic benefits to conveniently increasing the selective recovery capacity of gold. Fe/Co-MOF@PDA/NdFeB double-network organogel (Fe/Co-MOF@PDA NH) is synthesized by aggregation assembly strategy. The package of PDA provides a large number of nitrogen-containing functional groups that can serve as adsorption sites for gold ions, resulting in a 21.8% increase in the ability of the material to recover gold. Fe/Co-MOF@PDA NH possesses high gold recovery capacity (1478.87 mg g-1) and excellent gold selectivity (Kd = 5.71 mL g-1). With the assistance of an in situ magnetic field, the gold recovery capacity of Fe/Co-MOF@PDA NH is increased from 1217.93 to 1478.87 mg g-1, and the recovery rate increased by 24.7%. The above excellent performance is attributed to the efficient reduction of gold by FDC/FC+, Co2+/Co3+ double reducing couple, and the optimization of the reduction reaction by the magnetic field. After the samples are calcined, high-purity gold (95.6%, 22K gold) is recovered by magnetic separation. This study proposes a forward-looking in situ energy field-assisted strategy to enhance precious metal recovery, which has a guiding role in the development of low-carbon industries.

RESUMEN

Polysaccharide-based hydrogels are suitable for use in the field of flexible bioelectronics due to their benign mechanical properties and biocompatibility. However, the preparation of hydrogel sensors with high performance without affecting their physicochemical properties (e.g., flexibility, toughness, self-healing, and antibacterial activity) remains a challenge and needs to be solved. Herein, a metal ion cross-linking reinforced, double network hydrogel was formed from a 2-acrylamide-2-methylpropanesulfonic acid (AMPS) copolymer interpenetrating κ-carrageenan (CAR), followed by immersing the gel in a Cu2+ ion solution to obtain an antibacterial CAR/P(AM-co-AMPS)-Cu2+ conductive hydrogel. LiCl was added as the electrolyte. The presence of the LiCl electrolyte and sulfonated molecular chain units not only gives the hydrogel good electrical conductivity (conductivity up to 2.68 S/m) but also improves the sensitivity of the hydrogel as a stress-strain sensor, with a hydrogel sensitivity GF of up to 3.76 in the 20%-100% strain range and response time of up to 280 ms. The CAR double-helical structure and sol-gel properties and the interaction of multiple noncovalent bonds between polymers provide the hydrogel with excellent self-healing, with a self-healing efficiency of 68%. In addition, the electrostatic interaction of Cu2+ with Escherichia coli cells can inhibit their growth, exhibiting good antibacterial properties with an inhibition circle diameter of 20.5 mm. This work could provide an effective strategy for antibacterial multifunctional CAR-based bionic sensors.

Asunto(s)

RESUMEN

Conductive hydrogels with excellent mechanical properties, a broad detection range, and stability in complex environments have remained a significant challenge for the development of flexible sensors. In this study, a straightforward freeze-thaw cycles strategy was developed to fabricate a polyvinyl alcohol (PVA)/carrageenan (CA)/calcium chloride (CaCl2)/MXene-based double network organohydrogel (PCCME) for highly flexible and responsive strain detection across a broad temperature spectrum. The PCCME organohydrogel features multiple interactive forces including hydrogen bonding, ionic interactions, and microphase crystallization, which contribute to the organohydrogel's exceptional mechanical and electrical performance. The PCCME organohydrogel exhibited excellent performance in a load-unload test repeated 100 times after being maintained at room temperature for 7 days, with a minimal mechanical decay of only 2.6%. Furthermore, the repaired PCCME organohydrogel retained its robust stability after storage at low temperatures followed by placement at room temperature. The organohydrogel sensor not only detects various movement amplitudes of the human body but also recognizes arrays of pressure signals and converts these into digital images, highlighting its significant potential for applications in rehabilitation monitoring, pressure sensing, and human-computer interaction.

RESUMEN

Hydrogels have been widely used in the biomedical field, including wearable sensors and biological adhesives. However, achieving a balance between various functionalities, such as wet adhesion, stable conductivity, and biocompatibility, in one customized hydrogel has been a challenging issue. In this study, we developed a multifunctional hydrogel comprising recombinant human collagen (RHC) and aldehyde-modified sodium alginate (Ald-alginate), which was primarily crosslinked through a Schiff-base reaction and metal chelation. Due to the combination of a dynamic covalent crosslinking network (imine linkage between RHC and Ald-alginate) and a dynamic ionic crosslinking network (ionic bonding between Ca2+ and Ald-alginate), the hydrogel exhibited excellent self-healing and injectable behaviors. Benefiting from the high Ca2+ content, the hydrogel also attained antifreezing and conductivity properties. In addition to its excellent conductivity and biocompatibility, the hydrogel exhibited strong wet tissue adhesion ability and could adhere rapidly and strongly to the surfaces of various objects or biological tissues, forming a good sealing environment. Moreover, the hydrogel could be directly adhered to a tissue surface as a flexible sensor to accurately detect physiological signals. The versatility of this multifunctional hydrogel will open new avenues for biomedical applications, such as bioadhesives and biosensing.

Asunto(s)

RESUMEN

Fibers of liquid crystal elastomers (LCEs) as promising artificial muscle show ultralarge and reversible contractile strokes. However, the contractile force is limited by the poor mechanical properties of the LCE fibers. Herein, we report high-strength LCE fibers by introducing a secondary network into the single-network LCE. The double-network LCE (DNLCE) shows considerable improvements in tensile strength (313.9%) and maximum actuation stress (342.8%) compared to pristine LCE. To facilitate the controllability and application, a coiled artificial muscle fiber consisting of DNLCE-coated carbon nanotube (CNT) fiber is prepared. When electrothermally driven, the artificial muscle fiber outputs a high actuation performance and programmable actuation. Furthermore, by knitting the artificial muscle fibers into origami structures, an intelligent gripper and crawling inchworm robot have been demonstrated. These demonstrations provide promising application scenarios for advanced intelligent systems in the future.

RESUMEN

Hydrogels, composed of hydrophilic homopolymer or copolymer networks, have structures similar to natural living tissues, making them ideal for applications in drug delivery, tissue engineering, and biosensors. Since Wichterle and Lim first synthesized hydrogels in 1960, extensive research has led to various types with unique features. Responsive hydrogels, which undergo reversible structural changes when exposed to stimuli like temperature, pH, or specific molecules, are particularly promising. Temperature-sensitive hydrogels, which mimic biological processes, are the most studied, with poly(N-isopropylacrylamide) (PNIPAm) being prominent due to its lower critical solution temperature of around 32 °C. Additionally, pH-responsive hydrogels, composed of polyelectrolytes, change their structure in response to pH variations. Despite their potential, conventional hydrogels often lack mechanical strength. The double-network (DN) hydrogel approach, introduced by Gong in 2003, significantly enhanced mechanical properties, leading to innovations like shape-deformable DN hydrogels, organic/inorganic composites, and flexible display devices. These advancements highlight the potential of hydrogels in diverse fields requiring precise and adaptable material performance. In this review, we focus on advancements in the field of responsive acrylamide-based hydrogels with IPN structures, emphasizing the recent research on DN hydrogels.

RESUMEN

Alginate and gellan gum have both been used by researchers as reinforcing networks to create tough and biocompatible polyethylene glycol (PEG) based double network (DN) hydrogels; however, the relative advantages and disadvantages of each approach are not understood. This study directly compares the mechanical and biological properties of polyethylene glycol di-methacrylate (PEGDMA) hybrid DN hydrogels reinforced with either gellan gum or sodium alginate using PEGDMA concentrations from 10 to 20 wt% and reinforcing network concentrations of 1 and 2 wt%. The findings demonstrate that gellan gum reinforcement is more effective at increasing the strength, stiffness, and toughness of PEGDMA DN hydrogels. In contrast, alginate reinforcement yields DN hydrogels with greater stretchability compared to gellan gum reinforced PEGDMA. Furthermore, separate measurements of toughness via unnotched work of rupture testing and notched fracture toughness testing showed a strong correlation of these two properties for a single reinforcing network type, but not across the two types of reinforcing networks. This suggests that additional notched fracture toughness experiments are important for understanding the full mechanical response when comparing different tough DN hydrogel systems. Regarding the biological response, after conjugation of matrix protein to the surface of both materials robust cell attachment and spreading was supported with higher yes associated protein (YAP) nuclear expression observed in populations adhering to the stiffer gellan gum-PEGDMA material. This study provides valuable insights regarding how to design double network hydrogels for specific property requirements, e.g., for use in biomedical devices, as scaffolding for tissue engineering, or in soft robotic applications.

Asunto(s)

RESUMEN

Hydrogels are extensively explored as biomaterials for tissue scaffolds, and their controlled fabrication has been the subject of wide investigation. However, the tedious mechanical property adjusting process through formula control hindered their application for diverse tissue scaffolds. To overcome this limitation, we proposed a two-step process to realize simple adjustment of mechanical modulus over a broad range, by combining digital light processing (DLP) and post-processing steps. UV-curable hydrogels (polyacrylamide-alginate) are 3D printed via DLP, with the ability to create complex 3D patterns. Subsequent post-processing with Fe3+ ions bath induces secondary crosslinking of hydrogel scaffolds, tuning the modulus as required through soaking in solutions with different Fe3+ concentrations. This innovative two-step process offers high-precision (10 µm) and broad modulus adjusting capability (15.8-345 kPa), covering a broad range of tissues in the human body. As a practical demonstration, hydrogel scaffolds with tissue-mimicking patterns were printed for cultivating cardiac tissue and vascular scaffolds, which can effectively support tissue growth and induce tissue morphologies.

Asunto(s)

RESUMEN

In recent years, hydrogel-based flexible sensors have garnered increasing attention in research. Ionic hydrogels, enriched with large amounts of ionic liquids, exhibit electrical conductivity, excellent electrochemical stability, anti-freezing, and antimicrobial properties. However, most ionic hydrogels suffer from poor mechanical properties, limiting their adaptability to more complex application scenarios. Integrating conductive polymers into hydrogels leads to desirable features such as increased specific surface area, soft and biocompatible interfaces, and high electrolyte permeability. In this study, we successfully prepared Fe3+/Ap@PVA/PEDOT double-network hydrogel. Utilizing polyvinyl alcohol (PVA) as the primary matrix, we introduced PEDOT:PSS and FeCl3 to confer conductivity to the hydrogel. The incorporation of amylopectin (Ap) further enhanced mechanical performance. The resulted hydrogel sensor exhibits outstanding mechanical properties, allowing for stretching up to 347 % and withstanding a tensile force of 505 kPa. In addition, it exhibits excellent antifreeze properties (can work at -30 °C), healability, water retention, and high sensitivity to stretching (GF = 4.72 at a 200 % strain ratio), compression (GF = 2.97 at a 12 % compressive ratio), and temperature (TCR = 2.46). These remarkable properties of the hydrogel make it possible in applications such as human motion monitoring, handwriting recognition, and temperature sensing.

RESUMEN

It has been demonstrated that ferulic acid (FA) can be effectively encapsulated using wheat gluten amyloid fibrils (AF) and chitosan (CS) in a double network hydrogel (DN) form, with cross-linking mediated by Genipin (GP). Within this system, the DN comprising gluten AF-FA and CS-FA exhibited optimal loading metrics at a formulation designated as DN8, achieving a load efficiency of 88.5 % and a load capacity of 0.78 %. Analysis through fluorescence quenching confirmed that DN8 harbored the highest quantity of FA. Fourier-transform infrared spectroscopy (FTIR) further verified a significant increase in ß-sheet content post-hydrogel formation, enhancing the binding capacity for FA. Rheological assessments indicated a transition from solution to gel, delineating the phase state of the DN. Comprehensive in vitro digestion studies revealed that DN8 provided superior sustained release properties, exhibited the highest total antioxidant capacity, and displayed potent inhibitory activities against angiotensin I converting enzyme (ACE) and acetylcholinesterase (Ach-E). Additionally, the DN significantly bolstered the stability of FA against photothermal degradation. Collectively, these findings lay foundational insights for the advancement of the wheat gluten AF-based delivery system for bioactive compounds and provided a theoretical basis for the development of functional foods.

Asunto(s)

RESUMEN

Mechanochromic functionality realized via the force-responsive mechanophores in polymers has great potential for damage sensing and information storage. Mechanophores with the ability to recognize multiple stimuli for tunable chromic characteristics are highly sought after for versatile sensing ability and color programmability. Nevertheless, the majority of mechanophores are based on single-component chromophores with limited sensitivity, or require additional fabrication technology for multi-modal chromism. Here, we report a novel multifunctional mechanophore capable of vividly detectable and tunable mechanochromism in polymers. This synergistic optical coupling relies on strategically fusing rhodamine and spiropyran (Rh-SP), and tethering polymer chains on both subunits. The mechanochromic behaviors of the Rh-SP-linked polymers under sonication and compression are thoroughly evaluated in response to changes in force and the light-controlled relaxation process. Non-sequential ring-opening of the two subunits under force is identified, endowing high-contrast mechanochromism. Light-induced differential ring-closing reactions of the two subunits, together with the acidichromism of the SP moiety, are employed to engineer elastomers with programmable and wide-spectrum colors. Our work presents an effective strategy for highly appreciable and regulable mechanochromic functionality, and also provides new insights into the rupture mechanisms of π-fused mechanophores, as well as how the stimuli history controls stress accumulation in polymers.

RESUMEN

The design and construction of high strength hydrogels is a widely discussed topic in hydrogel research. In this study, we combined three toughening strategies, including dual network, oriented structure construction and nanophase doping, to develop an alginate/polyacrylamide (PAM)/modified titanium dioxide fiber (TiO2 NF@PAM) dual network composite hydrogel prepared via syringe. The effects of different preparation methods, AM/Alginate ratios, inorganic doping phases and TiO2 NF@PAM/AM ratios on the mechanical properties of composite hydrogels were investigated. The study found that the alginate hydrogel prepared by syringe exhibited superior axial orientation and achieved a tensile strength of (1091 ± 46) kPa. And the composite hydrogel doped with 0.2 wt% TiO2 NF@PAM had a tensile strength of (1006 ± 64) kPa, which was higher than that of the composite hydrogel doped with 0.2 wt% TiO2 nanoparticles (976 ± 66) kPa. The highest tensile strength (1120 ± 67) kPa and elongation at break (182 ± 8) % were achieved when the ratio of TiO2 NF@PAM/AM was 0.6 wt%. The force applied to the gel solution in the syringe affects the orientation of the polymer chains and TiO2 NF@PAM within the gel, which subsequently impacts the mechanical properties of the hydrogel. Therefore, we further investigated the mechanical properties of composite hydrogels under varying propulsion speeds, syringe diameters, and syringe lengths. It was observed that the gel solution's shear strength increased as the syringe diameter decreased. The resulting composite hydrogels were better oriented and had improved mechanical properties. The composite hydrogels' tensile strength peaked at (1117 ± 47) kPa when the syringe advance rate was between 1-7 mL/min. The mechanical properties of the hydrogels were optimal when the syringe length was 30 mm, with a maximum tensile strength of (1131 ± 67) kPa and a tensile ratio of (166 ± 5) %. This study demonstrates the viability of integrating three distinct strengthening methodologies to generate hydrogels of considerable strength. Furthermore, the Alginate/PAM/TiO2 NF@PAM composite hydrogels possess remarkable potential as adaptable, wearable sensors due to their exemplary mechanical properties, knittability, and conductivity.

RESUMEN

A superabsorbent hydrogel was prepared by the free-radical copolymerization of natural rubber (NR) latex with poly(acrylic acid) (PAA) at NR loadings up to 50 wt%. An NR/PAA hydrogel containing 40 wt% of NR (NR-40) had a water absorption capacity of 214 g/g (21,400 %) of its dry weight. The compressive modulus increased 512 % and sample integrity was improved due to the physical entanglement of NR chains. NR-40 hydrogel removed 97 % of methylene blue (MB) from the aqueous solution in 1 h (at initial concentrations of 10-1000 mg/L) and produced a maximum removal of 1191 mg MB/g of hydrogel at an initial MB concentration of 4500 mg/L. The adsorption of MB was an endothermic process. Fourier transform infrared spectroscopy indicated that hydrogen bonding and electrostatic interaction drove the process. After the in-situ incorporation of ZnO into NR-40, absorbed energy from sunlight generated active species that could photocatalytically degrade adsorbed MB in the hydrogel matrix. The scavenger tests indicated that superoxide radical anions and hydroxyl radicals were the main species for this process. The hydrogel composite material showed good stability and could be regenerated and reused over 10 cycles, degrading >80 % of the adsorbed dye. This novel natural-based hydrogel provides double functions of adsorption and photodegradation of toxic dyes without the requirement of chemicals and a separation process.

Asunto(s)