RESUMEN

Advancements in 3D printing technology are providing a new direction in pediatric dentistry by offering innovative solutions to traditional challenges. The remarkable expansion of 3D printing necessitates a comprehensive examination of its status and applications in the dental field, particularly in the pediatric dentistry. This review provides a comprehensive exploration of the applications of 3D printing in pediatric dental practices by drawing from a systematic search across databases, including PubMed/MEDLINE, Scopus, Web of Science, Scielo and the Cochrane Library. The search strategy employed a combination of keywords: "Digital dentistry and 3D printing", "3D printing technology in dentistry", "3D printing in pediatric dentistry" and "3D printing in pediatric dental procedures". The review encompasses a wide array of studies, including original research, cross-sectional analyses, case reports and reviews. A detailed overview is presented in regard to the use of 3D printing for master and educational models, space maintainers, prosthetic restorations, surgical guide, splint design and fracture treatment, fluoride application, autogenous dental transplantation, anterior teeth restoration, and pediatric endodontics and regenerative treatments. This review shows that 3D printing improves clinical outcomes through personalized and precise treatment options and enhances dental students' educational landscape. Areas lacking extensive research were also identified, which warrent further investigation to optimize the integration of 3D printing in pediatric dentistry. By mapping out the current landscape and future directions, the aim of this paper is to support pediatric dentists in recognizing the broad implications of 3D printing for improving patient care and advancing dental education.

Asunto(s)

RESUMEN

OBJECTIVE: This article aims to describe a systematic method for tooth color reproduction with ceramics restorations employing artificial intelligence (AI) software named Matisse. It provides a comprehensive analysis of the entire process, beginning with shade-taking and extending to ceramic application in a complex clinical case in the anterior region-specifically, a single central restoration supported by an implant. CLINICAL CONSIDERATIONS: The clinical case presented highlights the potential of Matisse software for generating ceramic (inSync-Jensen Dental, USA) and staining (Miyo-Jensen Dental, USA) recipes over a zirconia abutment (Katana-Noritake Dental, Japan). This approach achieves an optimal single central restoration utilizing CAD-CAM and layering techniques. CONCLUSIONS: The systematic method employing the Matisse software achieved accurate color reproduction for a single central restoration supported by an implant. This result was achieved by the dental ceramist within the first attempt and without seeing the patient in the entire process. CLINICAL SIGNIFICANCE: The Matisse AI-assisted protocol offers a systematic and scientifically grounded method for color reproduction in dentistry for indirect restorations.

RESUMEN

Digital technologies are gradually gaining ground in dentistry. In particular, taking impressions with intraoral scanners is becoming routine; however, even this must often be preceded by the use of retraction cords. This article presents an innovative technique to record digital impressions of natural tooth abutments using interim restorations relined with impression material instead of retraction cords. In the laboratory, using computer-aided design, the technician can segment the internal surface of the interim restoration and use it to replace the abutment of the intraoral scan, thus obtaining an accurate coping that yields more detailed information about the supragingival and intrasulcular surface of the preparation.

Asunto(s)

RESUMEN

Recently, due to the high demand for dental implants, the use of dental implant stock abutments has increased significantly, especially dental custom CAD/CAM implant abutments milled by dental technicians in their laboratories. The purpose of this study is to analyze the surface quality of the emergence profile of dental custom CAD/CAM implant abutments made by a non-industrial milling machine, compared to original and compatible dental implant stock abutments made by industrial machines. Thirty dental implant abutments were divided into six study lots. Lot 1 (control group): original dental implant stock abutments-industrial machined; lot 2 (study group): compatible dental implant stock abutments-industrial machined; lots 3, 4, 5, and 6 (study groups): compatible custom CAD/CAM dental implant abutments-non-industrial milled with hyperDENT CAM software and Paragon Tools. The Nikon SMZ745T stereomicroscope was used to analyze the emergence profile surface of each dental implant abutment. The structure of the analyzed surfaces did not show significant differences between original and compatible abutments that were industrially machined. As for the customized dental implant abutments, the greatest similarity with the original was obtained for lot 6, and a significant statistical difference was obtained for lot 4. Stepover and Feed Rate parameters of the milling process influenced the surface roughness of the emergence profile for the customized dental implant abutments. The digital technology of non-industrial milling compatible custom CAD/CAM dental implant abutments is reliable and within the correct milling parameters.

RESUMEN

Dental anatomy education for dental technology students should be developed in alignment with digital dental laboratory practices. We hypothesized that a virtually assisted sketching-based dental anatomy teaching module could improve students' acquisition of skills essential for digital restoration design. The second-year dental technology curriculum included a novel virtual technology-assisted sketching-based module for dental anatomy education. Pre- and post-course assessments evaluated students' skill sets and knowledge bases. Computer-aided design (CAD) scores were analyzed after one year to assess how the skills students developed through this module impacted their subsequent CAD performance. Participants who undertook the dental sketching-based teaching module demonstrated significantly improved theoretical knowledge of dental anatomy, dental aesthetic perception, and spatial reasoning skills. A partial least squares structural equation model indicated that the positive effects of this module on subsequent CAD performance were indirectly mediated by dental aesthetic perception, spatial reasoning, and practice time. A virtually assisted sketching-based dental anatomy teaching module significantly improved students' acquisition of skills and knowledge and positively mediated dental technology students' CAD performance.

Asunto(s)

RESUMEN

This study aimed to assess dental technologists/technicians knowledge, attitudes, and practice during the COVID-19 pandemic in Saudi Arabia. This cross-sectional study was conducted among workers in dental laboratories in Saudi Arabia. A validated questionnaire was developed based on previous literature and distributed online. The questionnaire assessed the study population's knowledge, attitude, and practice regarding infection control protocol for COVID-19. Descriptive statistics of categorical variables were conducted. The response rate was 58.3%, where most respondents are male at a rate of 97%. Most of the participants (82%) were aware of the various infection control measures for COVID-19 in a dental laboratory. Forty-eight participants showed a level of knowledge range between 80 and 100%, while 27 and 30 participants reported moderate and low level of knowledge, respectively. Only 67% of the participants strongly agree that dental cast and fabricated/repaired restorations should be transferred in a very close and protective package to control infection. About 70% of participants indicated they always wear protective gear/goggles and should be warned while working in the dental laboratory. As the pumice slurry was utilized frequently to clean and polish the prostheses, 66% of participants agreed that pumice slurry should be always changed regularly. Regarding COVID-19 infection control procedures, dental technologists/technicians showed good knowledge, attitude, and practice; however, considering how infectious the virus is, more measures should be taken into consideration. Effective communication and collaboration between the laboratory and the dental clinic are essential for infection control.

RESUMEN

The integration of wireless sensors with artificial intelligence could represent a transformative approach in restorative dentistry, offering a sophisticated means to enhance diagnostic precision, treatment planning, and patient outcomes. This systematic review was conducted to pinpoint and assess the efficacy of wireless sensors in restorative dentistry. The search methodology followed the guidelines outlined by PRISMA and involved the utilization of prominent scientific databases. Following the final phase of evaluating eligibility, the systematic review included six papers. Five experiments were conducted in vitro, while one was a randomized clinical trial. The investigations focused on wireless sensors for cavity diagnosis, toothbrush forces, facial mask applications, and physiological parameter detection from dental implants. All wireless sensors demonstrated efficacy in achieving the objectives established by each study and showed the validity, accuracy, and reproducibility of this device. The investigations examined in this systematic review illustrate the potential of wireless sensors in restorative dentistry, especially in the areas of caries detection, dental implant systems, face masks, and power brushes. These technologies hold promise for enhancing patient outcomes and alleviating the workload of dental practitioners.

RESUMEN

OBJECTIVE: A diagnostic mock-up is a key tool that allows a preview of the outcome of an esthetic restoration. With recent developments in CAD/CAM technology, it is important to understand the pros and cons of chairside digital dentistry and the restorative materials used. The aim of the present case report is to describe in detail the use of a 3D-printed mock-up fabricated from a polymer-based material for an esthetic treatment plan within a fully digital workflow. CASE REPORT: A 45-year-old female patient presented at the clinic concerned about her esthetic appearance and the color of her anterior incisors. After a conclusive diagnosis, a restoration was planned using ceramic veneers from maxillary premolar to premolar. For a preview visualization of the outcome, an intraoral scanner was used to obtain 3D images and to allow the design of a digital smile. The template STL file was exported to a 3D printer and a 0.6-mm mock-up in A3-shade 3D resin was produced after 25 min. The mock-up was tested through a try-in and approved by the patient. As a result, the printed mock-up was considered predictable and reliable for the final restoration. CONCLUSIONS: The ease, speed, and reduced costs derived from the digital workflow, in conjunction with the accuracy of the mock-up, made the procedure highly efficient and recommendable.

Asunto(s)

RESUMEN

The present technical article describes a protocol to digitally reproduce the emergence profile of an interim implant prosthesis (IP) and to transfer its macrogeometry into the definitive restoration. The purpose of this protocol was to minimize alterations in the gingival architecture developed during the interim restorative phase of a single implant that could potentially jeopardize its esthetic outcome. The process included obtaining an intraoral scan with the interim IP in situ, a duplicate of this intraoral scan that was used to capture the exact position of the implant, and an extraoral scan of the prosthesis. These data could then be imported into IOS software to create a model where the patients' soft tissue was incorporated with precision, allowing for the fabrication of a definitive crown with an optimal soft tissue adaptation. As there are few articles in the scientific literature that have reported a consistent method to replicate the emergence profile of an interim IP, the present technical article aims to highlight the potential of utilizing the emergence profile of an interim IP created by IOS software.

Asunto(s)

RESUMEN

Dental Robotics represent a groundbreaking technological frontier with the potential to disrupt traditional paradigms in oral healthcare. This abstract explores the transformative impact of robotic applications in dentistry, focussing on precision, reproducibility, and reliability. A comprehensive search was conducted on the PubMed database, Dental and Oral Science, and CINAHL to identify pertinent studies exploring the implications of robotics in dentistry. Studies incorporated in this analysis highlighted the significance of broadening the research scope beyond implantology. This review underscores the importance of integrating robotic dentistry into educational frameworks and advancing technological preparedness. As we navigate these challenges, the abstract underscores the pivotal role of robotic dentistry in shaping the future of oral healthcare. Robotic dentistry promises transformative advancements in oral healthcare with precision and reliability. Challenges like limited system availability and expertise highlight the need for increased dentist-engineer collaboration. Diversifying research, emphasizing non-invasive technologies, and integrating robotic dentistry into education are crucial for wider acceptance. Public awareness and regulatory clarity are pivotal for seamless integration, unlocking the vast potential of robotic technologies in the future of dental care.

Asunto(s)

RESUMEN

Background: Removable partial denture (RPD) design is crucial to long-term success in dental treatment, but shortcomings in RPD design training and competency acquisition among dental students have persisted for decades. Digital production is increasing in prevalence in stomatology, and a digital RPD (D-RPD) module, under the framework of the certified Objective Manipulative Skill Examination of Dental Technicians (OMEDT) system reported in our previous work, may improve on existing RPD training models for students. Objective: We aimed to determine the efficacy of a virtual 3D simulation-based progressive digital training module for RPD design compared to traditional training. Methods: We developed a prospective cohort study including dental technology students at the Stomatology College of Chongqing Medical University. Cohort 1 received traditional RPD design training (7 wk). Cohort 2 received D-RPD module training based on text and 2D sketches (7 wk). Cohort 3 received D-RPD module pilot training based on text and 2D sketches (4 wk) and continued to receive training based on 3D virtual casts of real patients (3 wk). RPD design tests based on virtual casts were conducted at 1 month and 1 year after training. We collected RPD design scores and the time spent to perform each assessment. Results: We collected the RPD design scores and the time spent to perform each assessment at 1 month and 1 year after training. The study recruited 109 students, including 58 (53.2%) female and 51 male (56.8%) students. Cohort 1 scored the lowest and cohort 3 scored the highest in both tests (cohorts 1-3 at 1 mo: mean score 65.8, SD 21.5; mean score 81.9, SD 6.88; and mean score 85.3, SD 8.55, respectively; P<.001; cohorts 1-3 at 1 y: mean score 60.3, SD 16.7; mean score 75.5, SD 3.90; and mean score 90.9, SD 4.3, respectively; P<.001). The difference between cohorts in the time spent was not statistically significant at 1 month (cohorts 1-3: mean 2407.8, SD 1370.3 s; mean 1835.0, SD 1329.2 s; and mean 1790.3, SD 1195.5 s, respectively; P=.06) but was statistically significant at 1 year (cohorts 1-3: mean 2049.16, SD 1099.0 s; mean 1857.33, SD 587.39 s; and mean 2524.3, SD 566.37 s, respectively; P<.001). Intracohort comparisons indicated that the differences in scores at 1 month and 1 year were not statistically significant for cohort 1 (95% CI -2.1 to 13.0; P=.16), while cohort 3 obtained significantly higher scores 1 year later (95% CI 2.5-8.7; P=.001), and cohort 2 obtained significantly lower scores 1 year later (95% CI -8.8 to -3.9; P<.001). Conclusions: Cohort 3 obtained the highest score at both time points with retention of competency at 1 year, indicating that progressive D-RPD training including virtual 3D simulation facilitated improved competency in RPD design. The adoption of D-RPD training may benefit learning outcomes.

RESUMEN

With the growing understanding of the relationship between oral and systemic diseases there is an increasing interest in integrating dental providers more completely into the health care delivery system. Technology advancements in traditional dental disease diagnosis and management as well as in salivary diagnostics for systemic disease provide great opportunities for the profession but numerous challenges for dental educators who are impacted by the intersection of numerous, sometimes competing interests. While economic factors play a significant role in curricular innovation and change, in the United States the accrediting process for dental education programs can be an equally vexing challenge. Movement away from primarily a competency-based assessment model to a model focusing on the establishment of Entrustable Professional Activities (EPAs) may provide a needed catalyst to enhance dental education to graduate dentists who embrace an expanded role as primary care providers.

Asunto(s)

RESUMEN

Statement of the Problem: Health information technology is used in dentistry worldwide. Despite the limited specialized resources for providing orthodontic treatment in Iran, the need to examine the technology acceptance model (TAM) seems necessary and is a significant step in the successful acceptance of teleorthodontic technology. Purpose: The present study has identified and investigated the factors affecting the acceptance of teleorthodontic technology among orthodontists based on the TAM3 with the aim of successful implementation and deployment of this technology. Materials and Method: In this descriptive-analytical research, 300 Iranian orthodontists who were members of the Iranian Orthodontic Association were selected by census sampling. The data was gathered through a modified and accommodated questionnaire called the acceptance model 3. The validity was confirmed. Moreover, the reliability was calculated based on Cronbach's alpha, which was equal to 0.870. Multiple linear regression analysis was also utilized to investigate the relationships between dependent, independent, and mediator variables. Besides, the final model was designed by the Amos software. Results: The results of 251 orthodontic specialists proved that subjective norm, job relevance, output quality, results in demonstrability, and job relevance on output quality could significantly affect perceived usefulness. Similarly, the perception of external control was identified to have a significant influence on perceived ease of use. On the other hand, the perceived usefulness does not play a mediating role between perception and subjective norm. Furthermore, perceived usefulness was confirmed as a mediating factor in relationship to both perceived ease of use and behavioral intention. Conclusion: The findings of the present study revealed valuable scientific evidence to identify and apply the key factors affecting the acceptance and use of modern teleorthodontic technology in Iran. Besides, the structure of the TAM3 was recognized as fruitful and worthwhile for predicting the acceptance of this new technology and also in identifying key effective factors.

RESUMEN

Background/purpose: Producing tooth crowns through dental technology is a basic function of dentistry. The morphology of tooth crowns is the most important parameter for evaluating its acceptability. The procedures were divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Materials and methods: Dental plaster rods were prepared. The effective data collected were to classify 121 teeth (15th tooth position), 342 teeth (16th tooth position), 69 teeth (21st tooth position), and 89 teeth (43rd tooth position), for a total of 621 teeth. The procedures are divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Results: The area under the curve (AUC) value was 0, 0.5, and 0.72 in this study. The precision rate and recall rate of micro-averaging/macro-averaging were 0.75/0.73 and 0.75/0.72. If we took a newly carved tooth picture into the program, the current effectiveness of machine learning was about 70%-75% to evaluate the quality of tooth morphology. Through the calculation and analysis of the two different concepts of micro-average/macro-average and AUC, similar values could be obtained. Conclusion: This study established a set of procedures that can judge the quality of hand-carved plaster sticks and teeth, and the accuracy rate is about 70%-75%. It is expected that this process can be used to assist dental technicians in judging the pros and cons of hand-carved plaster sticks and teeth, so as to help dental technicians to learn the tooth morphology more effectively.

RESUMEN

Despite the clear advances regarding the restoration of posterior teeth, especially with the minimally invasive approach, there are still several topics where the available scientific evidence does not provide clear answers in terms of clinical decisions. The indications, differences, and clinical protocols for partial adhesive restorations (onlays, overlays, and endocrowns) and resistance form restorations (full-contour resistive crowns) were presented in Parts I and II of the present article series based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. Now, in Part III, the focus is on different approaches of managing subgingival areas, gaining "ferrule" design, and the role of posts on the restorability strategies of severely compromised teeth.

Asunto(s)

RESUMEN

Objective:To investigate the current status and problems of the development of dental technology specialty in higher vocational colleges in China, and to provide a reference for the establishment of national standards for vocational education on dental technology and the development of high-quality higher vocational education.Methods:We selected 54 higher vocational colleges in eastern, central, and western China offering dental technology programs by stratified random sampling to survey the specialty development situation using a questionnaire. Data were analyzed using the independent samples t test, one-way analysis of variance, or chi-square test with the use of SPSS 18.0. Results:Among the surveyed colleges, the average annual enrollment scale in recent three years was 6 415 students, with the largest enrollment in western regions, accounting for 47.39%. In terms of teaching faculty, there were differences in educational attainment, professional title structure, vocational qualification, and professional background between different regions ( P<0.05). Regarding training conditions, only 26.42% and 3.77% of colleges were equipped with virtual simulation training rooms and dental materials training rooms, respectively; and 18.52% and 22.22% of colleges were equipped with chairside repair systems and virtual simulation software, respectively. Conclusions:Regional imbalances exist in the development of dental technology specialty in higher vocational colleges in China. The overall level of teaching staff, practical training conditions, and curriculum construction need to be improved.

RESUMEN

ABSTRACT Introduction: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. Objective: Therefore, this article aims to describe a technique for superimposing virtual models. Methods: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. Results and Conclusion: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

RESUMO Introdução: A sobreposição de modelos digitais em três dimensões (3D) tem sido cada vez mais utilizada como forma de avaliar as alterações dentárias decorrentes do tratamento instituído, e diferentes técnicas de sobreposição têm sido descritas. Apesar de a maxila apresentar áreas de maior estabilidade para sobreposição dos modelos, como as rugas palatinas, ainda não existe um método confiável para a sobreposição da arcada inferior. Objetivo: O presente artigo tem como objetivo descrever uma técnica de sobreposição de modelos virtuais. Métodos: Para avaliar as alterações pré e pós-tratamento ortodôntico, foi usado o software Geomagic Qualify 2013 (3D Systems®, Rock Hill, Carolina do Sul, EUA) , utilizando pontos de referência na maxila na região das rugas palatinas e uma área de referência na zona do palato e rafe palatina mediana. Já a arcada inferior foi sobreposta utilizando o modelo em máxima intercuspidação habitual (MIH) como referência. Resultados e Conclusão: A sobreposição de modelos utilizando as rugas palatinas e a oclusão em MIH parece oferecer resultados satisfatórios na interpretação das alterações clínicas entre momentos diferentes de acompanhamento, seja do crescimento/desenvolvimento e/ou resultados do tratamento ortodôntico.

RESUMEN

OBJECTIVES: Evidence on the reliability of digital techniques for wear volume assessment using three-dimensional (3D) scan datasets is scarce. This study evaluated the reliability of a repeated-scan superimposition technique and two single-scan techniques in assessing wear volume loss on flat surfaces of 3D-printed resin specimens. METHODS: Cuboid-shaped (15×10×10 mm) resin specimens were 3D-printed (n = 14) and scanned before and after 200,000 cycles of masticatory simulation. For the repeated-scan superimposition technique, digital 3D models of specimens before and after masticatory simulation were superimposed, and the volume loss was determined. The first single-scan technique utilized a computer-aided design freeware program, while the second one employed a 3D-metrology software program. In the freeware program, the worn area of 3D objects was edited directly to obtain a flat surface. In the 3D-metrology software program, the worn area was deleted first and then filled to the flat surface. The volume differences before and after editing were calculated in each software program. Agreement between the three measurement techniques was determined through intraclass correlation coefficients (ICCs). One-way analysis of variance was performed to compare the wear volume loss assessed by the three techniques (α = 0.05). RESULTS: High inter-technique reliability was observed between the three assessment techniques (ICC = 0.998, p < .001). On pair-wise comparisons of two of the three techniques, all pairs showed high consistency (ICC ≥ 0.999, p < .001). No significant difference was found in the wear volume loss assessed using the three techniques (p = .996). CONCLUSIONS: Digital repeated-scan superimposition and two single-scan techniques demonstrated high reliability in assessing wear volume loss on flat surfaces. CLINICAL SIGNIFICANCE: The repeated-scan superimposition technique can be effectively utilized to assess wear volume loss of anatomically shaped specimens and flat surfaces. This study indicates that the single-scan techniques may serve as a suitable alternative to the repeated-scan superimposition technique when evaluating wear volume loss of flat surfaces.

Asunto(s)

RESUMEN

BACKGROUND: The integration of artificial intelligence (AI) in dentistry has the potential to revolutionise the field of dental technologies. However, dental technicians' views on the use of AI in dental technology are still sparse in the literature. This qualitative study aimed to explore the perceptions of dental technicians regarding the use of AI in their dental laboratory practice. METHODS: Twelve dental technicians with at least five years of professional experience and currently working in Malaysia agreed to participate in the one-to-one in-depth online interviews. Interviews were recorded, transcribed verbatim and translated. Thematic analysis was conducted to identify patterns, themes, and categories within the interview transcripts. RESULTS: The analysis revealed two key themes: "Perceived Benefits of AI" and "Concerns and Challenges". Dental technicians recognised the enhanced efficiency, productivity, accuracy, and precision that AI can bring to dental laboratories. They also acknowledged the streamlined workflow and improved communication facilitated by AI systems. However, concerns were raised regarding job security, professional identity, ethical considerations, and the need for adequate training and support. CONCLUSION: This research sheds light on the potential benefits and challenges associated with the integration of AI in dental laboratory practices. Understanding these perceptions and addressing the challenges can support the effective integration of AI in dental laboratories and contribute to the growing body of literature on AI in healthcare.

Asunto(s)

RESUMEN

Nowadays, many people use clear aligners to address their dental issues. The efficacy of transparent dental aligners must be investigated even though they are more aesthetically pleasing, easy to use, and tidy than permanent tools. Thirty-five patients in this study's sample group who used Nuvola® clear aligners for their orthodontic therapy were prospectively observed. Initial, simulated, and final digital scans were analysed with a digital calliper. The actual results were compared with the prescribed ending position to evaluate the efficacy of transversal dentoalveolar expansion. Aligner treatments in Groups A (12) and B (24), particularly in the dental tip measures, demonstrated high adherence to the prescription. On the other hand, the gingival measures exhibited a greater level of bias, and the differences were statistically significant. However, there was no difference in the outcomes between the two groups (12 vs. 24). Within specific parameters, the evaluated aligners were shown to be helpful in predicting movements in the transverse plane, particularly when considering movements linked to the vestibular-palatal inclination of the dental elements. This article compares the expansion effectiveness of Nuvola® aligners compared with other work in the literature using competitor companies.