RESUMEN

Objectives: This study investigates the impact of injected fish-scale-derived hydroxyapatite nanoparticles (FsHA-NPs) on orthodontic tooth movement (OTM) and the width of the periodontal ligament (PDL) space. Materials and Methods: Twenty-six Wistar rats underwent mesial orthodontic traction with a force of 50 g for 21 days. Following the application of the orthodontic appliance, the rats were randomly divided into two groups: a control group, which received a 0.3 µg saline injection, and the experimental FsHA group, which received 100 mg/0.3 ml of FsHA-NPs after thorough characterisation. Injections were administered immediately after appliance application and repeated at 7 and 14 days. Statistical analysis was conducted with a significance level of P ≤ 0.05. Result: The experimental group exhibited a significant reduction in OTM at 7-, 14-, and 21-day post-force application. Additionally, a reduction in PDL width was observed in the mesiocervical and disto-apical regions of the mesial and distal roots of the first molar. Conclusion: FsHA-NPs derived from biowaste fish scales exhibit promising potential as biomaterials for enhancing control over OTM. This study underscores the viability, accessibility, and safety of FsHA-NPs as a locally injectable material for orthodontic applications.

RESUMEN

Zinc is known for its role in enhancing bone metabolism, cell proliferation, and tissue regeneration. Several studies proposed the incorporation of zinc into hydroxyapatite (HA) to produce biomaterials (ZnHA) that stimulate and accelerate bone healing. This systematic review aimed to understand the physicochemical characteristics of zinc-doped HA-based biomaterials and the evidence of their biological effects on osteoblastic cells. A comprehensive literature search was conducted from 2022 to 2024, covering all years of publications, in three databases (Web of Science, PUBMED, Scopus), retrieving 609 entries, with 36 articles included in the analysis according to the selection criteria. The selected studies provided data on the material's physicochemical properties, the methods of zinc incorporation, and the biological effects of ZnHA on bone cells. The production of ZnHA typically involves the wet chemical synthesis of HA and ZnHA precursors, followed by deposition on substrates using processes such as liquid precursor plasma spraying (LPPS). Characterization techniques confirmed the successful incorporation of zinc into the HA lattice. The findings indicated that zinc incorporation into HA at low concentrations is non-cytotoxic and beneficial for bone cells. ZnHA was found to stimulate cell proliferation, adhesion, and the production of osteogenic factors, thereby promoting in vitro mineralization. However, the optimal zinc concentration for the desired effects varied across studies, making it challenging to establish a standardized concentration. ZnHA materials are biocompatible and enhance osteoblast proliferation and differentiation. However, the mechanisms of zinc release and the ideal concentrations for optimal tissue regeneration require further investigation. Standardizing these parameters is essential for the effective clinical application of ZnHA.

RESUMEN

The purpose of this research was to assess the effectiveness of an innovative medical device capable of extracting tooth graft materials directly from the patient's own teeth. Twenty consecutive tooth grafting procedures were conducted, with an average follow-up period of 18 months. METHODS: Twenty patients requiring tooth extraction underwent socket preservation utilizing the extracted tooth as the grafting material. RESULTS: After a 4-month healing period, the defects were significantly filled with newly formed hard tissue. Subsequently, bone biopsies were performed during dental implant placement to evaluate histological outcomes. The tissue exhibited a similar density to medium-density bone, displaying a homogeneous and uniform appearance without any visible signs of inflammation. The post-operative healing phase was free from infective complications or indications of graft particles within the regenerated bone structure. The histomorphometric analyses revealed the following results: bone total volume, BV% 52.6 ± 13.09, vital bone VB% 40.39 ± 15.86, residual graft % 12.20 ± 12.34. CONCLUSION: The study demonstrated positive bony healing in guided regenerative surgery procedures using autologous tooth grafts. However, further research with an extended follow-up period is necessary to thoroughly assess the potential of demineralized dentin autografts.

RESUMEN

The field of dental materials is undergoing rapid advancements in the pursuit of an innovative generation of dental polymeric restorative materials. There is a growing interest in the development of a distinct category of dental polymers that transcend the conventional role of inertly filling prepared cavities. Instead, these materials possess the capacity to actively detect and respond to alterations within the host environment by undergoing dynamic and controlled molecular changes. Despite the well-established status of stimuli-responsive polymeric systems in other fields, their implementation in dentistry is still in its nascent stages, presenting a multitude of promising opportunities for advancement. These systems revolve around the fundamental concept of harnessing distinctive stimuli inherent in the oral environment to trigger precise, targeted, predictable, and demand-driven responses through molecular modifications within the polymeric network. This review aims to provide a comprehensive overview of the diverse categories of stimuli-responsive polymers, accentuating the critical aspects that must be considered during their design and development phases. Furthermore, it evaluates their current application in the dental field while exploring potential alternatives for future advancements.

RESUMEN

This comprehensive review provides an in-depth analysis of the use of biomaterials in the processes of guided tissue and bone regeneration, and their indispensable role in dental therapeutic interventions. These interventions serve the critical function of restoring both structural integrity and functionality to the dentition that has been lost or damaged. The basis for this review is laid through the exploration of various relevant scientific databases such as Scopus, PubMed, Web of science and MEDLINE. From a meticulous selection, relevant literature was chosen. This review commences by examining the different types of membranes used in guided bone regeneration procedures and the spectrum of biomaterials employed in these operations. It then explores the manufacturing technologies for the scaffold, delving into their significant impact on tissue and bone regenerations. At the core of this review is the method of guided bone regeneration, which is a crucial technique for counteracting bone loss induced by tooth extraction or periodontal disease. The discussion advances by underscoring the latest innovations and strategies in the field of tissue regeneration. One key observation is the critical role that membranes play in guided reconstruction; they serve as a barrier, preventing the entry of non-ossifying cells, thereby promoting the successful growth and regeneration of bone and tissue. By reviewing the existing literature on biomaterials, membranes, and scaffold manufacturing technologies, this paper illustrates the vast potential for innovation and growth within the field of dental therapeutic interventions, particularly in guided tissue and bone regeneration.

RESUMEN

An increasing number of tooth replacement procedures ending with implant failure generates a great need for the delivery of novel biomedical solutions with appropriate mechanical characteristics that would mimic natural tissue and undergo biodegradation. This phenomenon constitutes a significant difficulty for scientists, since currently applied biomaterials dedicated for this purpose are based on stainless steel, Ti, and Ti and CoCr alloys. One of the most promising raw materials is magnesium, which has been proven to promote bone regeneration and accelerate the tissue healing process. Nevertheless, its high reactivity with body fluid components is associated with fast and difficult-to-control biocorrosion, which strongly limits the application of Mg implants as medical devices. The achievement of appropriate functionality, both physiochemical and biological, to enable the commercial use of Mg biomaterials is possible only after their superficial modification. Therefore, the obtainment of uniform, reproducible coatings increasing resistance to the aqueous environment of the human body combined with a nanostructured surface that enhances implant-cell behaviors is an extremely important issue. Herein, we present a successful strategy for the modification of Mg implants via the PEO process, resulting in the obtainment of biomaterials with lower corrosion rates and superior biological properties, such as the promotion of extracellular matrix formation and a positive impact on the proliferation of MG-63 cells. The implants were investigated regarding their chemical composition using the FT-IR and XRD methods, which revealed that MgO layer formation, as well as the incorporation of electrolyte components such as fluorine and silica, were responsible for the increased microhardness of the samples. An extensive study of the biomaterials' morphology confirmed that successful surface modification led to a microporous structure suitable for the attachment and proliferation of cells. The three-layer nature of the newly-formed coatings, typical for PEO modification, was confirmed via cross-section analysis. A biocorrosion and biodegradation study proved that applied modification increased their resistance to body fluids. The cell culture study performed herein confirmed that the correct adjustment of modification parameters results in a lack of cytotoxicity of the magnesium implants, cell proliferation enhancement, and improvement in extracellular matrix formation.

RESUMEN

The use of stem cells in regenerative medicine had great potential for clinical applications. However, cell delivery strategies have critical importance in stimulating the differentiation of stem cells and enhancing their potential to regenerate damaged tissues. Different strategies have been used to investigate the osteogenic potential of dental stem cells in conjunction with biomaterials through in vitro and in vivo studies. Osteogenesis has a broad implication in regenerative medicine, particularly for maxillofacial defects. This review summarizes some of the most recent developments in the field of tissue engineering using dental stem cells.

Asunto(s)

RESUMEN

Adansonia digitata (Baobab) tree is an African tree with a long history in traditional medicine. The local inhabitants of Africa have been using the different tree components to treat medical diseases, such as fever, diarrhea, malaria, cough, dysentery, and microbial infections. Recently, the tree gained the attention of scientists due to its medical and pharmaceutical properties and nutritional values, which generated a myriad number of investigations regarding its phytochemical and macro- and micronutrient contents. The fruit pulp is especially rich in vitamin C, pectin, fibers, and minerals such as calcium, magnesium, potassium, phosphorus, zinc, iron, and copper. Additionally, the leaves contain high levels of calcium, while the seeds are considered a good source of protein and fat. Altogether, they contain a variety of polyphenols, fatty acids, and amino acids. The tree extracts possess potent antioxidant, cell-protective, and anti-inflammatory activities. However, no information was found in the literature about the use of Baobab tree products in the dental field. The aim of this review is to discuss the well-documented medical effects and chemical and mineral components of the different Baobab tree parts from a dental point of view to open more areas of research concerning its potential applications in the dental field. Antioxidants and vitamin C are known to help in maintaining healthy periodontal and gingival tissues. They also help in wound healing and alveolar bone integrity. Moreover, phytochemicals and phenolic compounds have been utilized in controlling dental plaque and manufacturing intracanal medications as they manifest antimicrobial and anti-inflammatory activities. Furthermore, calcium and phosphorus incorporation in dental biomaterials is commonly used in vital pulp therapy and repairing bone defects. After reviewing the reported medicinal and pharmaceutical activities of the Baobab tree, it can be inferred that the tree extracts possess potential uses in the dental field, which requires further investigation for validation.

RESUMEN

Owing to the development of glass 45S5 (Bioglass®) comprising 45 mol% SiO2, 24.5 mol% Na2O, 24.5 mol% CaO, and 6 mol% P2O5, different compositions of silicate glasses have been developed. When these silicate glasses contact an aqueous environment, such as body fluids, they induce apatite layer formation on their surfaces owing to ion exchange. In addition to promoting hard tissue formation, researchers have sought to enhance the antibacterial properties of these glasses, thereby resulting in the development of metal-doped silicate glasses. The addition of antibacterial metals (silver, copper, zinc, and gallium) to silicate glass offers a promising avenue for combating oral pathogens. In recent years, there has been growing interest in metal-doped phosphate glasses. The release of metal ions can be regulated by modifying the dissolution rate of the phosphate glasses. This review summarizes the metal-doped silicate and phosphate glasses that confer antibacterial activity. Future strategies for the development of dental biomaterials that incorporate metal-doped glass and exhibit antibacterial effects are discussed.

RESUMEN

OBJECTIVES: Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions. MATERIALS AND METHODS: Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%. RESULTS: Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR). CONCLUSIONS: All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time. CLINICAL RELEVANCE: Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.

Asunto(s)

RESUMEN

Dental implants to replace lost teeth are a common dentistry practice nowadays. Titanium dental implants display a high success rate and improved safety profile. Nevertheless, there is an increasing peri-implantitis (PI), an inflammatory disease associated with polymicrobial infection that adversely affects the hard and soft tissues around the implant. The present review highlights the contribution of different metabolic conditions to PI. The considerations of both local and systemic metabolic conditions are crucial for planning successful dental implant procedures and during the treatment course of PI. Un- or undertreated PI can lead to permanent jaw bone suffering and dental implant losses. The common mediators of PI are inflammation and oxidative stress, which are also the key mediators of most systemic metabolic disorders. Chronic periodontitis, low-grade tissue inflammation, and increased oxidative stress raise the incidence of PI and the underlying systemic metabolic conditions, such as obesity, diabetes mellitus, or harmful lifestyle factors (cigarette smoking, etc.). Using dental biomaterials with antimicrobial effects could partly solve the problem of pathogenic microbial contamination and local inflammation. With local dentistry considering factors, including oral microbiota and implant quality control, the inclusion of the underlying systemic metabolic conditions into the pre-procedure planning and during the treatment course should improve the chances of successful outcomes.

RESUMEN

OBJECTIVE: This literature research aimed to compare, contrast and quantify the innovations in the most commonly used dental biomaterials. METHODOLOGY: Original research articles based on experimental dental biomaterials published between 2007 and 2019 were retrieved and reviewed. A search of electronic databases, PubMed, Scopus, and Web of Science indexed dental/biomaterials journals, has been conducted. The inclusion criteria in this research were: synthesis of experimental dental materials, whereas commercial dental materials, review articles, and clinical trials (case reports) were excluded. RESULTS: It was found that the amount of publications related to dental subgingival implants, computer-aided modeling ceramics, aesthetic restorative materials, adhesives cements, ceramics, bioceramics, endodontic materials, bioactive scaffolds, stem cells, and guided-tissue membranes had increased significantly from 2007. At the same time, the number of publications related to dental cements, silver amalgam, and dental alloys has decreased. For characterization of dental materials it was noted that mechanical properties were tested mostly for restorative materials. On the other hand, biological properties were most assessed for dental subgingival implants and endodontic materials, however, physical properties predominantly for bioceramics. CONCLUSION: It is concluded that to meet clinical demands there was more focus on restorative materials that provided better aesthetics, including resin composites, adhesive resin composites (luting cements), zirconia, and other ceramics. The boost in laboratory and animal research related to bioceramics was attributed to their regenerative potential. This current literature study will help growing researchers to consider and judge the direction to which research might be guided in order to plan prospective research projects.

RESUMEN

BACKGROUND: Clinical success depends on the contact strength and wear resistance of medical devices made of polymer materials. The scientific goal resulted from the problem of using different methods of surface evaluation of materials used in the production of orthodontic appliances. The purpose of the work was an experimental comparative assessment of indentation hardness and scratch hardness and the sliding wear of four selected polymeric materials used in the manufacture of orthodontic appliances. METHODS: Four commercial materials were compared. Shore hardness tests and a scratch test with a Rockwell indenter were performed. A sliding wear test was performed using the ball-on-disc method. Statistical PCA and correlation analyses were performed. RESULTS: The results of scratch hardness measurements using a contact profilometer correlated with the Shore hardness to a greater extent than measurements made using an optical microscope. PCA showed that Shore hardness explains 45% of the total variance in all the results across the materials. CONCLUSIONS: The scratch hardness method allows for a more explicit ranking of orthodontic polymeric materials when measurements are made with a profilometer. The ranking of sliding wear resistance should be made separately.

RESUMEN

The salivary pellicle, an adlayer formed by adsorption of salivary components on teeth and dental biomaterials, has direct consequences on basic outcomes of dentistry. Here, we provide an overview of salivary pellicle formation processes with a critical focus on dental biomaterials. We describe and critique the array of salivary pellicle measurement techniques. We also discuss factors that may affect salivary pellicle formation and the heterogeneity of the published literature describing salivary pellicle formation on dental biomaterials. Finally, we survey the many effects salivary pellicles have on dental biomaterials and highlight its implications on design criteria for dental biomaterials. Future investigations may lead to rationally designed dental biomaterials to control the salivary pellicle and enhance material function and patient outcomes.

Asunto(s)

RESUMEN

Palladium (Pd) is a widely used metal and extremely important biomaterial for the reconstruction of occlusions during dental restorations. However, metallic biomaterials can cause serious allergic reactions, such as Pd-related oral mucositis seen in dentistry. Metal allergy is categorized as a type IV allergy and we demonstrated that CD8 T cells play an important role in Pd allergy previously. As TCR of CD8 T cells recognizes MHC class I/peptide complex, the antigen specificity to this complex seems to be generated during Pd allergy. However, it remains unknown if Pd affects the MHC class I/peptide complex. In this study, we investigated the behavior of the MHC class I/peptide complex in response to Pd treatment. We found that PdCl2 treatment altered peptide presentation on MHC class I and that co-culture with Pd-treated DC2.4 cells induced activation of Pd-responsive TCR-expressing T cell line. Furthermore, PdCl2 treatment induced temporal MHC class I internalization and inhibition of membrane movement suppressed Pd-induced T cell-mediated antigenicity. These data suggest that Pd-induced MHC class I internalization is critical for generation of antigenicity through a mechanism including differential peptide loading on MHC class I, which results in Pd allergy.

Asunto(s)

RESUMEN

Changes in intraoral pH can cause changes in the chemical decomposition and surface properties of treated resin-based pits and fissure sealants (sealant). The purpose of this study is to evaluate the release of bisphenol A (BPA) from sealants under three different pH conditions over time. The test specimen was applied with 6 sealants 5 mg each on a glass plate (10 × 10 mm) and photopolymerized. The samples were immersed for 10 min, 1 h, and 24 h in solutions of pH 3.0, 6.5, and 10.0 at 37 °C. BPA release was measured using a gas chromatography-mass spectrometer. A statistical analysis was performed by two-way ANOVA and one-way ANOVA to verify the effect of pH conditions and time on BPA release. The BPA concentration in the pH 3.0 group was higher at all points than with pH 6.5 and pH 10.0 (p < 0.05), and gradually increased over time (p < 0.05). As a result, it was confirmed that low pH negatively influences BPA release. Therefore, frequent exposure to low pH due to the consumption of various beverages after sealant treatment can negatively affect the sealant's chemical stability in the oral cavity.

RESUMEN

OBJECTIVES/AIMS: Bone graft materials are widely used at present because inadequate bone volume is usually found in implant patients. To determine the biocompatibility of a new grafting material, in vitro research is routinely performed before animal experiments and clinical testing. However, during in vitro experiments, bone material particles might move during testing, which could affect the accuracy of the results. MATERIALS AND METHODS: To evaluate the biocompatibility of new bone substitutes, Mega-oss and Mega-TCP were compared with Bio-Oss using osteoblast cells and osteoclast cells fixed with alginate gel. Cell morphology, viability, bone resorption, alkaline phosphatase (ALP) activity, and staining were tested to compare the biocompatibility differences in the performance of Mega-oss, Mega-TCP, and Bio-Oss. RESULTS: Cells spread better on Mega-oss and Mega-TCP than the round shape on Bio-Oss. The 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) results showed that Mega-oss, Mega-TCP, and sodium alginate had good viability. Meanwhile, Mega-oss and Mega-TCP had the same osteoblast differentiation ability as Bio-Oss. The resorption rates of Mega-TCP and Mega-oss were higher than those of Bio-Oss (24.4%, 15.3%, and 3.3%, respectively). CONCLUSION: Mega-oss and Mega-TCP might be useful alternative bone graft materials compared with Bio-Oss. In addition, fixing the materials with sodium alginate gel could be a new method for in vitro bone material experiments.

RESUMEN

3D printed biomaterials have been extensively investigated and developed in the field of bone regeneration related to clinical issues. However, specific applications of 3D printed biomaterials in different dental areas have seldom been reported. In this study, we aimed to and successfully fabricated 3D poly (lactic-co-glycolic acid)/ß-tricalcium phosphate (3D-PLGA/TCP) and 3D ß-tricalcium phosphate (3D-TCP) scaffolds using two relatively distinct 3D printing (3DP) technologies. Conjunctively, we compared and investigated mechanical and biological responses on human dental pulp stem cells (hDPSCs). Physicochemical properties of the scaffolds, including pore structure, chemical elements, and compression modulus, were characterized. hDPSCs were cultured on scaffolds for subsequent investigations of biocompatibility and osteoconductivity. Our findings indicate that 3D printed PLGA/TCP and ß-tricalcium phosphate (ß-TCP) scaffolds possessed a highly interconnected and porous structure. 3D-TCP scaffolds exhibited better compressive strength than 3D-PLGA/TCP scaffolds, while the 3D-PLGA/TCP scaffolds revealed a flexible mechanical performance. The introduction of 3D structure and ß-TCP components increased the adhesion and proliferation of hDPSCs and promoted osteogenic differentiation. In conclusion, 3D-PLGA/TCP and 3D-TCP scaffolds, with the incorporation of hDPSCs as a personalized restoration approach, has a prospective potential to repair minor and critical bone defects in oral and maxillofacial surgery, respectively.

RESUMEN

Biomimetic has emerged as a multi-disciplinary science in several biomedical subjects in recent decades, including biomaterials and dentistry. In restorative dentistry, biomimetic approaches have been applied for a range of applications, such as restoring tooth defects using bioinspired peptides to achieve remineralization, bioactive and biomimetic biomaterials, and tissue engineering for regeneration. Advancements in the modern adhesive restorative materials, understanding of biomaterial-tissue interaction at the nano and microscale further enhanced the restorative materials' properties (such as color, morphology, and strength) to mimic natural teeth. In addition, the tissue-engineering approaches resulted in regeneration of lost or damaged dental tissues mimicking their natural counterpart. The aim of the present article is to review various biomimetic approaches used to replace lost or damaged dental tissues using restorative biomaterials and tissue-engineering techniques. In addition, tooth structure, and various biomimetic properties of dental restorative materials and tissue-engineering scaffold materials, are discussed.