RESUMEN

After systematic realization of decarboxylative functionalization of carboxylic acids under heating conditions in our group, we herein reported an electrochemical method for Ni-catalyzed decarboxylative oxygenation of arylacetic acids under open air conditions. The protocol provided corresponding carbonyls including aldehydes and ketones in moderate to satisfactory yields with good functional group tolerance, furthermore, the practicability and advantage of the method was highlighted through Ni-catalyzed oxidative decarboxylation of carboxylic acid-containing drugs and preformation of scalable transformation. Mechanistic studies demonstrated that the possible involvement of free radical intermediate in the conversion.

RESUMEN

The storage and transportation of hydrogen gas, a non-polluting alternative to carbon-based fuels, have always been challenging due to its extreme flammability. In this regard, formic acid (FA) is a promising liquid organic hydrogen carrier (LOHC), and over the past decades, significant progress has been made in dehydrogenating FA through transition metal catalysis. In this review, our goal is to provide a detailed insight into the existing processes to expose various mechanistic challenges associated with FA dehydrogenation (FAD). Specifically, methodologies catalyzed by pincer-ligated metal complexes were chosen. Pincer ligands are preferred as they provide structural rigidity to the complexes, making the isolation and analysis of reaction intermediates less challenging and consequently providing a better mechanistic understanding. In this perspective, the catalytic activity of the reported pincer complexes in FAD was overviewed, and more importantly, the catalytic cycles were examined in detail. Further attention was given to the structural modifications, role of additives, reaction medium, and their crucial effects on the outcome.

RESUMEN

Decarboxylative alkylation of carboxylic acids with easily oxidizable functional groups such as phenol and indole functionalities was achieved using a catalytic amount of basic iron(III) acetate, Fe(OAc)2(OH), in the presence of benzimidazole under 427 nm LED irradiation. Kinetic analyses of this catalytic reaction revealed that the reaction rate is first-order in alkenes and is linearly correlated with the light intensity; the faster reaction rate for the benzimidazole-ligated species was consistent with the increased absorbance in the visible light region. Wide functional group tolerance for the easily oxidizable groups is ascribed to the weak oxidation ability of the in situ-generated oxo-bridged iron clusters compared with other iron(III) species.

RESUMEN

The development of greener and more sustainable synthesis processes for manufacturing commodity chemicals is of great importance. The majority of current phenol production methods involve harsh reaction conditions with high energy consumption, causing severe environmental pollution. In this study, we present a novel approach for the decarboxylation of hydroxybenzoic acids (HBAs) to phenol using a choline chloride-urea (ChCl-urea) deep eutectic solvent (DES). Our study reveals the remarkable dual performance of ChCl-urea both as a catalyst and solvent for the decarboxylation of HBA, resulting in a high phenol yield (94 mol%) under mild reaction conditions. The proposed reaction pathway, established through a combination of experiments and computational simulations, enhances our understanding of this process. The recyclability of the DES system during decarboxylation was also assessed. Our findings demonstrate that the integration of DES into conventional chemical processes can pave the way for sustainable manufacturing, exemplifying a novel approach for producing phenol from abundant natural resources using designer solvents.

RESUMEN

Dithiocarbamate is a key structural sequence in pharmaceuticals and agrochemicals, and its synthesis is crucial in organic chemistry. Although significant progress has been made in related synthesis research, developing a practical and universal synthesis method remains fascinating. Herein, we report a new visible-light-induced decarboxylation coupling reaction between N-hydroxyphthalimide esters and tetraalkylthiuram disulfides, which uses Ir(ppy)3 as a photocatalyst to promote the generation of corresponding decarboxylation thioacylation product-dithiocarbamates in high yields. This redox-neutral protocol uses inexpensive and readily available starting material under mild reaction conditions, exhibiting broad substrate scope and wide functional group compatibility. This method can be further used for post modification of complex natural products and bioactive drugs.

RESUMEN

Nitrite (NO2-) has been identified as a typical pollutant harmful to the human body and heavily assayed in the fields of food safety and water quality control. The mainstream sensing strategies for detecting NO2- depend on Griess reaction or its improved methods which employ Griess reaction to initiate further inter-or intramolecular interaction to generate readout signals. However, a significant drawback of these methods is the use of strongly acidic media. In this study, we designed and synthesized a new NO2--specific fluorescent probe (ethyl 3-cyano-2-hydroxy-5-imino-8-(3-methoxy-3-oxopropyl)-4-(pyridin-2-yl)-5,8-dihydroquinoline-8-carboxylate, DHQC). DHQC exhibited strong green fluorescence in an acetonitrile-PBS (10 mM) mixed system (pH 7.0). In the neutral medium and at room temperature, the fluorescence of DHQC changed from green to blue with the addition of NO2-. The preliminary mechanistic investigation reveals that NO2- can induce the decarboxylation of the probe DHQC. Based on this finding, a high sensitive and selective method for NO2--detection was established, which showed good linearity in a range of 5∼50 µM with a limit detection of 3.5 nM (3σ). Given the unique properties of DHQC, a DHQC-loaded hydrogel bead device was further developed and employed for rapid monitoring of NO2-, exhibiting the advantages of simple preparation, high sensitivity, and fast response compared with traditional sensing reagents. In addition, DHQC was also used as a fluorescent probe for cell-imaging in live cells, exhibiting good cell permeability and biocompatibility. This study proposes a potential strategy for constructing smart fluorimetric probes used for NO2- detection.

Asunto(s)

RESUMEN

Tryptamine is a neuromodulator of the central nervous system. It is also a biogenic amine, formed by the microbial decarboxylation of L-tryptophan. Tryptamine accumulation in cheese has been scarcely examined. No studies are available regarding the factors that could influence its accumulation. Determining the tryptamine content and identifying the factors that influence its accumulation could help in the design of functional tryptamine-enriched cheeses without potentially toxic concentrations being reached. We report the tryptamine concentration of 300 cheese samples representing 201 varieties. 16% of the samples accumulated tryptamine, at between 3.20 mg kg-1 and 3012.14 mg kg-1 (mean of 29.21 mg kg-1). 4.7% of cheeses accumulated tryptamine at higher levels than those described as potentially toxic. Moreover, three technological/metabolic/environmental profiles associated with tryptamine-containing cheese were identified, as well as the hallmark varieties reflecting each. Such knowledge could be useful for the dairy industry to control the tryptamine content of their products.

Asunto(s)

RESUMEN

Cannabinoid decarboxylation via thermo-chemical conversion has the potential to reduce the cannabinoid degradation and evaporation due to short reaction time and use of water as the solvent. When combined with pressurized liquid extraction (PLE), thermo-chemical conversion can be performed as the first stage in the extraction procedure. PLE utilizes a closed system at elevated temperatures and pressure to increase the solvation power, which contributes to decreased viscosity and increased diffusion rate. With this new in-extraction decarboxylation approach there remain variables that need full understanding before up scaling from bench top to pilot or commercial scale. Herein, the thermo-chemical decarboxylation kinetics was studied for industrial hemp via PLE at different temperatures (80-160 °C) and reaction times (1-90 min). The reaction was found to be pseudo-first order. Model verification on CBD and CBG resulted in acceptable results; however, an anomaly in the minor cannabinoids suggests that cannabinoid concentration may influence model kinetics.

RESUMEN

Pyruvate:quinone oxidoreductase (PQO) is a flavin-containing peripheral membrane enzyme catalyzing the decarboxylation of pyruvate to acetate and CO2 with quinone as an electron acceptor. Here, we investigate PQO activity in Corynebacterium glutamicum, examine purified PQO, and describe the crystal structure of the native enzyme and a truncated version. The specific PQO activity was highest in stationary phase cells grown in complex medium, lower in cells grown in complex medium containing glucose or acetate, and lowest in cells grown in minimal acetate-medium. A similar pattern with about 30-fold higher specific PQO activities was observed in C. glutamicum with plasmid-bound pqo expression under the control of the tac promoter, indicating that the differences in PQO activity are likely due to post-transcriptional control. Continuous cultivation of C. glutamicum at dilution rates between 0.05 and 0.4 h-1 revealed a negative correlation between PQO activity and growth rate. Kinetic analysis of PQO enzymes purified from cells grown in complex or in minimal acetate-medium revealed substantial differences in specific activity (72.3 vs. 11.9 U·mg protein-1) and turnover number (kcat: 440 vs. 78 s-1, respectively), suggesting post-translational modifications affecting PQO activity. Structural analysis of PQO revealed a homotetrameric arrangement very similar to the Escherichia coli pyruvate oxidase PoxB except for the C-terminal membrane binding domain, which exhibited a conformation markedly different from its PoxB counterpart. A truncated PQO variant lacking 17 C-terminal amino acids showed higher affinity to pyruvate and was independent of detergent activation, highlighting the importance of the C-terminus for enzyme activation and lipid binding.

RESUMEN

Studies with secretory cavity contents and air-dried inflorescence extracts of the CBD-rich hemp strain, Cannabis sativa cv. 'Cherry Wine', were conducted to compare the decarboxylation rates of acidic cannabinoids between two groups. The secretory cavity contents acquired from the capitate-stalked glandular trichomes by glass microcapillaries, and inflorescence samples air-dried for 15 days of storage in darkness at room temperature were analysed by high-pressure liquid chromatography. The ratio of acidic cannabinoids to the total cannabinoids was ranging from 0.5% to 2.4% lower in the air-dried inflorescence samples compared to the secretory cavity samples as follows. In the secretory cavity content, the percentage of acidic cannabinoids to the total cannabinoids was measured as 86.4% cannabidiolic acid (CBDA), 6.5% tetrahydrocannabinolic acid (THCA), 4.3% cannabichromenic acid (CBCA), 1.4% cannabigerolic acid (CBGA), and 0.6% cannabidivarinic acid (CBDVA), respectively. In the air-dried inflorescence, however, the acidic cannabinoids were detected with 84% CBDA, 4.8% THCA, 3.3% CBCA, 0.8% CBGA, and 0.3% Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA), respectively. The ratio of cannabidiol (CBD) to cannabidiolic acid (CBDA) was close to 1:99 (w/w) in secretory cavity contents, however, it was roughly 1:20 (w/w) in the air-dried inflorescence. In addition, Δ9-tetrahydrocannabivarin (Δ9-THCV) and Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA) were only detected in the air-dried inflorescence sample, and the ratio of Δ9-THCV to Δ9-THCVA was about 1:20 (w/w). Besides, cannabidivarinic acid (CBDVA) was only observed in the secretory cavity content.

Asunto(s)

RESUMEN

Plasmon-induced hot carriers are a promising "active" energy source, attracting increasing attention for their potential applications in photocatalysis and photodetection. Here, we hybridize plasmonic Au spherical nanoparticles (SNPs) with catalytically active Pt nanocrystals to form Au@Pt core-satellite nanoparticles (CSNPs), which act as both an efficient catalyst for plasmon-promoted decarboxylation reaction and a robust surface-enhanced Raman scattering (SERS) substrate for plasmon-enhanced molecular spectroscopic detection. By regulating the coverage of Pt nanocrystals on the Au SNPs, we modulated the "hotspot" structures of the Au@Pt CSNPs to optimize the SERS detecting capability and catalytic decarboxylation performance. The coupling functionalities enable us with unique opportunities to in-situ SERS monitor universal reactions catalyzed by active catalysts (e.g. Pt, Pd) in the chemical industry in real-time. The decarboxylation rate of 4-mercaptophenylacetic acid was dynamically controlled by the surface catalytic decarboxylation step, following first-order overall reaction kinetics. Moreover, the reaction rate exhibited a strong correlation with the local field enhancement |E/E0|4 of the hotspot structure. This work provides spectroscopic insights into the molecule-plasmon interface under the plasmon-promoted catalytic reactions, guiding the rational design of the plasmonic interface of nanocatalysts to achieve desired functionalities.

RESUMEN

We report a practical and sustainable electrophotochemical metal-catalyzed protocol for decarboxylative cyanation of simple aliphatic carboxylic acids. This environmentally friendly method features easy availability of substrates, broad functional group compatibility, and directly converts a diverse range of aliphatic carboxylic acids including primary and tertiary alkyl acids into synthetically versatile alkylnitriles without using chemical oxidants or costly cyanating reagents under mild reaction conditions.

RESUMEN

Phytocannabinoids occurring in Cannabis Sativa L. are unique secondary metabolites possessing interesting pharmacological activities. In this study, the dynamics of thermally induced (60 and 120 °C) phytocannabinoid reactions in four cannabis varieties were investigated. Using UHPLC-HRMS/MS, 40 phytocannabinoids were involved in target analysis, and an additional 281 compounds with cannabinoid-like structures and 258 non-cannabinoid bioactive compounds were subjected to suspect screening. As expected, the key reaction was the decarboxylation of acidic phytocannabinoids. Nevertheless, the rate constants differed among cannabis varieties, documenting the matrix-dependence of this process. Besides neutral counterparts of acidic species, ́new bioactive compounds such as hydroxyquinones were found in heated samples. In addition, changes in other bioactive compounds with both cannabinoid-like and non-cannabinoid structures were documented during cannabis heating at 120 °C. The data document the complexity of heat-induced processes and provide a further understanding of changes in bioactivities occurring under such conditions.

Asunto(s)

RESUMEN

The Pd-catalysed decarboxylative asymmetric allylic alkylation (DAAA) has been applied to the enantioselective synthesis of sterically hindered benzofuran-3(2H)-one-derived α-aryl-ß-keto esters employing the (R,R)-ANDEN phenyl Trost ligand. A range of substrates were synthesised, employing previously developed aryllead triacetate methodology to install various aryl groups. The resulting α-aryl-α-allyl benzofuran-3(2H)-one DAAA products were obtained in moderate to high yields and in enantioselectivities of up to 96 % ee, with the best results observed for substrates containing a di-ortho-substitution pattern on the aryl ring as well as naphthyl-containing substrates.

RESUMEN

The development of robust and reliable methods for the construction of C(sp2)-C(sp3) bonds is vital for accessing an increased array of structurally diverse scaffolds in drug discovery and development campaigns. While significant advances towards this goal have been achieved using metallaphotoredox chemistry, many of these methods utilise photocatalysts based on precious-metals due to their efficient redox processes and tuneable properties. However, due to the cost, scarcity, and toxicity of these metals, the search for suitable replacements should be a priority. Here, we show the use of commercially available heterogeneous semiconductor graphitic carbon nitride (gCN) as a photocatalyst, combined with nickel catalysis, for the cross-coupling between aryl halide and carboxylic acid coupling partners. gCN has been shown to engage in single-electron-transfer (SET) and energy-transfer (EnT) processes for the formation of C-X bonds, and in this manuscript we overcome previous limitations to furnish C-C over C-O bonds using carboxylic acids. A broad scope of both aryl halides and carboxylic acids is presented, and recycling of the photocatalyst demonstrated. The mechanism of the reaction is also investigated.

RESUMEN

An iron-catalyzed visible-light driven decarboxylative alkoxyamination is disclosed. In the presence of FeBr2 and TEMPO, a large array of carboxylic acids including marketed drugs and biobased molecules is turned into the corresponding alkoxyamine derivatives. The versatility of the latter offers an entry towards molecular diversity generation from abundant starting materials and catalyst. Overall, this method proposes a unified and general approach for LMCT-based iron-catalyzed decarboxylative functionalization.

RESUMEN

The iron(III) binding properties of citrate and rhizoferrin, a citrate containing siderophore, are compared. Citrate forms many oligonuclear complexes, whereas rhizoferrin forms a single mononuclear complex. The α-hydroxycarboxylate functional group, which is present in both citrate, and rhizoferrin, has a high affinity and selectivity for iron(III) under most biological conditions. The nature of the toxic form of iron found in the blood of patients suffering from many haemoglobinopathies and haemochromatosis is identified as a mixture of iron(III)citrate complexes. The significance of the presence of this iron pool to patients suffering from systemic iron overload is discussed. The wide utilisation of the α-hydroxycarboxylate functional group in siderophore structures is described, as is their photo-induced decarboxylation leading to the release of iron(II) ions. The importance of this facile dissociation to algal iron uptake is discussed.

RESUMEN

The transformation of biomasses from agro-industrial waste can significantly impact the production of green chemicals from sustainable resources. Pectin is a biopolymer present in lignocellulosic biomass as Orange Peel Waste (OPW) and has possibilities for making platform compounds such as furfural for sustainable chemistry. In this work, we studied the transformation to furfural of OPW, pectins, and D-galacturonic acid (D-GalA), which is the main component (65 wt%) of pectin. We analyzed pectins with different degrees of esterification (45, 60 and 95 DE) in a one-pot hydrolysis reaction system and studied the differences in depolymerization and dehydration of the carbohydrates. The results show that the production of furfural decreases as the DE value increases. Specifically, low DE values favor the formation of furfural since the decarboxylation reaction is favored over deesterification. Interestingly, the furfural concentration is dependent upon the polysaccharide composition of pentoses and uronic acid. The obtained concentrations of furfural (13 and 14 mmol/L), D-xylose (6.2 and 10 mmol/L), and L-arabinose (2.5 and 2.7 mmol/L) remained the same when the galacturonic acid was fed either as a polymer or a monomer under the same reaction conditions (0.01 M SA, 90 min and 433 K). OPW is proposed as a feedstock in a biorefinery, in which on a per kg OPW dry basis, 90 g of pectin and 15 g of furfural were produced in the most favorable case. We conclude that the co-production of pectin and furfural from OPW is economically feasible.

RESUMEN

Using a set of conformationally restricted Proline-derived Modules (ProMs), our group has recently succeeded in developing inhibitors for the enabled/vasodilator-stimulated phosphoprotein homology 1 (EVH1) domain, which is a key mediator of cell migration and plays an important role in tumor metastasis. While these (formally) pentapeptidic compounds show nanomolecular binding affinities towards EVH1, their drug-like properties and cell permeability need to be further optimized before they can be clinically tested as therapeutic agents against metastasis. In this study, we sought to improve these properties by removing the C-terminal carboxylic acid function of our peptoids, either by late-stage decarboxylation or by direct synthesis. For late-stage decarboxylation of ProM-like systems, a method for reductive halo decarboxylation was optimized and applied to several proline-derived substrates. In this way, a series of new decarboxy ProMs suitable as building blocks for decarboxy EVH1 inhibitors were obtained. In addition, we incorporated decarboxy-ProM-1 into the pentapeptide-like compound Ac[2ClF][ProM-2][Decarb-ProM-1], which showed similar affinity towards EVH1 as the methyl ester derivative (Ac[2Cl-F][ProM-2][ProM1]OMe). However, despite better calculated drug-like properties, this compound did not inhibit chemotaxis in a cellular assay.

Asunto(s)

RESUMEN

Development of photocatalytic systems that facilitate mechanistically divergent steps in complex catalytic manifolds by distinct activation modes can enable previously inaccessible synthetic transformations. However, multimodal photocatalytic systems remain understudied, impeding their implementation in catalytic methodology. We report herein a photocatalytic access to thiols that directly merges the structural diversity of carboxylic acids with the ready availability of elemental sulfur without substrate preactivation. The photocatalytic transformation provides a direct radical-mediated segue to one of the most biologically important and synthetically versatile organosulfur functionalities, whose synthetic accessibility remains largely dominated by two-electron-mediated processes based on toxic and uneconomical reagents and precursors. The two-phase radical process is facilitated by a multimodal catalytic reactivity of acridine photocatalysis that enables both the singlet excited state PCET-mediated decarboxylative carbon-sulfur bond formation and the previously unknown radical reductive disulfur bond cleavage by a photoinduced HAT process in the silane-triplet acridine system. The study points to a significant potential of multimodal photocatalytic systems in providing unexplored directions to previously inaccessible transformations.