RESUMEN

Anti-viral surface coatings are under development to prevent viral fomite transmission from high-traffic touch surfaces in public spaces. Copper's anti-viral properties have been widely documented, but the anti-viral mechanism of copper surfaces is not fully understood. We screened a series of metal and metal oxide surfaces for anti-viral activity against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of coronavirus disease (COVID-19). Copper and copper oxide surfaces exhibited superior anti-SARS-CoV-2 activity; however, the level of anti-viral activity was dependent on the composition of the carrier solution used to deliver virus inoculum. We demonstrate that copper ions released into solution from test surfaces can mediate virus inactivation, indicating a copper ion dissolution-dependent anti-viral mechanism. The level of anti-viral activity is, however, not dependent on the amount of copper ions released into solution per se. Instead, our findings suggest that degree of virus inactivation is dependent on copper ion complexation with other biomolecules (e.g., proteins/metabolites) in the virus carrier solution that compete with viral components. Although using tissue culture-derived virus inoculum is experimentally convenient to evaluate the anti-viral activity of copper-derived test surfaces, we propose that the high organic content of tissue culture medium reduces the availability of "uncomplexed" copper ions to interact with the virus, negatively affecting virus inactivation and hence surface anti-viral performance. We propose that laboratory anti-viral surface testing should include virus delivered in a physiologically relevant carrier solution (saliva or nasal secretions when testing respiratory viruses) to accurately predict real-life surface anti-viral performance when deployed in public spaces.IMPORTANCEThe purpose of evaluating the anti-viral activity of test surfaces in the laboratory is to identify surfaces that will perform efficiently in preventing fomite transmission when deployed on high-traffic touch surfaces in public spaces. The conventional method in laboratory testing is to use tissue culture-derived virus inoculum; however, this study demonstrates that anti-viral performance of test copper-containing surfaces is dependent on the composition of the carrier solution in which the virus inoculum is delivered to test surfaces. Therefore, we recommend that laboratory surface testing should include virus delivered in a physiologically relevant carrier solution to accurately predict real-life test surface performance in public spaces. Understanding the mechanism of virus inactivation is key to future rational design of improved anti-viral surfaces. Here, we demonstrate that release of copper ions from copper surfaces into small liquid droplets containing SARS-CoV-2 is a mechanism by which the virus that causes COVID-19 can be inactivated.

Asunto(s)

RESUMEN

The identity of the rate-determining step (RDS) in the electrochemical CO reduction reaction (CORR) on Cu catalysts remains unresolved because: 1) the presence of mass transport limitation of CO; and 2) the absence of quantitative correlation between CO partial pressure (pCO ) and surface CO coverage. In this work, we determined CO adsorption isotherms on Cu in a broad pH range of 7.2-12.9. Together with electrokinetic data, we demonstrate that the reaction orders of adsorbed CO at pCO <0.4 and >0.6 atm are 1st and 0th , respectively, for multi-carbon (C2+ ) products on three Cu catalysts. These results indicate that the C-C coupling is unlikely to be the RDS in the formation of C2+ products in the CORR. We propose that the hydrogenation of CO with adsorbed water is the RDS, and the site competition between CO and water leads to the observed transition of the CO reaction order.

Asunto(s)

RESUMEN

Recent reports on antimicrobial effects of metallic Cu prompted this study of anaerobic microbial communities on copper surfaces. Widely circulating copper-containing coinage was used as a potential source for microorganisms that had had human contact and were tolerant to copper. This study reports on the isolation, characterization, and genome of an anaerobic sulfidogenic Tissierella sp. P1from copper-containing brass coinage. Dissimilatory (bi)sulfite reductase dsrAB present in strain P1 genome and the visible absorbance around 630 nm in the cells suggested the presence of a desulfoviridin-type protein. However, the sulfate reduction rate measurements with 35SO42- did not confirm the dissimilatory sulfate reduction by the strain. The P1 genome lacks APS reductase, sulfate adenylyltransferase, DsrC, and DsrMK necessary for dissimilatory sulfate reduction. The isolate produced up to 0.79 mM H2S during growth, possibly due to cysteine synthase (CysK) and/or cysteine desulfhydrase (CdsH) activities, encoded in the genome. The strain can tolerate up to 2.4 mM Cu2+(150 mg/l) in liquid medium, shows affinity to metallic copper, and can survive on copper-containing coins up to three days under ambient air and dry conditions. The genome sequence of strain P1 contained cutC, encoding a copper resistance protein, which distinguishes it from all other Tissierella strains with published genomes.

Asunto(s)

RESUMEN

BACKGROUND: Hospital surfaces are considered important vectors in the spread of nosocomial pathogens. This study evaluated microbial counts on novel antimicrobial bedrail covers over a 2-week period in a critical care environment. METHODS: Disposable bedrail covers (Aionx Inc, Hershey, PA) made of a copper and silver polymer and capable of conducting an imperceptible surface potential, were installed in a case-control manner on a series of occupied intensive care unit beds. Seventeen bedrails were covered with the study bedrail surface, and 17 were left uncovered. Two hundred seventy-two microbial surface cultures were obtained from both study and control bedrails and analyzed for microbial growth by bacterial enumeration and speciation. RESULTS: The bedrails covered with the study surface demonstrated >80% average decrease in colony forming units across the study period of 15 days. CONCLUSIONS: These novel, detachable bedrail covers successfully demonstrated significant bacterial count reduction in an intensive care unit setting. This may have implications for acquisition of hospital-acquired infections.

Asunto(s)

RESUMEN

Copper surfaces possess efficient antimicrobial effect. Here, we reported that copper surfaces could inactivate Candida albicans biofilms within 40 min. The intracellular reactive oxygen species in C. albicans biofilms were immediately stimulated during the contact of copper surfaces, which might be an important factor for killing the mature biofilms. Copper release assay demonstrated that the copper ions automatically released from the surface of 1 mm thick copper coupons with over 99.9% purity are not the key determinant for the copper-mediated killing action. The susceptibility test to copper surfaces by using C. albicans mutant strains, which were involved in efflux pumps, adhesins, biofilms formation or osmotic stress response showed that als1/als1 and als3/als3 displayed higher resistance to the copper surface contact than other mutants did. The intracellular concentration of copper ions was lower in als1/als1 and als3/als3 than that in wild-type strain. Transcriptional analysis revealed that the expression of copper transporter-related gene, CRP1, was significantly increased in als1/als1, als3/als3, suggesting a potential role of ALS1 and ALS3 in absorbing ions by regulating the expression of CRP1 This study provides a potential application in treating pathogenic fungi by using copper surfaces and uncovers the roles of ALS1 and ALS3 in absorbing copper ions for C. albicans.

Asunto(s)

RESUMEN

A synthetic approach for high-quality graphene on rough Cu surfaces via chemical vapor deposition is proposed. High-quality graphene is synthesized on rough Cu surfaces by inducing surface faceting of Cu surfaces prior to graphene growth. The electron mobility of synthesized graphene on the rough Cu surfaces is enhanced to 10 335 cm(2) V(-1) s(-1).

RESUMEN

Contamination of the healthcare environment with pathogenic organisms contributes to the burden of healthcare-associated infection (HCAI). Antimicrobial surfaces are designed to reduce microbial contamination of healthcare surfaces. We aimed to determine whether antimicrobial surfaces prevent HCAI, transmission of antibiotic-resistant organisms (AROs), or microbial contamination, we conducted a systematic review of the use of antimicrobial surfaces in patient rooms. Outcomes included HCAI, ARO, and quantitative microbial contamination. Relevant databases were searched. Abstract review, full text review, and data abstraction were performed in duplicate. Risk of bias was assessed using the Cochrane Effective Practice and Organization Care (EPOC) Group risk of bias assessment tool and the strength of evidence determined using Grading of Recommendations Assessment, Development and Evaluation (GRADE). Eleven studies assessed the effect of copper (N = 7), silver (N = 1), metal-alloy (N = 1), or organosilane-treated surfaces (N = 2) on microbial contamination. Copper surfaces demonstrated a median (range) reduction of microbial contamination of <1 log10 (<1 to 2 log10). Two studies addressed HCAI/ARO incidence. An RCT of copper surfaces in an ICU demonstrated 58% reduction in HCAI (P = 0.013) and 64% reduction in ARO transmission (P = 0.063) but was considered low-quality evidence due to improper randomization and incomplete blinding. An uncontrolled before-after study evaluating copper-impregnated textiles in a long-term care ward demonstrated 24% reduction in HCAI but was considered very-low-quality evidence based on the study design. Copper surfaces used in clinical settings result in modest reductions in microbial contamination. One study of copper surfaces and one of copper textiles demonstrated reduction in HCAI, but both were at high risk of bias.

Asunto(s)

RESUMEN

Homocouplings of hydrocarbon groups including alkynyl (sp(1) ), alkyl (sp(3) ), and aryl (sp(2) ) have recently been investigated on surfaces with the interest of fabricating novel carbon nanostructures/nanomaterials and getting fundamental understanding. Investigated herein is the on-surface homocoupling of an alkenyl group which is the last elementary unit of hydrocarbons. Through real-space direct visualization (scanning tunneling microscopy imaging) and density functional theory calculations, the two terminal alkenyl groups were found to couple into a diene moiety on copper surfaces, and is contrary to the common dimerization products of alkenes in solution. Furthermore, detailed DFT-based transition-state searches were performed to unravel this new reaction pathway.

RESUMEN

Copper kills bacteria rapidly by a mechanism that is not yet fully resolved. The antibacterial property of copper has raised interest in its use in hospitals, in place of plastic or stainless steel. On the latter surfaces, bacteria can survive for days or even weeks. Copper surfaces could thus provide a powerful accessory measure to curb nosocomial infections. We here investigated the effect of the copper surface structure on the efficiency of contact killing of Escherichia coli, an aspect which so far has received very little attention. It was shown that electroplated copper surfaces killed bacteria more rapidly than either polished copper or native rolled copper. The release of ionic copper was also more rapid from electroplated copper compared to the other materials. Scanning electron microscopy revealed that the bacteria nudged into the grooves between the copper grains of deposited copper. The findings suggest that, in terms of contact killing, more efficient copper surfaces can be engineered.

Asunto(s)

RESUMEN

Our results indicate that small amounts of an oxide deposited on a stable metal surface can trigger a massive surface reconstruction under reaction conditions. In low-energy electron microscopy (LEEM) experiments, no reconstruction of Cu(111) is observed after chemisorbing oxygen or after reducing O/Cu(111) in a CO atmosphere. On the other hand, LEEM images taken in situ during the reduction of CeO2/CuO1-x/Cu(111) show a complex nonuniform transformation of the surface morphology. Ceria particles act as nucleation sites for the growth of copper microterraces once CuO1-x is reduced. Can this reconstructed surface be used to enhance the catalytic activity of inverse oxide/metal catalysts? Indeed, CeOx on reconstructed Cu(111) is an extremely active catalyst for the water-gas shift process (CO + H2O → H2 + CO2), with the Cu microterraces providing very efficient sites for the dissociation of water and subsequent reaction with CO.