RESUMEN
A vast majority of electrical devices have integrated magnetic units, which generate constant magnetic fields with noticeable vibrations. The majority of existing nanogenerators acquire energy through friction/mechanical forces and most of these instances overlook acoustic vibrations and magnetic fields. Magnetic two-dimensional (2D) tellurides present a wide range of possibilities for devising a potential flexible energy harvester. 2D chromium telluride (2D CrTe3) is synthesized, which exhibits ferromagnetic behavior with a higher T c of ≈224 K. The structure exhibits stable high remnant magnetization, making 2D CrTe3 a potential material for harvesting magneto-acoustic waves. A magneto-acoustic nanogenerator (MANG) is fabricated and the basic mechanical stability and sensitivity of the device with change in load conditions are tested. A high surface charge density of 2.919 mC m-2 is obtained for the device. The thermal strain created in the lattice structure is examined using in-situ Raman spectroscopy. The magnetic anisotropy energy (MAE) responsible for long-range FM ordering is calculated by theoretical modelling with insights into opening of electronic bandgap which enhances the flexoelectric effects. The MANG can be a potential NG to synergistically tap into the magneto-acoustic vibrations generated from the frequency changes of a vibrating device such as loudspeakers.
RESUMEN
Intrinsic magnetism in van der Waals materials has instigated interest in exploring magnetism in the 2D limit for potential applications in spintronics and also in understanding novel control of 2D magnetism via variation of layer thickness, gate tunability and magnetoelectric effects. The chromium telluride (CrxTey) family is an interesting subsection of ferromagnetic materials with highTCvalues, also presenting diverse stoichiometry arising from self-intercalation of Cr. Apart from the layered CrTe2system, the other non-layered CrxTeycompounds also offer exceptional magnetic properties, and a novel growth technique to grow thin films of these non-layered compounds offers exciting possibilities for ultra-thin spin-based electronics and magnetic sensors. In this work, we discuss the role of crystalline substrates in chemical vapor deposition growth of non-layered 2D ferromagnets, where the crystal symmetry of the substrate as well as the misfit and strain are the key players governing the growth mechanism of ultra-thin Cr5Te8, a non-layered ferromagnet. The magnetic studies of the as-grown Cr5Te8reveal the signatures of co-existing soft and hard ferromagnetic phases, which makes this system an intriguing system to search for emergent topological phases, such as magnetic skyrmions.
RESUMEN
This study reports the synthesis and crystal structure determination of a novel CrTe3 phase using various experimental and theoretical methods. The average stoichiometry and local phase separation of this quenched high-pressure phase were characterized by ex situ synchrotron powder X-ray diffraction and total scattering. Several structural models were obtained using simulated annealing, but all suffered from an imperfect Rietveld refinement, especially at higher diffraction angles. Finally, a novel stoichiometrically correct crystal structure model was proposed on the basis of electron diffraction data and refined against powder diffraction data using the Rietveld method. Scanning electron microscopy-energy-dispersive X-ray spectrometry (EDX) measurements verified the targeted 1:3 (Cr:Te) average stoichiometry for the starting compound and for the quenched high-pressure phase within experimental errors. Scanning transmission electron microscopy (STEM)-EDX was used to examine minute variations of the Cr-to-Te ratio at the nanoscale. Precession electron diffraction (PED) experiments were applied for the nanoscale structure analysis of the quenched high-pressure phase. The proposed monoclinic model from PED experiments provided an improved fit to the X-ray patterns, especially after introducing atomic anisotropic displacement parameters and partial occupancy of Cr atoms. Atomic resolution STEM and simulations were conducted to identify variations in the Cr-atom site-occupancy factor. No significant variations were observed experimentally for several zone axes. The magnetic properties of the novel CrTe3 phase were investigated through temperature- and field-dependent magnetization measurements. In order to understand these properties, auxiliary theoretical investigations have been performed by first-principles electronic structure calculations and Monte Carlo simulations. The obtained results allow the observed magnetization behavior to be interpreted as the consequence of competition between the applied magnetic field and the Cr-Cr exchange interactions, leading to a decrease of the magnetization towards T = 0â K typical for antiferromagnetic systems, as well as a field-induced enhanced magnetization around the critical temperature due to the high magnetic susceptibility in this region.
RESUMEN
Metallic ferromagnetic transition metal dichalcogenides have emerged as important building blocks for scalable magnetic and memory applications. Downscaling such systems to the ultrathin limit is critical to integrate them into technology. Here, we achieved layer-by-layer control over the transition metal dichalcogenide Cr1.6Te2 by using pulsed laser deposition, and we uncovered the minimum critical thickness above which room-temperature magnetic order is maintained. The electronic and magnetic structures are explored experimentally and theoretically, and it is shown that the films exhibit strong in-plane magnetic anisotropy as a consequence of large spin-orbit effects. Our study elucidates both magnetic and electronic properties of Cr1.6Te2 and corroborates the importance of intercalation to tune the magnetic properties of nanoscale materials' architectures.
RESUMEN
Room-temperature magnetic skyrmion materials exhibiting robust topological Hall effect (THE) are crucial for novel nano-spintronic devices. However, such skyrmion-hosting materials are rare in nature. In this study, a self-intercalated transition metal dichalcogenide Cr1+ x Te2 with a layered crystal structure that hosts room-temperature skyrmions and exhibits large THE is reported. By tuning the self-intercalate concentration, a monotonic control of Curie temperature from 169 to 333 K and a magnetic anisotropy transition from out-of-plane to the in-plane configuration are achieved. Based on the intercalation engineering, room-temperature skyrmions are successfully created in Cr1.53 Te2 with a Curie temperature of 295 K and a relatively weak perpendicular magnetic anisotropy. Remarkably, a skyrmion-induced topological Hall resistivity as large as ≈106 nΩ cm is observed at 290 K. Moreover, a sign reversal of THE is also found at low temperatures, which can be ascribed to other topological spin textures having an opposite topological charge to that of the skyrmions. Therefore, chromium telluride can be a new paradigm of the skyrmion material family with promising prospects for future device applications.
RESUMEN
In a conventional magnetic material, a long-range magnetic order develops in three dimensions, and reducing a layer number weakens its magnetism. Here we demonstrate anomalous layer-number-independent ferromagnetism down to the two-dimensional (2D) limit in a metastable phase of Cr3Te4. We fabricated Cr3Te4 thin films by molecular-beam epitaxy and found that Cr3Te4 could host two distinct ferromagnetic phases characterized with different Curie temperatures (TC). One is the bulk-like "high-TC phase" showing room-temperature ferromagnetism, which is consistent with previous studies. The other is the metastable "low-TC phase" with TC ≈ 160 K, which exhibits a layer-number-independent TC down to the 2D limit in marked contrast with the conventional high-TC phase, demonstrating a purely 2D nature of its ferromagnetism. Such significant differences between two distinct phases could be attributed to a small variation in the doping level, making this material attractive for future ultracompact spintronics applications with potential gate-tunable room-temperature 2D ferromagnetism.
RESUMEN
Ultrathin van der Waals (vdW) magnets are heavily pursued for potential applications in developing high-density miniaturized electronic/spintronic devices as well as for topological physics in low-dimensional structures. Despite the rapid advances in ultrathin ferromagnetic vdW magnets, the antiferromagnetic counterparts, as well as the antiferromagnetic junctions, are much less studied owing to the difficulties in both material fabrication and magnetism characterization. Ultrathin CrTe3 layers have been theoretically proposed to be a vdW antiferromagnetic semiconductor with intrinsic intralayer antiferromagnetism. Herein, the epitaxial growth of monolayer (ML) and bilayer CrTe3 on graphite surface is demonstrated. The structure, electronic and magnetic properties of the ML CrTe3 are characterized by combining scanning tunneling microscopy/spectroscopy and non-contact atomic force microscopy and confirmed by density functional theory calculations. The CrTe3 MLs can be further utilized for the fabrication of a lateral heterojunction consisting of ML CrTe2 and ML CrTe3 with an atomically sharp and seamless interface. Since ML CrTe2 is a metallic vdW magnet, such a heterostructure presents the first in-plane magnetic metal-semiconductor heterojunction made of two vdW materials. The successful fabrication of ultrathin antiferromagnetic CrTe3 , as well as the magnetic heterojunction, will stimulate the development of miniaturized antiferromagnetic spintronic devices based on vdW materials.
RESUMEN
The emergence of van der Waals (vdW) magnets has created unprecedented opportunities to manipulate magnetism for advanced spintronics based upon all-vdW heterostructures. Among various vdW magnets, Cr1+δTe2 possesses high temperature ferromagnetism along with possible topological spin textures. As this system can support self-intercalation in the vdW gap, it is crucial to precisely pinpoint the exact intercalation to understand the intrinsic magnetism of the system. Here, we developed an iterative method to determine the self-intercalated structures and show evidence of vdW "superstructures" in individual Cr1+δTe2 nanoplates exhibiting magnetic behaviors distinct from bulk chromium tellurides. Among 26,332 possible configurations, we unambiguously identified the Cr-intercalated structure as 3-fold symmetry broken Cr1.5Te2 segmented by vdW gaps. Moreover, a twisted Cr-intercalated layered structure is observed. The spontaneous formation of twisted vdW "superstructures" not only provides insight into the diverse magnetic properties of intercalated vdW magnets but may also add complementary building blocks to vdW-based spintronics.
RESUMEN
The realization of long-range magnetic ordering in 2D systems can potentially revolutionize next-generation information technology. Here, the successful fabrication of crystalline Cr3 Te4 monolayers with room temperature (RT) ferromagnetism is reported. Using molecular beam epitaxy, the growth of 2D Cr3 Te4 films with monolayer thickness is demonstrated at low substrate temperatures (≈100 °C), compatible with Si complementary metal oxide semiconductor technology. X-ray magnetic circular dichroism measurements reveal a Curie temperature (Tc ) of v344 K for the Cr3 Te4 monolayer with an out-of-plane magnetic easy axis, which decreases to v240 K for the thicker film (≈7 nm) with an in-plane easy axis. The enhancement of ferromagnetic coupling and the magnetic anisotropy transition is ascribed to interfacial effects, in particular the orbital overlap at the monolayer Cr3 Te4 /graphite interface, supported by density-functional theory calculations. This work sheds light on the low-temperature scalable growth of 2D nonlayered materials with RT ferromagnetism for new magnetic and spintronic devices.
RESUMEN
The discovery of atomically thin van der Waals magnets (e.g., CrI3 and Cr2Ge2Te6) has triggered a renaissance in the study of two-dimensional (2D) magnetism. Most of the 2D magnetic compounds discovered so far host only one single magnetic phase unless the system is at a phase boundary. In this work, we report the near degeneracy of magnetic phases in ultrathin chromium telluride (Cr2Te3) layers with strong perpendicular magnetic anisotropy highly desired for stabilizing 2D magnetic order. Single-crystalline Cr2Te3 nanoplates with a trigonal structure (space group P3Ì 1c) were grown by chemical vapor deposition. The bulk magnetization measurements suggest a ferromagnetic (FM) order with an enhanced perpendicular magnetic anisotropy, as evidenced by a coercive field as large as â¼14 kOe when the field is applied perpendicular to the basal plane of the thin nanoplates. Magneto-optical Kerr effect studies confirm the intrinsic ferromagnetism and characterize the magnetic ordering temperature of individual nanoplates. First-principles density functional theory calculations suggest the near degeneracy of magnetic orderings with a continuously varying canting from the c-axis FM due to their comparable energy scales, explaining the zero-field kink observed in the magnetic hysteresis loops. Our work highlights Cr2Te3 as a promising 2D Ising system to study magnetic phase coexistence and switches for ultracompact information storage and processing.
RESUMEN
Topological Hall effect is an abnormal Hall response arising from the scalar spin chirality of chiral magnetic textures. Up to now, such an effect is only observed in certain special materials, but rarely in traditional ferromagnets. In this work, we have implemented the molecular beam epitaxy technique to successfully embed black-phosphorus-like bismuth nanosheets with strong spin-orbit coupling into the bulk of chromium telluride Cr2Te3, as evidenced by atomically resolved energy dispersive X-ray spectroscopy mapping. Distinctive from pristine Cr2Te3, these Bi-embedded Cr2Te3 epitaxial films exhibit not only pronounced topological Hall effects, but also magnetoresistivity anomalies and differential magnetic susceptibility plateaus. All these experimental features point to the possible emergence of magnetic skyrmions in Bi-embedded Cr2Te3, which is further supported by our numerical simulations with all input parameters obtained from the first-principle calculations. Therefore, our work demonstrates a new efficient way to induce skyrmions in ferromagnets, as well as the topological Hall effect by embedding nanosheets with strong spin-orbit couplings.
RESUMEN
Reflection high-energy electron diffraction (RHEED), scanning tunneling microscopy (STM), vibrating sample magnetometry, and other physical property measurements are used to investigate the structure, morphology, magnetic, and magnetotransport properties of (001)-oriented Cr2Te3 thin films grown on Al2O3(0001) and Si(111)-(7×7) surfaces by molecular beam epitaxy. Streaky RHEED patterns indicate flat smooth film growth on both substrates. STM studies show the hexagonal arrangements of surface atoms. Determination of the lattice parameter from the atomically resolved STM image is consistent with the bulk crystal structures. Magnetic measurements show the film is ferromagnetic, having a Curie temperature of about 180 K, and a spin glass-like behavior was observed below 35 K. Magnetotransport measurements show the metallic nature of the film with a perpendicular magnetic anisotropy along the c-axis.