RESUMEN

The present study investigates the utilization of a supramolecular deep eutectic solvent (SUPRADES), consisting of sulfated-ß-cyclodextrin (S-ß-CD) and citric acid (CA), as a chiral selector (CS) in capillary electrophoresis for the enantiomeric separation of nefopam (NEF) and five cathinone derivatives (3-methylmethcathinone [3-MMC], 4-methylmethcathinone [4-MMC], 3,4-dimethylmethcathinone [3,4-DMMC], 4-methylethcathinone [4-MEC], and 3,4-methylendioxycathinone [MDMC]). A significant improvement in enantiomeric separation of the target analytes was observed upon the addition of S-ß-CD-CA to the background electrolyte (BGE), leading to a baseline separation of all analytes. In particular, the optimum percentage of S-ß-CD-CA, added to the BGE, was determined to be 0.075% v/v for NEF (Rs = 1.5) and 0.050% v/v for three out of five cathinone derivatives (Rs = 1.5, 1.6, and 2.4 for 3-MMC, 4-MEC, and 3,4-DMMC, respectively). In the case of 4-MMC and MDMC, a higher percentage of the CS, equal to 0.075% and 0.10% v/v, respectively, was required to achieve baseline separation (Rs = 1.5, 1.9 for MDMC and 4-MMC, respectively). The outcomes of the present study highlight the potential effectiveness of using SUPRADES as a CS in electrophoretic enantioseparations.

RESUMEN

The stereospecific analysis of chiral molecules is an important issue in many scientific fields. In separation sciences, this is achieved via the formation of transient diastereomeric complexes between a chiral selector and the selectand enantiomers driven by molecular interactions including electrostatic, ion-dipole, dipole-dipole, van der Waals or π-π interactions as well as hydrogen or halogen bonds depending on the nature of selector and selectand. Nuclear magnetic resonance spectroscopy and molecular modeling methods are currently the most frequently applied techniques to understand the selector-selectand interactions at a molecular level and to draw conclusions on the chiral separation mechanism. The present short review summarizes some of the recent achievements for the understanding of the chiral recognition of the most important chiral selectors combining separation techniques with molecular modeling and/or spectroscopic techniques dating between 2020 and early 2024. The selectors include polysaccharide derivatives, cyclodextrins, macrocyclic glycopeptides, proteins, donor-acceptor type selectors, ion-exchangers, crown ethers, and molecular micelles. The application of chiral ionic liquids and chiral deep eutectic solvents, as well as further selectors, are also briefly addressed. A compilation of all published literature on chiral selectors has not been attempted.

RESUMEN

In this paper, the development and application of a multiple heart-cutting achiral-chiral LC-LC method (mLC-LC) for the analysis of dansylated (Dns) branched-chain amino acids in commercial tablets are described. In the first dimension, a Waters Xbridge RP C18 achiral column was used under gradient conditions with buffered aqueous solution and acetonitrile. The elution order Dns-valine (Dns-Val) < Dns-isoleucine (Dns-Ile) < Dns-leucine (Dns-Leu) turned out with full resolution between adjacent peaks: 7.25 and 1.50 for the Val/Ile and the Ile/Leu pairs, respectively. A "research" validation study was performed, revealing high accuracy (Recovery%) and precision (RSD%) using two external set solutions, respectively, in the range 93.7%-104.1% and 0.4%-3.2%. The C18 column was connected via a two-position six-port switching valve to the quinidine-based Chiralpak quinidine-anion-exchange chiral column. A water/acetonitrile, 30/70 (v/v) with 50 mM ammonium acetate (apparent pH of 5.5) eluent allowed getting the three enantiomers' pairs resolved: RS equal to 4.3 for Dns-Val and Dns-Ile, and 1.7 for Dns-Leu. The application of the mLC-LC method confirmed that the content of Val, Ile, and Leu in the tablets was compliant with that labeled by the producer. Only l-enantiomers were found in the food supplement, as confirmed by LC-MS/MS analysis.

Asunto(s)

RESUMEN

Considering the substantial significance of chiral biomolecules, such as amino acids, in our daily routines, we performed chiral recognition and discrimination of tyrosine (Tyr) enantiomers on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid [(-)-18-C-6-TA] as crown-ether type chiral selector (CS) by nuclear magnetic resonance (NMR) spectroscopy and docking simulations. In this study, successful discrimination of the enantiomers of Tyr was achieved, as evidenced by the proton chemical shift differences (ΔΔδ) of Tyr enantiomers observed in the 1 H NMR spectra with (-)-18-C-6-TA CS. We compared the results of these two techniques with the findings obtained from high performance liquid chromatography (HPLC) investigations. In both NMR and HPLC experimental and docking simulation studies, a stronger interaction between the L-Tyr enantiomer with (-)-18-C-6-TA CS than the D-Tyr was consistently observed. Also, the binding energy differences (ΔΔEL-D ) found in simulation data that correspond to enantioselectivity aligned well with the NMR experimental result.

Asunto(s)

RESUMEN

In this study, a novel supramolecular deep eutectic solvent consisting of sulfated-ß-CD and citric acid (S-ß-CD-CA) is reported for the first time. This innovative system was evaluated as a sole chiral selector in capillary electrophoresis for the enantioseparation of six fluorine-substituted amphetamine analogs, yielding remarkable outcomes. Baseline separations of all amphetamine analogs under study were achieved in less than 21.00 min using the S-ß-CD-CA as the chiral selector. It was observed that the addition of 0.050 % v/v S-ß-CD-CA into the background electrolyte resulted in the baseline separation of five out of the six fluorine-substituted amphetamine analogs, while in the case of the para-substituted amphetamine analog, 4-fluoramphetamine (4-FA), a higher percentage (0.15 % v/v) was required to achieve baseline enantioseparation. These findings emphasized the potential of this new supramolecular system in providing a class of solvents with promising chiral recognition properties.

Asunto(s)

RESUMEN

Three sets of fluorinated chiral liquid crystals were used to explore the polar organic solvent chromatography mode for their enantioseparation. The materials include a set of newly synthesized compounds with chiral center derived from 2-hexanol and two sets of compounds with chiral center derived from 2-/3-octanol. Baseline enantioseparation of all materials was achieved using binary mobile phases without additives. For some of the compounds exceedingly high values of enantioresolution (> 20) and enantioselectivity (> 4) were found. The chromatographic behavior of the sample set was studied on three different polysaccharide-based chiral columns - Chiralpak IA-U, IG-U and IB-U. Comparison of results from Chiralpak IA-U and IB-U shows the effect of amylose vs. cellulose polysaccharide backbone while comparison of Chiralpak IA-U and IG-U reveals the effect of 3,5-dimethylphenylcarbamate vs. 3­chloro-5-methylphenylcarbamate substituent. The mobile phases tested included whole range of acetonitrile/methanol mixtures to demonstrate that acetonitrile-rich and alcohol-rich mobile phases offer different enantiorecognition mechanisms and can provide complementarity to some extent. The effect of temperature on enantioseparation was investigated on Chiralpak IA-U by constructing van't Hoff plots for selected liquid crystals in pure acetonitrile and pure methanol as mobile phases.

RESUMEN

For decades now, the separation of chiral enantiomers of drugs has been gaining the interest and attention of researchers. In 1991, the first guidelines for development of chiral drugs were firstly released by the US-FDA. Since then, the development in chromatographic enantioseparation tools has been fast and variable, aiming at creating a suitable environment where the physically and chemically identical enantiomers can be separated. Among those tools, the immobilization of chiral selectors (CS) on different stationary phases and the chiral mobile phase additives (CMPA) which have been progressed and studied extensively. This review article highlights the major advances in immobilization of CS together with their different recognition mechanisms as well as CMPA as a cheaper and successful alternative for chiral stationary phases. Moreover, the role of molecular modeling tool as a pre-step in the choice of CS for evaluating possible interactions with different ligands has been pointed up. Illustrations of reported methods and updates for immobilized CS and CMPA have been included.

Asunto(s)

RESUMEN

This study describes the enantioseparation of three chiral amines as naphthaldimine derivatives, using normal phase HPLC with amylose and cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases (CSPs). Three chiral amines were derivatized using three structurally similar naphthaldehyde derivatizing agents, and the enantioselectivity of the CSPs toward the derivatives was examined. The degree of enantioseparation and resolution was affected by the amylose or cellulose-derived CSPs and aromatic moieties as well as a kind of chiral amine. Especially, efficient enantiomer separation was observed for 2-hydroxynapthaldimine derivatives on cellulose-derived CSPs. Molecular docking studies of three naphthaldimine derivatives of leucinol on cellulose tris(3,5-dimethylphenylcarbamate) were performed to estimate the binding energies and conformations of the CSP-analyte complexes. The obtained binding energies were in good agreement with the experimentally determined enantioseparation and elution order.

Asunto(s)

RESUMEN

A novel approach for the separation of ketorolac enantiomers by capillary electrophoresis is presented. A cationic ß-cyclodextrin derivative based on imidazole was synthesized and used as a chiral selector in the background electrolyte. The influence of pH and ionic strength of background electrolyte, as well as cationic ß-cyclodextrin derivative concentration on the resolution of ketorolac enantiomers, was investigated. The highest value of the resolution for ketorolac enantiomers was 1.46 when the background electrolyte consisted of 25 mM NaH2 PO4 (pH 6.4) with 1 mM 1-butyl-3-ß-cyclodextrinimidazolium tosylate. Additionally, the possibilities of cationic derivatives for the separation of ketoprofen enantiomers were shown (peak resolution 1.06). The two-step preconcentration mode was developed to reduce the limit of detection of individual enantiomers. The proposed approach was successfully applied to determine ketorolac enantiomers in tablet "Ketorol express" and human plasma. The calibration range of ketorolac enantiomers for plasma samples was 0.25-2.50 µg/ml with coefficients of determination ≥ 0.99. The relative standard deviation both of the peak area and migration time was less than 15%, as well as the accuracy ranged from 90.1% to 110.2% for both analytes. The limits of detection were 44 and 55 ng/ml for R- and S-ketorolac. The quantity of ketorolac in plasma was verified with high-performance liquid chromatography.

Asunto(s)

RESUMEN

Noscapine is an isolated compound from the opium poppy, with distinctive chiral structure and chemistry, interacts with other compounds due to having multiple π-acceptors, hydrogen bond acceptors, and ionic sites. Therefore, it has promising applicability for the enantioselective separation of a wide range of polar, acidic, basic, and neutral compounds. A new noscapine derivative chiral stationary phase (ND-CSP) has been synthesized by consecutive N-demethylation, reduction, and N-propargylation of noscapine followed by attachment of a solid epoxy-functionalized silica bed through the 1,3-dipolar Huisgen cycloaddition. The noscapine derivative-based stationary phase provides a considerable surface coverage, which is greater than some commercial CSPs and can validate better enantioresolution performance. The major advantages inherent to this chiral selector are stability, reproducibility after more than 200 tests, and substantial loading capacity. The characterization by Fourier transform infrared (FTIR) spectroscopy and elemental analysis indicated successful functionalization of the silica surface. Chromatographic method conditions like flow rate and mobile phase composition for enantioseparation of various compounds such as warfarin, propranolol, mandelic acid, and a sulfanilamide derivative were optimized. Comparing the experimental results with docking data revealed a clear correlation between the calculated binding energy of ND-CSP and each enantiomer with the resolution of enantiomer peaks.

Asunto(s)

RESUMEN

Optically active linear polyimides and hyperbranched poly (amic acid-imide) were prepared by using procedures varying in particular in the maximum temperature employed in their synthesis. The two types of linear polyimides were based on 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and 1,2-diaminocylohexane enantiomers or 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and 2,2'-diamino-1,1'-binaphthalene enantiomers. The amine-terminated hyperbranched poly (amic acid-imide) was prepared from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and 4,4',4″-triaminotriphenylmethane, and its end groups were modified with the chiral selectors N-acetyl-D-phenylalanine or N-acetyl-L-phenylalanine. The final structure of the products was analyzed by IR spectroscopy, and their optical activity was evaluated and confirmed by polarimetry or circular dichroism.

Asunto(s)

RESUMEN

Chiral compounds are ubiquitous in nature and play a pivotal role in biochemical processes, in chiroptical materials and applications, and as chiral drugs. The analysis and determination of the enantiomeric ratio (er) of chiral compounds is of enormous scientific, industrial, and economic importance. Chiral separation techniques and methods have become indispensable tools to separate chiral compounds into their enantiomers on an analytical as well on a preparative level to obtain enantiopure compounds. Chiral gas chromatography and high-performance liquid chromatography have paved the way and fostered several research areas, that is, asymmetric synthesis and catalysis in organic, medicinal, pharmaceutical, and supramolecular chemistry. The development of highly enantioselective chiral stationary phases was essential. In particular, the elucidation and understanding of the underlying enantioselective supramolecular separation mechanisms led to the design of new chiral stationary phases. This review article focuses on the development of chiral stationary phases for gas chromatography. The fundamental mechanisms of the recognition and separation of enantiomers and the selectors and chiral stationary phases used in chiral gas chromatography are presented. An overview over syntheses and applications of these chiral stationary phases is presented as a practical guidance for enantioselective separation of chiral compound classes and substances by gas chromatography.

Asunto(s)

RESUMEN

The development of chiral selectors for the separation and analysis of chiral molecules has been an evolving process happening over three decades, since the introduction of the first chiral stationary phase (CSP) in 1938. The main impetus for designing new chiral selectors is to get to most promising one which has a broad chiral recognition property, separation capability for a wide range of chiral analytes, and the cost-effective CSP, which is also a major concern. Today, we have more than 100 commercially available CSPs, and these are prepared by coating or immobilizing the classical chiral selectors on to the chromatographic support, normally, silica gel. The purpose of this review is to look at progress and the impact of cyclofructan derivatives, a novel chiral selector introduced recently, for performing chiral analysis.

Asunto(s)

RESUMEN

Enantioselective chromatography is one of the most used techniques for the separation and purification of enantiomers. The most important issue for a specific successful enantioseparation is the selection of the suitable chiral stationary phase (CSP). Different synthetic approaches have been applied for the preparation of CSPs, which embrace coating and immobilization methods. In addition to the classical and broadly applied coating and immobilization procedures, innovating strategies have been introduced recently. In this review, an overview of different methods for the preparation of coated and immobilized CSPs is described. Updated examples of CSPs associated with the various strategies are presented. Considering that after the preparation of a CSP its characterization is fundamental, the methods used for the characterization of all the described CSPs are emphasized.

RESUMEN

Bile salts are naturally occurring chiral surfactants that are able to solubilize hydrophobic compounds. Because of this ability, bile salts were exploited as chiral selectors added to the background solution (BGS) in the chiral micellar electrokinetic chromatography (MEKC) of various small molecules. In this review, we aimed to examine the developments in research on chiral MEKC using bile salts as chiral selectors over the past 20 years. The review begins with a discussion of the aggregation of bile salts in chiral recognition and separation, followed by the use of single bile salts and bile salts with other chiral selectors (i.e., cyclodextrins, proteins and single-stranded DNA aptamers). Advanced techniques such as partial-filling MEKC, stacking and single-drop microextraction were considered. Potential applications to real samples, including enantiomeric impurity analysis, were also discussed.

RESUMEN

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector-selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.

RESUMEN

Polysaccharides, oligosaccharides, and their derivatives, particularly of amylose, cellulose, chitosan, and ß-cyclodextrin, are well-known chiral selectors (CSs) of chiral stationary phases (CSPs) in chromatography, because they can separate a wide range of enantiomers. Typically, such CSPs are prepared by physically coating, or chemically immobilizing the polysaccharide and ß-cyclodextrin derivatives onto inert silica gel carriers as chromatographic support. Over the past few years, new chiral selectors have been introduced, and progressive methods to prepare CSPs have been exploited. Also, chiral recognition mechanisms, which play a crucial role in the investigation of chiral separations, have been better elucidated. Further insights into the broad functional performance of commercially available chiral column materials and/or the respective newly developed chiral phase materials on enantiomeric separation (ES) have been gained. This review summarizes the recent developments in CSs, CSP preparation, chiral recognition mechanisms, and enantiomeric separation methods, based on polysaccharides and ß-cyclodextrins as CSs, with a focus on the years 2019-2020 of this rapidly developing field.

RESUMEN

This work reviews the literature of chiral capillary electrokinetic chromatography from January 2016 to March 2021. This is done to explore the state-of-the-art approach and recent developments carried out in this field. The separation principle of the technique is described and supported with simple graphical illustrations, showing migration under normal and reversed polarity modes of the separation voltage. The most relevant applications of the technique for enantioseparation of drugs and other enantiomeric molecules in different fields using chiral selectors in single, dual, or multiple systems are highlighted. Measures to improve the detection sensitivity of chiral capillary electrokinetic chromatography with UV detector are discussed, and the alternative aspects are explored, besides special emphases to hyphenation compatibility to mass spectrometry. Partial filling and counter migration techniques are described. Indirect identification of the separated enantiomers and the determination of enantiomeric migration order are mentioned. The application of Quality by Design principles to facilitate method development, optimization, and validation is presented. The elucidation and explanation of chiral recognition in molecular bases are discussed with special focus on the role of molecular modeling.

RESUMEN

In this study superficially porous silica particles with a nominal pore size of 450 Å and average particle size of 2.6 micrometers was compared to fully porous silica particles with nominal particle size 3 micrometers and nominal pore size 1000 A as carriers for a polysaccharide based chiral selector for the separation of enantiomers in high-performance liquid chromatography. In addition, the effects of chiral selector loading onto the silica support and of column internal dimeter in the case of both, superficially porous and totally porous silica, as well as of the pore size of superficially porous silica on column performance were studied. The dependence of plate height on mobile phase flow rate was also studied and attempts were made for shortening analysis time. The baseline separation of enantiomers of some chiral sulfoxides was obtained within 2.0-4.5 s.

Asunto(s)

RESUMEN

In this short communication, we report the use of a second-generation macrolide antibiotic, gamithromycin (Gam), as a novel chiral selector for enantioseparation in capillary electrophoresis (CE). A preliminary analysis of the experiment results shows that Gam is especially suitable for the separation of chiral primary amines. Factors influencing enantioseparations were systematically investigated including the composition of the background electrolyte (BGE), concentration of Gam, the type and proportion of organic solvents, applied voltage, etc. In particular, N-Methylformamide (NMF) was successfully used as a non-aqueous solvent for Gam, and shown to be extremely effective for the separation of primaquine (PMQ) and 1-aminoindan (AMI) when used alone or mixed with other commonly used non-aqueous solvents (e.g. methanol). To our knowledge this was also the first application of NMF as a non-aqueous solvent for antibiotic chiral selectors in CE. The best separations were obtained with 100 mM Tris, 125 mM H3BO3 and 80 mM Gam in methanol/NMF (25:75) solvent for PMQ and AMI, or 80-100 mM Gam in methanol for the other model analytes. Among the analytes, the resolution (Rs) of amlodipine (AML) reached up to 15.65, which is to our knowledge the highest value ever reported in CE studies for this compound (except for using molecularly imprinted polymers technique).

Asunto(s)