RESUMEN

Developing long-chain molecules with stable helical structures is of significant importance for understanding and modulating the properties and functions of helical biological macromolecules, but challenging. In this work, an effective and facile approach to stabilize folded helical structures by strengthening through-space conjugation is proposed, using new ortho-hexaphenylene (o-HP) derivatives as models. The structure-activity relationship between the through-space conjugation and charge transport behavior of the prepared folded helical o-HP derivatives is experimentally and theoretically investigated. It is demonstrated that the through-space conjugation within o-HP derivatives can be strengthened by introducing electron-withdrawing pyridine and pyrazine, which can effectively stabilize the helical structures of o-HP derivatives. Moreover, scanning tunneling microscopy-break junction measurements reveal that the stable regular helical structures of o-HP derivatives open up dominant through-space charge transport pathways, and the single-molecule conductance is enhanced by more than 70% by strengthening through-space conjugation with pyridine and pyrazine. But the through-bond charge transport pathways contribute much less to the conductance of o-HP derivatives. These results not only provide a new method for exploring stable helical molecules, but also pave a stepping stone for deciphering and modulating the charge transport behavior of helical systems at the single-molecule level.

RESUMEN

The construction of anatase/rutile heterojunctions in TiO2 is an effective way of improving the CO2 photoreduction activity. Yet, the origin of the superior photocatalytic performance is still unclear. To solve this issue, the band edges between anatase and rutile phases were theoretically determined based on the three-phase atomic model of (112)A/II/(101)R, and simultaneously the CO2 reduction processes were meticulously investigated. Our calculations show that photogenerated holes can move readily from anatase to rutile via the thin intermediated II phase, while photoelectrons flowing in the opposite direction may be impeded due to the electron trapping sites at the II phase. However, the large potential drop across the anatase/rutile interface and the strong built-in electric field can provide an effective driving force for photoelectrons' migration to anatase. In addition, the II phase can better enhance the solar light utilization of (112)A/(100)II, including a wide light response range and an intensive optical absorption coefficient. Meanwhile, the mixed-phase TiO2 possesses negligible hydrogenation energy (CO2 to COOH*) and lower rate-limiting energy (HCOOH* to HCO*), which greatly facilitate CH3OH generation. The efficient charge separation, strengthened light absorption, and facile CO2 reduction successfully demonstrate that the anatase/rutile mixed-phase TiO2 is an efficient photocatalyst utilized for CO2 conversion.

RESUMEN

The nature of interchain π-system contacts, and their relationship to hole transport, are elucidated for the high-mobility, noncrystalline conjugated polymer C16-IDTBT by the application of scanning tunneling microscopy, molecular dynamics, and quantum chemical calculations. The microstructure is shown to favor an unusual packing motif in which paired chains cross-over one another at near-perpendicular angles. By linking to mesoscale microstructural features, revealed by coarse-grained molecular dynamics and previous studies, and performing simulations of charge transport, it is demonstrated that the high mobility of C16-IDTBT can be explained by the promotion of a highly interconnected transport network, stemming from the adoption of perpendicular contacts at the nanoscale, in combination with fast intrachain transport.

RESUMEN

Traditionally used phenylethylamine iodide (PEAI) and its derivatives, such as ortho-fluorine o-F-PEAI, in interfacial modification, are beneficial for perovskite solar cell (PSC) efficiency but vulnerable to heat stability above 85 °C due to ion migration. To address this issue, we propose a composite interface modification layer incorporating the discotic liquid crystal 2,3,6,7,10,11-hexa(pentoxy)triphenylene (HAT5) into o-F-PEAI. The triphenyl core in HAT5 promotes π-π stacking self-assembly and enhances its interaction with o-F-PEAI, forming an oriented columnar phase that improves hole extraction along the one-dimensional direction. HAT5 repairs structural defects in the interfacial layer and retains the layered structure to inhibit ion migration after annealing. Ultimately, our approach increases the efficiency of solar cells from 23.36% to 25.02%. The thermal stability of the devices retains 80.1% of their initial efficiency after aging at 85 °C for 1008 hours without encapsulation. Moreover, the optimized PSCs maintained their initial efficiency of 82.4% after aging under one sunlight exposure for 1008 hours. This study provides a novel strategy using composite materials for interface modification to enhance the thermal and light stability of semiconductor devices.

RESUMEN

Rational construction of high-efficiency photoelectrodes with optimized carrier migration to the ideal active sites, is crucial for enhancing solar water oxidation. However, complexity in precisely modulating interface configuration and directional charge transfer pathways retards the design of robust and stable artificial photosystems. Herein, a straightforward yet effective strategy is developed for compact encapsulation of metal oxides (MOs) with an ultrathin non-conjugated polymer layer to modulate interfacial charge migration and separation. By periodically coating highly ordered TiO2 nanoarrays with oppositely charged polyelectrolyte of poly(dimethyl diallyl ammonium chloride) (PDDA), MOs/polymer composite photoanodes are readily fabricated under ambient conditions. It is verified that electrons photogenerated from the MOs substrate can be efficiently extracted by the ultrathin solid insulating PDDA layer, significantly boosting the carrier transport kinetics and enhancing charge separation of MOs, and thus triggering a remarkable enhancement in the solar water oxidation performance. The origins of the unexpected electron-withdrawing capability of such non-conjugated insulating polymer are unambiguously uncovered, and the scenario occurring at the interface of hybrid photoelectrodes is elucidated. The work would reinforce the fundamental understanding on the origins of generic charge transport capability of insulating polymer and benefit potential wide-spread utilization of insulating polymers as co-catalysts for solar energy conversion.

RESUMEN

The wide tunability of the energy bandgap of colloidal lead sulfide (PbS) quantum dots (QDs) has uniquely positioned them for the development of single junction and tandem solar cells. While there have been substantial advancements in moderate and narrow bandgap PbS QDs-ideal for single junction solar cells and the bottom cell in tandem solar cells, respectively; progress has been limited in high-bandgap PbS QDs that are ideally suited for the formation of the top cell in tandem solar cells. The development of appropriate high bandgap PbS QDs would be a major advancement toward realizing efficient all-QD tandem solar cells utilizing different sizes of PbS QDs. Here, we report a comprehensive approach encompassing synthetic strategy, ligand engineering, and hole transport layer (HTL) modification to implement high-bandgap PbS QDs into solar cell devices. We achieved a greater degree of size homogeneity in high-bandgap PbS QDs through the use of a growth retarding agent and a partial passivation strategy. By adjusting the ligand polarity, we successfully grow HTL over the QD film to fabricate solar cells. With the aid of an interface modifying layer, we incorporated an organic HTL for the realization of high-performance solar cells. These solar cells exhibited an impressive open-circuit voltage of 0.824 V and a power conversion efficiency of 10.7%, marking a 360% improvement over previous results.

RESUMEN

Bismuth halide hybrid perovskites have emerged as promising alternatives to their lead halide homologs because of high chemical stability, low toxicity, and structural diversity. However, their advancements in optoelectronic field are plagued with poor charge transport, due to considerable microstrain triggered by bulky spacer. Herein, the di-tertiary ammonium spacer (N,N,N',N'-tetramethyl-1,4-butanediammonium, TMBD) is explored to direct stable 1D bismuth bromide lattice structure with relaxed microstrain. Compared to the primary pentamethylenediamine (PD)2+, the (TMBD)2+ adopting alternating alignment enables a unique H-bonds mode to distort the configuration of inorganic layers to form corner-sharing [BiBr5] near-regular chains with narrower bandgap, lower exciton binding energy, and reduced carrier-lattice interactions, thereby facilitating charge-carrier transport. Moreover, the (TMBD)2+ spacers largely suppress ion migration in perovskite lattice, as substantiated by the experimental and theoretical investigations. Consequently, (TMBD)BiBr5 single crystal photodetector delivers a 185-fold increase in current on/off ratio with respect to (PD)BiBr5 under white light irradiation, considerable responsivity (≈82.97 mA W-1), detectivity (≈8.06 ×1011 Jones) under weak light (0.02 mW cm-2) irradiation, in the top rank of the reported hybrid bismuth halide perovskites. This finding offers novel design criterion for high-performance lead-free perovskites.

RESUMEN

Single-component organic solar cells based on double cable polymers have achieved remarkable performance, with DCPY2 reaching a high efficiency of over 13%. In this study, DCPY2 is further optimized with an efficiency of 13.85%, maintaining a high fill factor (FF) without compromising the short circuit current. Despite its intermixed morphology, DCPY2 shows a reduced recombination rate compared to their binary counterpart (PBDB-T:Y-O6). This slower recombination in DCPY2 is attributed to the reduced wavefunction overlap of delocalized charges, achieved by spatially separating the donor and acceptor units with an alkyl linker, thereby restricting the recombination pathways. Adding 1,8-diiodooctane (DIO) into DCPY2 further reduced the recombination rate by facilitating acceptor aggregation, allowing free charges to become more delocalized. The DIO-assisted aggregation in DCPY2 (5% DIO) is evidenced by an increased pseudo-pure domain size of Y-O6. Fine molecular control at the donor/acceptor interface in the double-cable polymer achieves reduced non-geminate recombination under efficient charge generation, increased mobility, and charge carrier lifetime, thereby achieving superior performance. Nevertheless, the FF is still limited by relatively low mobility compared to the blend, suggesting the potential for further mobility improvement through enhanced higher-dimensional packing of the double-cable material.

RESUMEN

Isoindigo, an electron-withdrawing building block for polymeric field-effect transistors, has long been considered to be non-fluorescent. Moreover, using electron-deficient heterocycle to replace the phenyl ring in the isoindigo core for better electron transport behaviour is synthetically challenging. Here we report the syntheses of a series of tetraazaisoindigos, including pyrazinoisoindigo (PyrII), pyrimidoisoindigo (PymII) and their hybrid (PyrPymII), and the investigation on their photophysical and electric properties. Proper flanking groups need to be chosen to stabilize these highly electron-deficient bislactams. Both PyrII and PymII derivatives show lower LUMO energy levels than that of naphthalene bisimide (NDI). Interestingly, PyrII is instinctively unstable and can be easily reduced, while both PymII derivatives are stable. More surprisingly, PymII derivatives are highly fluorescent and their photoluminescence quantum yields are around 40%, 133 times higher than that of reported isoindigo derivatives. UV-vis spectroscopic results and theoretical calculations show that strong intramolecular hydrogen-bond exists in PymII, which prohibits it from non-radiative decay and accounts for its fluorescent behaviour.  PymII deriviatives are n-type semiconductors, while Ph-PyrII and the hybrid show balanced ambipolar charge transport behaviour, all among the best isoindigo derivatives. Our study not only discloses the structure-property relationship of tetraazaisoindigos, but also provides electron-deficient monomers for conjugated polymers.

RESUMEN

Organosilicate glass (OSG) films are a critical component in modern electronic devices, with their electrical properties playing a crucial role in device performance. This comprehensive review systematically examines the influence of chemical composition, vacuum ultraviolet (VUV) irradiation, and plasma treatment on the electrical properties of these films. Through an extensive survey of literature and experimental findings, we elucidate the intricate interplay between these factors and the resulting alterations in electrical conductivity, dielectric constant, and breakdown strength of OSG films. Key focus areas include the impact of diverse organic moieties incorporated into the silica matrix, the effects of VUV irradiation on film properties, and the modifications induced by various plasma treatment techniques. Furthermore, the underlying mechanisms governing these phenomena are discussed, shedding light on the complex molecular interactions and structural rearrangements occurring within OSG films under different environmental conditions. It is shown that phonon-assisted electron tunneling between adjacent neutral traps provides a more accurate description of charge transport in OSG low-k materials compared to the previously reported Fowler-Nordheim mechanism. Additionally, the quality of low-k materials significantly influences the behavior of leakage currents. Materials retaining residual porogens or adsorbed water on pore walls show electrical conductivity directly correlated with pore surface area and porosity. Conversely, porogen-free materials, developed by Urbanowicz, exhibit leakage currents that are independent of porosity. This underscores the critical importance of considering internal defects such as oxygen-deficient centers (ODC) or similar entities in understanding the electrical properties of these materials.

RESUMEN

Wide-bandgap perovskite solar cells (PSCs) with high open-circuit voltage (Voc) represent a compelling and emerging technological advancement in high-performing perovskite-based tandem solar cells. Interfacial engineering is an effective strategy to enhance Voc in PSCs by tailoring the energy level alignments between the constituent layers. Herein, n-type quinoxaline-phosphine oxide-based small molecules with strong dipole moments is designed and introduce them as effective cathode interfacial layers. Their strong dipole effect leads to appropriate energy level alignment by tuning the work function of the Ag electrode to form an ohmic contact and enhance the built-in potential within the device, thereby improving charge-carrier transport and mitigating charge recombination. The organic interfacial layer-modified wide-bandgap PSCs exhibit a high Voc of 1.31 V (deficit of <0.44 V) and a power conversion efficiency (PCE) of 20.3%, significantly improved from the device without an interface dipole layer (Voc of 1.26 V and PCE of 16.7%). Furthermore, the hydrophobic characteristics of the small molecules contribute to improved device stability, retaining 95% of the initial PCE after 500 h in ambient air.

RESUMEN

Interface-induced nonradiative recombination losses at the perovskite/electron transport layer (ETL) are an impediment to improving the efficiency and stability of inverted (p-i-n) perovskite solar cells (PSCs). Tridecafluorohexane-1-sulfonic acid potassium (TFHSP) is employed as a multifunctional dipole molecule to modify the perovskite surface. The solid coordination and hydrogen bonding efficiently passivate the surface defects, thereby reducing nonradiative recombination. The induced positive dipole layer between the perovskite and ETLs improves the energy band alignment, enhancing interface charge extraction. Additionally, the strong interaction between TFHSP and the perovskite stabilizes the perovskite surface, while the hydrophobic fluorinated moieties prevent the ingress of water and oxygen, enhancing the device stability. The resultant devices achieve a power conversion efficiency (PCE) of 24.6%. The unencapsulated devices retain 91% of their initial efficiency after 1000 h in air with 60% relative humidity, and 95% after 500 h under maximum power point (MPP) tracking at 35 °C. The utilization of multifunctional dipole molecules opens new avenues for high-performance and long-term stable perovskite devices.

RESUMEN

Proteins play a key role in biological electron transport, but the structure-function relationships governing the electronic properties of peptides are not fully understood. Despite recent progress, understanding the link between peptide conformational flexibility, hierarchical structures, and electron transport pathways has been challenging. Here, we use single-molecule experiments, molecular dynamics (MD) simulations, nonequilibrium Green's function-density functional theory (NEGF-DFT), and unsupervised machine learning to understand the role of secondary structure on electron transport in peptides. Our results reveal a two-state molecular conductance behavior for peptides across several different amino acid sequences. MD simulations and Gaussian mixture modeling are used to show that this two-state molecular conductance behavior arises due to the conformational flexibility of peptide backbones, with a high-conductance state arising due to a more defined secondary structure (beta turn or 310 helices) and a low-conductance state occurring for extended peptide structures. These results highlight the importance of helical conformations on electron transport in peptides. Conformer selection for the peptide structures is rationalized using principal component analysis of intramolecular hydrogen bonding distances along peptide backbones. Molecular conformations from MD simulations are used to model charge transport in NEGF-DFT calculations, and the results are in reasonable qualitative agreement with experiments. Projected density of states calculations and molecular orbital visualizations are further used to understand the role of amino acid side chains on transport. Overall, our results show that secondary structure plays a key role in electron transport in peptides, which provides broad avenues for understanding the electronic properties of proteins.

Asunto(s)

RESUMEN

Ambipolar organic light-emitting transistors (OLETs) are extremely appealing devices for applications from sensing to communication and display realization due to their inherent capability of coupling switching and light-emitting features. However, their limited external quantum efficiency (EQE) and brightness under ambipolar bias conditions hamper the progress of OLET technology. In this context, it was recently demonstrated in multi-stacked devices that the engineering of the interface between the topmost electron-transporting organic semiconductor (e-OS) and the emission layer (EML) is crucial in optimizing the recombination of the minority charges (i.e., electrons) and to enhance EQE and brightness. Here, we introduce a new light-emitting conjugated polar polymer (CPP) in a multi-stacked OLET to improve the electron injection from e-OS to EML and to study, simultaneously, electroluminescence-related processes such as exciton formation and quenching processes. Interestingly, we observed that the highly polar groups present in the conjugate polymer induced polarization-related relevant charge-trapping phenomena with consequent modulation of the entire electrostatic field distribution and unexpected optoelectronic features. In view of the extensive use of CPPs in OLETs, the use of multifunctional CPPs for probing photophysical processes at the functional interfaces in stacked devices may speed up the improvement of the light-emission properties in OLETs.

RESUMEN

The urgent need to shift from non-renewable to renewable energy sources has caused widespread interest in photovoltaic technologies that allow us to harness readily available and sustainable solar energy. In the past decade, polymer solar cells (PSCs) and perovskite solar cells (Per-SCs) have gained attention owing to their low price and easy fabrication process. Charge transport layers (CTLs), transparent conductive electrodes (TCEs), and metallic top electrodes are important constituents of PSCs and Per-SCs, which affect the efficiency and stability of these cells. Owing to the disadvantages of current materials, including instability and high cost, the development of alternative materials has attracted significant attention. Owing to their more flexible physical and chemical characteristics, ternary oxides are considered to be appealing alternatives, where ATiO3 materials-a class of ternary perovskite oxides-have demonstrated considerable potential for applications in solar cells. Here, we have employed calculations based on the density functional theory to study the structural, optoelectronic, and magnetic properties of ATiO3 (A=Li, Na, K, Rb, and Cs) in different crystallographic phases to determine their potential as PSCs and Per-SCs materials. We have also determined thermal and elastic properties to evaluate their mechanical and thermal stability. Our calculations have revealed that KTiO3 and RbTiO3 possess similar electronic properties as half-metallic materials, while LiTiO3 and CsTiO3 are metallic. Semiconductor behavior with a direct band gap of 2.77 eV was observed for NaTiO3, and calculations of the optical and electronic properties predicted that NaTiO3 is the most appropriate candidate to be employed as a charge transfer layer (CTL) and bottom transparent conducting electrode (TCE) in PSCs and Per-SCs, owing to its transparency and large bandgap, whereas NaTiO3 also provided superior elastic and thermal properties. Among the metallic and half-metallic ATiO3 compounds, CsTiO3 and KTiO3 exhibited the most appropriate features for the top electrode and additional absorbent in the active layer, respectively, to enhance the performance and stability of these cells.

RESUMEN

Organic synaptic transistors are a promising technology for advanced electronic devices with simultaneous computing and memory functions and for the application of artificial neural networks. In this study, the neuromorphic electrical characteristics of organic synaptic electrolyte-gated transistors are correlated with the microstructural and interfacial properties of the active layers. This is accomplished by utilizing a semiconducting/insulating polyblend-based pseudobilayer with embedded source and drain electrodes, referred to as PB-ESD architecture. Three variations of poly(3-hexylthiophene) (P3HT)/poly(methyl methacrylate) (PMMA) PB-ESD-based organic synaptic transistors are fabricated, each exhibiting distinct microstructures and electrical characteristics, thus serving excellent samples for exploring the critical factors influencing neuro-electrical properties. Poor microstructures of P3HT within the active layer and a flat active layer/ion-gel interface correspond to typical neuromorphic behaviors such as potentiated excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF), and short-term potentiation (STP). Conversely, superior microstructures of P3HT and a rough active layer/ion-gel interface correspond to significantly higher channel conductance and enhanced EPSC and PPF characteristics as well as long-term potentiation behavior. Such devices were further applied to the simulation of neural networks, which produced a good recognition accuracy. However, excessive PMMA penetration into the P3HT conducting channel leads to features of a depressed EPSC and paired-pulse depression, which are uncommon in organic synaptic transistors. The inclusion of a second gate electrode enables the as-prepared organic synaptic transistors to function as two-input synaptic logic gates, performing various logical operations and effectively mimicking neural modulation functions. Microstructure and interface engineering is an effective method to modulate the neuromorphic behavior of organic synaptic transistors and advance the development of bionic artificial neural networks.

RESUMEN

Development of organic nonlinear optical materials has become progressively more important due to their emerging applications in new-generation photonic devices. A novel series of chromophores based on innovative thiophene and furan-fused cyclopentadienyl bridge with various powerful donor and acceptor moieties were designed and theoretically investigated for applications in nonlinear optics. To unravel the structure-property relationship between this new push-pull conjugated systems and their nonlinear optical property, multiple methods, including density of states analysis, coupled perturbed Kohn-Sham (CPKS) method, sum-over-states (SOS) model, the two-level model (TSM), hyperpolarizability density analysis, and the (hyper)polarizability contribution decomposition, were performed to comprehensively investigated the nonlinear optical and electronic properties of this new π-system. Due to excellent charge transfer ability of new bridge and distinctive structure of donor and acceptor, the designed chromophores exhibit deep HOMO levels, low excitation energy, high dipole moment difference and large hyperpolarizability, indicating the appealing air-stable property and remarkable electrooptic performance of them. Importantly, THQ-CS-A3 and PA-CS-A3 shows outstanding NLO response properties with ßtot value of 6953.9 × 10-30 and 5066.0 × 10-30 esu in AN, respectively. The influence of the push-pull strength, the heterocycle and the π-conjugation of new bridge on the nonlinear optical properties of this novel powerful systems are clarified. This new series of chromophores exhibit remarkable electro-optical Pockels and optical rectification effect. More interestingly, PA-CS-A3 and THQ-CS-A2 also show appealing SHG effect. This study will help people understand the nature of nonlinear optical properties of innovative heteroarene-fused based cyclopentadienyl chromophores and offer guidance for the rational design of chromophores with outstanding electrooptic (EO) performance in the future.

RESUMEN

Organometallic molecules are promising for molecular electronic devices due to their potential to improve electrical conductance through access to complex orbital covalency that is not available to light-element organic molecules. However, studies of the formation of organometallic monolayers and their charge transport properties are scarce. Here, we report the cluster formation and charge transport properties of gold-triarylbismuthane-gold molecular junctions. We found that triarylbismuthane molecules with -CN anchoring groups form clusters during the creation of self-assembled submonolayers. This clustering is attributed to strong interactions between the bismuth (Bi) center and the nitrogen atom in the -CN group of adjacent molecules. Examination of the influence of -NH2 and -CN anchoring groups on junction conductance revealed that, despite a stronger binding energy between the -NH2 group and gold, the conductance per molecular unit (i.e., molecule for the -NH2 group and cluster for the -CN group) is higher with the -CN anchoring group. Further analysis showed that an increase in the number of -CN groups from one to three within the junctions leads to a decrease in conductance while increasing the size of the cluster. This demonstrates the significant effects of different anchoring groups and the impact of varying the number of -CN groups on both the charge transport and cluster formation. This study highlights the importance of selecting the appropriate anchoring group in the design of molecular junctions. Additionally, controlling the size and formation of clusters can be a strategic approach to engineering charge transport in molecular junctions.

RESUMEN

Single-component organic solar cells (SCOSCs) have attracted extensive attention due to their simplified device manufacturing and excellent stability. However, the relationship between morphology and charge carrier mobility in the active layers of SCOSCs is not well understood. In this work, we present a comprehensive investigation on this issue by studying four dyads (fullerenes as acceptor units) used as materials of active layers in small-molecule single-component organic solar cells (SM-SCOSCs), in which dyad 4 created the record of power conversion efficiency (PCE) of SM-SCOSC until now. Utilizing a multiscale theoretical approach, the results identify that the acceptor-acceptor stacking is dominant in amorphous films, significantly improving electron mobility and lowering hole mobility. We also find the importance of achieving a balance between electron and hole mobility to further improve PCE of SM-SCOSC because dyad 4 exhibits a more balanced electron/hole mobility than the other three molecules. These findings indicate the importance of tuning and enhancing donor-donor and acceptor-acceptor stacking simultaneously, offering insights for the design and optimization of future SM-SCOSC.

RESUMEN

Heterogeneous interfaces in most devices play a key role in the material performance. Exploring the atomic structure and electronic properties of metal-molecule interfaces is critical for various potential applications, such as surface sensing, molecular recognition, and molecular electronic devices. This study unveils a ubiquitous interfacial stereoelectronic effect in conjugated molecular junctions by combining first-principles simulation and scanning tunneling microscopy break junction technology. Single-molecule junctions with same-side interfacial anchoring (cis configuration) exhibit higher conductance than those with opposite-side interfacial anchoring (trans configuration). The cis and trans configurations can undergo reversible conversions, resulting in a conductance switching. The stability of these configurations can be adjusted by an electric field, achieving precise regulation of conductance states. Our findings provide important insights for designing high-quality materials and enhancing the device performance.