RESUMEN

Microbial biofilms and microbiologically influenced corrosion (MIC) pose serious problems in pipelines transporting freshwater from the reservoir to service water systems and fire water systems of power reactors. The present work aims to design a silane-based epoxy-biocide hybrid coating along with antibacterial compounds on carbon steels (CS) for controlling the MIC of pipeline materials. The optimal inhibitory concentrations of biocides are identified and a robust protocol has been developed to prepare epoxy-based coatings impregnated with three biocides (25 ppm each of benzalkonium chloride, bronopol, and isothiazoline). Microbiological and accelerated corrosion studies were carried out by exposing the coated CS specimens to the enriched freshwater bacterial culture (FWC). As compared to the impedance value of 102 Ohms for the polished CS, the values were 106 and 105 Ohms, respectively, for epoxy-coated specimens (CSE) and epoxy-coated specimens impregnated with biocides (CSEB). The corrosion protection efficiency of CSE and CSEB coated specimens exposed to FWC was 99.9% and 98.1%, respectively. Confocal microscopic analysis showed the average biomass thickness was 51.3 ± 0.6 µm and 24.4 ± 0.5 µm, respectively, for CSE and CSEB specimens in comparison to 94.1 ± 0.2 µm on CS specimens. The improved anticorrosion and antifouling behaviors observed in the CSEB specimens suggest that the new coating strategy has the potential for the development of multifunctional hybrid epoxy coatings for pipeline materials to mitigate MIC-related issues in water-transporting pipeline systems.

Asunto(s)

RESUMEN

Fish farming plays a vital role in providing food, nutrition, and employment globally. However, this industry faces security challenges, necessitating the use of fungicides and preservatives, such as bronopol, to increase product yields. Bronopol (2­bromo-2-nitropropan-1,3-diol; CAS:52-51-7) is widely used in various fields, including food production, cosmetics, and, more recently, aquaculture. Currently, there is a limited number of techniques available for detecting bronopol in aquaculture products. This is primarily due to bronopol's instability, susceptibility to degradation, and tendency to form precipitates that pose challenges in extraction from aquaculture products. For this issue, this study presents a comprehensive method for detecting bronopol content in aquaculture tissues using liquid chromatography-tandem mass spectrometry (LC‒MS/MS). The methodology was optimized, involving extraction with Cu-Zn precipitant, cleanup using a small HLB column, separation on a T3 column, and gradient elution with water and acetonitrile mobile phases. The quantitative approach was employed without the use of an internal standard, following the external standard method. The spiked recoveries at 3 fortification levels (0.1, 0.2, and 1 mg/kg) ranged from 87.1 % to 108.1 % with relative standard deviations RSD ≤ 9.0 %. By applying this method to fresh fish, shrimp, crab, and shellfish samples from a local supermarket, no residues of bronopol were detected, ensuring the reliability of the results. The simplicity, rapidity, and high sensitivity of the method make it a suitable alternative to conventional techniques for bronopol detection. Moreover, the successful validation of the method's recovery and precision supports its potential application in monitoring and preventing the misuse of bronopol in aquaculture, thereby safeguarding aquaculture product quality and protecting public health.

Asunto(s)

RESUMEN

The aim was to develop a reliable rapid reversed-phase high-performance liquid chromatography (RP-HPLC) method to simultaneously determine the main bovine milk protein fractions, including their genetic variants. Compared to the previous studies, our method is able to separate the main protein fractions within 20 min of total run time. The method validation consisted of testing repeatability, reproducibility linearity, repeatability, and accuracy. The procedure was developed using raw individual, bulk, and commercially available heat-treated cow milk samples. The RSD of peak areas ranged from 1.43 to 3.16% within analytical day and from 3.29 to 6.70% across analytical days. The method can be applied to investigate both raw and heat-treated milk samples.

Asunto(s)

RESUMEN

Saprolegniasis, which is caused by Saprolegnia parasitica, leads to considerable economic losses. Recently, we showed that metalaxyl, bronopol and copper sulfate are good antimicrobial agents for aquaculture. In the current study, the efficacies of metalaxyl, bronopol and copper sulfate are evaluated by in vitro antimicrobial experiments, and the mechanism of action of these three antimicrobials on S. parasitica is explored using transcriptome technology. Finally, the potential target genes of antimicrobials on S. parasitica are identified by protein-protein interaction network analysis. Copper sulfate had the best inhibitory effect on S. parasitica, followed by bronopol. A total of 1771, 723 and 2118 DEGs upregulated and 1416, 319 and 2161 DEGs downregulated S. parasitica after three drug treatments (metalaxyl, bronopol and copper sulfate), separately. Additionally, KEGG pathway analysis also determined that there were 17, 19 and 13 significantly enriched metabolic pathways. PPI network analysis screened out three important proteins, and their corresponding genes were SPRG_08456, SPRG_03679 and SPRG_10775. Our results indicate that three antimicrobials inhibit S. parasitica growth by affecting multiple biological functions, including protein synthesis, oxidative stress, lipid metabolism and energy metabolism. Additionally, the screened key genes can be used as potential target genes of chemical antimicrobial drugs for S. parasitica.

Asunto(s)

RESUMEN

This review aims to provide a clinically useful update regarding the role of formaldehyde (FA) and its five main releasers (FRs) quaternium-15, diazolidinyl urea, DMDM hydantoin, imidazolidinyl urea, and 2-bromo-2-nitropropane-1,3-diol (bronopol) in contact allergy and allergic contact dermatitis. These ubiquitous preservatives are still often present, and sometimes undeclared, in cosmetics, pharmaceuticals, medical devices, household detergents, and chemical (industrial) products. In Europe, the use of free FA and quaternium-15 in cosmetics is forbidden and contact allergy rates have been found to be stable to decreasing. However, FA/FRs still readily provoke localized (eg, facial/hand), airborne, and generalized dermatitis, and may also complicate atopic and stasis dermatitis, or result in nummular dermatitis. Seborrheic-, rosacea- and impetigo-like dermatitis have recently been reported. For a correct diagnosis, FA 2% aq. (0.60 mg/cm2 ) should be used, and particularly the FRs bronopol 0.5% pet. and diazolidinyl urea 2% pet. should be patch tested separately in a baseline series. If sensitization to FA occurs, both FA and FRs should preferably be avoided, except perhaps for bronopol in case it tests negatively. If a patient reacts to one or more FRs (such as bronopol or diazolidinyl/imidazolidinyl urea), but not to FA, then the specific FR(s) should be avoided.

Asunto(s)

RESUMEN

Didecyldimethylammonium chloride (DDAC) and polyhexamethylene guanidine (PHMG) exhibit high antimicrobial activity and are widely used as biocidal agents in chemical toilet additives for the management of fecal sludge (FS). Disposal of such biocide-treated FS to a wastewater treatment plant (WWTP) is a major environmental problem. It is possible to reduce environmental damage through the use of biocidal agents, which easily decompose after performing their main biocidal functions. In this work, it is proposed to use the fact of a gradual increase in pH of FS from the initial 7.5 to 9.0-10.0 due to the decomposition of urea. Six biocidal compounds were selected that are capable of rapidly degrading in an alkaline environment and one that naturally degrades upon prolonged incubation. Four of them: bronopol (30 mg/L), DBNPA (500 mg/L), Sharomix (500 mg/L), and sodium percarbonate (6000 mg/L) have shown promise for environmentally friendly management of FS. In selected dosage, they successfully reduced microbial activity under both aerobic and anaerobic conditions and are cost-effective. After 10 days of incubation, degradation of the biocide occurred as measured by biological oxygen demand (BOD5) in biocide-treated FS. Such FS can be discharged to WWTP without severe damage to the activated sludge process, the need for dilution and additional procedures to neutralize toxicity.

RESUMEN

The sustainable application of an up-flow anaerobic baffled reactor (UABR) to treat real paper and cardboard industrial effluent (PCIE) containing bronopol (2-bromo-2-nitropropan-1, 3-diol) was investigated. At a hydraulic retention time (HRT) of 11.7 h and a bronopol concentration of 7.0 mg L-1, the removal efficiencies of total chemical oxygen demand (CODtotal), CODsoluble, CODparticulate, total suspended solids (TSS), volatile suspended solids (VSS), carbohydrates, and proteins were 55.3 ± 5.2%, 26.8 ± 2.3%, 94.4 ± 4.6%, 89.4 ± 2.6%, 84.5 ± 3.2%, 72.1 ± 1.8%, and 22.4 ± 1.8%, respectively. The conversion of complex organics (e.g., carbohydrates and proteins) into bio-methane (CH4) was assisted via enzyme activities of, in U (100 mL)-1, α-amylase (224-270), α-xylanase (171-188), carboxymethyl cellulase (CM-cellulase) (146-187), polygalacturonase (56-126), and protease (67,000-75300). The acidogenic condition was dominant at a short HRT of 2.9 h, where methane yield dropped by 32.5%. Under this condition, the growth of methanogenic bacteria could be inhibited by volatile fatty acids (VFA) accumulation. The analysis of Fourier-transform infrared (FTIR) spectra detected peaks relevant to methylene and nitro groups in the sludge samples, suggesting that entrapment/adsorption by the sludge bed could be a major mechanism for removing bronopol. The economic feasibility of UABR, as proposed to receive 100 m3 d-1 of PCIE, showed a payback period (profits from environmental benefits, biogas recovery, and carbon credit) of 7.6 yr. The study outcomes showed a high connection to the environmental-, economic-, and social-related sustainable development goals (SDGs).

Asunto(s)

RESUMEN

Bronopol and Detarox® AP are broad spectrum antimicrobial biocides of growing interest for the aquaculture sector. While their effectiveness against aquatic pathogens has been demonstrated, toxicity data on wild or farmed species are still lacking, as is information on their potential environmental risk for aquatic ecosystems. With this study, we assessed the acute and sublethal toxicity of Bronopol and Detarox® AP in the freshwater bivalve Sinanodonta woodiana and their theoretical risk for aquatic ecosystem. The 96-h median lethal concentration (LC50) was determined using the acute toxicity test, while for the sublethal toxicity test the bivalves were exposed to two concentrations for 14 days of Bronopol (2.5 and 50 mg/L) and Detarox® AP (1.11 and 22.26 mg/L) followed by a 14-day withdrawal period. Biocide-mediated oxidative processes were investigated via a panel of oxidative stress biomarkers (malondialdehyde, superoxide dismutase, catalase, glutathione peroxidase, glutathione S-transferase). Theoretical environmental risk assessment of both biocides, with predicted concentration of no effect (PNEC), expected theoretical concentration (TEC) in the environment, and risk quotient (RQ) was performed. TEC was calculated using a model based on the size of the aquaculture facility and the receiving basin, the estimated quantity of biocide dissolved in water, and published data on biocide stability in water. Although the LC50 was higher for Bronopol (2440 mg/L) than for Detarox® AP (126 mg/L), fluctuations in oxidative stress biomarkers levels indicated that both biocides exert a slight oxidative pressure on S. woodiana. Theoretical environmental risk assessment suggested a muted risk with Detarox® AP and greater eco-sustainability compared to Bronopol.

Asunto(s)

RESUMEN

In fish farming, high losses occur during egg incubation and larviculture due to diseases caused by oomycetes. This study aimed to identify the oomycete species that occurs in zebrafish Danio rerio eggs and to evaluate the oomyceticidal effect of copper sulfate, bronopol and methylene blue on the mycelial growth of this organism, as well as to determine the lethal and sublethal toxicity of these compounds in embryos of D. rerio. The isolates were cultivated in yeast-starch medium to determine the concentration necessary to inhibit mycelial growth by 50% (IC50) and 100% (minimum oomyceticidal concentration) after a 96 h exposure to these compounds. In addition, tests with D. rerio eggs were conducted to determine the lethal concentrations for 50% of the organisms (96h-LC50), and the concentrations that inhibited 17% of the eggs hatching (96h-IC17) after 96 h. The organism responsible for the mortality of D. rerio eggs was classified by classical and molecular methods as Aphanomyces brasiliensis, representing the first report of this pathogen in zebrafish eggs. IC50 values could be determined for both bronopol and copper sulfate, whereas methylene blue had low effectiveness against the oomycete. Copper showed high toxicity to D. rerio eggs at low concentrations, while methylene blue and bronopol toxicity was low and similar to each other. The use of bronopol at a concentration of 4.8 mg l-1 for the treatment of zebrafish eggs allows controlling the pathology without causing deleterious effects to the treated organisms.

Asunto(s)

RESUMEN

The objective was to evaluate the influence of the formulation in the in vitro transdermal absorption through pig ear skin of three preservatives, bronopol, bronidox and formaldehyde as well as the absorption of formaldehyde from bronopol and dimethyloldimethyl hydantoin (DMDM hydantoin). An aqueous solution, an O/W emulsion and a hydrogel were assayed. Bronidox and bronopol absorption depends on the formulation. The O/W emulsion was the system that least promoted absorption of bronidox while the absorption of bronopol was lower from the hydrogel. The aqueous solution provided maximal transdermal absorption of both preservatives. Moreover, the transdermal absorption of formaldehyde released from bronopol also depends on the formulation, being the aqueous solution the system that allowed greater absorption. Transdermal absorption of formaldehyde, applied directly or released from DMDM hydantoin, is not conditioned by the excipients. The degree of transdermal absorption of all the preservatives tested is low and therefore the concentrations allowed by regulations are safely used. Nonetheless, since formaldehyde was detected in the receptor compartment after a long time exposure to bronopol and DMDM hydantoin it would be important to consider the possibility of limiting the use of these two preservatives to rinse off products as is the case of bronidox.

Asunto(s)

Asunto(s)

RESUMEN

Here we describe a method based on Liquid Chromatography coupled with Mass Spectrometry (LC-MS) that provides an accurate determination of the six main bovine milk proteins, including allelic and splicing variants, as well as isoforms resulting from post-translational modifications, with an unprecedented level of resolution. Proteins are identified from observed molecular masses in comparison with theoretical masses of intact proteins indexed in an "in-house" database that includes nearly 3000 entries. Quantification was performed either from UV (214 nm) or mass signals. Thus, up to one hundred molecules, derived from the six major milk proteins, can be identified and quantified from an individual milk sample. This powerful and reliable method, initially developed as an anchoring method to estimate the composition of the six main bovine milk proteins from MIR spectra, is transferable to several mammalian species, including small ruminants, camels, equines, rabbits, etc., for which specific mass databases are available.

RESUMEN

The temporal instability of raw milk microbiota drastically affects the reliability of microbiome studies. However, little is known about the microbial integrity in preserved samples. Raw cow milk samples were preserved with azidiol or bronopol and stored at 4 °C, or with dimethyl sulfoxide (DMSO) or a mixture of azidiol and DMSO and stored at -20 °C for up to 30 days. Aliquots of 5-, 10-, and 30-day post-storage were treated with propidium monoazide (PMA), then analyzed by sequencing the 16S rRNA gene V3-V4 and V6-V8 regions. The V6-V8 gave a higher richness and lower diversity than the V3-V4 region. After 5-day storage at 4 °C, the microbiota of unpreserved samples was characterized by a drastic decrease in diversity, and a significant shift in community structure. The treatment with azidiol and DMSO conferred the best community stabilization in preserved raw milk. Interestingly, the azidiol treatment performed as well for up to 10 days, thus appearing as a suitable alternative. However, neither azidiol nor bronopol could minimize fungal proliferation as revealed by PMA-qPCR assays. This study demonstrates the preservative ability of a mixture of azidiol and DMSO and provides deeper insights into the microbial changes occurring during the cold storage of preserved raw milk.

RESUMEN

The bronopol and kathon are chemical preservative which prevent degradation of milk samples and maintain authenticity in analysis. The detection is based on HPLC-UV-Vis spectroscopy, in which C18 column (250 mm × 4.6 mm, 5 µm) was used for chromatographic separations, with a mobile phase comprising 0.1% phosphoric acid in water: Methanol: 0.1% phosphoric acid in acetonitrile (80:10:10) at a flow rate 0.8 ml/min at ambient temperature and with the UV detection at 250 nm for bronopol and 274 nm for kathon. The retention time of bronopol, kathon (MI 2-methyl-4-isothiazolin-3-one) and kathon (CMI 5-chloro-2-methyl-4-isothiazolin-3-one) was 4.52 min, 3.98 min and 6.68 min respectively with a total run time of 10 min. The linearity of the method was satisfactory with regression coefficient (R2) = 0.99. The limit of quantification was 72, 240, 390 mg L-1 for bronopol, kathon (MI) and kathon (CMI) respectively. Five spiked levels (62.5, 125, 250, 500 and 1000 mg L-1) were used to determine the recovery of bronopol, kathon (MI) and kathon (CMI) which was found to be 95.41 ± 11.84, 95.75 ± 8.21 and 92.22 ± 14.64% respectively, with relative standard deviations in the range 5.9-14.6%. The standardized analytical method was successfully used to rapidly detect bronopol and kathon in milk samples.

RESUMEN

ABSTRACT: Ten aerobic corrosive bacterial strains were isolated from a cooling tower water system (CWS) which were identified based on the biochemical characterization and 16S rRNA gene sequencing. Out of them, dominant corrosion-causing bacteria, namely, Bacillus thuringiensis EN2, Terribacillus aidingensis EN3, and Bacillus oleronius EN9, were selected for biocorrosion studies on mild steel 1010 (MS) in a CWS. The biocorrosion behaviour of EN2, EN3, and EN9 strains was studied using immersion test (weight loss method), electrochemical analysis, and surface analysis. To address the corrosion problems, an anti-corrosive study using a biocide, bronopol was also demonstrated. Scanning electron microscopy and Fourier-transform infrared spectroscopy analyses of the MS coupons with biofilm developed after exposure to CWS confirmed the accumulation of extracellular polymeric substances and revealed that biofilms was formed as microcolonies, which subsequently cause pitting corrosion. In contrast, the biocide system, no pitting type of corrosion, was observed and weight loss was reduced about 32 ± 2 mg over biotic system (286 ± 2 mg). FTIR results confirmed the adsorption of bronopol on the MS metal surface as protective layer (co-ordination of NH2-Fe3+) to prevent the biofilm formation and inhibit the corrosive chemical compounds and thus led to reduction of corrosion rate (10 ± 1 mm/year). Overall, the results from WL, EIS, SEM, XRD, and FTIR concluded that bronopol was identified as effective biocide and corrosion inhibitor which controls the both chemical and biocorrosion of MS in CWS.

RESUMEN

A novel method has been developed for the direct, sensitive, and rapid detection of bronopol in rice using a simple solid-phase extraction (SPE) procedure followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), with electrospray ionization (ESI). Bronopol was stable under acidic conditions, and an acidic environment was thus needed before sample loading to ensure the stability of bronopol. Rice extracts containing bronopol were pretreated using a hydrophilic-lipophilic balanced (Bond Elut Plexa) cartridge to reduce the matrix effect. An XDB-C18 column (150 mm × 2.1 mm, 3.5 µm) was used for chromatographic separations, with a mobile phase comprising methanol and aqueous ammonium formate (5 mM). The linearity of the method was satisfactory with regression coefficient (R 2) = 0.9992. The limit of quantification was 3.3 µg kg-1. Three spiked levels (25, 125 and 625 µg kg-1) were used to determine the recovery of bronopol, which was found to be 73.3-96.7%, with relative standard deviations (RSD) in the range 1.2-7.9%. The RSD for intra-day precision (n = 7) was 7.6% and the RSD for inter-day precision (n = 15) was 8.3%. The newly developed analytical method was successfully used to quantify bronopol in rice samples.

Asunto(s)

RESUMEN

Milk urea N (MUN) is used by dairy nutritionists and producers to monitor dietary protein intake and is indicative of N utilization in lactating dairy cows. Two experiments were conducted to explore discrepancies in MUN results provided by 3 milk processing laboratories using different methods. An additional experiment was conducted to evaluate the effect of 2-bromo-2-nitropropane-1, 3-diol (bronopol) on MUN analysis. In experiment 1, 10 replicates of bulk tank milk samples, collected from the Pennsylvania State University's Dairy Center over 5 consecutive days, were sent to 3 milk processing laboratories in Pennsylvania. Average MUN differed between laboratory A (14.9 ± 0.40 mg/dL; analyzed on MilkoScan 4000; Foss, Hillerød, Denmark), laboratory B (6.5 ± 0.17 mg/dL; MilkoScan FT + 6000), and laboratory C (7.4 ± 0.36 mg/dL; MilkoScan 6000). In experiment 2, milk samples were spiked with urea at 0 (7.3 to 15.0 mg/dL, depending on the laboratory analyzing the samples), 17.2, 34.2, and 51.5 mg/dL of milk. Two 35-mL samples from each urea level were sent to the 3 laboratories used in experiment 1. Average analyzed MUN was greater than predicted (calculated for each laboratory based on the control; 0 mg of added urea): for laboratory A (23.2 vs. 21.0 mg/dL), laboratory B (18.0 vs. 13.3 mg/dL), and laboratory C (20.6 vs. 15.2 mg/dL). In experiment 3, replicated milk samples were preserved with 0 to 1.35 mg of bronopol/mL of milk and submitted to one milk processing laboratory that analyzed MUN using 2 different methods. Milk samples with increasing amounts of bronopol ranged in MUN concentration from 7.7 to 11.9 mg/dL and from 9.0 to 9.3 mg/dL when analyzed on MilkoScan 4000 or CL 10 (EuroChem, Moscow, Russia), respectively. In conclusion, measured MUN concentrations varied due to analytical procedure used by milk processing laboratories and were affected by the amount of bronopol used to preserve milk sample, when milk was analyzed using a mid-infrared analyzer. Thus, it is important to maintain consistency in milk sample preservation and analysis to ensure precision of MUN results.

Asunto(s)

RESUMEN

Objetivou-se com este trabalho avaliar os efeitos da temperatura e do tempo de armazenamento de amostras de leite cru refrigerado nos resultados das análises eletrônicas da qualidade do leite. Amostras de leite cru refrigerado foram coletadas de tanques de expansão de uso individual de fazendas localizadas na mesorregião Centro Goiano, no estado de Goiás, e armazenadas em quatro temperaturas diferentes (3°C, 11°C, 17°C e 25°C) durante 16 dias. Foram realizadas diariamente análises de contagem bacteriana total (CBT), contagem de células somáticas (CCS) e composição química. Os resultados obtidos foram submetidos à análise de variância em esquema de parcelas subdivididas no tempo em delineamento de blocos ao acaso, e as médias comparadas pelo teste de Duncan. Concluiu-se que as amostras destinadas à análise de CBT, adicionadas do conservante azidiol, podem ser analisadas por até 16 dias após a coleta, quando armazenadas em temperaturas de 3°C e 11°C, e por até 10 dias, quando armazenadas a 17°C. As amostras destinadas às análises de CCS e composição química, adicionadas do conservante bronopol, podem ser analisadas por até 16 dias após a coleta, quando armazenadas em temperaturas de 3°C e 11°C, e por até sete dias, quando armazenadas a 17°C.(AU)

The aim of this study was to evaluate the effects of temperature and storage time of cooled samples of raw milk on the results of milk quality electronic analysis. Refrigerated raw milk samples were collected from expansion tanks for individual use of farms located in the middle region of the state of Goiás, and stored at four different temperatures (3°C, 11°C, 17°C, and 25°C) for 16 days. Total bacterial count (TBC), somatic cell count (SCC), and chemical composition were performed daily. The results were submitted to analysis of variance in split plot design in randomized blocks, and the means were compared by Duncan test. We concluded that, when azidiol is added as preservative to samples for TBC, they can be analyzed up to 16 days after collection when stored at temperatures of 3°C and 11°C, and up to 10 days when stored at 17°C. Moreover, when bronopol is added as preservative, samples for SCC and chemical composition analysis can be stored for up to 16 days after collection when stored at temperatures of 3°C and 11°C, and for up to seven days when stored at 17°C.(AU)

Asunto(s)

RESUMEN

Vortex-assisted emulsification semimicroextraction is proposed as a one-step solution-extraction procedure for sample preparation in cosmetic products. The procedure allows rapid preparation based on dispersion of the sample in a mixture of 1 mL of n-hexane and 0.5 mL of ethanol, followed by the addition of 0.5 mL of water and centrifugation to obtain two separated phases. This procedure provides good sample clean-up with minimum dilution and is very useful for the determination of ingredients with restricted concentrations, such as bronopol. The procedure was applied to the determination of bronopol by liquid chromatography with UV detection. The best chromatographic separation was obtained by using a C18 column set at 40 °C and performing a stepwise elution with a mixture of ethanol/aqueous 1 % acetic acid solution as mobile phase pumped at 0.5 mL min(-1). The detection wavelength was set at 250 nm and the total run time required was 12 min. The method was successfully applied to 18 commercial cosmetic samples including creams, shampoos, and bath gels. Good recoveries and repeatability were obtained, with a limit of detection of 0.9 µg mL(-1), which makes the method suitable for the analytical control of cosmetic products. Moreover, it could be considered environmentally friendly, because water, ethanol, and only a low volume of n-hexane are used as solvents.

Asunto(s)