RESUMEN
Lead halide perovskite and organic semiconductors are promising classes of materials for photodetector (PD) applications. State-of-the-art perovskite PDs have performance metrics exceeding silicon PDs in the visible. While organic semiconductors offer bandgap tunability due to their chemical design with detection extended into the near-infrared (NIR), perovskites are limited to the visible band and the first fraction of the NIR spectrum. In this work, perovskite-organic heterojunction (POH) PDs with absorption up to 950 nm are designed by the dual contribution of perovskite and the donor:acceptor bulk-heterojunction (BHJ), without any intermediate layer. The effect of the energetics of the donor materials is systematically studied on the dark current (Jd) of the device by using the PBDB-T polymer family. Combining the experimental results with drift-diffusion simulations, it is shown that Jd in POH devices is limited by thermal generation via deep trap states in the BHJ. Thus, the best performance is obtained for the PM7-based POH, which delivers an ultra-low noise current of 2 × 10-14 A Hz-1/2 and high specific detectivity of 4.7 × 1012 Jones in the NIR. Last, the application of the PM7-based POH devices as NIR pulse oximeter with high-accuracy heartbeat monitoring at long-distance of 2 meters is demonstrated.
RESUMEN
2D materials-based broadband photodetectors have extensive applications in security monitoring and remote sensing fields, especially in supersonic aircraft that require reliable performance under extreme high-temperature conditions. However, the integration of large-area heterostructures with 2D materials often involves high-temperature deposition methods, and also limited options and size of substrates. Herein, a liquid-phase spin-coating method is presented based on the interface engineering to prepare larger-area Van der Waals heterojunctions of black phosphorus (BP)/reduced graphene oxide (RGO) films at room temperature on arbitrary substrates of any required size. Importantly, this method avoids the common requirement of high-temperature, and prevents the curling or stacking in 2D materials during the liquid-phase film formation. The BP/RGO films-based devices exhibit a wide spectral photo-response, ranging from the visible of 532 nm to infrared range of 2200 nm. Additionally, due to Van der Waals interface of Schottky junction, the array devices provide infrared detection at temperatures up to 400 K, with an outstanding photoresponsivity (R) of 12 A W-1 and a specific detectivity (D*) of ≈2.4 × 109 Jones. This work offers an efficient approach to fabricate large-area 2D Schottky junction films by solution-coating for high-temperature infrared photodetectors.
RESUMEN
The separation of photogenerated electron-hole pairs is crucial for the construction of high-performance and wide-band responsive photodetectors. The type-I heterojunction as a photodetector is seldomly studied due to its limited separation of the carriers and narrow optical response. In this work, we demonstrated that the high performance of type-I heterojunction as a broadband photodetector can be obtained by rational design of the band alignment and proper modulation from external electric field. The heterojunction device is fabricated by vertical stacking of non-layered MnS and WSe2 flakes. Its type-I band structure is confirmed by the first-principles calculations. The MnS/WSe2 heterojunction presents a wide optical detecting range spanning from 365 nm to 1550 nm. It exhibits the characteristics of bidirectional transportation, a current on/off ratio over 103, and an excellent photoresponsivity of 108 A W-1 in the visible range. Furthermore, the response time of the device is 19 ms (rise time) and 10 ms (fall time), which is much faster than that of its constituents MnS and WSe2. The facilitation of carrier accumulation caused by the interfacial band bending is thought to be critical to the photoresponse performance of the heterojunction. In addition, the device can operate in self-powered mode, indicating a photovoltaic effect.
RESUMEN
Two-dimensional transition metal dichalcogenide (TMDC) heterostructure is receiving considerable attention due to its novel electronic, optoelectronic, and spintronic devices with design-oriented and functional features. However, direct design and synthesis of high-quality TMDC/MnTe heterostructures remain difficult, which severely impede further investigations of semiconductor/magnetic semiconductor devices. Herein, the synthesis of high-quality vertically stacked WS2/MnTe heterostructures is realized via a two-step chemical vapor deposition method. Raman, photoluminescence, and scanning transmission electron microscopy characterizations reveal the high-quality and atomically sharp interfaces of the WS2/MnTe heterostructure. WS2/MnTe-based van der Waals field effect transistors demonstrate high rectification behavior with rectification ratio up to 106, as well as a typical p-n electrical transport characteristic. Notably, the fabricated WS2/MnTe photodetector exhibits sensitive and broadband photoresponse ranging from UV to NIR with a maximum responsivity of 1.2 × 103 A/W, a high external quantum efficiency of 2.7 × 105%, and fast photoresponse time of â¼50 ms. Moreover, WS2/MnTe heterostructure photodetectors possess a broadband image sensing capability at room temperature, suggesting potential applications in next-generation high-performance and broadband image sensing photodetectors.
RESUMEN
The growing need for the multiband photodetection of a single scene has promoted the development of both multispectral coupling and broadband detection technologies. Photodetectors operating across the infrared (IR) to terahertz (THz) regions have many applications such as in optical communications, sensing imaging, material identification, and biomedical detection. In this review, we present a comprehensive overview of the latest advances in broadband photodetectors operating in the infrared to terahertz range, highlighting their classification, operating principles, and performance characteristics. We discuss the challenges faced in achieving broadband detection and summarize various strategies employed to extend the spectral response of photodetectors. Lastly, we conclude by outlining future research directions in the field of broadband photodetection, including the utilization of novel materials, artificial microstructure, and integration schemes to overcome current limitations. These innovative methodologies have the potential to achieve high-performance, ultra-broadband photodetectors.
RESUMEN
Two-dimensional transition metal dichalcogenide (TMDC) thin films have been extensively employed in microelectronics research. Molybdenum disulfide (MoS2), as one of prominent candidates of this class, has been applied in photodetectors, integrated electronic devices, gas sensing, and electrochemical catalysis, owing to its extraordinary optoelectronic, chemical, and mechanical properties. Synthesis of MoS2crystal film is the key to its application. However, the reported technology revealed several drawbacks, containing limited surface area, prolonged high-temperature environment, and unsatisfying crystallinity. In order to enhance the convenience of MoS2applications, there is a pressing need for optimized fabrication technology, which could be quicker, with a large area, with adequate crystallinity and heat-saving. In this work, we presented an ultraviolet laser-assisted synthesis technology, accomplishing rapid growth (with the growth rate of about 40µm s-1) of centimeter-scale MoS2films at room temperature. To achieve this, we self-assembled a displaceable reaction chamber system, coupled with krypton fluoride ultraviolet pulse laser. The laser motion speed and trajectory could be customized in the software, allowing the maskless patterning of crystal films. As application, we exhibited a photodetector with the integration of synthesized MoS2and lead sulfide colloidal quantum dots (PbS CQDs), displaying broadband photodetection from ultraviolet, visible to near-infrared spectrum (365-1550 nm), with the detectivity of 109-1010Jones, and the rising time of 0.2-0.3 s. This work not only demonstrated a high-process-efficiency synthesis of TMDC materials, but also has opened up new opportunities for ultraviolet laser used in optoelectronics.
RESUMEN
The potential for various future industrial applications has made broadband photodetectors beyond visible light an area of great interest. Although most 2D van-der-Waals (vdW) semiconductors have a relatively large energy bandgap (>1.2 eV), which limits their use in short-wave infrared detection, they have recently been considered as a replacement for ternary alloys in high-performance photodetectors due to their strong light-matter interaction. In this study, a ferroelectric gating ReS2 /WSe2 vdW heterojunction-channel photodetector is presented that successfully achieves broadband light detection (>1300 nm, expandable up to 2700 nm). The staggered type-II bandgap alignment creates an interlayer gap of 0.46 eV between the valence band maximum (VBMAX ) of WSe2 and the conduction band minimum (CBMIN ) of ReS2 . Especially, the control of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) ferroelectric dipole polarity for a specific wavelength allows a high photoresponsivity of up to 6.9 × 103 A W-1 and a low dark current below 0.26 nA under the laser illumination with a wavelength of 405 nm in P-up mode. The achieved high photoresponsivity, low dark current, and full-range near infrared (NIR) detection capability open the door for next-generation photodetectors beyond traditional ternary alloy photodetectors.
RESUMEN
Self-powered broadband photodetectors have attracted great interest due to their applications in biomedical imaging, integrated circuits, wireless communication systems, and optical switches. Recently, significant research is being carried out to develop high-performance self-powered photodetectors based on thin 2D materials and their heterostructures due to their unique optoelectronic properties. Herein, a vertical heterostructure based on p-type 2D WSe2and n-type thin film ZnO is realized for photodetectors with a broadband response in the wavelength range of 300-850 nm. Due to the formation of a built-in electric field at the WSe2/ZnO interface and the photovoltaic effect, this structure exhibits a rectifying behavior with a maximum photoresponsivity and detectivity of â¼131 mA W-1and â¼3.92 × 1010Jones, respectively, under an incident light wavelength ofλ= 300 nm at zero voltage bias. It also shows a 3-dB cut-off frequency of â¼300 Hz along with a fast response time of â¼496µs, making it suitable for high-speed self-powered optoelectronic applications. Furthermore, the facilitation of charge collection under reverse voltage bias results in a photoresponsivity as high as â¼7160 mA W-1and a large detectivity of â¼1.18 × 1011Jones at a bias voltage of -5 V. Hence, the p-WSe2/n-ZnO heterojunction is proposed as an excellent candidate for high-performance, self-powered, and broadband photodetectors.
RESUMEN
High operating temperature (HOT) broadband photodetectors are urgently necessary for extreme condition applications in infrared-guided missiles, infrared night vision, fire safety imaging, and space exploration sensing. However, conventional photodetectors show dramatic carrier mobility decreases and carrier losses with low photoresponsivity at HOT due to the increased carrier scattering in channels at high temperatures. Herein, the HOT broadband photodetectors from room temperature to 470 K are developed for the first time by large-area black phosphorus (BP)/PtSe2 films device arrays via a depletion-enhanced photocarrier dynamics strategy. Attributed to the 2D Schottky junction at BP/PtSe2 interface and resulting in full depleted working channels, the BP/PtSe2 photodetector arrays exhibit high tolerance to carrier mobility decrease during the increasing operating temperature in a wide wavelength range from 532 to 2200 nm. Thus, the photodetector shows a state-of-the-art operating temperature at 470 K with the photo-responsivity (R) and specific detectivity (D*) of 25 A W-1 and 6.4 × 1011 Jones under 1850 nm illumination, respectively. Moreover, BP/PtSe2 photodetector arrays show high-uniformity photo-response in a large area. This work provides new strategies for high-performance broadband photodetector arrays with HOT by Schottky junction of large-area BP/PtSe2 films.
RESUMEN
Two-dimensional (2D) transition-metal dichalcogenides (TMDs) exhibit promising potential in fabricating highly sensitive photodetectors due to their unique electrical and optoelectrical characteristics. However, micron-sized 2D materials produced by conventional chemical vapor deposition (CVD) and mechanical exfoliation methods fail to satisfy the demands for applications in integrated optoelectronics and systems given their poor controllability and repeatability. Here, we propose a simple selenization approach to grow wafer-scale (2 in.) 2D p-WSe2 layers with high uniformity and customized patterns. Furthermore, a self-driven broadband photodetector with a p-WSe2/n-Si van der Waals heterojunction has been in situ fabricated with a satisfactory responsivity of 689.8 mA/W and a large specific detectivity of 1.59 × 1013 Jones covering from ultraviolet to short-wave infrared. In addition, a remarkable nanosecond response speed has been recorded under 0.5% duty cycle of the input light. The proposed selenization approach on the growth of 2D WSe2 layers demonstrates an effective route to fabricate highly sensitive broadband photodetectors used for integrated optoelectronic systems.
RESUMEN
A synthetic platform for industrially applicable two-dimensional (2D) semiconductors that addresses the paramount issues associated with large-scale production, wide-range photosensitive materials, and oxidative stability has not yet been developed. In this study, we attained the 6 in. scale production of 2D SnSe semiconductors with spatial homogeneity using a rational synthetic platform based on the thermal decomposition of solution-processed single-source precursors. The long-range structural and chemical homogeneities of the 2D SnSe layers are manifested using comprehensive spectroscopic analyses. Furthermore, the capability of the SnSe-based photodetectors for broadband photodetection is distinctly verified. The photoresponsivity and detectivity of the SnSe-based photodetectors are 5.89 A W-1 and 1.8 × 1011 Jones at 532 nm, 1.2 A W-1 and 3.7 × 1010 Jones at 1064 nm, and 0.14 A W-1 and 4.3 × 109 Jones at 1550 nm, respectively. The minimum rise times for the 532 and 1064 nm lasers are 62 and 374 µs, respectively. The photoelectrical analysis of the 5 × 5 SnSe-based photodetector array reveals 100% active devices with 95.06% photocurrent uniformity. We unequivocally validated that the air and thermal stabilities of the photocurrent yielded from the SnSe-based photodetector are determined to be >30 d in air and 160 °C, respectively, which are suitable for optoelectronic applications.
RESUMEN
Rapidly evolving group-10 transition metal dichalcogenides (TMDCs) offer remarkable electronic, optical, and mechanical properties, making them promising candidates for advanced optoelectronic applications. Compared to most TMDCs semiconductors, group-10-TMDCs possess unique structures, narrow bandgap, and influential physical properties that motivate the development of broadband photodetectors, specifically infrared photodetectors. This review presents the latest developments in the fabrication of broadband photodetectors based on conventional 2D TMDCs. It mainly focuses on the recent developments in group-10 TMDCs from the perspective of the lattice structure and synthesis techniques. Recent progress in group-10 TMDCs and their heterostructures with different dimensionality of materials-based broadband photodetectors is provided. Moreover, this review accounts for the latest applications of group-10 TMDCs in the fields of nanoelectronics and optoelectronics. Finally, conclusions and outlooks are summarized to provide perspectives for next-generation broadband photodetectors based on group-10 TMDCs.
RESUMEN
High-quality lead sulfide (PbS) films are deposited on selected substrate chemistries by an H2 S-free metal-organic chemical vapor deposition (MOCVD) process using a single-source metal-organic complex (Pb(dmampS)2 ). The complex is synthesized via a salt metathesis reaction between PbCl2 and lithium 1-(dimethylamino)-2-methylpropane-2-thiolate (Li(dmampS)) in diethyl ether. Subsequent film deposition is conducted by a simple thermolysis process in the absence of H2 S, yet chemical and structural analysis confirm chemically stoichiometric and homogenous films. Mechanistic studies with electron impact mass spectroscopy (EIMS) and gas chromatography mass spectroscopy (GCMS) suggest the selective cleavage of C-S bonds in the complex as the reason for the facile PbS formation with negligible impurity incorporation. The high crystallinity, low hole concentrations, and charge transport properties comparable and in many cases superior to films produced by atomic layer deposition (ALD) testify to the quality of the films. Lastly, rigid and flexible photodetectors fabricated with the PbS films exhibit considerably high photocurrents, reliable switching characteristics, and high sensitivity over a broad spectral bandwidth, highlighting the potential for realizing practical broadband photodetectors.
RESUMEN
Cu3 (HHTT)2 (HHTT: 2,3,7,8,12,13-hexahydroxytetraazanaphthotetraphene) is a novel 2D conjugated metal-organic framework (2D c-MOF) with efficient in-plane d-π conjugations and strong interlayer π-π interactions while the growth of Cu3 (HHTT)2 thin films has never been reported until now. Here, the successful fabrication of highly oriented wafer-scale Cu3 (HHTT)2 thin films with a layer-by-layer growth method on various substrates is presented. Its semiconducting behavior and carrier transport mechanisms are clarified through temperature and frequency-dependent conductivity measurements. Flexible photodetectors based on Cu3 (HHTT)2 thin films exhibit reliable photoresponses at room temperature in a wavelength region from UV to mid-IR, which is much broader than those of solution-processed broadband photodetectors reported previously. Moreover, the photodetectors can show a typical synaptic behavior and excellent data recognition accuracy in artificial neural networks. This work opens a window for the exploration of high-performance and multifunctional optoelectronic devices based on 2D c-MOFs.
RESUMEN
Broadband photodetectors are of great importance for numerous optoelectronic applications. Two-dimensional (2D) tungsten disulfide (WS2), an important family member of transition-metal dichalcogenides (TMDs), has shown great potential for high-sensitivity photodetection due to its extraordinary properties. However, the inherent large bandgap of WS2 and the strong interface recombination impede the actualization of high-sensitivity broadband photodetectors. Here, we demonstrate the fabrication of an ultrabroadband WS2/Ge heterojunction photodetector through defect engineering and interface passivation. Thanks to the narrowed bandgap of WS2 induced by the vacancy defects, the effective surface modification with an ultrathin AlOx layer, and the well-designed vertical n-n heterojunction structure, the WS2/AlOx/Ge photodetector exhibits an excellent device performance in terms of a high responsivity of 634.5 mA/W, a large specific detectivity up to 4.3 × 1011 Jones, and an ultrafast response speed. Significantly, the device possesses an ultrawide spectral response spanning from deep ultraviolet (200 nm) to mid-wave infrared (MWIR) of 4.6 µm, along with a superior MWIR imaging capability at room temperature. The detection range has surpassed the WS2-based photodetectors in previous reports and is among the broadest for TMD-based photodetectors. Our work provides a strategy for the fabrication of high-performance ultrabroadband photodetectors based on 2D TMD materials.
RESUMEN
A high-speed and broadband 5 × 5 photodetector array based on MoS2 /In0.53 Ga0.47 As heterojunction is successfully demonstrated to take full advantage of the type-II band-aligned multilayer MoS2 /In0.53 Ga0.47 As. The fabricated devices exhibit good uniformity in the Raman spectrum and clear rectifying characteristics. The fabricated MoS2 /In0.53 Ga0.47 As photodetectors show good optical performances at a broad wavelength range showing high responsivities corresponding to the detectivity of ≈1010 Jones at -3 V for the incident broadband light from 400 to 1550 nm. A very fast photoresponse is also obtained with a small rise/fall time in the order of microseconds both for visible (638 nm) and shortwave infrared (1310 nm). Finally, the image scanning properties of MoS2 /In0.53 Ga0.47 As devices are demonstrated for visible and infrared light, indicating that the suggested device is one of the promising options for future broadband imager, which can be integrated on the focal plane arrays (FPAs).
RESUMEN
Platinum telluride (PtTe2) has garnered significant research enthusiasm owing to its unique characteristics. However, large-scale synthesis of PtTe2 toward potential photoelectric and photovoltaic application has not been explored yet. Herein, we report direct tellurization of Pt nanofilms to synthesize large-area PtTe2 films and the influence of growth conditions on the morphology of PtTe2. Electrical analysis reveals that the as-grown PtTe2 films exhibit typical semimetallic behavior, which is in agreement with the results of first-principles density functional theory (DFT) simulation. Moreover, the combination of multilayered PtTe2 and Si results in the formation of a PtTe2/Si heterojunction, exhibiting an obvious rectifying effect. Moreover, the PtTe2-based photodetector displays a broadband photoresponse to incident radiation in the range of 200-1650 nm, with the maximum photoresponse at a wavelength of â¼980 nm. The R and D* of the PtTe2-based photodetector are found to be 0.406 A W-1 and 3.62 × 1012 Jones, respectively. In addition, the external quantum efficiency is as high as 32.1%. On the other hand, the response time of τrise and τfall is estimated to be 7.51 and 36.7 µs, respectively. Finally, an image sensor composed of a 8 × 8 PtTe2-based photodetector array was fabricated, which can record five near-infrared (NIR) images under 980 nm with a satisfying resolution. The result demonstrates that the as-prepared PtTe2 material will be useful for application in NIR optoelectronics.
RESUMEN
Atomically thin materials face an ongoing challenge of scalability, hampering practical deployment despite their fascinating properties. Tin monosulfide (SnS), a low-cost, naturally abundant layered material with a tunable bandgap, displays properties of superior carrier mobility and large absorption coefficient at atomic thicknesses, making it attractive for electronics and optoelectronics. However, the lack of successful synthesis techniques to prepare large-area and stoichiometric atomically thin SnS layers (mainly due to the strong interlayer interactions) has prevented exploration of these properties for versatile applications. Here, SnS layers are printed with thicknesses varying from a single unit cell (0.8 nm) to multiple stacked unit cells (≈1.8 nm) synthesized from metallic liquid tin, with lateral dimensions on the millimeter scale. It is reveal that these large-area SnS layers exhibit a broadband spectral response ranging from deep-ultraviolet (UV) to near-infrared (NIR) wavelengths (i.e., 280-850 nm) with fast photodetection capabilities. For single-unit-cell-thick layered SnS, the photodetectors show upto three orders of magnitude higher responsivity (927 A W-1 ) than commercial photodetectors at a room-temperature operating wavelength of 660 nm. This study opens a new pathway to synthesize reproduceable nanosheets of large lateral sizes for broadband, high-performance photodetectors. It also provides important technological implications for scalable applications in integrated optoelectronic circuits, sensing, and biomedical imaging.
RESUMEN
In this study, for the first time, the integration of nontoxic ternary copper halide Cs3Cu2I5 with one-dimensional Si nanowires (NWs) was reported to achieve an ultraviolet (UV)-enhanced Si NW broadband photodetector. A compact and uniform coverage of Cs3Cu2I5 on the top and sidewall of Si NWs formed a core/shell heterostructure, in which Si NWs served as the growth template and the electron-transport layer, and Cs3Cu2I5 was employed as the UV photoactive material and the hole-transport layer. The as-fabricated Cs3Cu2I5/Si-core/shell NW photodetector demonstrates a multiband photodetection from the deep UV to near-infrared region, a fast response speed of 92.5/189.2 µs (265 nm), and a high photoresponsivity of 130 mA/W, nearly 600 times as much as the reference device constructed using Si NWs. More importantly, the proposed photodetector exhibits an excellent stability in air ambient. Typically, it could endure a high temperature of 60 °C for 11 h consecutive working; after storage in air ambient for two weeks, its photodetection ability can almost be retained. Additionally, high-resolution UV imaging applications were presented by employing the proposed photodetector as sensing pixels. These obtained results verify the effectiveness of the Cs3Cu2I5/Si-core/shell NW heterojunction strategy for UV-enhanced broadband photodetection, making such a device really possible for practical applications.
RESUMEN
Metal-organic frameworks (MOFs) are emerging as an appealing class of highly tailorable electrically conducting materials with potential applications in optoelectronics. Yet, the realization of their proof-of-concept devices remains a daunting challenge, attributed to their poor electrical properties. Following recent work on a semiconducting Fe3 (THT)2 (NH4 )3 (THT: 2,3,6,7,10,11-triphenylenehexathiol) 2D MOF with record-high mobility and band-like charge transport, here, an Fe3 (THT)2 (NH4 )3 MOF-based photodetector operating in photoconductive mode capable of detecting a broad wavelength range from UV to NIR (400-1575 nm) is demonstrated. The narrow IR bandgap of the active layer (≈0.45 eV) constrains the performance of the photodetector at room temperature by band-to-band thermal excitation of charge carriers. At 77 K, the device performance is significantly improved; two orders of magnitude higher voltage responsivity, lower noise equivalent power, and higher specific detectivity of 7 × 108 cm Hz1/2 W-1 are achieved under 785 nm excitation. These figures of merit are retained over the analyzed spectral region (400-1575 nm) and are commensurate to those obtained with the first demonstrations of graphene- and black-phosphorus-based photodetectors. This work demonstrates the feasibility of integrating conjugated MOFs as an active element into broadband photodetectors, thus bridging the gap between materials' synthesis and technological applications.