RESUMEN
To understand the fracture properties of the nitrate ester plasticized polyether (NEPE) propellant, single-edge notched tension (SENT) tests were carried out at room temperature (20 °C) under different tensile rates (10-500 mm/min). The mechanical response, crack morphology, evolution path, and crack propagation velocity during the fracture process were studied using a combination of a drawing machine and a high-speed camera. The mode I critical stress intensity factor KIc was calculated to analyze the tensile fracture toughness of the NEPE propellant, and a criterion related to KIc was proposed as a means of determining whether the solid rocket motors can normally work. The experimental results demonstrated that the NEPE propellant exhibited blunting fracture phenomena during crack propagation, resulting in fluctuating crack propagation velocity. The fracture toughness of the NEPE propellant exhibited clear rate dependence. When the tensile rate increased from 10 mm/min to 500 mm/min, the magnitude of the critical stress intensity factor increased by 62.3%. Moreover, numerical studies based on bond-based peridynamic (BBPD) were performed by modeling the fracture process of the NEPE propellant, including the crack propagation speed and the load-displacement curve of the NEPE propellant. The simulation results were then compared with the experiments.
RESUMEN
The prediction of damage and failure to fiber-reinforced polymer composites in extreme environments, particularly when subjected to impact loading, is a crucial issue for the application and design of protective structures. In this paper, based on the prototype microelastic brittle (PMB) model and the LaRC05 composite materials failure model, we proposed a bond-based peridynamic (BB-PD) model with the introduction of plastic hardening of the resin matrix for fiber-reinforced polymer composites. The PD constitutive relationships of the matrix bond and interlayer bond under compressive loading are considered to include two stages of linear elasticity and plastic hardening, according to the stress-strain relationship of the resin matrix in the LaRC05 failure model. The proposed PD model is employed to simulate the damage behaviors of laminated composites subjected to impact loading. The corresponding ballistic impact tests of composite laminates were carried out to observe their damage behaviors. The PD prediction results are in good agreement with the ballistic experimental results, which can verify the correctness and accuracy of the PD model developed in this study in describing the impact damage behaviors of composite materials. In addition, the characteristics and degree of damage in composite laminates are analyzed and discussed based on this PD model. The difference in the impact resistance of composite laminates with different stacking sequences is also studied using the numerical simulation results.