RESUMEN

Mannitol, one of the most widespread sugar alcohols, has been integral to daily human life for two centuries. Global population growth and competition for freshwater, food, and land have prompted a shift in the fermentation industry from terrestrial to marine raw materials. Mannitol is a readily available carbohydrate in brown seaweed from the ocean and possess a higher reducing power than glucose, making it a promising substrate for biological manufacturing. This has spurred numerous explorations into converting mannitol into high-value chemicals. Researchers have engineered microorganisms to utilize mannitol in various synthetic biological applications, including: (1) employing mannitol as an inducer to control the activation and deactivation of genetic circuits; (2) using mannitol as a carbon source for synthesizing high-value chemicals through biomanufacturing. This review summarizes the latest advances in the application of mannitol in synthetic biology. AIM OF REVIEW: The aim is to present a thorough and in-depth knowledge of mannitol, a marine carbon source, and then use this carbon source in synthetic biology to improve the competitiveness of biosynthetic processes. We outlined the methods and difficulties of utilizing mannitol in synthetic biology with a variety of microbes serving as hosts. Furthermore, future research directions that could alleviate the carbon catabolite repression (CCR) relationship between glucose and mannitol are also covered. EXPECTED CONTRIBUTIONS OF REVIEW: Provide an overview of the current state, drawbacks, and directions for future study on mannitol as a carbon source or genetic circuit inducer in synthetic biology.

RESUMEN

Glycyrrhetinicacid (GA) is a high-value pentacyclic triterpenoid with broad applications. However, the industrial production of GA is hindered by low yield and the accumulation of the intermediate product GlycyrrhetinicAcid3-O-Mono-ß-D-Glucuronide (GAMG). This study first identified a novel ß-glucuronidase (AcGUS) from Aspergillus calidoustus CLH-22 through transcriptomic analysis, demonstrating a substrate preference for GAMG. Subsequently, mutant AcGUS3G461C/Q462H/I575K with significantly improved activity (kcat/Km of 11.02-fold) was obtained via computer-aided engineering. Furthermore, the dual-GUS combination strategy was employed for the first timeto construct engineered Pichia pastoris for GA production, offering multiple advantages of enhanced conversion efficiency and reduced fermentation viscosity. Finally, under systematically optimized conditions and employing Glycyrrhizin (GL) as the substrate, the final concentration of GA was 48.73 g/L with a conversion of 97.26 % in a 1000-L fermenter, representing the optimal biocatalytic performance reported to date. This study provides new ideas and insights for industrial GA production.

RESUMEN

Bacterioruberin is widely used in medicine, food, and cosmetics owing to its prominent characteristics of antioxidants and bioactivities. Bioconversion of methane into bacterioruberin is a promising way to address biomanufacturing substrate costs and greenhouse gas emissions but has not been achieved yet. Herein, this study aimed to upcycle methane to bacterioruberin by microbial consortia. The microbial consortia consist of Methylomonas and Methylophilus capable of synthesizing carotenoids from methane was firstly enriched from paddy soil. Through this microbial community, methane was successfully converted into C50 bacterioruberin for the first time. The bioconversion process was then optimized by the response surface methodology. Finally, the methane-derived bacterioruberin reached a record yield of 280.88 ± 2.94 µg/g dry cell weight. This study presents a cost-effective and eco-friendly approach for producing long-chain carotenoids from methane, offering a significant advancement in the direct conversion of greenhouse gases into value-added products.

Asunto(s)

RESUMEN

Plants offer a promising chassis for the large-scale, cost-effective production of diverse therapeutics, including antimicrobial peptides (AMPs). However, key advances will reduce production costs, including simplifying the downstream processing and purification steps. Here, using Nicotiana benthamiana plants, we present an improved modular design that enables AMPs to be secreted via the endomembrane system and sequestered in an extracellular compartment, the apoplast. Additionally, we translationally fused an AMP to a mutated small ubiquitin-like modifier sequence, thereby enhancing peptide yield and solubilizing the peptide with minimal aggregation and reduced occurrence of necrotic lesions in the plant. This strategy resulted in substantial peptide accumulation, reaching around 2.9 mg AMP per 20 g fresh weight of leaf tissue. Furthermore, the purified AMP demonstrated low collateral toxicity in primary human skin cells, killed pathogenic bacteria by permeabilizing the membrane and exhibited anti-infective efficacy in a preclinical mouse (Mus musculus) model system, reducing bacterial loads by up to three orders of magnitude. A base-case techno-economic analysis demonstrated the economic advantages and scalability of our plant-based platform. We envision that our work can establish plants as efficient bioreactors for producing preclinical-grade AMPs at a commercial scale, with the potential for clinical applications.

RESUMEN

Cell-based therapies are revolutionizing medicine by replacing or modifying dysfunctional cells with healthy cells or engineered derivatives, offering disease reversal and cure. One promising approach is using cell-derived extracellular vesicles (EVs), which offer therapeutic benefits similar to cell transplants without the biosafety risks. Although EV applications face challenges like limited production, inadequate therapeutic loading, and poor targeting efficiency, recent advances in bioengineering have enhanced their effectiveness. Herein, we summarize technological breakthroughs in EV bioengineering over the past 5 years, highlighting their improved therapeutic functionalities and potential clinical prospects. We also discuss biomanufacturing processes, regulation, and safety considerations for bioengineered EV therapies, emphasizing the significance of establishing robust frameworks to ensure translation capability, safety, and therapeutic effectiveness for successful clinical adoption.

RESUMEN

Probiotic extracellular vesicles are biochemically active structures responsible for biological effects elicited by probiotic bacteria. Lactobacillus spp., which are abundant in the human body (e.g., gut), are known to have anti-inflammatory and antimicrobial properties, and are commonly used in food products, supplements, and in discovery research. There is increasing evidence that Lactobacillus-derived extracellular vesicles (LREVs) have potent immunomodulatory capacity that is superior to probiotics themselves. However, key mechanistic insights into the process that controls production and thus, the function of LREVs, are lacking. Currently, it is unknown how the probiotic culture microenvironment orchestrates the type, yield and function of LREVs. Here, we investigated how multifactor modulation of the biomanufacturing process controls the yield and biological functionality of the LREVs. To achieve this, we selected Lacticaseibacillus rhamnosus as the candidate probiotic, initially cultivated under traditional culture conditions, i.e., 100% broth concentration and pH 5.5. Subsequently, we systematically modified the culture conditions of the probiotic by adjusting three critical process parameters: (1) culture medium pH (pH 3.5, 5.5 and 7.5), (2) growth time (48 and 72 h), and (3) broth concentration (50% and 10% of original broth concentration). EVs were then isolated separately from each condition. The critical quality attributes (CQA) of LREVs, including physical characteristics (size, distribution, concentration) and biological composition (protein, carbohydrate, lipid), were analysed. Functional impacts of LREVs on human epidermal keratinocytes and Staphylococcus aureus were also assessed as CQA. Our findings show that the production of LREVs is influenced by environmental stresses induced by the culture conditions. Factors like broth concentration, pH levels, and growth time significantly impact stress levels in L. rhamnosus, affecting both the production and composition of LREVs. Additionally, we have observed that LREVs are non-toxicity for keratinocytes, the major cell type of the epidermis, and possess antimicrobial properties against S. aureus, a common human skin pathogen. These properties are prerequisites for the potential application of EVs to treat skin conditions, including infected wounds. However, the functionality of LREVs depends on the culture conditions and stress levels experienced by L. rhamnosus during production. Understanding this relationship between the culture microenvironment, probiotic stress response, and LREV characteristics, can lead to the biomanufacturing of customised probiotic-derived EVs for various medical and industrial applications.

RESUMEN

Producing recombinant adeno-associated virus (rAAV) for gene therapy via triple transfection is an intricate process involving many cellular interactions. Each of the different elements encoded in the three required plasmids-pHelper, pRepCap, and pGOI-plays a distinct role, affecting different cellular pathways when producing rAAVs. The required expression balance emphasizes the critical need to fine-tune the concentration of all these different elements. The use of design of experiments (DOE) to find optimal ratios is a powerful method to streamline the process. However, the choice of the DOE method and design construction is crucial to avoid misleading results. In this work, we examined and compared four distinct DOE approaches: rotatable central composite design (RCCD), Box-Behnken design (BBD), face-centered central composite design (FCCD), and mixture design (MD). We compared the abilities of the different models to predict optimal ratios and interactions among the plasmids and the transfection reagent. Our findings revealed that blocking is essential to reduce the variability caused by uncontrolled random effects and that MD coupled with FCCD outperformed all other approaches, improving volumetric productivity 109-fold. These outcomes underscore the importance of selecting a model that can effectively account for the biological context, ultimately yielding superior results in optimizing rAAV production.

RESUMEN

Droplets, tiny liquid compartments, are increasingly emerging in the biomedical and biomanufacturing fields due to their unique properties to serve as templates or independent reaction units. Currently, the straightforward and efficient generation of various functional droplets in a biofriendly manner remains challenging. Herein, a novel microfluidic-assisted pneumatic strategy is described for the customizable and high-throughput production of monodispersed droplets, and the droplet size can be precisely controlled via a simplified gas pressure regulation module. In particular, numerous uniform alginate microcarriers can be rapidly fabricated in an all-aqueous manner, wherein the encapsulated islet or liver cells exhibit favorable viability and biological functions. Furthermore, by changing the microchannel configuration, several fluid manipulation functions developed by microfluidic technology, such as mixing and laminar flow, can be successfully incorporated into this platform. The droplet generators with scalable functionality are demonstrated in many biomanufacturing scenarios, including on-demand distribution of cell-mimetic particles, continuous synthesis of biomedical metal-organic framework (MOF), controllable preparation of compartmental microgel, etc. These may provide sustainable inspiration for developing droplet generators and their applications in tissue and organ engineering, biomaterials design, bioprinting nozzles, and other fields.

RESUMEN

Industrial biotechnology heavily relies on the microbial conversion of carbohydrate substrates derived from sugar- or starch-rich crops. This dependency poses significant challenges in the face of a rising population and food scarcity. Consequently, exploring renewable, non-competing carbon sources for sustainable bioprocessing becomes increasingly important. Ethanol, a key C2 feedstock, presents a promising alternative, especially for producing acetyl-CoA derivatives. In this review, we offer an in-depth analysis of ethanol's potential as an alternative carbon source, summarizing its distinctive characteristics when utilized by microbes, microbial ethanol metabolism pathway, and microbial responses and tolerance mechanisms to ethanol stress. We provide an update on recent progress in ethanol-based biomanufacturing and ethanol biosynthesis, discuss current challenges, and outline potential research directions to guide future advancements in this field. The insights presented here could serve as valuable theoretical support for researchers and industry professionals seeking to harness ethanol's potential for the production of high-value products.

RESUMEN

With the rapid development of the medical beauty industry, functional skin care products become increasingly popular. The functions of cosmetics mainly depend on the active ingredients, which are mainly proteins, peptides, polysaccharides, phenolic acids, terpenes, vitamins, and amino acids. These active ingredients endow cosmetics with skin repairing, moistening, whitening, UV protecting, and anti-aging effects. They are mainly obtained through biological extraction and chemical synthesis. In recent years, with the development of biomanufacturing, microbial synthesis of active ingredients in cosmetics has been widely studied and applied. This article reviews the research progresses in the production of natural products including collagens, peptides, hyaluronic acid, polyphenols, terpenes, and vitamins by microbial synthetic biotechnology. Moreover, this article highlighted the synthetic pathways, metabolic regulation, and prospects of the natural products, providing a reference for subsequent microbial synthesis of active ingredients in cosmetics.

Asunto(s)

RESUMEN

Succinic acid is an important C4 platform compound that serves as a raw material for the production of 1,4-butanediol, tetrahydrofuran, and biodegradable plastics such as polybutylene succinate (PBS). Compared to the traditional petrochemical-based route that uses maleic anhydride as a raw material, the microbial fermentation method for producing succinic acid offers more sustainable economic value and environmental friendliness. Yeasts with good acid tolerance can achieve low-pH fermentation of succinic acid, significantly reducing the cost of product extraction. Therefore, constructing high-yield succinic acid yeast strains through metabolic engineering has garnered increasing attention. This paper systematically introduced the application value and market size of succinic acid, summarized the pathways and key enzymes involved in succinic acid synthesis in microorganisms, and elaborated on the latest research progress in the synthesis of succinic acid using yeast cell factories. It also presented the current status of succinic acid synthesis using non-food raw materials such as glycerol, acetic acid, lignocellulosic hydrolysate, and others as substrates by engineered yeast strains. Finally, the paper provided a prospect for low-pH succinic acid biomanufacturing based on yeast cell factories.

Asunto(s)

RESUMEN

Propionic acid as an important C3 platform chemical has been widely used in food, pharmaceutical, and chemical fields. The chemical synthesis of propionic acid from petroleum and other chemical products has serious environmental pollution and is not sustainable. In recent years, the production of propionic acid by microbial transformation of renewable resources has received extensive attention. Focusing on the biomanufacturing of propionic acid, this paper firstly reviews the studies about the metabolic engineering of Propionibacterium and the pathway reconstruction in heterogeneous hosts such as Escherichia coli and Saccharomyces cerevisiae. Secondly, this paper reviews the recent progress in the synthesis of high-purity propionic acid from L-threonine or bio-based 1, 2-propanediol by the design and modification of the pathway of Pseudomonas putida KT2440 based on synthetic biology.

Asunto(s)

RESUMEN

Biomedical research has witnessed significant strides in manufacturing chimeric antigen receptor T cell (CAR-T) therapies, marking a transformative era in cellular immunotherapy. Nevertheless, existing manufacturing methods for autologous cell therapies still pose several challenges related to cost, immune cell source, safety risks, and scalability. These challenges have motivated recent efforts to optimize process development and manufacturing for cell therapies using automated closed-system bioreactors and models created using artificial intelligence. Simultaneously, non-viral gene transfer methods like mRNA, CRISPR genome editing, and transposons are being applied to engineer T cells and other immune cells like macrophages and natural killer cells. Alternative sources of primary immune cells and stem cells are being developed to generate universal, allogeneic therapies, signaling a shift away from the current autologous paradigm. These multifaceted innovations in manufacturing underscore a collective effort to propel this therapeutic approach toward broader clinical adoption and improved patient outcomes in the evolving landscape of cancer treatment. Here, we review current CAR immune cell manufacturing strategies and highlight recent advancements in cell therapy scale-up, automation, process development, and engineering.

Asunto(s)

RESUMEN

Despite its prominence, the ability to engineer Cupriavidus necator H16 for inorganic carbon uptake and fixation is underexplored. We tested the roles of endogenous and heterologous genes on C. necator inorganic carbon metabolism. Deletion of ß-carbonic anhydrase can had the most deleterious effect on C. necator autotrophic growth. Replacement of this native uptake system with several classes of dissolved inorganic carbon (DIC) transporters from Cyanobacteria and chemolithoautotrophic bacteria recovered autotrophic growth and supported higher cell densities compared to wild-type (WT) C. necator in batch culture. Strains expressing Halothiobacillus neopolitanus DAB2 (hnDAB2) and diverse rubisco homologs grew in CO2 similarly to the wild-type strain. Our experiments suggest that the primary role of carbonic anhydrase during autotrophic growth is to support anaplerotic metabolism, and an array of DIC transporters can complement this function. This work demonstrates flexibility in HCO3- uptake and CO2 fixation in C. necator, providing new pathways for CO2-based biomanufacturing.

Asunto(s)

RESUMEN

Enabling the transition towards a future circular bioeconomy based on industrial biomanufacturing necessitates the development of efficient and versatile microbial platforms for sustainable chemical and fuel production. Recently, there has been growing interest in engineering non-model microbes as superior biomanufacturing platforms due to their broad substrate range and high resistance to stress conditions. Among these non-conventional microbes, red yeasts belonging to the genus Rhodotorula have emerged as promising industrial chassis for the production of specialty chemicals such as oleochemicals, organic acids, fatty acid derivatives, terpenoids, and other valuable compounds. Advancements in genetic and metabolic engineering techniques, coupled with systems biology analysis, have significantly enhanced the production capacity of red yeasts. These developments have also expanded the range of substrates and products that can be utilized or synthesized by these yeast species. This review comprehensively examines the current efforts and recent progress made in red yeast research. It encompasses the exploration of available substrates, systems analysis using multi-omics data, establishment of genome-scale models, development of efficient molecular tools, identification of genetic elements, and engineering approaches for the production of various industrially relevant bioproducts. Furthermore, strategies to improve substrate conversion and product formation both with systematic and synthetic biology approaches are discussed, along with future directions and perspectives in improving red yeasts as more versatile biotechnological chassis in contributing to a circular bioeconomy. The review aims to provide insights and directions for further research in this rapidly evolving field. Ultimately, harnessing the capabilities of red yeasts will play a crucial role in paving the way towards next-generation sustainable bioeconomy.

Asunto(s)

RESUMEN

Scalable single-use adherent cell-based biomanufacturing platforms are essential for unlocking the full potential of cell and gene therapies. The primary objective of this study is to design and develop a novel fixed bed bioreactor platform tailored specifically for scaling up adherent cell culture. The bioreactor comprises a packed bed of vertically stacked woven polyethylene terephthalate mesh discs, sandwiched between two-fluid guide plates. Leveraging computational fluid dynamics modeling, we optimized bioreactor design to achieve uniform flow with minimal shear stress. Residence time distribution measurements demonstrated excellent flow uniformity with plug flow characteristics. Periodic media sampling coupled with offline analysis revealed minimal gradients of crucial metabolites (glucose, glutamine, lactate, and ammonia) across the bioreactor during cell growth. Furthermore, the bioreactor platform demonstrated high performance in automated cell harvesting, with ≈96% efficiency and ≈98% viability. It also exhibited linear scalability in both operational parameters and performance for cell culture and adeno-associated virus vector production. We developed mathematical models based on oxygen uptake rates to accurately predict cell growth curves and estimate biomass in real-time. This study demonstrates the effectiveness of the developed fixed-bed bioreactor platform in enabling scalable adherent cell-based biomanufacturing with high productivity and process control.

Asunto(s)

RESUMEN

Artificial biomanufacturing has been developed as a promising biotechnology for water pollution control. Effective bioimmobilization techniques are limited in application because of low productivity and the difficulty in achieving both mechanical strength and biocompatibility. Bioprinting technology, using biomaterials as bioink to enable the rapid on-demand production of bioactive structures, opens a new path for bioimmobilization. In this study, mimicking extracellular polysaccharide and protein of aerobic granular sludge (AGS), sodium alginate (SA) and silk fibroin methacryloyl (SilMA) were developed as the dual-component bioink with a suitable viscosity for bioprinting hydrogel. Interpenetrating network (IPN) hydrogel beads were manufactured using 1.5% (w/v) SA combined with 20% (w/v) SilMA through physical and covalent crosslinking, which exhibited excellent structural stability and bioactivity. The addition of SilMA provided a solution to the poor mechanical stability of SA-Ca hydrogels limited by Ca2+-Na+ ionic exchange. The unique structure of SilMA contributed to the reduction of hydrogel swelling as well as the prevention of SA loss. IPN hydrogels showed a swelling rate of less than 20% compared to the high swelling rate of more than 60% for SA hydrogels. On the other hand, SA controlled the hardening induced by excessive self-assembly of SilMA and improved mass transport in SilMA hydrogels. Compared to IPN hydrogels, SilMA hydrogels experienced a 15% volumetric shrinkage and exhibited a low water content of 92%. Sonication pretreatment of the dual-component bioink not only increased the intermolecular chain entanglement to form IPN, but also led to ß-sheet content in SiMA reaching 46%-48%, which resulted in the formation of stable IPN hydrogels dominated entirely by physical crosslinking. Satisfactory proliferation and viability were achieved for the encapsulated bacteria in IPN hydrogels (µmax 1.49-2.18 d-1). Further, the IPN biohydrogels could maintain structural stability as well as achieve pollutant removal for treating synthetic wastewater with high Na+ concentration of 300 mg/L. The novel SA/SilMA hydrogel bioprinting strategy established in this study offers a new direction for bioimmobilization in water pollution control and other environmental applications.

RESUMEN

Bacillus methanolicus is a thermophilic methylotrophic bacterium that grows quickly on methanol in sea water-based media. It has been engineered for chemical bioproduction from methanol, but its efficiency needs improvement for industrialization. Synthetic biology approaches such as metabolic modeling and genome editing can reprogram B. methanolicus for low-carbon biomanufacturing.

RESUMEN

Nanobodies are single-domain antibody fragments that have garnered considerable use as diagnostic and therapeutic agents as well as research tools. However, obtaining pure VHHs, like many proteins, can be laborious and inconsistent. High level cytoplasmic expression in E. coli can be challenging due to improper folding and insoluble aggregation caused by reduction of the conserved disulfide bond. We report a systems engineering approach leveraging engineered strains of E. coli, in combination with a two-stage process and simplified downstream purification, enabling improved, robust, soluble cytoplasmic nanobody expression, as well as rapid cell autolysis and purification. This approach relies on the dynamic control over the reduction potential of the cytoplasm, incorporates lysis enzymes for purification, and can also integrate dynamic expression of protein folding catalysts. Collectively, the engineered system results in more robust growth and protein expression, enabling efficient scalable nanobody production, and purification from high throughput microtiter plates, to routine shake flask cultures and larger instrumented bioreactors. We expect this system will expedite VHH development.

Asunto(s)