RESUMEN

Bioelectronic bone implants are being widely recognized as a promising technology for highly personalized bone/implant interface sensing and biophysical therapeutic stimulation. Such bioelectronic devices are based on an innovative concept with the ability to be applied to a wide range of implants, including in fixation and prosthetic systems. Recently, biointerface sensing using capacitive patterns was proposed to overcome the limitations of standard imaging technologies and other non-imaging technologies; moreover, electric stimulation using capacitive patterns was proposed to overcome the limitations of non-instrumented implants. We here provide an innovative low-power miniaturized electronic system with ability to provide both therapeutic stimulation and bone/implant interface monitoring using network-architectured capacitive interdigitated patterns. It comprises five modules: sensing, electric stimulation, processing, communication and power management. This technology was validated using in vitro tests: concerning the sensing system, its ability to detect biointerface changes ranging from tiny to severe bone-implant interface changes in target regions was validated; concerning the stimulation system, its ability to significantly enhance bone cells' full differentiation, including matrix maturation and mineralization, was also confirmed. This work provides an impactful contribution and paves the way for the development of the new generation of orthopaedic biodevices.

Asunto(s)

RESUMEN

The management of extensive tracheal resection followed by circumferential replacement remains a surgical challenge. Numerous techniques are proposed with mixed results. Partial decellularization of the trachea with the removal of the mucosal and submucosal cells is a promising method, reducing immunogenicity while preserving the biomechanical properties of the final matrix. Despite many research protocols and proofs of concept, no standardized clinical grade protocol is described. Furthermore, local and systemic biointegration mechanisms of decellularized trachea are not well known. Therefore, in a translational research perspective, this work set up a partial tracheal decellularization protocol in line with Cell and Tissue Products regulations. Extensive characterization of the final product is performed in vitro and in vivo. The results show that the Partially Decellularized Trachea (PDT) is cell-free in the mucosa and submucosa, while the cartilage structure is preserved, maintaining the biomechanical properties of the trachea. When implanted in the muscle in vivo for 28 days, no systemic inflammation is observed, and locally, the PDT shows an excellent biointegration and vascularization. No signs of graft rejection are observed. These encouraging results confirmed the efficacy of the clinical grade PDT production protocol, which is an important step for future clinical applications.

RESUMEN

Full Circumferential Tracheal Replacement (FCTR) is a surgical challenge, indicated in rare cases of extensive tracheal resection, with no consensus on surgical technique or materials. A systematic review according to PRISMA guidelines was carried out from 2000 to 2022 to identify cases of FCTR, to compare surgical indications, the nature of the tracheal substitutes and their immunological characteristics, surgical replacement techniques and vascularization. Thirty-seven patients, including five children, underwent FCTR surgery using 4 different techniques: thyrotracheal complex allograft (n = 2), aorta (n = 12), autologous surgical reconstruction (n = 19), tissue-engineered decellularized trachea (n = 4). The mean follow-up was 4 years. Of the 15 deceased patients, 10 died of the progression of the initial pathology. For the majority of the teams, particular care was given to the vascularization of the substitute, in order to guarantee long-term biointegration. This included either direct vascularization via vascular anastomosis, or an indirect technique involving envelopment of the avascular substitute in a richly vascularized tissue. Stent placement was standard, except for autologous surgical reconstructions where tracheal caliber was stable. Internal stents were frequently complicated by granulation and stenosis. Although epithelial coverage is essential to limit endoluminal proliferation and act as a barrier, fully functional ciliated airway epithelium did not seem to be necessary. In order to facilitate future comparisons, a standardized clinical trial, respecting regulatory constraints, including routine follow-up with tracheal biomechanics assessment and scheduled biopsies could be proposed. It would help collecting information such as dynamics and mechanisms of tracheal bio-integration and regeneration.

Asunto(s)

RESUMEN

The review critically evaluates the current state of studies investigating laser irradiation for modifying titanium surfaces to enhance the biointegration of dental implants. Laser modification is a rapidly evolving physicochemical surface modification process with the potential to revolutionize dental implant technology. A thorough search of electronic databases, including PubMed, Science Direct, MEDLINE, and Web of Knowledge, was conducted to identify relevant articles. The review focuses on the surface features of laser-modified implants, encompassing in vitro cell culture experiments, rare animal experiments, and limited clinical trials. Of the 26 selected sources, 21 describe surface features, while only two involve in vivo human experiments. The review highlights the lack of long-term clinical experience and calls for further research to mature these technologies. Despite the absence of a consensus on optimal laser types and settings, the overall results are promising, with few negative outcomes. As research in laser irradiation of titanium surfaces progresses, significant advancements in dental implant technology and improved patient well-being are anticipated.

Asunto(s)

RESUMEN

Keratoprosthesis (KPro) implantation is frequently the only recourse for patients with severe corneal disease. However, problems arise due to inadequate biointegration of the KPro, particularly the PMMA optical cylinder, such as tissue detachment, tissue melting, or eye-threatening infection in the interface. Here, using the AuroKPro as a model prosthesis, a surface functionalization approach─coating the optical cylinder with nanohydroxyapatite (nHAp)─was trialed in rabbit eyes with and without a proceeding chemical injury. In chemically injured eyes, which simulated total limbal epithelial stem cell deficiency, clear benefits were conferred by the coating. The total modified Hackett-McDonald score and area of tissue apposition differences 12 weeks after implantation were 5.0 and 22.5%, respectively. Mechanical push-in tests revealed that 31.8% greater work was required to detach the tissues. These differences were less marked in uninjured eyes, which showed total score and tissue apposition differences of 2.5 and 11.5%, respectively, and a work difference of 23.5%. The improved biointegration could be contributed by the attenuated expression of fibronectin (p = 0.036), collagen 3A1 (p = 0.033), and α-smooth muscle actin (p = 0.045)─proteins typically upregulated during nonadherent fibrous capsule envelopment of bioinert material─adjacent to the optical cylinders. The coating also appeared to induce a less immunogenic milieu in the ocular surface tissue, evidenced by the markedly lower expression of tear proteins associated with immune and stimulus responses. Collectively, the level of these tear proteins in eyes with coated prostheses was 1.1 ± 13.0% of naïve eyes: substantially lower than with noncoated KPros (246.5 ± 79.3% of naïve, p = 0.038). Together, our results indicated that nHAp coating may reduce the risk of prosthesis failure in severely injured eyes, which are representative of the cohort of KPro patients.

Asunto(s)

RESUMEN

Efforts are ongoing to enhance the functionality of human acellular dermal matrices (hADMs), which are extensively utilized in reconstructive surgeries. Among these efforts, plasma treatments, particularly vacuum plasma treatments, have recently emerged in the medical field. This study aims to investigate the efficacy of a vacuum plasma treatment in enhancing the biocompatibility and biointegration of hADMs. Utilizing a plasma activator (ACTILINK reborn, Plasmapp Co., Ltd., Daejeon, Republic of Korea), hADMs were treated and evaluated through in vitro and in vivo analyses. Hydrophilicity changes were gauged by the blood absorption times, while SEM imaging was used to analyze physical surface deformation. Protein adsorption was measured with fluorescently labeled bovine serum albumin and fibronectin. For the in vivo study, mice were implanted with plasma-treated and untreated hADMs, and the post-implantation effects were analyzed through histological and immunofluorescence microscopy. The plasma-treated hADMs demonstrated a significantly enhanced hydrophilicity compared to the untreated samples. SEM imaging confirmed the maintenance of the microroughness after the treatment. The treated hADMs showed a significant reduction in fibronectin adsorption, a critical factor for cellular adhesion. In vivo, the plasma-treated hADMs exhibited reduced capsule formation and enhanced fibroblast infiltration, indicating improved biocompatibility and integration. These findings highlight the potential of a plasma treatment to enhance the performance of hADMs in clinical settings, offering a promising avenue for improving reconstructive surgery outcomes.

RESUMEN

Background Biointegration of polyurethane (PU) implants providing their stable position years after surgery ensures predictable results of breast augmentation and reconstruction almost eliminating implant factor as a cause of complications. However, in rare cases PU implants appear to be not connected to the surrounding tissues. The aim of the study was to determine the incidence of PU implant nonadherence after primary breast augmentations and augmentation mastopexies with dual plane implant position, to analyze possible causes, and to propose preventive measures and treatment possibilities of this complication. Methods The results of primary aesthetic surgeries in 333 patients with dual plane PU implant placement were analyzed. Patients were evaluated clinically, and pictures and videos taken in different periods after the surgery were compared. Particular attention was given to the changes in implant position and the appearance of asymmetries over time. Results PU implant nonadherence was found in seven patients. It can be divided into primary and secondary and may be complete or partial. Primary nonadherence was found in two cases (0.6%), and secondary in five (1.5%) cases. Possible influencing factors could have been traumatic surgical technique, seroma, hematoma, or physical trauma. The average follow-up was 33 months (1 month-15 years). Conclusion Biointegration is mandatory for the long-term predictable results with PU implants. PU implant nonadherence leads to implant malposition and may cause typical complications connected to non-PU implants. Improvements in surgical maneuvers, manufacturing process, and weight reduction of the implant may be beneficial for the stability of the results. Level of Evidence V.

RESUMEN

The degradation of cartilage, due to trauma, mechanical load or diseases, results in abundant loss of extracellular matrix (ECM) integrity and development of osteoarthritis (OA). Chondroitin sulfate (CS) is a member of the highly sulfated glycosaminoglycans (GAGs) and a primary component of cartilage tissue ECM. In this study, we aimed to investigate the effect of mechanical load on the chondrogenic differentiation of bone marrow mesenchymal stem cells (BM-MCSs) encapsulated into CS-tyramine-gelatin (CS-Tyr/Gel) hydrogel in order to evaluate the suitability of this composite for OA cartilage regeneration studies in vitro. The CS-Tyr/Gel/BM-MSCs composite showed excellent biointegration on cartilage explants. The applied mild mechanical load stimulated the chondrogenic differentiation of BM-MSCs in CS-Tyr/Gel hydrogel (immunohistochemical collagen II staining). However, the stronger mechanical load had a negative effect on the human OA cartilage explants evaluated by the higher release of ECM components, such as the cartilage oligomeric matrix protein (COMP) and GAGs, compared to the not-compressed explants. Finally, the application of the CS-Tyr/Gel/BM-MSCs composite on the top of the OA cartilage explants decreased the release of COMP and GAGs from the cartilage explants. Data suggest that the CS-Tyr/Gel/BM-MSCs composite can protect the OA cartilage explants from the damaging effects of external mechanical stimuli. Therefore, it can be used for investigation of OA cartilage regenerative potential and mechanisms under the mechanical load in vitro with further perspectives of therapeutic application in vivo.

Asunto(s)

RESUMEN

Fiber electronics, such as those produced by the electrospinning technique, have an extensive range of applications including electrode surfaces for batteries and sensors, energy storage, electromagnetic interference shielding, antistatic coatings, catalysts, drug delivery, tissue engineering, and smart textiles. New composite materials and blends from conductive-semiconductive polymers (C-SPs) offer high surface area-to-volume ratios with electrical tunability, making them suitable for use in fields including electronics, biofiltration, tissue engineering, biosensors, and "green polymers". These materials and structures show great potential for embedded-electronics tissue engineering, active drug delivery, and smart biosensing due to their electronic transport behavior and mechanical flexibility with effective biocompatibility. Doping, processing methods, and morphologies can significantly impact the properties and performance of C-SPs and their composites. This review provides an overview of the current literature on the processing of C-SPs as nanomaterials and nanofibrous structures, mainly emphasizing the electroactive properties that make these structures suitable for various applications.

RESUMEN

A hydrogel that fuses long-term biologic integration, multimodal responsiveness, and therapeutic functions has received increasing interest as a wearable and implantable sensor but still faces great challenges as an all-in-one sensor by itself. Multiple bonding with stimuli response in a biocompatible hydrogel lights up the field of soft hydrogel interfaces suitable for both wearable and implantable applications. Given that, we proposed a strategy of combining chemical cross-linking and stimuli-responsive physical interactions to construct a biocompatible multifunctional hydrogel. In this hydrogel system, ureidopyrimidinone/tyramine (Upy/Tyr) difunctionalization of gelatin provides abundant dynamic physical interactions and stable covalent cross-linking; meanwhile, Tyr-doped poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) acts as a conductive filler to establish electrical percolation networks through enzymatic chemical cross-linking. Thus, the hydrogel is characterized with improved conductivity, conformal biointegration features (i.e., high stretchability, rapid self-healing, and excellent tissue adhesion), and multistimuli-responsive conductivity (i.e., temperature and urea). On the basis of these excellent performances, the prepared multifunctional hydrogel enables multimodal wearable sensing integration that can simultaneously track both physicochemical and electrophysiological attributes (i.e., motion, temperature, and urea), providing a more comprehensive monitoring of human health than current wearable monitors. In addition, the electroactive hydrogel here can serve as a bidirectional neural interface for both neural recording and therapeutic electrostimulation, bringing more opportunities for nonsurgical diagnosis and treatment of diseases.

Asunto(s)

RESUMEN

Novel biomaterials for bio- and chemical sensing applications have gained considerable traction in the diagnostic community with rising trends of using biocompatible and lowly cytotoxic material. Hydrogel-based electrochemical sensors have become a promising candidate for their swellable, nano-/microporous, and aqueous 3D structures capable of immobilizing catalytic enzymes, electroactive species, whole cells, and complex tissue models, while maintaining tunable mechanical properties in wearable and implantable applications. With advances in highly controllable fabrication and processability of these novel biomaterials, the possibility of bio-nanocomposite hydrogel-based electrochemical sensing presents a paradigm shift in the development of biocompatible, "smart," and sensitive health monitoring point-of-care devices. Here, recent advances in electrochemical hydrogels for the detection of biomarkers in vitro, in situ, and in vivo are briefly reviewed to demonstrate their applicability in ideal conditions, in complex cellular environments, and in live animal models, respectively, to provide a comprehensive assessment of whether these biomaterials are ready for point-of-care translation and biointegration. Sensors based on conductive and nonconductive polymers are presented, with highlights of nano-/microstructured electrodes that provide enhanced sensitivity and selectivity in biocompatible matrices. An outlook on current challenges that shall be addressed for the realization of truly continuous real-time sensing platforms is also presented.

Asunto(s)

RESUMEN

Hydroxyapatite (HA) layers are appropriate biomaterials for use in the modification of the surface of implants produced inter alia from a Ti6Al4V alloy. The issue that must be solved is to provide implants with appropriate biointegration properties, enabling the permanent link between them and bone tissues, which is not so easy with the HA layer. Our proposition is the use of the intermediate layer ((IL) = TiO2, and titanate layers) to successfully link the HA coating to a metal substrate (Ti6Al4V). The morphology, structure, and chemical composition of Ti6Al4V/IL/HA systems were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectrometry (EDS). We evaluated the apatite-forming ability on the surface of the layer in simulated body fluid. We investigated the effects of the obtained systems on the viability and growth of human MG-63 osteoblast-like cells, mouse L929 fibroblasts, and adipose-derived human mesenchymal stem cells (ADSCs) in vitro, as well as on their osteogenic properties. Based on the obtained results, we can conclude that both investigated systems reflect the physiological environment of bone tissue and create a biocompatible surface supporting cell growth. However, the nanoporous TiO2 intermediate layer with osteogenesis-supportive activity seems most promising for the practical application of Ti6Al4V/TiO2/HA as a system of bone tissue regeneration.

RESUMEN

The concept of Instrumented Smart Implant emerged as a leading research topic that aims to revolutionize the field of orthopaedic implantology. These implants have been designed incorporating biophysical therapeutic actuation, bone-implant interface sensing, implant-clinician communication and self-powering ability. The ultimate goal is to implement revist interface, controlled by clinicians/surgeons without troubling the quotidian activities of patients. Developing such high-performance technologies is of utmost importance, as bone replacements are among the most performed surgeries worldwide and implant failure rates can still exceed 10%. In this review paper, an overview to the major breakthroughs carried out in the scope of multifunctional smart bone implants is provided. One can conclude that many challenges must be overcome to successfully develop them as revision-free implants, but their many strengths highlight a huge potential to effectively establish a new generation of high-sophisticated biodevices.

RESUMEN

Implantable medical devices have been developed to provide multifunctional ability to numerous bioapplications. In the scope of orthopaedics, four methodologies were already proposed to design implant technologies: non-instrumented passive implants, non-instrumented active implants, instrumented passive implants and instrumented active implants. Even though bone replacements are among the most performed surgeries worldwide, implant failure rates can still exceed 10%. Controversial positions multiply in the scientific community about the potential of each methodology to minimize the burden related to implant failures. In this perspective paper, we argue that the next technological revolution in the field of implantable bone devices will most likely emerge with instrumented active implants as multifunctional smart devices extracorporeally controlled by clinicians/surgeons. Moreover, we provide a new perspective about implant technology: the essence of instrumented implants is to enclose a hybrid architecture in which optimal implant performances require both smart instrumentation and smart coatings, although the implant controllability must be ensured by extracorporeal systems.

RESUMEN

BACKGROUND: A bio-integrative fiber-reinforced implant (OSSIOfiber® Hammertoe Fixation Implant, OSSIO Ltd., Caesarea, Israel) for proximal interphalangeal joint (PIPJ) correction-arthrodesis showed partial bio-integration at 1-year follow-up (1FU) in a previous study. The study was prolonged to assess the bio-integration at 2-year-follow-up (2FU). METHODS: Twenty-four patients with proximal interphalangeal joint (PIPJ) correction-arthrodesis using the fiber-reinforced implant and analysed at 1FU, completed 2FU. Follow-up included clinical examination, patient reported outcomes, radiographs, MRI and bio-integration scoring. Results were compared between the 1FU and 2FU (paired t-test). RESULTS: Radiographs confirmed fusion in 96 % (n = 23) at 2FU (1FU, 92 % (n = 22)). Implant was no longer visible in 21 % (n = 5), partially visible in 33 % (n = 8), and fully visible in 46 % (n = 11)(1FU, fully visible 100 % (n = 24)). The border between implant and surrounding bone was scored not visible in 88 % (n = 21) and partially visible in 12 % (n = 3) (1FU, border partially visible 100 % (n = 24)). There were no cyst formation or fluid accumulation findings 1FU/2FU. Mild bone edema was detected in 4 % (n = 1) (1FU, 29 % (n = 7)). None of the edema findings were considered as adverse implant related. The mean bio-integration score was 9.71 ± 0.69 at 2FU (1FU, 7.71 ± 0.46). The parameters of border between implant and bone and bone edema further improved at the 2FU compared to the 1FU, total bio-integration score was also higher at 2FU than 1FU (each p < 0.05). CONCLUSIONS: This study demonstrates 96 % PIPJ fusion rate and increased bio-integration from 1FU to 2FU, reaching advanced bio-integration of the fiber-reinforced implant at 2FU.

Asunto(s)

RESUMEN

Recent advances in biomaterials offer new possibilities for brain tissue reconstruction. Biocompatibility, provision of cell adhesion motives and mechanical properties are among the present main design criteria. We here propose a radically new and potentially major element determining biointegration of porous biomaterials: the favorable effect of interstitial fluid pressure (IFP). The force applied by the lymphatic system through the interstitial fluid pressure on biomaterial integration has mostly been neglected so far. We hypothesize it has the potential to force 3D biointegration of porous biomaterials. In this study, we develop a capillary hydrostatic device to apply controlled in vitro interstitial fluid pressure and study its effect during 3D tissue culture. We find that the IFP is a key player in porous biomaterial tissue integration, at physiological IFP levels, surpassing the known effect of cell adhesion motives. Spontaneous electrical activity indicates that the culture conditions are not harmful for the cells. Our work identifies interstitial fluid pressure at physiological negative values as a potential main driver for tissue integration into porous biomaterials. We anticipate that controlling the IFP level could narrow the gap between in vivo and in vitro and therefore decrease the need for animal screening in biomaterial design.

RESUMEN

Killing bacteria, eliminating biofilm and building soft tissue integration are very important for percutaneous implants which service in a complicated environment. In order to endow Ti implants with above abilities, multifunctional coatings consisted of Fe2O3-FeOOH nanograins as an outer layer and Zn doped microporous TiO2 as an inner layer were fabricated by micro-arc oxidation, hydrothermal treatment and annealing treatment. The microstructures, physicochemical properties and photothermal response of the coatings were observed; their antibacterial efficiencies and cell response in vitro as well as biofilm elimination and soft tissue integration in vivo were evaluated. The results show that with the increased annealing temperature, coating morphologies didn't change obviously, but lattices of ß-FeOOH gradually disorganized into amorphous state and rearranged to form Fe2O3. The coating annealed at 450 °C (MA450) had nanocrystallized Fe2O3 and ß-FeOOH. With a proper NIR irradiation strategy, MA450 killed adhered bacteria efficiently and increased fibroblast behaviors via up-regulating fibrogenic-related genes in vitro; in an infected model, MA450 eliminated biofilm, reduced inflammatory response and improved biointegration with soft tissue. The good performance of MA450 was due to a synergic effect of photothermal response and released ions (Zn2+ and Fe3+).

RESUMEN

BACKGROUND: A new bio-integrative fiber-reinforced implant (OSSIOfiber® Hammertoe Fixation Implant, OSSIO Ltd., Caesarea, Israel) was developed for proximal interphalangeal joint (PIPJ) correction-arthrodesis. The main purpose of this clinical study was to assess implant bio-integration at 1-year follow-up. METHODS: Twenty-four patients, previously treated for a Hammertoe deformity using the bio-integrative, fiber-reinforced implant, were enrolled in this follow-up study. One-year follow-up included clinical examination, patient reported outcomes, radiographs, Magnetic Resonance Imaging (MRI) and bio-integration scoring. RESULTS: Proximal interphalangeal joint (PIPJ) radiographic fusion rate was 92% (n = 22). MRI was analyzed for 24 (100%) patients. In 100% of patients (n = 24), the border between implant and surrounding tissue was scored as partially visible. There were no cyst formation or fluid accumulation findings. Mild bone edema was detected in 29% (n = 7) and is attributed to the chronic distribution of forces due to chronic abnormal gait and pasture. None of the edema findings were considered as adverse implant-related finding. The mean bio-integration score was 7.71 ± 0.46. CONCLUSIONS: This study demonstrates safe bio-integration of the newly developed fiber-reinforced implant at 1-year follow-up without negative side effects.

Asunto(s)

RESUMEN

Corneal diseases are a leading cause of blindness with an estimated 10 million patients diagnosed with bilateral corneal blindness worldwide. Corneal transplantation is highly successful in low-risk patients with corneal blindness but often fails those with high-risk indications such as recurrent or chronic inflammatory disorders, history of glaucoma and herpetic infections, and those with neovascularisation of the host bed. Moreover, the need for donor corneas greatly exceeds the supply, especially in disadvantaged countries. Therefore, artificial and bio-mimetic corneas have been investigated for patients with indications that result in keratoplasty failure. Two long-lasting keratoprostheses with different indications, the Boston type-1 keratoprostheses and osteo-odonto-keratoprostheses have been adapted to minimise complications that have arisen over time. However, both utilise either autologous tissue or an allograft cornea to increase biointegration. To step away from the need for donor material, synthetic keratoprostheses with soft skirts have been introduced to increase biointegration between the device and native tissue. The AlphaCor™, a synthetic polymer (PHEMA) hydrogel, addressed certain complications of the previous versions of keratoprostheses but resulted in stromal melting and optic deposition. Efforts are being made towards creating synthetic keratoprostheses that emulate native corneas by the inclusion of biomolecules that support enhanced biointegration of the implant while reducing stromal melting and optic deposition. The field continues to shift towards more advanced bioengineering approaches to form replacement corneas. Certain biomolecules such as collagen are being investigated to create corneal substitutes, which can be used as the basis for bio-inks in 3D corneal bioprinting. Alternatively, decellularised corneas from mammalian sources have shown potential in replicating both the corneal composition and fibril architecture. This review will discuss the limitations of keratoplasty, milestones in the history of artificial corneal development, advancements in current artificial corneas, and future possibilities in this field.

RESUMEN

The word "biocompatibility," is inconsistent with the observations of healing for so-called biocompatible biomaterials. The vast majority of the millions of medical implants in humans today, presumably "biocompatible," are walled off by a dense, avascular, crosslinked collagen capsule, hardly suggestive of life or compatibility. In contrast, one is now seeing examples of implant biomaterials that lead to a vascularized reconstruction of localized tissue, a biological reaction different from traditional biocompatible materials that generate a foreign body capsule. Both the encapsulated biomaterials and the reconstructive biomaterials qualify as "biocompatible" by present day measurements of biocompatibility. Yet, this new generation of materials would seem to heal "compatibly" with the living organism, where older biomaterials are isolated from the living organism by the dense capsule. This review/perspective article will explore this biocompatibility etymological conundrum by reviewing the history of the concepts around biocompatibility, today's standard methods for assessing biocompatibility, a contemporary view of the foreign body reaction and finally, a compendium of new biomaterials that heal without the foreign body capsule. A new definition of biocompatibility is offered here to address advances in biomaterials design leading to biomaterials that heal into the body in a facile manner.

Asunto(s)