RESUMEN

Cinchonine is a quinoline alkaloid known for its antimalarial properties. Due to the advantages of using compounds of metal ions with alkaloids, a copper(II) compound with cinchonine was synthesized, and, for comparative purposes, a cadmium(II) compound with cinchonine. During the synthesis, the emerging interactions between the metal ion and cinchonine were studied. After crystallization, it was examined how the obtained compounds would interact with the model blood component, hematoporphyrin IX. Ultraviolet-visible (UV-Vis) spectroscopy, Raman spectroscopy, and attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) were used in the study. In the case of monitoring the synthesis, the best method turned out to be UV-Vis spectroscopy, combined with the possibility of two-dimensional correlation spectroscopy (2D-COS), which enabled the identification of peaks characteristic of the interactions of the cinchonine quinoline ring with metal ions. In turn, the obtained Raman spectra showed shifts of individual bands and changes in their intensity, and 2D-COS showed the sequence of formation of individual interactions, which confirmed the formation of cinchonine compounds with metals. ATR FT-IR also allowed us to compare the spectra of the substrates used in the synthesis with the crystallized compounds and thus confirm the formation of the expected compounds. Bands characteristic of π-π-stacking interactions between the quinoline ring and the tetrapyrrole ring of hematoporphyrin IX were also observed. Observed interaction with a model blood component may be important when designing drugs for antimalarial therapy.

RESUMEN

We present an attenuated total reflection (ATR) correction scheme capable of rectifying ATR spectra while considering the polarization state for arbitrary angles of incidence, provided that this angle exceeds the critical angle for the entire ATR spectrum. Due to its reliance on the weak absorption approximation, it cannot achieve perfect correction of the ATR spectra. However, comprehending its functionality may offer valuable insights into the concept behind the weak absorption approximation. Depending on the specific polarization state of an instrument accessory combination, this correction scheme may outperform the proprietary advanced ATR correction authored by ThermoFisher while being as user-friendly, but in contrast to the latter completely transparent with regard to its functionality.

RESUMEN

Molecular interactions between active pharmaceutical ingredients (APIs) and xanthine (XAT) derivatives were analyzed using singular value decomposition (SVD). XAT derivatives were mixed with equimolar amounts of ibuprofen (IBP) and diclofenac (DCF), and their dissolution behaviors were measured using high-performance liquid chromatography. The solubility of IBP decreased in mixtures with caffeine (CFN) and theophylline (TPH), whereas that of DCF increased in mixtures with CFN and TPH. No significant differences were observed between the mixtures of theobromine (TBR) or XAT with IBP and DCF. Mixtures with various molar ratios were analyzed using differential scanning calorimetry, X-ray powder diffraction, and Fourier-transform infrared spectroscopy to further explore these interactions. The results were subjected to SVD. This analysis provides valuable insights into the differences in interaction strength and predicted interaction sites between XAT derivatives and APIs based on the combinations that form mixtures. The results also showed the impact of the XAT derivatives on the dissolution behavior of IBP and DCF. Although IBP and DCF were found to form intermolecular interactions with CFN and TPH, these effects resulted in a reduction of the solubility of IBP and an increase in the solubility of DCF. The current approach has the potential to predict various interactions that may occur in different combinations, thereby contributing to a better understanding of the impact of health supplements on pharmaceuticals.

Asunto(s)

RESUMEN

This study first developed non-destructive and accurate methods to predict the relative contents of mixed mineral pigments in ancient Chinese wall paintings using multiple spectroscopic techniques. The colorimetry, attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR), ultraviolet-visible-near-infrared (UV-Vis-NIR) spectroscopy, and Raman spectroscopy were employed. Analyses were conducted including color difference, spectral reflection, ATR FT-IR spectra, and Raman mapping for simulated samples (malachite-lazurite mixed with rabbit glue samples) before and after aging. Models were then established for predicting the relative pigment contents of samples using UV-Vis-NIR and ATR FT-IR spectral data with Beer-Lambert law, and mathematical methods comprising principal component analysis (PCA) and nonlinear curve fitting. In particular, PCA and empty modeling methods combined with non-negative partial least squares were developed to predict the relative pigment contents based on Raman mapping data. The results demonstrated that approaches comprising PCA, mathematical model, and empty modeling based on the spectral data were effective at predicting the relative pigment contents. The predicted results obtained using the mathematical model based on UV-Vis-NIR spectra had an error of about 2%, and the best prediction based on ATR FT-IR spectra had an error of <3.6% at 1041 cm-1. The errors for the predictions using PCA and empty modeling based on Raman mapping data were 0.01-9.30% and 0.28-7.15%, respectively. However, the predicted relative pigment contents obtained based on ATR FT-IR data combined with the Beer-Lambert law had higher errors. The findings of this study confirm the strong feasibility of using spectroscopic techniques for quantitatively analyzing mixed mineral pigments.

RESUMEN

Oxidized organosulfur compounds and, in particular, sulfoxides are of interest as solvents in the semiconductor and pharmaceutical industry, environmental contaminants, and simulants in deactivation of chemical warfare agents. An experimental study is reported of the interaction of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (Compound 2) with diethyl sulfoxide (DESO) in pure form and in aqueous solution. First, the suitability of Compound 2 as sorbent in aqueous solution was assessed; namely, its long-term stability (up to 15 days) in liquid water has been investigated at room temperature and under stirring. Here, a novel facile spectroscopic method has been used, a periodic micro-sampling of sorbent from suspension, followed by vacuum mini-filtration and an ex situ time-dependent attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis. Next, the interaction of Compound 2 with pure liquid DESO under ambient conditions was investigated, which yields the stoichiometric adsorption complex (Al-MOF-TCPPH2)1(DESO)2 denoted Compound 3. In this adsorption complex, molecules of DESO interact with the OH group and carboxylate group of the sorbent. Then, the removal of DESO from Compound 3 was assessed, using facile treatment with warm water in the micro Soxhlet apparatus followed by the ATR FT-IR analysis. Finally, Compound 2 was tested in sorption of DESO from diluted aqueous solution. In the initial step, the sorption proceeds very quickly (in <1 min the concentration of DESO decreases by about 20%) followed by a much slower step. The maximum amount of adsorbed DESO corresponds to half of the amount adsorbed from pure DESO as found by the high-performance liquid chromatography-ultraviolet detection method. This adsorbed amount corresponds to 1 mol DESO adsorbate per mol of sorbent. Porphyrin aluminum metal-organic framework Compound 2 is promising for the removal of DESO from diluted aqueous solution, and it is of interest for the removal of similar oxidized organosulfur compounds.

RESUMEN

Information on boll distribution within a cotton plant is critical to evaluate the adaptation and response of cotton plants to environmental and biotic stress in cotton production. Cotton researchers have applied available conventional fiber measurements, such as the high volume instrument (HVI) and advanced fiber information system (AFIS), to map the location and the timing of boll development and distribution within plants and further to determine within-plant variability of cotton fiber properties. Both HVI and AFIS require numerous cotton bolls combined for the measurement. As an alternative approach, attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy was proposed to measure fiber maturity (MIR) and crystallinity (CIIR) of a sample as little as 0.5 mg lint. Extending fiber maturity and crystallinity measurement into a single boll for node-by-node mapping, FT-IR method might be advantageous due to less sampling amount compared with HVI and AFIS methods. Results showed that FT-IR technique enabled the evaluation of fiber MIR and CIIR at a boll level, which resulted in average MIR and CIIR values highly correlated with HVI micronaire (MIC) and AFIS maturity ratio (M). Hence, FT-IR technique possesses a good potential for a rapid and non-destructive node-by-node mapping of cotton boll maturity and crystallinity distribution.

Asunto(s)

RESUMEN

Despite the inherent stability of dried and cured products, such as pastourma, appropriate refrigeration remains essential for preserving their optimal characteristics. This study explored quality and safety characteristics in lamb, beef, and buffalo pastourma during 16-day refrigeration storage after package opening. The comprehensive approach employed Attenuated Total Reflection-Fourier-Transform Infrared (ATR-FTIR) spectroscopy, colorimetry, and image analysis, alongside physicochemical and microbiological analyses, to shed light on these alterations. The findings reveal a reduction in textural uniformity and color vibrancy (fading reds and yellows) across all samples during storage, with lamb pastourma exhibiting the most pronounced effects. Notably, image analysis emerged as a powerful tool, enabling the accurate classification of samples based on storage duration. Additionally, significant variations were observed in moisture content, hue angle, firmness, and TBARS levels, highlighting their influence on pastourma quality. The study documented a gradual decrease in lactic acid bacteria and aerobic plate count populations over time. ATR-FTIR spectra's interpretation revealed the presence of lipids, proteins, carbohydrates, and water. Protein secondary structures, demonstrably influenced by the meat type used, exhibited significant changes during storage, potentially impacting the functional and textural properties of pastourma. Overall, the findings contribute to a deeper understanding of pastourma spoilage during storage, paving the way for the development of improved preservation and storage strategies.

RESUMEN

There is a growing interest in the use of silicone composite insulators for electrical power transmission and distribution applications. However, such materials are susceptible to degradation as they are exposed to electrical and environmental stresses during operating conditions. Therefore, it is crucial to gain a thorough understanding of the degradation mechanism through changes in the material structure that may provide insight into potential failures in the electrical grid. Attenuated total reflection Fourier transform infrared spectroscopy and two-dimensional correlation spectroscopy (2D-COS) were used along with contact angle measurements to characterize changes in silicone rubber samples from actual insulators subjected to tracking wheel testing. The results showed a decrease in absorbance of different infrared bands representing different functional groups, such as Si-O-Si, methyl functional groups, and both Al-O and hydroxyl groups of alumina trihydrate as a function of the number of tracking cycles. The sequence of changes in the functional groups was determined by 2D-COS as Al-O and OH followed by Si-O-Si polymer backbone modes, followed by polymer methyl side chains. An enhancement in the average contact angle with the number of tracking cycles revealed a concomitant increase in surface roughness with electrical tracking.

RESUMEN

Sevoflurane, also called fluoromethyl ether, is an inhalation anesthetic agent used to initiate and maintain general anesthesia for adults and pediatric patients during surgical procedures. Several analytical methods have previously been applied to follow the properties and quality of sevoflurane, including mass spectrometry and gas chromatography methods. These methods are practically tedious and need sophisticated apparatus. In the present work, an attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometric method was used for the quantitative determination of sevoflurane which is characterized as a fast, accurate, and available technique for most pharmaceutical laboratories, besides the gas chromatographic method which is the most suitable for the detection of impurities. Sevoflurane is a liquid and it is applied directly on the glass top of the ATR-FTIR either as a concentrated solution or diluted with hexane as a diluent, which did not interfere with sample determination within the specified wavelength range of the IR spectrum, particularly the wavelength of the ethereal group at 1200 cm-1. This method can be applied to the identification test and quantitative assay of sevoflurane since it is validated for the precision, accuracy, reproducibility, and specificity in the analysis of sevoflurane as a pharmaceutical product. However, still, there is a need for a gas chromatographic method to detect the impurities and degradation products during the stability study of sevoflurane.

RESUMEN

In this study there were utilized a combination of Fourier transform infrared spectroscopy in attenuated total reflection mode (ATR-FTIR) and partial least squares (PLS) regression method to develop quantitative models for determining the concentration of ademetionine in commercial tablets. The established and validated models were specifically designed for a commercial product containing ademetionine 1,4-butandiesulfonate. The coefficient of determination for the developed model was 0.999. Relative standard deviation (RSD) does not exceed 1.6% for repeatability and intermediate accuracy, which meets the international ICH and AOAC requirements for the method performance. The validation results effectively confirmed that this method is suitable and meets the current requirements for analytical methods in drug quality control. Consequently, this approach can be used for routine ademetionine analysis in pharmaceutical products and has the potential to be applied to other active pharmaceutical ingredients (APIs) in drug quality control.

Asunto(s)

RESUMEN

The cell wall integrity (CWI) signaling pathway regulates yeast cell wall biosynthesis, cell division, and responses to external stress. The cell wall, comprised of a dense network of chitin, ß-1,3- and ß-1,6- glucans, and mannoproteins, is very thin, <100 nm. Alterations in cell wall composition may activate the CWI pathway. Saccharomyces cerevisiae, a model yeast, was used to study the role of individual wall components in altering the structure and biophysical properties of the yeast cell wall. Near-field Fourier transform infrared spectroscopy (nano-FT-IR) was used for the first direct, spectrochemical identification of cell wall composition in a background (wild-type) strain and two deletion mutants from the yeast knock-out collection: kre6Δ and knr4Δ. Killer toxin resistant 6 (Kre6) is an integral membrane protein required for biosynthesis of ß-1,6-glucan, while Knr4 is a cell signaling protein involved in the control of cell wall biosynthesis, in particular, biosynthesis and deposition of chitin. Complementary spectral data were obtained with far-field (FF)-FT-IR, in transmission, and with attenuated total reflectance (ATR) spectromicroscopy with 3-10 µm wavelength-dependent spatial resolution. The FF-FT-IR spectra of cells and spectra of isolated cell wall components showed that components of the cell body dominated transmission spectra and were still evident in ATR spectra. In contrast, the nano-FT-IR at ∼25 nm spatial resolution could be used to characterize the yeast wall chemical structure. Our results show that the ß-1,6-glucan content is decreased in kre6Δ, while all glucan content is decreased in the knr4Δ cell wall. The latter may be thinner than in wild type, since not only are mannan and chitin detectable by nano-FT-IR, but also lipid membranes and protein, indicative of cell interior.

Asunto(s)

RESUMEN

The most common mid-infrared (MIR) attenuated total reflection (ATR) accessory has a nominal angle of incidence of 45° and does not have a polarizer. A spectrum recorded with such an accessory does not hold enough information for the sophisticated ATR correction of MIR spectra with strong peaks, which are often strongly affected by refractive index changes due to anomalous dispersion. Here we show that a 45° ATR spectrum recorded without a polarizer and the polarization angle for the same ATR Fourier transform infrared spectroscopy system provide enough information to determine the ATR s-polarized spectrum. Further analysis with an improved non-iterative Kramers-Kronig analysis immediately yields the complex refractive index function. The analysis is about two orders of magnitude faster than iterative formalism and runs within seconds on a typical office PC. The effectiveness of our advanced ATR correction formalism is showcased through its application to water, employing diamond, ZnSe, and Ge ATR crystals, along with two distinct ATR accessories. Additionally, the formalism is applied to octadecane spectra. Potential sources of errors such as incidence angle spread, dispersion of the polarization angle, and the influence of reflection at the air/ATR crystal interface are investigated by simulations.

RESUMEN

Lactose is typically produced via cooling crystallization either from whey or whey permeate (edible grade) or from aqueous solution (pharmaceutical grade). While in solution, lactose is present in 2 anomeric forms, α- and ß-lactose. During cooling crystallization under standard process conditions, only α-lactose crystallizes, depleting the solution of α-anomer. In practice, mutarotation kinetics are often assumed to be much faster than crystallization. However, some literature reports limitation of crystallization by mutarotation. In the present research, we investigate the influence of operating conditions on mutarotation in lactose crystallization and explore the existence of an operation regimen where mutarotation can be disregarded in the crystallization process. Therefore, we study crystallization from aqueous lactose solutions by inline monitoring of concentrations of α- and ß-lactose via attenuated total reflection Fourier-transform spectroscopy. By implementing a linear cooling profile of 9 K/h to a minimum temperature of 10°C, we measured a remarkable increase in ß/α ratio, reaching a maximum of 2.19. This ratio exceeds the equilibrium level by 36%. However, when the same cooling profile was applied to a minimum temperature of 25°C, the deviation was significantly lower, with a maximum ß/α ratio of 1.72, representing only an 8% deviation from equilibrium. We also performed a theoretical assessment of the influence of process parameters on crystallization kinetics. We conclude that mutarotation needs to be taken into consideration for efficient crystallization control if the crystal surface area and supersaturation are sufficiently high.

Asunto(s)

RESUMEN

Maturity is a major fiber trait that affects the processing and performance of cotton fiber. Rapid and accurate identification of fiber maturity phenotypes and genotypes is of importance to breeders. Previous studies showed that either conventional fiber measurements or attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis discriminated the immature fiber (im) phenotype from the wild type (WT) mature fiber phenotype in a segregating F2 population from a cross between two upland cotton lines differing in fiber maturity. However, both conventional fiber property measurement methods and FT-IR analyses with current algorithms could not detect the subtle differences among the WT fibers composed of two different genotypes, WT homozygosity (WT-homo) and WT heterozygosity (WT-hetero). This research explored the FT-IR method, in combination with soft independent modeling of class analogy of principal component analysis (SIMCA-PCA), for the discrimination of WT fiber phenotypes consisting of two different genotypes (WT-homo and WT-hetero). The new approach enabled the detection of IR spectral intensity differences between WT-homo and WT-hetero fibers. Successful classification originated from a distinctive spectral difference in the low-wavenumber region (<700 cm-1) between WT-hetero fibers and WT-homo fibers. This observation emphasized that ATR FT-IR with a SIMCA-PCA approach would be a sensitive tool for classifying the WT fibers demonstrating minor phenotypic differences. The improved sensitivity of the infrared method may provide a way of dissecting genotype-phenotype interactions of cotton fibers rapidly and efficiently.

Asunto(s)

RESUMEN

Much research has focused on attempting to understand the drivers of bone diagenesis. However, this sensitive process is easily influenced by various factors, particularly the condition of the remains (i.e., whether they have been subjected to trauma). Previous research demonstrates that trauma can influence soft tissue decomposition, yet to date, no studies have looked at how bone fractures could affect bone diagenesis. To address this gap, two short timescale studies were conducted to investigate the influence of bone fractures on the physicochemical composition of disarticulated, partially fleshed animal remains. Disarticulated porcine bones were either fractured using blunt force or sharp force whilst fresh (producing perimortem damage), at 60 days producing postmortem damage (postmortem interval (PMI)), or left intact and left outside for up to 180 days post-fracture/240 days PMI. Retrieved bone sections were then analyzed for physicochemical differences using non-destructive methods, i.e., scanning electron microscopy energy dispersive spectroscopy and Fourier transform infrared spectroscopy with attenuated total reflectance. It was hypothesized that differences would be found in the physicochemical composition between the bones with fractures and those without after undergoing diagenetic change. The bone fractures significantly affected the elemental composition of bone over time, but structural composition initially remained stable. It was also possible to distinguish between perimortem and postmortem fractures using these two analytical techniques due to physicochemical differences. This research shows bone fractures can significantly alter the physicochemical composition of the bone during the postmortem period and have the potential to facilitate more accurate PMI estimations in forensic contexts.

Asunto(s)

RESUMEN

Cobalt(II) thiocyanate-based tests are routinely used to screen cocaine products, with the formation of a blue species interpreted as a positive response. An array of other organic bases has been identified as false positives - including well-documented cocaine product adulterant lidocaine and its salt. False positives prompt continued test development, though improvements are hindered by unresolved product structures and reaction pathways. Toward greater clarity, cobalt(II) thiocyanate reactions with cocaine hydrochloride, along with lidocaine and its salt, were investigated using multiple analytical techniques. Reactions involving cocaine hydrochloride yielded glassy, amorphous blue material while reactions of lidocaine hydrochloride monohydrate produced larger, needle-like crystals whose structure was determined via single-crystal X-ray diffraction to be an ion pair (Hlidocaine+ )2 ([Co(SCN)4 ]2- )·H2 O. While the blue precipitate isolated from reactions involving cocaine hydrochloride was unsuitable for crystallographic structure determination, comparative ultraviolet-visible, attenuated total reflectance infrared, and Raman spectroscopic analysis - along with elemental analysis - supports that this solid is comprised of a comparable ion pair (Hcocaine+ )2 [Co(SCN)4 ]2- . Pink crystals isolated from lidocaine reaction vessels were identified as coordination compounds cis-[CoL2 (SCN)2 ] and trans-[CoL2 (SCN)2 ] where L = lidocaine, while pink crystals from both cocaine hydrochloride and lidocaine hydrochloride monohydrate reaction vessels were the coordination polymer trans-[Co(H2 O)2 (SCN)2 ]·H2 O. The results presented herein enable reaction optimization to favor a desired product, whether ion pair or coordination species.

RESUMEN

Injection-molded polyoxymethylene (POM) has molecular chains mainly oriented in the injection direction. We investigated the directional dependence of the polarized infrared reflection and attenuated total reflection spectra by rotating the anisotropic POM sample. Because of the strong absorption and large frequency dispersion of the C-O vibration in the main-chain direction, we found phenomena such as shoulder wing generation that resulted from the mixing of optical responses attributed to the vibration in the main chain and that in the direction perpendicular to the main chain. The spectra of the directional dependence can be explained qualitatively because of the anisotropy of the mode with large frequency dispersion.

RESUMEN

Attenuated total reflection infrared (ATR-IR, 4000-400 cm-1), ATR-far-IR (ATR-FIR, 400-50 cm-1), and Raman spectra (4000-10 cm-1) were measured for calcium carbonate, three kinds of minerals (calcite, aragonite, and quartz), two kinds of rocks (obsidian and pumice), and four kinds of biogenic minerals, i.e., coral (aragonite), Ruditapes philippinarum (aragonite), Meretrix lusoria (aragonite), and Corbicula japonica (aragonite), to investigate the polymorphism of minerals and biogenic minerals, differences in the crystal structure among aragonite and aragonite biogenic minerals, water in the minerals and biogenic minerals, Boson peaks of obsidian and pumice, very small amounts of carotenoids in the three kinds of shells, and so on. In this study, we put some emphasis on the low-frequency region of IR (FIR) and Raman spectra. ATR-FIR spectra were measured down to 50 cm-1 and Raman spectra were obtained down to 10 cm-1. Second derivative spectra were calculated for the FIR spectra. It has been found from the present study that the FIR spectra are the most powerful for exploring polymorphism and differences in the crystal structure among aragonite and aragonite biogenic minerals. A Boson peak, which is a characteristic low-frequency Raman band for amorphous materials, was observed at around 40 cm-1 in the Raman spectra of obsidian and pumice. The Boson peak of pumice is located at a lower frequency by 12 cm-1 than that of obsidian, indicating that the mean atomic volume of pumice is larger than that of obsidian. The present study has revealed that IR spectra are useful to investigate the amounts and structure of fluid and bound water. Moreover, it has also been found that Raman spectra can detect a very tiny amount of carotenoids in the shells due to the resonance Raman effect.

RESUMEN

The wax appearance temperature (WAT), being one of the key characteristics of waxy crude oil and other waxy substances, is used for the necessary assessment of the phase stability of materials during various technological processes. However, the determination of this parameter as well as peculiarities of wax formation under high gas pressure suffers from the lack of suitable techniques for this task. To address this issue, an attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) method has been applied for the first time to measure the WAT of waxy crude oil under high gas pressure. Carbon dioxide (CO2), nitrogen, and natural gas were used in the study due to their widespread applicability as injection gases in enhanced oil recovery methods. The S2/S1 versus temperature method based on changes in the band of rocking vibrations of the CH2 group was applied to determine WAT. It was found that the ATR FT-IR method based on the proposed dependence S2/S1 versus temperature gives lower WAT values compared to those observed by viscometry, magnetic resonance imaging inspection, and cross-polarized microscopy methods for the waxy crude oil studied. A detailed analysis was carried out using variable-temperature ATR FT-IR spectra of waxy crude oil in the temperature region near the WAT. Essentially different dynamics of wax crystal formation in waxy oil sample and model paraffin solution were demonstrated during the cooling process. The results obtained by high-pressure ATR FT-IR showed that CO2 and natural gas reduce the WAT, while nitrogen has virtually no effect. In addition, for the studied oil, it was found that high pressure of CO2 and natural gases leads to a visual decrease in the amount of wax crystals precipitated, but not to the complete disappearance of microcrystals at a certain temperature and pressure. The results obtained proved that ATR FT-IR can be an effective method for proper determinations of WAT under high-pressure conditions similar to those met in practice.

RESUMEN

The pKa values of propanolamine hydrochloride (PAMH) and poly(allylamine hydrochloride) (PAAMH) in concentrated solutions were determined by both Fourier transform infrared spectroscopy (FT-IR) titration and classical potentiometric (POT) titration and compared. Starting with the respective fully protonated forms PAMH and PAAMH and increasing the pH value by sodium hydroxide addition in situ attenuated total reflection FT-IR (ATR FT-IR) spectra on PAMH and PAAMH solutions show the variation of diagnostic infrared (IR) bands. From the decrease of the most intense δ(NH3+) band the dissociation process of the NH3+ groups could be followed. Thereby, from the respective normalized band area A the dissociation degree αIR of the ammonium groups could be determined. Plotting pH versus αIR and fitting this curve by a modified Henderson-Hasselbalch function pH = pKa + B log (αIR/1 - αIR) the parameters pKa and cooperativity factor B were obtained. pKa values from FT-IR titration were qualitatively in line with respective pKa values from POT titration. Quantitative systematic pKa deviations between polyelectrolyte (PEL) and respective monoelectrolyte and the tentative effects of PEL molecular weight, ambient ionic strength, and titration concept (FT-IR and POT) are discussed based on classical models of weak PEL.