RESUMEN

This paper proposes a fast direction of arrival (DOA) estimation method based on positive incremental modified Cholesky decomposition atomic norm minimization (PI-CANM) for augmented coprime array sensors. The approach incorporates coprime sampling on the augmented array to generate a non-uniform, discontinuous virtual array. It then utilizes interpolation to convert this into a uniform, continuous virtual array. Based on this, the problem of DOA estimation is equivalently formulated as a gridless optimization problem, which is solved via atomic norm minimization to reconstruct a Hermitian Toeplitz covariance matrix. Furthermore, by positive incremental modified Cholesky decomposition, the covariance matrix is transformed from positive semi-definite to positive definite, which simplifies the constraint of optimization problem and reduces the complexity of the solution. Finally, the Multiple Signal Classification method is utilized to carry out statistical signal processing on the reconstructed covariance matrix, yielding initial DOA angle estimates. Experimental outcomes highlight that the PI-CANM algorithm surpasses other algorithms in estimation accuracy, demonstrating stability in difficult circumstances such as low signal-to-noise ratios and limited snapshots. Additionally, it boasts an impressive computational speed. This method enhances both the accuracy and computational efficiency of DOA estimation, showing potential for broad applicability.

RESUMEN

To address the weakness that the difference co-array (DCA) only enhances the degrees of freedom (DOFs) to a limited extent, a new configuration called the generalized nested array via difference-sum co-array (GNA-DSCA) is proposed for direction of arrival (DOA) estimation. We consider both the temporal and spatial information of the array output to construct the DSCA model, based on which the DCA and sum co-array (SCA) of the GNA are systematically analyzed. The closed-form expression of the DOFs for the GNA-DSCA is derived under the determined dilation factors. The optimal results show that the GNA-DSCA has a more flexible configuration and more DOFs than the GNA-DCA. Moreover, the larger dilation factors yield significantly wider virtual aperture, which indicates that it is more attractive than the reported DSCA-based sparse arrays. Finally, a hole-filling strategy based on atomic norm minimization (ANM) is utilized to overcome the degradation of the estimation performance due to the non-uniform virtual array, thus achieving accurate DOA estimation. The simulation results verify the superiority of the proposed configuration in terms of virtual array properties and estimation performance.

Asunto(s)

RESUMEN

This letter studies a topology identification problem for an electric distribution grid using sign patterns of the inverse covariance matrix of bus voltage magnitudes and angles, while accounting for hidden buses. Assuming the grid topology is sparse and the number of hidden buses are fewer than those of the observed buses, we express the observed voltages inverse covariance matrix as the sum of three structured matrices: sparse matrix, low-rank matrix with sparse factors, and low-rank matrix. Using the sign patterns of the first two of these matrices, we develop an algorithm to identify the topology of a distribution grid with a minimum cycle length greater than three. To estimate the structured matrices from the empirical inverse covariance matrix, we formulate a novel convex optimization problem with appropriate sparsity and structured norm constraints and solve it using an alternating minimization method. We validate the proposed algorithm's performance on a modified IEEE 33 bus system.

RESUMEN

In underwater acoustic signal processing, direction of arrival (DOA) estimation can provide important information for target tracking and localization. To address underdetermined wideband signal processing in underwater passive detection system, this paper proposes a novel underdetermined wideband DOA estimation method equipped with the nested array (NA) using focused atomic norm minimization (ANM), where the signal source number detection is accomplished by information theory criteria. In the proposed DOA estimation method, especially, after vectoring the covariance matrix of each frequency bin, each corresponding obtained vector is focused into the predefined frequency bin by focused matrix. Then, the collected averaged vector is considered as virtual array model, whose steering vector exhibits the Vandermonde structure in terms of the obtained virtual array geometries. Further, the new covariance matrix is recovered based on ANM by semi-definite programming (SDP), which utilizes the information of the Toeplitz structure. Finally, the Root-MUSIC algorithm is applied to estimate the DOAs. Simulation results show that the proposed method outperforms other underdetermined DOA estimation methods based on information theory in term of higher estimation accuracy.

RESUMEN

The recovery of the underlying low-rank structure of clean data corrupted with sparse noise/outliers is attracting increasing interest. However, in many low-level vision problems, the exact target rank of the underlying structure and the particular locations and values of the sparse outliers are not known. Thus, the conventional methods cannot separate the low-rank and sparse components completely, especially in the case of gross outliers or deficient observations. Therefore, in this study, we employ the minimum description length (MDL) principle and atomic norm for low-rank matrix recovery to overcome these limitations. First, we employ the atomic norm to find all the candidate atoms of low-rank and sparse terms, and then we minimize the description length of the model in order to select the appropriate atoms of low-rank and the sparse matrices, respectively. Our experimental analyses show that the proposed approach can obtain a higher success rate than the state-of-the-art methods, even when the number of observations is limited or the corruption ratio is high. Experimental results utilizing synthetic data and real sensing applications (high dynamic range imaging, background modeling, removing noise and shadows) demonstrate the effectiveness, robustness and efficiency of the proposed method.

RESUMEN

Beamspace processing has become much attractive in recent radar and wireless communication applications, since the advantages of complexity reduction and of performance improvements in array signal processing. In this paper, we concentrate on the beamspace DOA estimation of linear array via atomic norm minimization (ANM). The existed generalized linear spectrum estimation based ANM approaches suffer from the high computational complexity for large scale array, since their complexity depends upon the number of sensors. To deal with this problem, we develop a low dimensional semidefinite programming (SDP) implementation of beamspace atomic norm minimization (BS-ANM) approach for DFT beamspace based on the super resolution theory on the semi-algebraic set. Then, a computational efficient iteration algorithm is proposed based on alternating direction method of multipliers (ADMM) approach. We develop the covariance based DOA estimation methods via BS-ANM and apply the BS-ANM based DOA estimation method to the channel estimation problem for massive MIMO systems. Simulation results demonstrate that the proposed methods exhibit the superior performance compared to the state-of-the-art counterparts.

RESUMEN

In this paper, three-dimensional (3-D) multiple-input multiple-output (MIMO) radar accurate localization and imaging method with motion parameter estimation is proposed for targets with complex motions. To characterize the target accurately, a multi-dimensional signal model is established including the parameters on target 3-D position, translation velocity, and rotating angular velocity. For simplicity, the signal model is transformed into three-joint two-dimensional (2-D) parametric models by analyzing the motion characteristics. Then a gridless method based on atomic norm optimization is proposed to improve precision and simultaneously avoid basis mismatch in traditional compressive sensing (CS) techniques. Once the covariance matrix is obtained by solving the corresponding semi-definite program (SDP), estimating signal parameters via rotational invariance techniques (ESPRIT) can be used to estimate the positions, then motion parameters can be obtained by Least Square (LS) method, accordingly. Afterwards, pairing correction is carried out to remove registration errors by setting judgment conditions according to resolution performance analysis, to improve the accuracy. In this way, high-precision imaging can be realized without a spectral search process, and any slight changes of target posture can be detected accurately. Simulation results show that proposed method can realize accurate localization and imaging with motion parameter estimated efficiently.

RESUMEN

An underdetermined direction of arrival (DOA) estimation method of wideband linear frequency modulated (LFM) signals is proposed without grid mismatch. According to the concentration property of LFM signal in the fractional Fourier (FRF) domain, the received sparse model of wideband signals with time-variant steering vector is firstly derived based on a coprime array. Afterwards, by interpolating virtual sensors, a virtual extended uniform linear array (ULA) is constructed with more degrees of freedom, and its covariance matrix in the FRF domain is recovered by employing sparse matrix reconstruction. Meanwhile, in order to avoid the grid mismatch problem, the modified atomic norm minimization is used to retrieve the covariance matrix with the consecutive basis. Different from the existing methods that approximately assume the frequency and the steering vector of the wideband signals are time-invariant in every narrowband frequency bin, the proposed method not only can directly solve more DOAs of LFM signals than the number of physical sensors with time-variant frequency and steering vector, but also obtain higher resolution and more accurate DOA estimation performance by the gridless sparse reconstruction. Simulation results demonstrate the effectiveness of the proposed method.

RESUMEN

High resolution range profile (HRRP) plays an important role in wideband radar automatic target recognition (ATR). In order to alleviate the sensitivity to clutter and target aspect, employing a sequence of HRRP is a promising approach to enhance the ATR performance. In this paper, a novel HRRP sequence-matching method based on singular value decomposition (SVD) is proposed. First, the HRRP sequence is decoupled into the angle space and the range space via SVD, which correspond to the span of the left and the right singular vectors, respectively. Second, atomic norm minimization (ANM) is utilized to estimate dominant scatterers in the range space and the Hausdorff distance is employed to measure the scatter similarity between the test and training data. Next, the angle space similarity between the test and training data is evaluated based on the left singular vector correlations. Finally, the range space matching result and the angle space correlation are fused with the singular values as weights. Simulation and outfield experimental results demonstrate that the proposed matching metric is a robust similarity measure for HRRP sequence recognition.

RESUMEN

Usually, bearing angle measurements are employed in triangulation methods to display the position of targets. However, in multi-radar and multi-target scenarios, triangulation approaches bring out ghosts that operate like real targets. This article proposes a target/ghost classifier that relies on the fact that the trajectory of a ghost is actually a function of trajectories of at least two targets and therefore, the complexity of a ghost trajectory is "greater" than the complexity of targets' trajectories.