RESUMEN

Bacterial antibiotic resistance has recently attracted increasing amounts of attention. Here, an artificially antibiotic-resistant bacterial community (ARBC) combined with five different constructed antibiotic-resistant bacteria (ARB) with single antibiotic resistance, namely, kanamycin (KAN), tetracycline (TET), cefotaxime (CTX), polymyxin B (PB), or gentamicin (GEM), was studied for the stress response to photocatalysis. With photocatalytic inactivation, the transfer and diffusion of antibiotic resistance genes (ARGs) in the ARBC decreased, and fewer multidrug-resistant bacteria (MDRB) emerged in aquatic environments. After several days of photocatalytic inactivation or Luria broth cultivation, >90% ARB were transformed to antibiotic-susceptible bacteria by discarding ARGs. Bacteria with double antibiotic resistance were the dominant species (99%) of residual ARB. The changes in ARG abundance varied, decreasing for the GEM and TET resistance genes and increasing for the KAN resistance genes. The change in the antibiotic resistance level was consistent with the change in ARG abundance. Correspondingly, point mutations occurred for the KAN, CTX and PB resistance genes after photocatalytic inactivation, which might be the reason why these genes persisted longer in the studied ARBC. In summary, photocatalytic inactivation could reduce the abundance of some ARGs and inhibit the emergence of MDRB as well as block ARG transfer in the bacterial community in aquatic environments. This work highlights the advantages of long-term photocatalytic inactivation for controlling antibiotic resistance and facilitates a better understanding of bacterial communities in real aquatic environments.

RESUMEN

This study investigates the genetic traits and transmission mechanisms of cephalosporin-resistant Escherichia coli in tropical aquatic environments in Singapore. From 2016 to 2020, monthly samples were collected from wastewater treatment plants, marine niches, community sewage, beaches, reservoirs, aquaculture farms, and hospitals, yielding 557 isolates that were analyzed for antimicrobial resistance genes (ARGs) and mobile genetic elements (MGEs) using genomic methods. Findings reveal significant genotypic similarities between environmental and hospital-derived strains, particularly the pandemic E. coli ST131. Environmental strains exhibited high levels of intrinsic resistance mechanisms, including mutations in porins and efflux pumps, with key ARGs such as CMY-2 and NDM-9 predominantly carried by MGEs, which facilitate horizontal gene transfer. Notably, pathogenic EPEC and EHEC strains were detected in community sewage and aquaculture farms, posing substantial public health risks. This underscores the critical role of these environments as reservoirs for multidrug-resistant pathogens and emphasizes the interconnectedness of human activities and environmental health.

RESUMEN

The threat posed by microplastics has become one of the world's most serious problems. Recent reports indicate that the presence of microplastics has been documented not only in coastal areas and beaches, but also in water reservoirs, from which they enter the bodies of aquatic animals and humans. Microplastics can also bioaccumulate contaminants that lead to serious damage to aquatic ecosystems. The lack of comprehensive data makes it challenging to ascertain the potential consequences of acute and chronic exposure, particularly for future generations. It is crucial to acknowledge that there is still a substantial need for rapid and effective techniques to identify microplastic particles for precise evaluation. Additionally, implementing legal regulations, limiting plastic production, and developing biodegradation methods are promising solutions, the implementation of which could limit the spread of toxic microplastics.

RESUMEN

Polyphosphate (polyP) is found in plankton of diverse aquatic ecosystems and is important for plankton ecology and biogeochemical cycling. However, our knowledge of polyP in aquatic environments is hindered by a lack of data due to the limitations of quantification methods. The estimate of polyP in model organisms using phenol-chloroform extraction followed by enzymatic hydrolysis is complicated and fails for environmental samples. The commonly used 4',6-diamidino-2-phenylindole (DAPI) fluorescence method for environmental studies, on the contrary, severely overestimates polyP due to interference. In this paper, we develop a plankton lysis buffer to extract polyP and a quantification method using a novel polyP-specific fluorescence dye JC-D7. We test the methods using cultured algae and bacteria, as well as natural samples from marine and freshwater environments. We show that our plankton lysis extracts polyP with high recovery while requiring substantially less time and effort. Subsequent polyP quantification using JC-D7 fluorescence overcomes the interference encountered by the DAPI method and provides an accurate measurement of polyP down to <0.5 µmol L-1. This novel method enables more accurate quantification of polyP in aquatic environments and will profoundly enhance our knowledge of polyP, plankton ecology, and biogeochemistry.

Asunto(s)

RESUMEN

A new worrying micropollutant threathens natural environments: the microfibres (MFs). Natural, regenerated and synthetic MFs have been detected in different environments, as well as in organisms. While synthetic MFs are generally detected in microplastic analyses, natural and regenerated MFs are not taken into account, or are wrongly considered plastics. They are generally considered biodegradable even if their degradation processes in ecosystems are poorly known. Their potential faster degradation could release toxic compounds, and their characteristics could led to a long-term accumulation in the environment. Understanding their dangerousness and the possible impact they could have on ecosystems is fundamental for environment conservation. We collected and investigated water and submerged sediment samples in different caves and springs of the Classical Karst Region (NE Italy), rich in protected habitats and species. MFs were analysed via microscopy and spectroscopy. MFs were found in all samples, highlighting pollution in surface and subterranean habitats of the karst system. MF concentration was higher in submerged sediments respect to waters, highlighting an accumulation of MFs over time. Big microfibres were less abundant, and MF amount increased with the decrease in the considered size. More than 80% of fibres were fluorescent under UV light. Fluorescent MFs were especially transparent, while non-fluorescent ones were mainly black and blue. Most MFs were cellulosic, and synthetic MFs represent only 15-22%, highlighting a significant gap between the MF composition detected in natural environments and the global production of synthetic textiles in recent times. Synthetic MFs were more abundant in waters. Our results improve the knowledge on micropollutants in karst environments, laying the foundations for future research. MF pollution monitoring in karst areas must become a priority for species protection, habitat conservation, and waters management, improving analyses on a larger number of aquatic environments, taking into account the ecological connections between surface and subterranean habitats.

Asunto(s)

RESUMEN

Estuaries play a crucial role in preventing the influx of metals from rivers into seas, thereby offering potential insights for the water purification industry. This study seeks to identify the key parameters (including pH, electricity conductivity (EC), and Eh) influencing the removal efficiency of Mn, Zn, Cu, Co, and Ni during natural and electro-flocculation processes in the Siahroud River estuary. The experiments were conducted in three stages, each representing varying salinity levels and voltage conditions, to determine the most effective parameters for metal removal. The findings revealed that heavy metal flocculation rates were highest at lower salinities (0.5 to 1.5 PSU), with no significant improvement in contaminant removal observed with increasing voltage. Electro-flocculation efficiency was found to be more dependent on Eh. Overall, the flocculation processes reduced the annual total dissolved metal content from 14.84 to 6.46 tons, underscoring the potential of this method in water quality management.

Asunto(s)

RESUMEN

Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquatic environment. Subsequently, the adhesion mechanisms employed by mussel byssal threads, sandcastle glue, and barnacle cement are demonstrated at the molecular level. The comprehension of adhesion mechanisms has promoted various biomimetic adhesive systems: DOPA-based biomimetic adhesives inspired by the chemical composition of mussel byssal proteins; polyelectrolyte hydrogels enlightened by sandcastle glue and phase transitions; and novel biomimetic adhesives derived from the multiple interactions and nanofiber-like structures within barnacle cement. Underwater biomimetic adhesion continues to encounter multifaceted challenges despite notable advancements. Hence, this work examines the current challenges confronting underwater biomimetic adhesion in the last part, which provides novel perspectives and directions for future research.

Asunto(s)

RESUMEN

Metals can be adsorbed on particulate matter, settle in sediments and cause alterations in aquatic environments. This study assesses the effect of Ag and/or Cd, both in ionic and nanoparticle (NP) forms, on the microbiome of sediments. For that purpose, aquatic controlled-microcosm experiments were exposed to an environmentally relevant and at tenfold higher doses of each form of the metals. Changes in the bacteriome were inferred by 16S rDNA sequencing. Ionic Ag caused a significant decrease of several bacterial families, whereas the effect was opposite when mixed with Cd, e.g., Desulfuromonadaceae family; in both cases, the bacteriome functionalities were greatly affected, particularly the nitrogen and sulfur metabolism. Compared to ionic forms, metallic NPs produced hardly any change in the abundance of microbial families, although the α-biodiversity of the bacteriome was reduced, and the functionality altered, when exposed to the NPs´ mixture. Our goal is to understand how metals, in different forms and combinations, released into the environment may endanger the health of aquatic ecosystems. This work may help to understand how aquatic metal pollution alters the structure and functionality of the microbiome and biogeochemical cycles, and how these changes can be addressed.

Asunto(s)

RESUMEN

Previous studies have shown that environmental DNA (eDNA) from human sources can be recovered from natural bodies of water, and the generation of DNA profiles from such environmental samples may assist in forensic investigations. However, fundamental knowledge gaps exist around the factors influencing the probability of detecting human eDNA and the design of optimal sampling protocols. One of these is understanding the particle sizes eDNA signals are most strongly associated with and the most appropriate filter size needed for efficiently capturing eDNA particles. This study assessed the amount of mitochondrial eDNA associated with different particle sizes from human blood and skin cells recovered from freshwater samples. Samples (300 mL) were taken from experimental 10 L tanks of freshwater spiked with 50 µL of human blood or skin cells deposited by vigorously rubbing hands together for two minutes in freshwater. Subsamples were collected by passing 250 mL of experimental water sample through six different filter pore sizes (from 0.1 to 8 µm). This process was repeated at four time intervals after spiking over 72 hours to assess if the particle size of the amount of eDNA recovered changes as the eDNA degrades. Using a human-specific quantitative polymerase chain reaction (qPCR) assay targeting the HV1 mitochondrial gene region, the total amount of mitochondrial eDNA associated with different particle size fractions was determined. In the case of human blood, at 0 h, the 0.45 µm filter pore size captured the greatest amount of mitochondrial eDNA, capturing 42 % of the eDNA detected. The pattern then changed after 48 h, with the 5 µm filter pore size capturing the greatest amount of eDNA (67 %), and 81 % of eDNA at 72 h. Notably, a ten-fold dilution proved to be a valuable strategy for enhancing eDNA recovery from the 8 µm filter at all time points, primarily due to the PCR inhibition observed in hemoglobin. For human skin cells, the greatest amounts of eDNA were recovered from the 8 µm filter pore size and were consistent through time (capturing 37 %, 56 %, and 88 % of eDNA at 0 hours, 48 hours, and 72 hours respectively). There is a clear variation in the amount of eDNA recovered between different cell types, and in some forensic scenarios, there is likely to be a mix of cell types present. These results suggest it would be best to use a 5 µm filter pore size to capture human blood and an 8 µm filter pore size to capture human skin cells to maximize DNA recovery from freshwater samples. Depending on the cell type contributing to the eDNA, a combination of different filter pore sizes may be employed to optimize the recovery of human DNA from water samples. This study provides the groundwork for optimizing a strategy for the efficient recovery of human eDNA from aquatic environments, paving the way for its broader application in forensic and environmental sciences.

Asunto(s)

RESUMEN

The increase of micro- and nano-plastics (MNPs) in aquatic environments has become a significant concern due to their potential toxicological effects on ecosystems, food web dynamics, and human health. These plastic particles emerge from a range of sources, such as the breakdown of larger plastic waste, consumer products, and industrial outputs. This review provides a detailed report of the transmission and dangers of MNPs in aquatic ecosystems, environmental behavior, and interactions within aquatic food webs, emphasizing their toxic impact on marine life. It explores the relationship between particle size and toxicity, their distribution in different tissues, and the process of trophic transfer through the food web. MNPs, once consumed, can be found in various organs, including the digestive system, gills, and liver. Their consumption by lower trophic level organisms facilitates their progression up the food chain, potentially leading to bioaccumulation and biomagnification, thereby posing substantial risks to the health, reproduction, and behavior of aquatic species. This work also explores how MNPs, through their persistence and bioaccumulation, pose risks to aquatic biodiversity and disrupt trophic relationships. The review also addresses the implications of MNPs for human health, particularly through the consumption of contaminated seafood, highlighting the direct and indirect pathways through which humans are exposed to these pollutants. Furthermore, the review highlights the recommendations for future research directions, emphasizing the integration of ecological, toxicological, and human health studies to inform risk assessments and develop mitigation strategies to address the global challenge of plastic pollution in aquatic environments.

Asunto(s)

RESUMEN

The use of microorganisms as beneficial crops for human and animal health has been studied for decades, and these microorganisms have been in practical use for quite some time. Nowadays, in addition to well-known examples of beneficial properties of lactic acid bacteria, bifidobacteria, selected Bacillus spp., and yeasts, there are several other bacteria considered next-generation probiotics that have been proposed to improve host health. Aquaculture is a rapidly growing area that provides sustainable proteins for consumption by humans and other animals. Thus, there is a need to develop new technologies for the production practices associated with cleaner and environment-friendly approaches. It is a well-known fact that proper selection of the optimal probiotics for use in aquaculture is an essential step to ensure effectiveness and safety. In this critical review, we discuss the evaluation of host-specific probiotics in aquaculture, challenges in using probiotics in aquaculture, methods to improve the survival of probiotics under different environmental conditions, technological approach to improving storage, and delivery along with possible negative consequences of using probiotics in aquaculture. A critical analysis of the identified challenges for the use of beneficial microbes in aquaculture will help in sustainable aquafarming, leading to improved agricultural practices with a clear aim to increase protein production.

RESUMEN

Wetland areas encompass a range of natural habitats characterized by high animal and plant biodiversity. Understanding the impacts of environmental decline in such areas requires in-depth knowledge of the overall biodiversity. This study dataset provides a first evaluation of important sites of insect and arachnids biodiversity in peat bogs, marshes, and streams in Aspromonte National Park in Calabria, southern Italy. It is a basic faunal survey that aids understanding of the importance of these large faunal groups in sites mainly within this national park. The data obtained highlight a rich insect and spider diversity in this region and provide useful information to use to outline strategies for the conservation and the management of inland aquatic environments at risk from climate change. Moreover, as baseline data, these will be useful for future monitoring and management of other inland aquatic environments that are similar to those of the study sites reported herein.

RESUMEN

The presence of Stenotrophomonas maltophilia in aquatic environments poses great health risks to immunocompromised individuals because of its multidrug resistance and resultant high mortality. However, a significant gap exists in the isolation and understanding of colistin-resistant S. maltophilia in aquatic environments. In this study, nine colistin-resistant S. maltophilia strains isolated from natural lakes were explored, and their phylogenetic relationship, biofilm formation, virulence, and antibiotic resistance profiles and underlying genetic determinants were assessed. After genome analysis, besides known multi-locus sequence typing (MLST) of ST532, new assigned ST965 and ST966 which phylogenetically clustered into soil isolates were found firstly. All the isolates exhibited resistance to multiple antibiotics, including aminoglycosides, beta-lactams, tetracyclines, and even colistin, with the highest minimum inhibitory concentration (MIC) against colistin reaching 640 mg/L. Comparative genomic analysis revealed aph(3')-Iic, blaL1, tetT, phoP, mcr-3, arnA, pmrE, and efflux pump genes as the genetic determinants underlying this multidrug resistance. Notably, the biofilm-forming capacities of the newly discovered ST965 and ST966 isolates were significant stronger than those of the known ST532 isolates (p < 0.01), resulting in the death of over 50 % of the Galleria mellonella population within 1 day of injection. The ST965 isolates demonstrated the highest virulence against G. mellonella, followed by the ST966 isolates and ST532 isolates which was phylogenetically clustered with clinical isolates, indicating that the novel S. maltophilia strains of ST965 and ST966 may pose considerable health risks to humans. Our findings provide insights into colistin-resistant S. maltophilia in aquatic environments and raise concerns about the health risks posed by the newly assigned sequence types of colistin-resistant S. maltophilia with potential high virulence in natural aquatic environments.

Asunto(s)

RESUMEN

Microplastic pollution in karst systems is still poorly studied, despite the presence of protected species and habitats, and important water reserves. Vulnerable key species hosted in these habitats could consume or assimilate microplastics, which can irreversibly damage management efforts, and thus ecosystems functionality. This can be particularly true for subterranean water habitats where microplastic pollution effects on wildlife management programs are not considered. The aim of this study is to provide a case study from the Classical Karst Region, which hosts peculiar habitats and key species protected at European level, such as the olm Proteus anguinus. As this area has been deeply exploited and modified over time, and is adjacent to highways, roads and railways, which could contribute to pollution within the karst system, threatening the ecosystems, it provides a perfect model system. In this study we collected and investigated water and sediment samples from aquatic environments of surface and subterranean habitats hosting several subterranean environment-adapted organisms. Examined particles were counted and characterized by size, color and shape via visual identification under a microscope, with and without UV light. Furthermore, spectroscopic analyses were carried out in order to identify microplastics typology. Microplastics were found in all examined habitats. In water, microplastics concentration ranged from 37 to 86 items/L, in sediments from 776 to 2064 items/kg. Fibre-shape was the main present, followed by fragments and beads, suggesting multiple sources of pollution, especially textile products. Most of the particles were fluorescent under UV light and were mainly transparent, while not-fluorescent ones were especially black, blue or brown. Samples contained especially polyesters and copolymers. These results highlight intense MP pollution in karst areas, with significant impacts on water quality, and potential effects on subterranean environment-dwelling species. We stress the importance of monitoring pollution in these critical environments for biodiversity and habitat conservation: monitoring in karst areas must become a priority for habitat and species protection, and water resources management, improving analyses on a larger number of aquatic surface and subterranean habitats.

Asunto(s)

RESUMEN

Significant concerns on a global scale have been raised in response to the potential adverse impacts of emerging pollutants (EPs) on aquatic creatures. We have carefully reviewed relevant research over the past 10 years. The study focuses on five typical EPs: pharmaceuticals and personal care products (PPCPs), per- and polyfluoroalkyl substances (PFASs), drinking water disinfection byproducts (DBPs), brominated flame retardants (BFRs), and microplastics (MPs). The presence of EPs in the global aquatic environment is source-dependent, with wastewater treatment plants being the main source of EPs. Multiple studies have consistently shown that the final destination of most EPs in the water environment is sludge and sediment. Simultaneously, a number of EPs, such as PFASs, MPs, and BFRs, have long-term environmental transport potential. Some EPs exhibit notable tendencies towards bioaccumulation and biomagnification, while others pose challenges in terms of their degradation within both biological and abiotic treatment processes. The results showed that, in most cases, the ecological risk of EPs in aquatic environments was low, possibly due to potential dilution and degradation. Future research topics should include adding EPs detection items for the aquatic environment, combining pollution, and updating prediction models.

Asunto(s)

RESUMEN

Water soluble organic carbon (WSOC) derived from biomass pyrolytic smoke is deposited through atmospheric aerosols, negatively affecting aquatic ecological quality and safety. However, the temperature-dependent molecular diversity and dynamic formation of smoke-derived WSOC remain poorly understood in water. Herein, we explored the molecular-level formation mechanism of pyrolytic smoke-derived WSOC in water to explain the evolution, heterogeneous correlations, and sequential responses of molecules and functional groups to increasing pyrolysis temperature. Two-dimensional correlation spectroscopy was used to innovatively establish the characteristic correlations between spectroscopy and Fourier transform-ion cyclotron resonance mass spectrometry. Temperature-dependent formation of WSOC exhibited diversity in absorbance/fluorescent components, unique/common molecules, and their chemical parameters, showing the simultaneous formation and degradation reactions. The common WSOC molecules with lower and higher degrees of oxidation showed significant positive and negative correlations with the fluorescent components, respectively. The primary sequential response of WSOC molecules to increasing pyrolysis temperature (lignin-like molecules â†’ unsaturated hydrocarbons, condensed aromatic molecules â†’ lipid-like/aliphatic-/peptide-like molecules) corresponded to the temperature response of functional groups (carboxylic/alcoholic â†’ polysaccharides â†’ aromatics/amides/phenolic/aliphatic groups), demonstrating well synergistic relationships between them. These novel findings will contribute to the comprehensive understanding and assessments of potential environmental behavior or risks of WSOC in aquatic ecosystems.

Asunto(s)

RESUMEN

The environmental hazards of microplastics have received widespread attention. However, the in-situ detection of microplastics, particularly in aquatic environments, has been challenged by the limitations of detection methods, the large-scale instruments, and small size. Herein, a photoelectrochemical sensor based on the protein corona-induced aggregation effect is designed for the detection of polystyrene microplastics. The sensor has advantages of high sensitivity, reproducibility, and detection capability. A linear detection range of 0.5-500 µg mL-1, a method detection limit of 0.06 µg mL-1, and a limit of quantification of 0.14 µg mL-1 are achieved. Furthermore, the relative standard deviations of intra-day and inter-day precision, ranging from 0.56% to 4.63% and 0.84%-3.36% are obtained. A digital multimeter was employed to construct a platform for the real-time detection in real water samples, streamlining the detection process and yielding clear results. We believe this sensor provides new insight for the in-situ real-time detection of microplastics and has broad applications for the analysis of microplastic pollution in aquatic environments.

Asunto(s)

RESUMEN

Early recovery of human bodies from the water requires an understanding of how a body acts in the water. However, there is currently a lack of baseline data surrounding body movement in British Columbian (B.C.) waters. This study aims to assist Canadian response agencies with understanding and predicting body movement in outdoor waterbodies in B.C. One hundred and eighty-six water-related fatalities in B.C. waters, including lakes, rivers, and the coastal Pacific Ocean, were examined to determine the recovery times and displacement patterns of submerged decedents. Cases between 2010 and 2021 were extracted from the Police Records Information Management Environment (PRIME-BC) for analysis. Most deaths were unintentional, followed by suicide and homicide, and most often occurred in rivers, followed by lakes and the ocean. Regardless of waterbody, the first day was the most successful recovery period, with decedents most often recovered close to the incident location. Nearly 16% of individuals in this study were not recovered. Recovery success was greatest in lakes, followed by rivers and the ocean. Body displacement was the least in lakes, while rivers resulted in the furthest and most variable displacement. Low recovery success in the ocean is likely due to decedents being quickly displaced out of the search area, never to be found. The results of this study suggest that knowledge of body movement in outdoor aquatic environments remains incomplete. Further empirical research based on known data is necessary to continue improving prediction of body movement and increase early recovery success.

Asunto(s)

RESUMEN

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Asunto(s)

RESUMEN

Waterpipe tobacco wastes (WTWs) may contain considerable levels of hazardous contaminants such as BTEX (benzene, toluene, ethylbenzene, o-xylene, and m/p-xylene). However, no research has been carried out on BTEX levels in WTWs and the release of these pollutants into the water environment. This research examined the levels of BTEX in WTWs of flavored/local tobacco and also the release rate of these toxins into three kinds of water, including seawater (SW), tap water (TW), and distilled water (DW) with different leaching times (15, 30 min, 1.2, 4, 8 h, and 1, 2, and 4 days). The mean contents of BTEX in WTW samples of Al-Mahmoud, Al-Fakher, Mazaya, Al-Ayan brands, and local tobacco samples were 17.0 ± 4.14, 19.1 ± 4.65, 19.6 ± 4.19, 18.8 ± 4.14, and 3.16 ± 0.63 µg/kg, respectively. The mean BTEX levels in flavored tobacco samples were considerably greater than that of local tobacco (p < 0.05). The WTWs leaching experiments showed that the levels of BTEX ranged from 5.26 to 6.12, 5.02-5.60, and 3.83-5.46 µg/L in DW, TW, and SW, respectively. All target compounds were found for all exposure times in DW, TW, and SW samples. After adding sodium azide as an antibacterial agent to water samples (simulating biodegradation processes), higher levels of BTEX compounds were detected in SW. Further research is needed to address the potential environmental hazards due to WTWs leaching into aquatic environments.