Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
1.
J Biomech ; 146: 111422, 2023 01.
Artículo en Inglés | MEDLINE | ID: mdl-36610388

RESUMEN

Transvalvular pressure gradient (ΔP) after aortic valve replacement is an important surrogate of aortic bioprostheses performance. Invasive ΔP is often measured after transcatheter aortic valve replacement to exclude patient-prosthetic mismatch. However, invasive aortic pressures are usually recorded in the pressure recovery (PR) zone downstream of the valve, potentially resulting in ΔP underestimation compared to noninvasive measurements. PR was extensively studied in straight ascending aortas. However, the impact of various aortic arch configurations on ΔP has not been explored. PR was assessed in a pulse duplicating simulator at various cardiac conditions of cardiac output, heart rates and pressures. Three different aortic geometries with identical root dimensions but with different aortic arches were used: (1) curvature 1, (2) curvature 2, and (3) straight aortic models. Instantaneous pressure and peak ΔP measurements were recorded incrementally along the models for each cardiac condition. The models with aortic arches produced two distinct PR zones (after the valve and after the aortic arch), whereas the model without an aortic arch produced only one PR zone (after the valve). The trend of the pressure and ΔP curves for each model was independent of the cardiac condition used, but the individually measured pressure magnitudes did change with different conditions. In this study, we illustrated the differences in PR between distinct aortic curvatures and straight aorta. PR affects pressure and ΔP measurements. These effects are clear when recording aortic pressures by catheterization and echocardiography.


Asunto(s)
Estenosis de la Válvula Aórtica , Prótesis Valvulares Cardíacas , Reemplazo de la Válvula Aórtica Transcatéter , Humanos , Válvula Aórtica/fisiología , Gasto Cardíaco , Estenosis de la Válvula Aórtica/cirugía , Aorta , Diseño de Prótesis
2.
J Thorac Cardiovasc Surg ; 166(1): 11-21.e1, 2023 07.
Artículo en Inglés | MEDLINE | ID: mdl-34217540

RESUMEN

BACKGROUND: The geometrical characterization of ascending thoracic aortic aneurysms in clinical practice is limited to diameter measurements. Despite growing interest in hemodynamic assessment, its relationship with ascending thoracic aortic aneurysm pathogenesis is poorly understood. This study examines the relationship between geometry of the ventriculo-aortic junction and blood flow patterns in ascending thoracic aortic aneurysm disease. METHODS: Thirty-three patients with ascending thoracic aortic aneurysms (exclusions: bicuspid aortic valves, connective tissue disease) underwent 4-dimensional flow magnetic resonance imaging. After image segmentation, geometrical parameters were measured, including aortic curvature, tortuosity, length, and diameter. A unique angular measurement made by the trajectory of the left ventricular outflow tract axis and the proximal aorta was also conducted. Velocity profiles were quantitatively and qualitatively analyzed. In addition, 11 patients (33%) underwent wall shear stress mapping of the ascending thoracic aortic aneurysm region using computational fluid dynamics simulation. RESULTS: Greater left ventricular outflow tract aortic angles were associated with larger aortic diameters at the levels of the sinus (coefficient = 0.387, P = .014) and ascending aorta (coefficient = 0.284, P = .031). Patients with left ventricular outflow tract aortic angles greater than 60° had marked asymmetric flow acceleration on the outer curvature in the proximal aorta, ascertained from 4-dimensional flow analysis. For patients undergoing computational fluid dynamics assessment, regression analysis found that higher left ventricular outflow tract aortic angles were associated with significantly higher wall shear stress values in the outer curve of the aorta (coefficient 0.07, 95% confidence interval 0.04-0.11, P = .002): Angles greater than 50° yielded time-averaged wall shear stress values greater than 2.5 Pa, exhibiting a linear relationship. CONCLUSIONS: Our findings strengthen the hypothesis of flow-mediated ascending thoracic aortic aneurysm disease progression and that left ventricular outflow tract aortic angle may be a predictor of disease severity.


Asunto(s)
Aneurisma de la Aorta Ascendente , Humanos , Aorta/diagnóstico por imagen , Aneurisma de la Aorta , Aneurisma de la Aorta Torácica/etiología , Aneurisma de la Aorta Torácica/complicaciones , Válvula Aórtica , Hemodinámica/fisiología , Estrés Mecánico
3.
Biomech Model Mechanobiol ; 18(1): 261-273, 2019 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-30306291

RESUMEN

Fibrillin-1 is an elastin-associated glycoprotein that contributes to the long-term fatigue resistance of elastic fibers as well as to the bioavailability of transforming growth factor-beta (TGFß) in arteries. Altered TGFß bioavailability and/or signaling have been implicated in aneurysm development in Marfan syndrome (MFS), a multi-system condition resulting from mutations to the gene that encodes fibrillin-1. We recently showed that the absence of the latent transforming growth factor-beta binding protein-3 (LTBP-3) in fibrillin-1-deficient mice attenuates the fragmentation of elastic fibers and focal dilatations that are characteristic of aortic root aneurysms in MFS mice, at least to 12 weeks of age. Here, we show further that the absence of LTBP-3 in this MFS mouse model improves the circumferential mechanical properties of the thoracic aorta, which appears to be fundamental in preventing or significantly delaying aneurysm development. Yet, a spinal deformity either remains or is exacerbated in the absence of LTBP-3 and seems to adversely affect the axial mechanical properties of the thoracic aorta, thus decreasing overall vascular function despite the absence of aneurysmal dilatation. Importantly, because of the smaller size of mice lacking LTBP-3, allometric scaling facilitates proper interpretation of aortic dimensions and thus the clinical phenotype. While this study demonstrates that LTBP-3/TGFß directly affects the biomechanical function of the thoracic aorta, it highlights that spinal deformities in MFS might indirectly and adversely affect the overall aortic phenotype. There is a need, therefore, to consider together the vascular and skeletal effects in this syndromic disease.


Asunto(s)
Aorta/patología , Aneurisma de la Aorta Torácica/patología , Proteínas de Unión a TGF-beta Latente/deficiencia , Síndrome de Marfan/patología , Médula Espinal/patología , Animales , Aorta/fisiopatología , Aneurisma de la Aorta Torácica/fisiopatología , Fenómenos Biomecánicos , Genotipo , Proteínas de Unión a TGF-beta Latente/metabolismo , Masculino , Ratones Endogámicos C57BL , Fenotipo , Médula Espinal/fisiopatología
5.
J Endovasc Ther ; 24(3): 411-417, 2017 06.
Artículo en Inglés | MEDLINE | ID: mdl-28349777

RESUMEN

PURPOSE: To evaluate the association between aortic curvature and other preoperative anatomical characteristics and late (>1 year) type Ia endoleak and endograft migration in endovascular aneurysm repair (EVAR) patients. METHODS: Eight high-volume EVAR centers contributed 116 EVAR patients (mean age 81±7 years; 103 men) to the study: 36 patients (mean age 82±7 years; 31 men) with endograft migration and/or type Ia endoleak diagnosed >1 year after the initial EVAR and 80 controls without early or late complications. Aortic curvature was calculated from the preoperative computed tomography scan as the maximum and average curvature over 5 predefined aortic segments: the entire infrarenal aortic neck, aneurysm sac, and the suprarenal, juxtarenal, and infrarenal aorta. Other morphological characteristics included neck length, neck diameter, mural neck calcification and thrombus, suprarenal and infrarenal angulation, and largest aneurysm sac diameter. Independent risk factors were identified using backward stepwise logistic regression. Relevant cutoff values for each of the variables in the final regression model were determined with the receiver operator characteristic curve. RESULTS: Logistic regression identified maximum curvature over the length of the aneurysm sac (>47 m-1; p=0.023), largest aneurysm sac diameter (>56 mm; p=0.028), and mural neck thrombus (>11° circumference; p<0.001) as independent predictors of late migration and type Ia endoleak. CONCLUSION: Aortic curvature is a predictor for late type Ia endoleak and endograft migration after EVAR. These findings suggest that aortic curvature is a better parameter than angulation to predict post-EVAR failure and should be included as a hostile neck parameter.


Asunto(s)
Aneurisma de la Aorta Abdominal/cirugía , Implantación de Prótesis Vascular/efectos adversos , Endofuga/etiología , Procedimientos Endovasculares/efectos adversos , Migración de Cuerpo Extraño/etiología , Anciano , Anciano de 80 o más Años , Aneurisma de la Aorta Abdominal/diagnóstico por imagen , Aortografía/métodos , Área Bajo la Curva , Prótesis Vascular , Implantación de Prótesis Vascular/instrumentación , Estudios de Casos y Controles , Distribución de Chi-Cuadrado , Angiografía por Tomografía Computarizada , Endofuga/diagnóstico por imagen , Procedimientos Endovasculares/instrumentación , Femenino , Migración de Cuerpo Extraño/diagnóstico por imagen , Humanos , Modelos Logísticos , Masculino , Análisis Multivariante , Países Bajos , Curva ROC , Factores de Riesgo , Stents , Factores de Tiempo , Resultado del Tratamiento
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA