RESUMEN

A series of x%Ho3+, 5 %Tm3+, y%Yb3+:Bi2WO6 (x = 0, 0.5, 1, 3, 5; y = 0.5, 1, 3) luminescent materials was prepared using a high-temperature solid-phase method. The microstructure, up-conversion luminescence, and temperature sensing properties of the synthesized powders were analyzed. X-ray diffraction patterns revealed that doping with Ho3+, Tm3+, and Yb3+ ions at certain concentrations did not affect the orthorhombic crystal structure of the Bi2WO6 host. Scanning electron microscopy revealed that the morphology of the sample consisted of lumpy particles with a particle size range of 1-5 µm and agglomeration. SEM mapping and energy-dispersive X-ray spectroscopy analyses revealed that each element was relatively uniformly distributed on the particle surface. Under 980 nm excitation (380 mW), the strongest luminescence of the sample was obtained when both Ho3+ and Yb3+ doping concentrations were 1 %. Compared with the luminescence of the 5 %Tm3+ and 1 %Yb3+:Bi2WO6 sample, with increasing Ho3+ concentrations, the luminescence intensity of Tm3+ was first enhanced and subsequently weakened, whereas the luminescence of Ho3+ was significantly weakened, which indicates the positive energy transfer from Ho3+ â†’ Tm3+. At 980 nm (80-380 mW), for the 1 %Ho3+, 5 %Tm3+, and 1 %Yb3+:Bi2WO6 sample, the 538 nm, 545 nm, 660 nm, and 804 nm emission peaks originated from the two-photon absorption. FIR660 nm/804 nm, FIR545 nm/804 nm, and FIR538 nm/804 nm were used to characterize the temperature and corresponded to temperature sensitivities Sr of 0.0046 K-1, 0.022 K-1 and 0.024 K-1 at 573 K, respectively. At 498 K, the minimum temperature resolution δT values were 0.03384 K, 0.03203 K and 0.04373 K. When the temperature increased from 298 K to 573 K, the powder sample luminescence gradually shifted from the yellow-green region to the red region. The results of environmental discoloration and thermochromic performance tests indicate that this sample has potential application in optical anti-counterfeiting. FIR804 nm /660 nm and FIR804 nm /538 nm were obtained for the 40 NTU turbidity suspension under identical excitation conditions. At 298 K, for the 40 NTU turbidity sample, the maximum Sr values were 0.0197 K-1 and 0.0405 K-1; at 340 K, the minimum temperature resolutions δT values were 0.54037 K and 0.66237 K. When the temperature decreased from 340 K to 298 K, the luminescence of the 40 NTU suspension samples gradually shifted from the yellow region to the green region.

RESUMEN

Carbon dots (CDs) are an emerging type of fluorescent carbon nanomaterial with broad application prospects. Among them, photochromic CDs have been widely used in the field of optoelectronic devices but rarely in ultraviolet (UV) detection. In this work, we successfully developed photochromic CDs that exhibit reversible emission under light stimulation in an amine solvent system. Notably, the CDs showed ultrafast photochromic behavior in diethylamine solvent, shifting the fluorescence color from cyan-green to orange-red after 2 s of irradiation, with the solution color changing from pale yellow to pale purple. Furthermore, this performance could recover without additional stimuli, simply by standing for several tens of seconds. Structural analysis indicated that rapid photochromism arises from changes in the surface functional group radicals of the CDs, with the reversibility attributed to fluctuation in these radicals. Leveraging the excellent photochromic properties of CDs, we further developed a device for detecting UV indices in sunlight. This opens up broad prospects for developing high-performance UV detection devices based on CDs.

RESUMEN

Eco-friendly lead-free halide perovskites have emerged as promising materials for multiple applications due to their unique optoelectronic properties. In this work, we investigate the ammonia (NH3)-sensitive CsCu2I3 film for its potential in NH3 sensor and stimuli-responsive fluorescence anti-counterfeiting. CsCu2I3-based NH3 sensor demonstrates a high response to NH3 (△R/R0 = 1.07, at 100 ppm NH3) with rapid response/recovery time (21/19 s), as well as favorable gas selectivity. We proposed a potential NH3 sensing mechanism with the help of a series of semi-quantitative characterizations and excitation-dependent emission experiments. The electron-donating NH3 molecules can efficiently donate electrons to the p-type CsCu2I3 film, bringing about a decrease in film conductivity. Additionally, the adsorption of NH3 can also disorder the CsCu2I3 crystals with a high density of trap states, facilitating an energy transfer from self-trapped excitons (STEs) emission to defect-related emission, along with bright orange luminescence. Inspired by this phenomenon, we proposed a novel application of NH3-induced stimuli-responsive fluorescence for anti-counterfeiting. The results highlight the potential of CsCu2I3 for effective dual-function applications in gas sensors and gas-triggered anti-counterfeiting.

RESUMEN

Many amines with high toxicity always cause a serious threat to the ecological environment and human health; thus, their detection is important. Herein, a dual-mode colorimetric and ratiometric fluorescent sensor based on cellulose for detecting amines has been constructed by a new strategy. This sensor is made of a "negative response" indicator (Lum-MDI-CA) and a "positive response" indicator (perylene tetracarboxylic acid, PTCA). Lum-MDI-CA was obtained by attaching luminol onto cellulose chains, which emitted blue fluorescence and was quenched upon contact with amines. A possible mechanism of fluorescence quenching phenomenon is proposed by the intramolecular charge transfer (ICT) of Lum-MDI-CA. Subsequently, by simply mixing Lum-MDI-CA with PTCA, a dual-mode fluorescence sensor was designed for visual detection and classification of amines. When adding ammonia (NH3), morpholine (MOR), benzylamine (BNZ), diethylamine (DEA), and triethylamine (TEA), respectively, the dual-mode sensor showed visible different color changes under both UV light and daylight. In addition, owing to the excellent processibility and formability of cellulose acetate backbone, the prepared sensor can be easily processed into different material forms, including inks, coatings, films, and fibers, which still exhibit excellent fluorescence emission. Such sensors based on cellulose fluorescent materials are of great value in anti-counterfeiting and information encryption.

RESUMEN

A highly water-soluble and fluorescent N,S-doped carbon dots/europium (N,S-CDs/Eu) was successfully synthesized via a secondary hydrothermal method. This involved surface modification of N,S-CDs derived from sunflower stem pith (SSP) with europium ions (Eu3+) doping. When excited within the range of 400-470 nm, N,S-CDs/Eu exhibited a stable and broad optimal emission wavelength ranging from 505 to 540 nm. Notably, the photoluminescence quantum yield (PLQY) of N,S-CDs/Eu is 31.4%, significantly higher than the 19.5% observed for N,S-CDs. Additionally, by dissolving N,S-CDs/Eu into polyvinyl alcohol (PVA), a uniform fluorescent anti-counterfeiting ink can be prepared. The N,S-CDs/Eu/TiO2 composite demonstrates excellent photocatalytic degradation ability towards the organic dye methylene blue (MB). N,S-CDs/Eu has potential in the field of fluorescent inks and photocatalysis due to its simple and efficient preparation and excellent properties.

Asunto(s)

RESUMEN

Artificial photomodulated channels represent a significant advancement toward practical photogated systems because of their remote noncontact stimulation. Ion transport behaviors in artificial photomodulated channels, however, still require further investigation, especially in multiple nanochannels that closely resemble biological structures. Herein, we present the design and development of photoswitchable ion nanochannels inspired by natural channelrhodopsins (ChRs), utilizing photoresponsive polymers grafted anodic aluminum oxide (AAO) membranes. Our approach integrates spiropyran (SP) as photoresponsive molecules into nanochannels through surface-initiated atom transfer radical polymerization (SI-ATRP), creating a responsive system that modulates ionic conductivity and hydrophilicity in response to light stimuli. A key design feature is the reversible ring-opening photoisomerization of spiropyran groups under UV irradiation. This transformation, observable at the molecular level and macroscopically, allows the surface inside the nanochannels to switch between hydrophobic and hydrophilic states, thus efficiently modulating ion transport via changing water wetting behaviors. The patternable and erasable polySP-grafted AAO, based on a controllable and reversible photochromic effect, also shows potential applications in anticounterfeiting. This study pioneers achieving macroscopic anticounterfeiting and photoinduced photoswitching through reversible surface chemistry and expands the application of polymer-grafted structures in multiple nanochannels.

RESUMEN

Carbon dots (CDs) have garnered extensive interest in basic physical chemistry as well as in biomedical applications due to their low cost, good biocompatibility, and great aqueous solubility. However, the synthesis of multi-functional carbon dots has always been a challenge for researchers. Here, we synthesized novel CDs with a high quantum yield of 28.2% through the straightforward hydrothermal method using Diaminomaleonitrile and Boc-D-2, 3-diaminopropionic acid. The size, chemical functional group, and photophysical properties of the CDs were characterized by TEM, FTIR, XPS, UV, and fluorescence. It was demonstrated in this study that the prepared CDs have a high quantum yield, excellent photostability, and low cytotoxicity. Regarding the highly water-soluble property of CDs, they were proven to possess selective and sensitive behavior against Cu2+ ions (linear range = 0-9 µM and limit of detection = 1.34 µM). Moreover, the CDs were utilized in fluorescent ink in anti-counterfeiting measures. Because of their low cytotoxicity and good biocompatibility, the CDs were also successfully utilized in cell imaging. Therefore, the as-prepared CDs have great potential in fluorescence sensing, anti-counterfeiting, and bioimaging.

Asunto(s)

RESUMEN

Exploring structural phase transitions and luminescence mechanisms in Zero-dimensional (0D) metal halides poses significant challenges, that are crucial for unlocking the full potential of tunable optical properties and diversifying their functional capabilities. Herein, we have designed two inter-transformable 0D Cu(I)-based metal halides, namely (C19H18P)2CuI3 and (C19H18P)2Cu4I6, through distinct synthesis conditions utilizing identical reactants. Their optical properties and luminescence mechanisms were systematically elucidated by experiments combined with density functional theory calculations. The bright cyan-fluorescent (C19H18P)2CuI3 with high photoluminescence quantum yield (PLQY) of 77% is attributed to the self-trapped exciton emission. Differently, the broad yellow-orange fluorescence of (C19H18P)2Cu4I6 displays a remarkable PLQY of 83%. Its luminescence mechanism is mainly attributed to the combined effects of metal/halide-to-ligand charge transfer and cluster-centered charge transfer, which effects stem from the strong Cu-Cu bonding interactions in the (Cu4I6)2- clusters. Moreover, (C19H18P)2CuI3 and (C19H18P)2Cu4I6 exhibit reversible structural phase transitions. The elucidation of the phase transitions mechanism has paved the way for an unforgeable anti-counterfeiting system. This system dynamically shifts between cyan and yellow-orange fluorescence, triggered by the phase transitions, bolstering security and authenticity. This work enriches the luminescence theory of 0D metal halides, offering novel strategies for optical property modulation and fostering optical applications.

RESUMEN

A new bismuth-based host material, i.e., Sr2BiF7, is explored in this work. Undoped and lanthanide ion-doped Sr2BiF7 nanomaterials are prepared using a simple coprecipitation technique at 120 °C. The undoped nanomaterials exhibit a blue color under 365 nm excitation. The downshifting and upconversion photoluminescent properties of Er and Yb codoped Sr2BiF7 nanomaterials are investigated. The optimum up-conversion luminescence is produced by nanomaterials doped with 5% Yb3+ and 0.2% Er3+. These nanomaterials show blue and magenta colors upon excitation at 365 and 395 nm wavelengths, respectively. Sr2BiF7 material doped with Er3+ shows green emission, while the codoped Er3+, Yb3+ nanomaterials exhibit an orange-red color under 980 nm light. A specific amount of polyvinyl chloride (PVC) is used for producing luminescent ink with these nanoparticles for multimode anticounterfeiting applications. The letters and patterns written with luminescent ink based on Er3+, Yb3+ doped nanomaterials show blue, magenta, and orange-red colors under 365, 395, and 980 nm light, respectively. These results establish that this material can be effectively used as a multimode photoluminescent covert tag to combat counterfeiting.

RESUMEN

The core-shell structured Ag@SiO2 nanomaterial integrated with surface-enhanced Raman scattering (SERS) spectroscopy promises a critical application in anti-counterfeiting. Security labels have been fabricated based on Ag@SiO2 embedded with Raman reporters. The Ag@SiO2 nanomaterial shows good stability and excellent anti-interference property for anti-counterfeiting. Multiple kinds of Raman probe molecules have been anchored in the Ag@SiO2 labels to provide specific and abundant encoding information. The flexible encoding security information could be controlled conveniently by adjusting probe molecules, which not only enrich the SERS information but also improve the level of anti-counterfeiting. Furthermore, the Ag@SiO2 shown excellent stability in organic solvent, and successfully used in ink for the anti-counterfeiting application.

RESUMEN

Multi-mode dynamic anti-counterfeiting materials can provide complex anti-counterfeiting performance and ensure the anti-counterfeiting strategy becomes more secure. Herein, a new type of multi-mode anti-counterfeiting encryption material of CaAl12O19:Eu, Er with different Er doping concentration was developed by sol-gel method. Interestingly, the CaAl12O19:Eu, Er phosphor and its composite have multi-mode anti-counterfeiting characteristics of multi-color down-conversion luminescence, up-conversion luminescence, dynamic luminescence, and photochromism. Effect of different Er doping concentration on the down-conversion luminescence, up-conversion luminescence, dynamic luminescence, and photochromism of CaAl12O19:Eu, Er was systematically investigated, and the relevant mechanisms were discussed. These anti-counterfeiting features can be simultaneously applied in both bright and dark fields, which can achieve high-level anti-counterfeiting in both spatial and temporal dimensions. The CaAl12O19:Eu, Er phosphors cannot be easily replaced by other materials with the same anti-counterfeiting properties. They display good application foreground in the field of anti-counterfeiting encryption.

RESUMEN

Fluorescent composites have widespread applications in many aspects. Wood-derived cellulose is a renewable, easily processed and biodegradable, and cellulose-based fluorescent composites are highly favored for in different fields. However, the existing cellulose-based fluorescent composites still have many urgent problems to be solved, such as unstable luminescence properties and easy shedding of luminescent substances, and the development of their practical applications is still a formidable challenge. Herein, a green and mild strategy for the in-situ controllable synthesis of cellulose-based fluorescent composites membrane (CFM) was developed. Firstly, delignified wood (DW) was modified with citric acid, and then lanthanide ions were introduced on modified DW through coordinated covalent bonds. Additionally, the luminescence mechanism of CFM is proposed. CFMs show adjustable color for decorative and light conversion and can be accurately identified for data protection, which increases the high value-added of cellulose-based composites. The stable luminescent properties were maintained after sonication for 30 min or solvent immersion for three months. Therefore, this work presents a new approach for the synthesis of CFM, which provides an environment-friendly strategy for manufacturing cellulose-based fluorescent materials, which is significant for the subsequent development of environment-friendly composites for anti-counterfeiting and decorative applications.

Asunto(s)

RESUMEN

Six biomass carbon dots (BCDs) with adjustable emission from 450 to 680 nm under a single wavelength excitation were successfully synthesized from spinach via solvent control strategy. The obtained BCDs show blue, green, yellow, violet, pink, and red emission with high photoluminescence quantum yield (PLQY = 12.68 ~ 30.77%). Detailed characterizations disclose that the tunable-emission mechanism is caused by the synergistic effect of carbon conjugate and surface oxidation degree. Meanwhile, full-color photoluminescence BCDs/PVP powder and BCDs/PVP/PVA films were fabricated by utilizing the prepared BCDs combined with polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA), respectively, which presented excellent high-level information encryption application. Importantly, multi-color and white light-emitting diode (LED) with Commission Internationale de L' Eclairage (CIE) of blue (0.25, 0.29); green (0.25, 0.31); yellow (0.42, 0.45); red (0.52, 0.31); and white (0.32, 0.31) were achieved by only using our prepared BCDs. This work provides a valuable strategy of preparing multi-color BCDs using readily available biomass materials and paves a way for high-level information encryption and LED applications.

RESUMEN

Photoluminescent materials are widely used for information storage and anticounterfeiting, while most of them have the disadvantages of static information performance and weak processability, which is still a challenging task in developing dynamic anticounterfeiting materials with high security levels. Herein, we fabricated a novel photostimuli-responsive dual-emitting luminescent material UPTES-SPn-Tb-hfa, which was obtained by introducing the photochromic molecule spiropyran (SP) and lanthanide complex (Tb-hfa) into a siloxane-polyether matrix using the sol-gel process. Due to the conformation-dependent photochromic fluorescence resonance energy transfer between the Tb-hfa donor and SP acceptor, the ring-closing (SP)/ring-opening (MC) isomerization of the SP unit leads to a reversible luminescence switching in UPTES-SPn-Tb-hfa. This composite material has great potential for advanced anticounterfeiting because of the advantage of rapidly repeatable encryption/decryption for at least 8 times and dynamic luminescent colors within 15 s. In addition, due to its two luminescent centers (Tb3+ and MC), the luminescent color of this material can be regulated by 254 and 365 nm UV-light irradiation, which facilitates the design of multicolored anticounterfeiting labels. Our work presents a novel design methodology to fabricate dynamic anticounterfeiting materials, significantly enhancing the security of anticounterfeiting applications.

RESUMEN

In recent years, the progress toward lighting miniaturization is focused on luminescent nanomaterials. Among them, fluorescent carbon dots (CDs) are receiving increasing attention thanks to their astonishing optical properties complemented by their intrinsic biocompatibility and low toxicity. The CDs can be easily dispersed in water, organic solvents or incorporated in polymeric matrices, preserving their emission properties. However, the relationship between their structural and optical properties is still not fully elucidated, motivating a consistent research effort for the comprehension of their features. Nevertheless, CDs demonstrate to be efficient gain materials for lasing, thanks to their high quantum yield (QY), emission tunability in the visible and near infrared (NIR) range, short lifetimes, and high absorption cross section, even if the synthetic reproducibility, the low reaction yield and the spectral width of the emission may limit their effective exploitation. This review summarizes the latest advancements in the investigation of the characteristic properties of CDs that make laser action possible, illustrating optical geometries for lasing and random lasing, both in solution and solid state, and the few currently demonstrated breakthroughs. While the journey toward their effective application is still long, the potential of CD-based laser sources is promising in various technological fields and futuristic perspectives will be discussed.

RESUMEN

A method of sequential spraying of polyvinyl alcohol with carbon quantum dots (PVA@CDs) aqueous suspension and SiO2 aqueous suspension is proposed to rapidly prepare multicolor dual-mode anti-counterfeiting labels. With the optimization of the concentration (15%) of colloidal microspheres in the SiO2 aqueous suspension as well as the spraying process parameters (spray distance of 10 cm, spray duration of 3 s, and assembly temperature of 20 °C), different-sized SiO2 microspheres (168 nm, 228 nm, and 263 nm) were utilized to rapidly assemble red, green, and blue photonic crystals. Furthermore, the tunable fluorescence emission of carbon quantum dots endows the labels with yellow, green, and blue fluorescence. The constructed dual-mode labeling was used to develop an anti-counterfeiting code with dual-channel information storage capabilities and also to create dual-mode multicolor anti-counterfeiting labels on various packaging substrates. This work provides a novel solution for anti-counterfeiting packaging and information storage.

RESUMEN

Vacancy-ordered perovskites and derivatives represent an important subclass of hybrid metal halides with promise in applications including light emitting devices and photovoltaics. Understanding the vacancy-property relationship is crucial for designing related task-specific materials, yet research in this field remains sporadic. For the first time, we use the Connolly surface to quantitatively calculate the volume of vacancy (V□, □ = vacancy) in vacancy-ordered double perovskite derivatives (VDPDs). A relationship between void fraction and the structure, photoluminescent properties and humidity stability was established based on zero-dimensional (0-D) [N(alkyl)4]2Sb□Cl5□'-type VDPDs. Compared with the more commonly studied A2M(IV)X6□-type double perovskite (A = cation, M = metal ion, X = halide), [N(alkyl)4]2Sb□Cl5□' features double vacancy sites. Our results demonstrate an inverse relationship between the photoluminescent quantum yield and V□ in 0-D VDPDs. Additionally, structural transformation from A2SbCl5 to A3Sb2Cl9 was first reported, during which the novel 'gate-opening' gas adsorption phenomenon was observed in VDPDs for the first time, as evidenced by 'S'-shaped sorption isotherms for water vapor, indicating a cation-controlled water-vapor response behavior. A mixed-cation strategy was developed to modulate the humidity stability of VDPDs. Characterized by controllable water-responsive behavior and unique 'on-off-on' luminescent switching, A2M(III)□X5□'-type materials show great promise for multi-level information anti-counterfeiting applications.

RESUMEN

Carbon quantum dots are a new type of fluorescent carbon-based nanomaterials, and their excellent properties have provoked a strong research interest. Herein, blue-fluorescent carbon quantum dots (k-CQDs) were successfully synthesized by a simple one-step hydrothermal method using chitosan and ethylenediaminetetraacetic acid as precursors. It was found that Fe3+ could quench the fluorescence of k-CQDs by a dynamic quenching mechanism that increased the positive charge in solution. Due to ascorbic acid (AA) can reduce Fe3+ to Fe2+, the positive charge in solution was reduced and the fluorescence of k-CQDs was restored. Based on the mechanism of the fluorescence "on-off-on", k-CQDs were used for the detection of Fe3+ and AA with strong antijamming capability. The LOD for Fe3+ concentrations in the ranges of 0 to 30 µM and 30 to 100 µM were 0.3 µM and 0.76 µM, respectively. The LOD for AA concentrations in the ranges of 0 to 82.5 µM and 82.5 to 172.5 µM were 3.93 µM and 1.63 µM, respectively. Spiking recoveries of Fe3+ in tap water, AA in orange juice and tomato juice were 87.93 ∼ 101.13%, 86.77 ∼ 105.15% and 86.43 ∼ 103.80%, respectively. Meanwhile, k-CQDs also showed good potential for anti-counterfeiting encryption.

RESUMEN

Perovskites have gained widespread attention across various fields such as photovoltaics, displays, and imaging. Despite their promising applications, achieving precise and high-quality patterning of perovskite films remains a challenge. In this study, femtosecond laser direct writing technology is utilized to achieve rapid and highly precise micro/nanofabrication on perovskites. The study successfully fabricates multiple structured and emission-tunable perovskite patterns composed of A2(FA)n-1PbnX3n+1 (A represents a series of long-chain amine cations, and X = Cl, Br, I), encompassing 2D, quasi-2D, and 3D structures. The study delves into the intricate interplay between fabrication technology and the growth of multi-dimensional perovskites: higher repetition rates, coupled with appropriate laser power, prove more conducive to perovskite growth. By employing precise halogen element design, the simultaneous generation of two distinct color quick-response (QR) code patterns is achieved through one-step laser processing. These mirrored QR codes offer a novel approach to anti-counterfeiting. To further enhance anti-counterfeiting capabilities, artificial intelligence (AI)-based methods are introduced for recognizing patterned perovskite anti-counterfeiting labels. The combination of deep learning algorithms and a non-deterministic manufacturing process provides a convenient means of identification and creates unclonable features. This integration of materials science, laser fabrication, and AI offers innovative solutions for the future of security features.

RESUMEN

Doping in semiconductor quantum dots (QDs) using optically active dopants tailors their optical, electronic, and magnetic properties beyond what is achieved by controlling size, shape, and composition. Herein, we synergistically modulated the optical properties of eco-friendly ZnInSe2/ZnSe core/shell QDs by incorporating Cu-doping and Mn-alloying into their core and shell to investigate their use in anti-counterfeiting and information encryption. The engineered "Cu:ZnInSe2/Mn:ZnSe" core/shell QDs exhibit an intense bright orange photoluminescence (PL) emission centered at 606 nm, with better color purity than controlled QDs. The average PL lifetime is significantly prolonged to 201 ns, making it relevant for complex encryption and anti-counterfeiting. PL studies reveal that in Cu:ZnInSe2/Mn:ZnSe, the photophysical emission arises from the Cu state via radiative transition from the Mn 4T1 state. Integration of Cu:ZnInSe2/Mn:ZnSe core/shell QDs into poly(methyl methacrylate) serves as versatile smart concealed luminescent inks for both writing and printing patterns. The features of these printed patterns using Cu:ZnInSe2/Mn:ZnSe core/shell QDs persisted after 10 weeks of water-soaking and retained 70% of their PL emission intensity at 170 °C, demonstrating excellent thermal stability. This work provides an efficient approach to enhance both the emission and stability of eco-friendly QDs via dopant engineering for fluorescence anti-counterfeiting applications.