RESUMEN

Cinchona alkaloid-derived sulfonamides and ester dimers containing chiral hyperbranched polymers have been successfully synthesized and applied as catalysts in asymmetric reactions. Several hyperbranched polymers derived from cinchona alkaloids, incorporating sulfonamides and esters, were synthesized through Mizoroki-Heck coupling polymerization. These polymers were subsequently applied in enantioselective Michael addition reactions. As the prepared polymers are not soluble in frequently used organic solvents, they act as efficient catalysts in the enantioselective reaction of ß-ketoesters to nitroolefins, achieving up to 99% enantioselectivity with good yields. The insoluble property allows them to better satisfy "green chemistry" requirements and be used several times without losing the enantioselectivity.

RESUMEN

We performed a hierarchical ab initio benchmark study of the gas-phase radical addition reactions of X• + C2H2 and X• + C2H4 (X•= CH3•, NH2•, OH•, SH•). The hierarchical series of ab initio methods (HF, MP2, CCSD, CCSD(T)) were paired with a hierarchal series of Dunning basis sets with and without diffuse functions ((aug)-cc-pVDZ, (aug)-cc-pVTZ, (aug)-cc-pVQZ). The HF ground-state wavefunctions were transformed into quasi-restricted orbital (QRO) reference wavefunctions to address spin contamination. Following extrapolation to the CBS limit, the energies from our highest- QRO-CCSD(T)/CBS+ level converged within 0.0-3.4 kcal mol-1 and 0.0-1.0 kcal mol-1 concerning the ab initio method and basis set, respectively. Our QRO-CCSD(T)/CBS+ reference data was used to evaluate the performance of 98 density functional theory (DFT) approximations. The MAE of the best functionals for reaction barriers and energies were: OLYP (1.9 kcal mol-1), BMK (1.0 kcal mol-1), M06-2X (0.9 kcal mol-1), MN12-SX (0.8 kcal mol-1) and CAM-B3LYP (0.8 kcal mol-1). These functionals also accurately reproduce key geometrical parameters of the stationary points within an average 2% deviation from the reference QRO-CCSD(T)/CBS+ level.

RESUMEN

This review covers the literature information on the chemistry of hydrazonoyl halides with different substrates to give heterocyclic compounds. From the foregoing survey, it seems this provides a useful and convenient strategy for the synthesis of numerous heterocyclic derivatives. The subject of such reactions is still ongoing and undoubtedly will provide new fused functionalized compounds of both industrial and biological interest. A literature survey revealed that a great deal of interest has been focused on the synthesis of functionalized heterocyclic compounds due to their wide range of biological activities, such as contact dermatitis, anthelmintic, antiviral, antimicrobial, herbicidal, and anti-cancer. On the other hand, hydrazonoyl halides are interesting synthons for valuable bioactive heterocyclic compounds. The reaction of hydrazonoyl halides with various types of substrates gave a huge number of different heterocyclic systems. In this review, we collected all reactions of hydrazonoyl halides with different moieties and classified them as aryl diazo of monoheterocycles, aryldiazo of 5,5-bis-heterocycles, aryldiazo of 5,6-bis-heterocycles, aryldiazo of 6,6-bis-heterocycles, aryldiazo of 5,5,6-tri-heterocycles, aryldiazo of 5,6,6-tri-heterocycles, aryldiazo of 6,6,6-tri-heterocycles, hetero annulation of bisheterocycles, hetero annulation of tri-heterocycles, hetero-annulation of tetra-heterocycles, synthesis of spiro-heterocycles, heterocyclic ring transformations, and 1,3-dipolar cycloaddition reactions catalyzed by transition metals using hydrazonoyl halides as substrates.Most reaction types have been successfully applied and used in the production of biologically active compounds. The aim of the present survey is to consider in the reader the opportunity interactions and biological activities of hydrazonoyl halides. The information of several artificial paths and varied physics-chemical factors of such heterocycles made a special consideration of chemists in different fields to yield a combinatorial library and carry out thorough efforts in the search for hydrazonoyl halides.

RESUMEN

Superhydrophobic materials used for oil-water separation have received wide attention. However, the simple and low-cost strategy for making durable superhydrophobic materials remains a major challenge. Here, this work reports that stable and durable superhydrophobic cotton fabrics can be prepared using a simple two-step impregnation process. Silica nanoparticles are surface modified by hydrolysis condensation of 3-aminopropyltrimethoxysilane (APTMS). 1,4-conjugate addition reaction between the acrylic group of cross-linking agent pentaerythritol triacrylate (PETA) and the amino group of octadecylamine (ODA) forms a covalent cross-linked rough network structure. The long hydrophobic chain of ODA makes the cotton fabric exhibit excellent superhydrophobic properties, and the water contact angle (WCA) of the fabric surface reaches 158°. The modified cotton fabric has good physical and chemical stability, self-cleaning, and anti-fouling. At the same time, the modified fabric shows excellent oil/water separation efficiency (98.16% after 20 cycles) and ultrahigh separation flux (15413.63 L m-2 h-1) due to its superhydrophobicity, superoleophilicity, and inherent porous structure. The method provides a broad prospect in the future diversification applications of oil/water separation and oil spill cleaning.

RESUMEN

Due to the chemical stability of graphene, synthesis of carboxylated graphene still remains challenging during the electrochemical exfoliation of graphite. In this work, a spatially confined radical addition reaction which occurs in the sub-nanometer scaled interlayers of the expanded graphene sheets for the electrochemical synthesis of highly stable carboxylated graphene is reported. Here, formate anions act as both intercalation ions and co-reactant acid for the confinement of electro-generated carboxylic radical (●COOH) in the sub-nanometer scaled interlayers, which facilitates the radical addition reaction on graphene sheets. The controllable carboxylation of graphene is realized by tuning the concentration of formate anions in the electrolyte solution. The high crystallinity of the obtained product indicates the occurrence of spatially confined ●COOH addition reaction between the sub-nanometer interlayers of expanded graphite. In addition, the carboxylated graphene have been used for water desalination and hydrogen/oxygen reduction reaction. Therefore, this work provides a new method for the in situ preparation of functionalized graphene through the electrolysis and its applications in water desalination and hydrogen/oxygen reduction reactions.

RESUMEN

Mimicking biological skin enabling direct, intelligent interaction between users and devices, multimodal sensing with optical/electrical (OE) output signals is urgently required. Owing to this, this work aims to logically design a stretchable OE biomimetic skin (OE skin), which can sensitively sense complex external stimuli of pressure, strain, temperature, and localization. The OE skin consists of elastic thin polymer-stabilized cholesteric liquid crystal films, an ion-conductive hydrogel layer, and an elastic protective membrane formed with thin polydimethylsiloxane. The as-designed OE skin exhibits customizable structural color on demand, good thermochromism, and excellent mechanochromism, with the ability to extend the full visible spectrum, a good linearity of over 0.99, fast response speed of 93 ms, and wide temperature range of 119 °C. In addition, the conduction resistance variation of ion-conductive hydrogel exhibits excellent sensing capabilities under pressure, stretch, and temperature, endowing a good linearity of 0.99998 (stretching from 0 to 150%) and high thermal sensitivity of 0.86% per °C. Such an outstanding OE skin provides design concepts for the development of multifunctional biomimetic skin used in human-machine interaction and can find wide applications in intelligent wearable devices and human-machine interactions.

RESUMEN

A benzoxazole-coumarin-based probe BOC, was synthesized and validated for its anion sensing ability and found to be effective in recognizing cyanide ions. Upon addition of cyanide, a spontaneous color change was observed that was visible to the naked eye. The sensitization process takes place with nucleophilic addition, and the cyanide ion added to the probe disrupts the intra molecular charge transfer transition (ICT) between the donor and acceptor units, causing the pink colored probe to become yellow. Ultraviolet and fluorescence methods were applied to measure the detection limits of probes with added cyanide ions, which were found to be 3.47 µM and 2.48 nM. The stoichiometry of the probe with the cyanide ion was determined by the Job's method, NMR titration, and mass spectrometry and was found to be in a 1:1 ratio. The results obtained from the visual and UV-visible spectral studies are justified by theoretical calculations. The cyanide-loaded probe induced visual changes, which enabled the development of a test strip for field application, and the prepared strip can be used to detect the ppm level of cyanide in water samples. The developed probe, BOC, can be used to detect cyanide ions in various water samples.

RESUMEN

Developing an additive to effectively regulate the perovskite crystallization kinetics for the optimized optoelectronic properties of perovskite film plays a vital role in obtaining high efficiency and stable perovskite solar cells (PSCs). Herein, a new additive is designed and directly synthesized in perovskite precursor solution by utilizing an addition reaction between but-3-yn-1-amine hydrochloride (BAH) and formamidinium iodide. It is found that its product may control the intermediate precursor phase for regulating perovskite nucleation, leading to advantageous 2D perovskite to induce growth of perovskite along the preferred [001] orientation with not only released lattice strain but also strong interaction with perovskite to passivate its surface defects. By taking advantage of the above synergistic effects, the optimized PSC delivers an efficiency of 25.19% and a high open-circuit voltage (VOC) of 1.22 V. Additionally, the devices demonstrate good stability, remaining over 90% of their initial efficiencies under ambient atmosphere conditions for 60 days, high temperature of 85 °C for 200 h, or maximum power point tracking for 500 h.

RESUMEN

Liquid crystalline blue phase (BP) with 3D cubic nanostructure has attracted much interest in the fields of photonic crystals due to their unique optical properties and the ability to control the flow of light. However, there remains a challenge for simultaneously achieving self-assembly and mechanochromic response of soft 3D cubic nanostructures. Herein, a scalable strategy for the preparation of soft 3D cubic nanostructured films using oligomerization of the Michael addition reaction, which can induce the assembly of double-twisted cylinders for collective replication, remodeling, recombination, and growth, with a phase transition from BPII to BPI, and to chiral nematic phase, is presented. The prepared BP patterns can be obtained by Michael addition oligomerization reaction and composite mask photopolymerization, which present distinct mechanochromic sensitive due to patterns derived from different BP state, and the pattern can be reversibly erased and recurred by mechanical force and temperature. The average domain size of BPII prepared using this strategy can achieve 96 µm, which is 2.5 times larger than that obtained using the conventional cooling approach. This work provides new insights into the self-assembly and selective chemochromism of functional materials and devices.

RESUMEN

Phenyl ditelluride (PDTe) as a cathode material for rechargeable batteries has a low specific capacity (130.9 mAh g-1) due to limited active sites (two). To increase its capacity, additional active species need to be added to the structure of PDTe, like sulfur. Here, phenyl tellurosulfide (PDTeS) and phenyl tellurodisulfide (PDTeS2) can be formed via addition reactions and have specific capacities of 242.8 and 339.6 mAh g-1, respectively. The products are characterized by mass spectrometry and Raman spectroscopy. The Li/PDTeSn (n = 1-2) cells exhibit high material utilization (>85%) and unique redox mechanism. They can be cycled stably for more than 1000 cycles at an areal mass loading of 1.1 mg cm-2 and maintain capacity retentions of >72% after 100 cycles with PDTeSn loading of ∼6 mg cm-2. Moreover, the Li/PDTeS2 cell achieves a specific energy of up to 695 Wh kg-1 even when the electrolyte/PDTeS2 ratio is as low as 2.5 µL mg-1. The successful synthesis and application of PDTeSn prove that they are promising cathode materials for rechargeable lithium batteries.

RESUMEN

A series of chiral ligands were synthesized using chloramphenicol base as starting materials. These ligands were applied to the asymmetric catalytic reactions of terminal alkynes with aldehydes to obtain a propargyl alcohol product in high yield (80-94%) with excellent enantioselectivities (82-96%).

RESUMEN

Red Monascus pigments (MPs) are a large group of polyketides from the fungus Monascus which have been widely used as food colorants. In this study, a variety of red MPs congeners were prepared to explore promising water-soluble candidates for application in liquid food formulations. The results showed that by combining the two-stage, low-pH fermentation strategy with a downstream purification step of fractional crystallization, precursors of red MPs, namely monascorubrin and rubropunctatin, were obtained with a purity of 91.9%. Then, via the azaphilic addition reaction, 18 types of red MPs congeners carrying different amino acid moieties (MPs-aa) were semi-synthesized. Compared to rubropunctamine and monascorubramine, the water solubility, pH and thermal stability of MPs-aa were improved greatly. MPs-His, MPs-Phe, MPs-Tyr and MPs-Trp were identified to be the most resistant to pasteurization. These findings provide water-soluble red MPs candidates with high thermal stability and an attractive approach for their large scale production.

RESUMEN

Promiscuous enzymes have shown their synthetic abilities in generating various organic compounds with high selectively and efficiency under mild conditions. Therefore, the design and development of conditions to raise promiscuity to the enzymes have been under the spotlight in recent years. Flavin reductase, that reduces flavins by using NADH as a cofactor, has not been studied in promiscuous reactions. In the present study, it was aimed to develop a catalytic promiscuous activity in the recombinant E.coli flavin reductase by removing its cofactor. The flavin reductase demonstrated a promiscuous activity for Knoevenagel condensation and Michael addition reactions individually. The cofactor-independent promiscuous activity of the flavin reductase was further enhanced by altering the reaction conditions to proceed a Knoevenagel-Michael addition cascade for tetraketone synthesis. Yet, the presence of the cofactor blocked the promiscuous Knoevenagel condensation, Michael addition, and therefore the cascade reaction, demonstrating that the removal of NADH was pivotal in inducing the promiscuous activity. Furthermore, molecular docking and MD simulations were performed to obtain more structural and mechanistic details of the transformation. The computational studies identified the most likely catalytic sites of the flavin reductase in the reaction. Additionally, a truncated variant of the enzyme that lacked 28 residues from the C-terminus displayed comparable activity to the wild-type enzyme, indicating the robustness of the enzyme in performing the cascade reaction. In brief, the cofactor-elimination method presented in this work could be considered as a straightforward and economical approach for inducing enzyme promiscuity in promoting organic transformations.

RESUMEN

As an important cancer therapeutic target, extracellular signal-regulated kinases (ERK) are involved in triggering various cellular responses in tumors. Regulation of the ERK signaling pathway by the small molecular inhibitors is highly desired for the sake of cancer therapy. In contrast to the routine inhibitors targeting ERKs through long-range non-bonding interactions, Ponatinib, a covalent inhibitor to ERK2 with a macrocyclic structure characterized by the α,ß-C=C unsaturated ketone, can form the stable -C(S)-C(H)-type complex via the four-center barrier due to the nucleophilic addition reaction of the thiol group of the Cys166 residue of ERK2 with the C=C double bond of Ponatinib with reaction free-energy barrier of 47.2 kcal/mol. Reaction mechanisms for the covalent binding were calculated using QM/MM methods and molecular dynamics simulations. The interaction modes and the corresponding binding free energies were obtained for the non-covalent and covalent complexation. The binding free energies of the non-covalent and covalent inhibitions are 14.8 kcal/mol and 33.4 kcal/mol, respectively. The mechanistic study stimulated a rational design on the modified Ponatinib structure by substituting the C=C bond with the C=N bond. It was demonstrated that the new compound exhibits better inhibition activity toward ERK2 in term of both thermodynamic and kinetic aspects through the covalent binding with a lower reaction free-energy barrier of 23.1 kcal/mol. The present theoretical work sheds new light on the development of the covalent inhibitors for the regulation of ERKs.

Asunto(s)

RESUMEN

The inherent highly hydrophilic feature of cellulose-based paper hinders its application in many fields. Herein, a cellulose-based hydrophobic paper was fabricated based on surface chemical modification. Firstly, the hydrophobic acrylate components were bonded to the cellulose acetoacetate (CAA) fibers to obtain CAA graft acrylate (CAA-X) fibers through Michael addition reaction. Subsequently, CAA-X fibers were processed into paper via wet papermaking technology. The resulting paper exhibited good hydrophobic performance (water contact angle was up to 135°) with an air permeability of 24.8 µm/Pa·s. The hydrophobicity of paper was very stable and remained even after treating with different solvents. Moreover, the hydrophobic properties of this paper could be adjusted by changing the type of acrylate component. It should be noted that the surface modification strategy has no obvious effects on the whiteness (79.8%), writing, and printing properties of the cellulose fibers. Thus, it is a simple, benign, and efficient strategy for the construction of cellulose-based hydrophobic paper, which has great potential to be used in paper tableware, oil-water separation, watercolor protection, and food packaging fields.

Asunto(s)

RESUMEN

An efficient metal-free approach for site selective C-N coupling reaction of benzo[d]isoxazole and 2H-chromene derivatives has been designed and developed against AchE. This nitrogen containing organo-base promoted methodology, which is both practical and environmentally friendly, provides an easy and suitable pathway for synthesizing Benzisoxazole-Chromene (BC) possessing poly heteroaryl moieties. The synthesized BC derivatives 4 a-n was docked into the active sites of AChE to obtain more perception into the binding modes of the compounds. Out of them, compound 4 a and 4 l displayed potent activity and high selectivity against the AChE inhibition. Final docking results indicates that compound 4 l showed the lowest binding energy of -11.2260 kcal/mol with AChE. The synthesized BC analogs would be potential candidates for promoting suitable studies in medicinal chemistry research.

Asunto(s)

RESUMEN

Injectable hydrogels show great promise in developing novel regenerative medicine solutions and present advantages for minimally invasive applications. Hydrogels based on extracellular matrix components, such as collagen, have the benefits of cell adhesiveness, biocompatibility, and degradability by enzymes. However, to date, reported collagen hydrogels possess severe shortcomings, such as nonbiocompatible cross-linking chemistry, significant swelling, limited range of mechanical properties, or gelation kinetics unsuitable for in vivo injection. To solve these issues, we report the design and characterization of an injectable collagen hydrogel based on covalently modified acetyl thiol collagen cross-linked using thiol-maleimide click chemistry. The hydrogel is injectable for up to 72 h after preparation, shows no noticeable swelling, is transparent, can be molded in situ, and retains its shape in solution for at least one year. Notably, the hydrogel mechanical properties can be fine-tuned by simply adjusting the reactant stoichiometries, which to date was only reported for synthetic polymer hydrogels. The biocompatibility of the hydrogel is demonstrated in vitro using human corneal epithelial cells, which maintain viability and proliferation on the hydrogels for at least seven days. Furthermore, the developed hydrogel showed an adhesion strength on soft tissues similar to fibrin glue. Additionally, the developed hydrogel can be used as a sealant for repairing corneal perforations and can potentially alleviate the off-label use of cyanoacrylate tissue adhesive for repairing corneal perforations. Taken together, these characteristics show the potential of the thiol collagen hydrogel for future use as a prefabricated implant, injectable filler, or as sealant for corneal repair and regeneration.

Asunto(s)

RESUMEN

This research explored the effects of oxidative modification caused by different malondialdehyde (MDA) concentrations on rabbit meat myofibrillar protein (MP) structural characteristics and the interactions between MDA and MP. The fluorescence intensity of MDA-MP adducts, and surface hydrophobicity increased, whereas the intrinsic fluorescence intensity and free-amine content of MPs decreased as MDA concentration and incubation time increased. The carbonyl content was 2.06 nmol/mg for native MPs, while the carbonyl contents increased to 5.17, 5.57, 7.01, 11.37, 13.78, and 23.24 nmol/mg for MP treated with 0.25 to 8 mM MDA, respectively. When the MP was treated with 0.25 mM MDA, the sulfhydryl content and the α-helix content decreased to 43.78 nmol/mg and 38.46%, while when MDA concentration increased to 8 mM, the contents for sulfhydryl and α-helix decreased to 25.70 nmol/mg and 15.32%. Furthermore, the denaturation temperature and ΔH decreased with the increase in MDA concentration, and the peaks disappeared when the MDA concentration reached 8 mM. Those results indicate MDA modification resulted in structural destruction, thermal stability reduction, and protein aggregation. Besides, the first-order kinetics and Stern-Volmer equation fitting results imply that the quenching mechanism of MP by MDA may be mainly driven by dynamic quenching.

RESUMEN

CONTEXT: Tetrylenoids, R2EXM (E = Si, Ge, and Sn; X = electronegative group; M = alkali metal), have electrophilic and nucleophilic properties just like carbenoid. As the products of carbenoid compounds with olefins, the cyclopropane fraction has been found to be biologically active in many natural and artificial compounds. Can carbenoid analogues of stannylenoid facilitate similar cyclopropanation reactions? METHODS: Addition reaction of the stannylenoid compound H2SnLiF with ethylene was investigated using density function theory (DFT) at the M062X/def2-TZVP level. The single-point energy calculations were performed on the basis of QCISD/def2-TZVP level. RESULTS: Two possible pathways were found for the addition reaction of H2SnLiF (R1) with ethylene (R2). The most favorable path is the two successive reactions of H2SnLiF and ethylene through the ternary ring product c-H2Sn(CH2)2 (P1) and then the formation of the five-membered ring product (P2). Solvation-related studies have shown that addition reactions are more likely to occur in the presence of THF solvents. This work provides theoretical support for the reactions of stannylenoid with olefins.

RESUMEN

The formation and crystal structure of a zigzag network held together by I⋯N halogen bonds is reported. In particular, the halogen-bond donor is 1,3-di-iodo-perchloro-benzene (C6I2Cl4 ) while the acceptor is the photoproduct rtct-tetra-kis-(pyridin-4-yl)cyclo-butane (TPCB). Curiously, within the resulting co-crystal (C6I2Cl4 )·(TPCB), the photoproduct accepts only two halogen bonds between neighbouring 4-pyridyl rings and as a result behaves as a bent two-connected node rather than the expected four-connected centre. In addition, the photoproduct, TPCB, is also found to engage in C-H⋯N hydrogen bonds, forming an extended zigzag chain.