RESUMEN
Zn-air battery (ZAB)-driven water splitting holds great promise as a next-generation energy conversion technology, but its large overpotential, low activity, and poor stability for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) remain obstacles. Here, a trifunctional graphene-sandwiched, heterojunction-embedded layered lattice (G-SHELL) electrocatalyst offering a solution to these challenges are reported. Its hollow core-layered shell morphology promotes ion transport to Co3S4 for OER and graphene-sandwiched MoS2 for ORR/HER, while its heterojunction-induced internal electric fields facilitate electron migration. The structural characteristics of G-SHELL are thoroughly investigated using X-ray absorption spectroscopy. Additionally, atomic-resolution transmission electron microscopy (TEM) images align well with the DFT-relaxed structures and simulated TEM images, further confirming its structure. It exhibits an approximately threefold smaller ORR charge transfer resistance than Pt/C, a lower OER overpotential and Tafel slope than RuO2, and excellent HER overpotential and Tafel slope, while outlasting noble metals in terms of durability. Ex situ X-ray photoelectron spectroscopy analysis under varying potentials by examining the peak shifts and ratios (Co2+/Co3+ and Mo4+/Mo6+) elucidates electrocatalytic reaction mechanisms. Furthermore, the ZAB with G-SHELL outperforms Pt/C+RuO2 in terms of energy density (797 Wh kg-1) and peak power density (275.8 mW cm-2), realizing the ZAB-driven water splitting.
RESUMEN
Developing efficient bifunctional oxygen electrocatalysts is crucial for enhancing the performance of rechargeable Zn-air batteries (ZABs). In this study, cobalt/cobalt oxides embedded in N-doped carbon nanofibers (Co/CoOx/NCNFs) were synthesized through a combination of electrospinning and annealing processes. The resulting Co/CoOx/NCNFs catalysts feature abundant CoNx and CoOx active species, leveraging the large specific surface area of nanofibers to facilitate oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The optimized Co/CoOx/NCNFs-0.1 achieved a half-wave potential (vs. RHE) of 0.82 V and required only 429 mV to reach 10 mA cm⻲ in a typical three-electrode system with 0.1 M KOH using an electrochemical workstation equipped with a pine instruments rotator, outperforming the Pt/C+RuO2. The assembled ZABs exhibited high specific capacity (771 mAh gZn-1), substantial power density (981.6 mWh gZn-1), and long-term stability (>325 h). In situ Raman spectroscopy confirmed that the electrocatalytic processes involve the redox activity of Co (II and III) species derived from abundant CoNx and CoOx, elaborating the origin of the catalysts' exceptional oxygen electrocatalysis performance. This work not only presents a straightforward and effective approach for producing bifunctional oxygen electrocatalysts in ZABs but also sheds light on the catalytic mechanisms underlying ORR and OER for CoNx/CoOx-based oxygen electrocatalysts.
RESUMEN
The surface engineering of electrocatalysts is one of the promising strategies to increase the intrinsic activity of electrocatalysts. It generates anion/cation vacancy defects and increases the electrochemically active surface area. We describe the surface engineering of Ni2P to favorably tune the bifunctional oxygen electrocatalytic activity and the development of a rechargeable zinc-air battery (ZAB). Ni2P encapsulated with N and P-dual doped carbon (Ni2P@NPC) is synthesized using a single-source precursor complex tris-(2,2'-bipyridine)nickel(II) bis(hexafluorophosphate). The surface engineering of the as-synthesized Ni2P@NPC is achieved by the controlled acid treatment at room temperature. The surface engineering removes carbon debris and opens the pores, exfoliates the encapsulating carbon layer, increases the P-vacancy in the crystal lattice, and boosts the electrochemically active surface area. The surface-engineered catalyst exhibits enhanced bifunctional activity towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The electrocatalytically active sites of engineered catalysts are highly accessible for facilitated electron transfer kinetics. P-vacancy favors the facile formation of defect-rich OER active metal oxyhydroxide species. The rechargeable ZAB based on the engineered catalyst delivers a specific capacity of 770.25 mA h gZn-1, energy density of 692 Wh kgZn-1, and excellent charge-discharge cycling performance with negligible voltaic efficiency loss (0.6 %) after 100 h.
RESUMEN
Overcoming the trade-off between the graphitization of the carbon substrate and enhanced electronic metal-support interaction (EMSI) and intrinsic activity of Pt-C catalysts remains a major challenge for ensuring the durable operation of energy conversion devices. This article presents a hybrid catalyst consisting of PtFe nanoparticles and single Pt and Fe atoms supported on N-doped carbon (PtFeNPs@PtFeSAs-N-C), which exhibits improved activities in hydrogen evolution and oxygen reduction reactions (HER and ORR, respectively) and has excellent durability owing to the high graphitization, rich edge defects, and porosity of the carbon in PtFeNPs@PtFeSAs-N-C, as well as strong EMSI between the PtFe nanoparticles and edge-defective carbon embedded with Pt and Fe atoms. According to theoretical calculations, the strong EMSI optimizes the H* adsorption-desorption and facilitates the adsorption OOH*, accelerating the HER and ORR processes. A novel flow seawater-Al/acid hybrid fuel cell using the PtFeNPs@PtFeSAs-N-C cathode can serve as a high-efficiency energy conversion device that delivers a high power density of 109.5 mW cm-2 while producing H2 at a significantly high rate of 271.6 L m-2 h-1. Moreover, PtFeNPs@PtFeSAs-N-C exhibits a remarkable performance (high power density of 298.0 mW cm-2 and long-term durability of 1000 h) in a flow Zn-air battery.
RESUMEN
The active sites of inexpensive transition metal electrocatalysts are sparse and singular, thus high-entropy alloys composed of non-precious metals have attracted considerable attention due to their multi-component synergistic effects. However, the facile synthesis of high-entropy alloy composites remains a challenge. Herein, we report a "one-stone, two-birds" method utilizing zinc (Zn)-rich metal-organic frameworks as precursors, by virtue of the low boiling point of Zn (907 °C) and its high volatility in alloys, high-entropy alloy carbon nanocomposite with a layered pore structure was ultimately synthesized. The experimental results demonstrate that the volatilization of zinc can prevent metal agglomeration and contribute to the formation of uniformly dispersed high-entropy alloy nanoparticles at slower pyrolysis and cooling rates. Simultaneously, the volatilization of Zn plays a crucial role in creating the hierarchical porous structure. Compared to the zinc-free HEA/NC-1, the HEA/NC-5 derived from the precursor containing 0.8 Zn exhibit massive micropores and mesopores. The resulting nanocomposites represent a synergistic effect between highly dispersed metal catalytic centers and hierarchical adsorption sites, thus achieving excellent electrocatalytic oxygen reduction performance with low catalyst loading compared to commercial Pt/C. This convenient zinc-rich precursor method can be extended to the production of more high-entropy alloys and various application fields.
RESUMEN
Defect engineering is a key chemical tool to modulate the electronic structure and reactivity of nanostructured catalysts. Here, it is reported how targeted introduction of defect sites in a 2D palladium metallene nanostructure results in a highly active catalyst for the alkaline oxygen reduction reaction (ORR). A defect-rich WOx and MoOx modified Pd metallene (denoted: D-Pd M) is synthesized by a facile and scalable approach. Detailed structural analyses reveal the presence of three distinct atomic-level defects, that are pores, concave surfaces, and surface-anchored individual WOx and MoOx sites. Mechanistic studies reveal that these defects result in excellent catalytic ORR activity (half-wave potential 0.93 V vs. RHE, mass activity 1.3 A mgPd-1 at 0.9 V vs. RHE), outperforming the commercial references Pt/C and Pd/C by factors of ≈7 and ≈4, respectively. The practical usage of the compound is demonstrated by integration into a custom-built Zn-air battery. At low D-Pd M loading (26 µgPd cm-2), the system achieves high specific capacity (809 mAh gZn -1) and shows excellent discharge potential stability. This study therefore provides a blueprint for the molecular design of defect sites in 2D metallene nanostructures for advanced energy technology applications.
RESUMEN
Developing reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for achieving high-performance rechargeable Zn-air batteries (ZABs). This study introduced an nitrogen-doped carbon confined with a semi-coherent Fe(PO3)2-Co2P2O7 heterojunction for bifunctional oxygen electrocatalysis. This nanocomposite yielded an ORR half-wave potential of 0.908 V and an OER overpotential of 291 mV at 10 mA/cm2. ZABs incorporating this catalyst yielded impressive performance, including a peak power density of 203 mW/cm2, a specific capacity of 737 mAh/gZn, and promoted stability. Both experimental and theoretical simulations demonstrated that the unique electric field between Fe(PO3)2 and Co2P2O7 promoted efficient charge transport across the heterointerface. This interaction likely modulated the d-band center of the heterojunction, expedite the desorption of oxygen intermediates, thus improving oxygen catalysis and, consequently, ZAB performance. This work illustrates a significant design principle for creating efficient bifunctional catalysts in energy conversion technologies.
RESUMEN
Exploring precious metal-free bifunctional electrocatalysts for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is essential for the practical application of rechargeable Zn-air battery (ZAB). Herein, Ni-doped Co9S8 nanoparticles embedded in a defect-rich N, S co-doped carbon matrix (d-NixCo9-xS8@NSC) are synthesized via a facile pyrolysis and acid treatment process. The introduction of abundant defects in both the carbon matrix and metal sulfide provides numerous active sites and significantly enhances the electrocatalytic performances for both the ORR and OER. d-NixCo9-xS8@NSC exhibits a superior half-wave potential of 0.841 V vs. RHE for the ORR and delivers a low overpotential of 0.329 V at 10 mA cm-2 for the OER. Additionally, Zn-air secondary battery using d-NixCo9-xS8@NSC as the air cathode displays a higher specific capacity of 734 mAh gZn-1 and a peak power density of 148.03 mW cm-2 compared to those of state-of-the-art Pt/C-RuO2 (673 mAh gZn-1 and 136.9 mW cm-2, respectively). These findings underscore the potential of d-NixCo9-xS8@NSC as a high-performance electrocatalyst for secondary ZABs, offering new perspectives on the design of efficient noble metal-free electrocatalysts for future energy storage and conversion applications.
RESUMEN
Balancing the bicatalytic activities and stabilities between oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is a critical yet challenging task for exploring advanced rechargeable Zinc-air batteries (ZABs). Herein, a hybrid nanosheet catalyst with highly dispersed and densified metallic species is developed to boost the kinetics and stabilities of both ORR and OER concurrently. Through a progressive coordination and pyrolysis approach, we directly prepared highly conductive onion-like carbon (OLC) accommodating dense ORR-active CoNC species and enveloping high-loading OER-active CoNi-synergic structures within a porous lamellar architecture. The resultant CoNi/OLC nanosheet catalyst delivers better ORR and OER activities showcasing a smaller reversible oxygen electrode index (ΔE = Ej10 - E1/2) of 0.71 V, compared to state-of-the-art Pt/C-RuO2 catalysts (0.75 V), Co/amorphous carbon polyhedrons (0.80 V), NiO nanoparticles with higher Ni loading (1.00 V), and most CoNi-based bifunctional catalysts reported so far. The rechargeable ZAB assembled with the developed catalyst achieves a remarkable peak power density of 270.3 mW cm-2 (172 % of that achieved by Pt/C + RuO2) and ultrahigh cycling stability with a negligible increase in voltage gap after 800 h (110 mV increase after 200 h for a Pt/C + RuO2-based battery), standing the top level of those ever reported.
RESUMEN
In this paper, a novel, simple and mild soft template assisted strategy and further carbonization approach has been constructed to the size-tunable preparation of porous Cu-N-C/Surfactant catalysts successfully. Note that the pluronic F127 has a significant influence on the synthesis of porous Cu-N-C/F127 with the atomically dispersed Cu-N4 and adjacent Cu atomic clusters (ACs) than other surfactants owing to their particular non-ionic structure. By combining a series of experimental analysis and density functional theory (DFT) calculations, the synergistic effects between the adjacent Cu ACs and atomically dispersed Cu-N4 are favorable for manipulating the binding energy of O2 adsorption and intermediates desorption at the atomic interface of catalysts, resulting in an excellent electrocatalytic ORR performance with a faster kinetics for Cu-N-C/F127 than those of the Cu-N-C, Cu-N-C/CTAB, Cu-N-C/SDS, and comparable with the commercial Pt/C catalyst. This method not only provides a novel approach for synthesizing highly effective copper based single atom catalysts toward ORR, but also offers an in-depth understanding of the synergisms of adjacent ACs on the Cu single atoms (SAs) for highly effective electrocatalytic ORR and Zn-air Battery.
RESUMEN
Constructing dual-site catalysts consisting of atomically dispersed metal single atoms and metal atomic clusters (MACs) is a promising approach to further boost the catalytic activity for oxygen reduction reaction (ORR). Herein, a porous CoSA-AC@SNC featuring the coexistence of Co single-atom sites (CoN4) and S-coordinated Co atomic clusters (SCo6) in S, N co-doped carbon substrate is successfully synthesized by using porphyrinic metal-organic framework (Co-TPyP MOF) as the precursor. The introduction of the sulfur source creates abundant microstructural defects to anchor Co metal clusters, thus modulating the electronic structure of its surrounding carbon substrate. The synergistic effect between the two types of active sites and structural advantages, in turn, results in high ORR performance of CoSA-AC@SNC with half-wave potential (E1/2) of 0.86 V and Tafel slope of 50.17 mV dec-1. Density functional theory (DFT) calculations also support the synergistic effect between CoN4 and SCo6 by detailing the catalytic mechanism for the improved ORR performance. The as-fabricated Zn-air battery (ZAB) using CoSA-AC@SNC demonstrates impressive peak power density of 174.1 mW cm-2 and charge/discharge durability for 148 h. This work provides a facile synthesis route for dual-site catalysts and can be extended to the development of other efficient atomically dispersed metal-based electrocatalysts.
RESUMEN
To meet increasing requirement for innovative energy storage and conversion technology, it is urgent to prepare effective, affordable, and long-term stable oxygen electrocatalysts to replace precious metal-based counterparts. Herein, a two-step pyrolysis strategy is developed for controlled synthesis of Fe2O3 and Mn3O4 anchored on carbon nanotubes/nanosheets (Fe2O3-Mn3O4-CNTs/NSs). The typical catalyst has a high half-wave potential (E1/2 = 0.87 V) for oxygen reduction reaction (ORR), accompanied with a smaller overpotential (η10 = 290 mV) for oxygen evolution reaction (OER), showing substantial improvement in the ORR and OER performances. As well, density functional theory calculations are performed to illustrate the catalytic mechanism, where the in situ generated Fe2O3 directly correlates to the reduced energy barrier, rather than Mn3O4. The Fe2O3-Mn3O4-CNTs/NSs-based Zn-air battery exhibits a high-power density (153 mW cm-2) and satisfyingly long durability (1650 charge/discharge cycles/550 h). This work provides a new reference for preparation of highly reversible oxygen conversion catalysts.
RESUMEN
Double perovskite oxides are key players as electrocatalytic oxygen catalysts in alkaline media. In this study, we synthesized B-site doped NdBaCoaFe2-aO5+δ (a= 1.0, 1.4, 1.6, 1.8) electrocatalysts, systematically to probe their bifunctionality and assess their performance in zinc-air batteries as air cathodes. X-ray photoelectron spectroscopy analysis reveals a correlation between iron reduction and increased oxygen vacancy content, influencing electrocatalyst bifunctionality by lowering the work function. The electrocatalyst with highest cobalt content, NdBaCo1.8Fe0.2O5+δ exhibited a bifunctional index of 0.95 V, outperforming other synthesized electrocatalysts. Remarkably, NdBaCo1.8Fe0.2O5+δ, demonstrated facilitated charge transfer rate in oxygen evolution reaction with four-electron oxygen reduction reaction process. As an air cathode in a zinc-air battery, NdBaCo1.8Fe0.2O5+δ demonstrated superior performance characteristics, including maximum capacity of 428.27 mA h at 10 mA cm-2 discharge current density, highest peak power density of 64 mW cm-2, with an outstanding durability and stability. It exhibits lowest voltage gap change between charge and discharge even after 350 hours of cyclic operation with a rate capability of 87.14%.
RESUMEN
The development of green and environmentally friendly synthesis methods of electrocatalysts is a crucial aspect in decarbonizing energy generation. In this study, eco-friendly mechanochemical synthesis of perovskite metal oxide-carbon black composites is proposed using different conditions and additives such as KOH. Furthermore, the optimization of ball milling conditions, including time and rotational speed, is studied. The mechanochemical synthesis in solid-state conditions without additives produces electrocatalysts that exhibit the highest bifunctional electrochemical activity towards both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, this synthesis demonstrates a lower Environmental Impact Factor (E-factor), indicating its greener nature, and due to its simplicity, it has a great potential for scalability. The obtained bifunctional electrocatalysts have been tested in a rechargeable zinc-air battery (ZAB) for 22â h with similar performance compared to the commercial catalyst (Pt/C) at significantly lower cost. These promising findings are attributed to the enhanced interaction between the perovskite metal oxide and carbon material and the improved dispersion of the perovskite metal oxide on the carbon materials.
RESUMEN
To achieve high-performance Zn-air batteries (ZABs), the development of bifunctional air electrodes capable of efficiently mediating both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is imperative. In this study, we present an N-doped carbon hollow nanorod encapsulating a semi-coherent Co-Ni/Co6Mo6C heterojunction, tailored for reversible oxygen catalysis. This nanohybrid demonstrated an ORR half-wave potential of 0.907 V alongside an OER overpotential of η10 = 352 mV. When incorporated into ZABs, this catalyst exhibited extraordinary performance metrics, including a high-power density of 343.7 mW/cm2, a specific capacity of 681 mAh/gZn, and enhanced durability. The distinctive electric field within the heterojunction facilitated electron transfer across the semi-coherent interface during reversible oxygen electrocatalysis, enhancing the adsorption and release of active intermediates. Thus, this heightened ORR-OER catalytic efficiency culminated in superior ZABs performance. Our findings afford a pivotal design paradigm for the advancement of productive bifunctional catalysts within the field of energy conversion technologies.
RESUMEN
Modulating the energy barrier of reaction intermediates to surmount sluggish kinetics is an utterly intriguing strategy for amplifying the oxygen reduction reaction. Herein, a Cu3P/CoP hybrid is incorporated on hollow porous N-doped carbon nanospheres via dopamine self-polymerization and high-temperature treatment. The resultant Cu3P/CoP@NC showcases a favorable mass activity of 4.41 mA mg-1 and a kinetic current density of 2.38 mA cm-2. Strikingly, the catalyst endows the aqueous Zn-air battery (ZAB) with a large power density of 209.0 mW cm-2, superb cyclability over 317 h, and promising application prospects in flexible ZAB. Theoretical simulations reveal that Cu functions as a modulator to modify the free energy of intermediates and adsorbs the O2 on the Co sites, hence rushing the reaction kinetics. The open and hydrophilic hollow spherical mesoporous structure provides unimpeded channels for reactant diffusion and electrolyte penetration, whereas the exposed inner and outer surfaces can confer a plethora of accessible actives sites. This research establishes a feasible design concept to tune catalytic activity for non-noble metal materials by construction of a rational nanoframework.
RESUMEN
Multifunctional electrocatalysts are required for diverse clean energy-related technologies (e.g., electrochemical CO2 reduction reaction (CO2RR) and metal-air batteries). Herein, a nitrogen and fluorine co-doped carbon nanotube (NFCNT) is reported to simultaneously achieve multifunctional catalytic activities for CO2RR, oxygen reduction reaction (ORR), and oxygen evolution reaction (OER). Theoretical calculations reveal that the superior multifunctional catalytic activities of NFCNT are attributed to the synergistic effect of nitrogen and fluorine co-doping to induce charge redistribution and decrease the energy barrier of rate-determining step for different electrocatalytic reactions. Furthermore, the rechargeable Zn-air battery (ZAB) with NFCNT electrode delivers a high peak power density of 230 mW cm-2 and superior durability over 100 cycles, outperforming the ZAB with Pt/C+RuO2 based electrodes. More importantly, a self-driven CO2 electrolysis unit powered by the as-assembled ZABs is developed, which achieves 80% CO Faraday efficiency and 60% total energy efficiency. This work provides a new insight into the exploration of highly efficient multifunctional carbon-based electrocatalysts for novel energy-related applications.
RESUMEN
The development of low-cost, high-performance oxygen electrocatalysts is of great significance for energy conversion and storage. As a potential substitute for precious metal electrocatalysts, the construction of efficient and cost-effective oxygen electrocatalysts is conducive to promoting the widespread application of zinc-air batteries. Herein, CoxNiyMOF nanoparticles encapsulated within a carbon matrix were synthesized and employed as cathode catalysts in zinc-air batteries. Co0.5Ni0.5MOF exhibits superior oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance and durability. The zinc-air battery assembled with Co0.5Ni0.5MOF as the air cathode exhibits a maximum power density of 138.6 mW·cm-2. These improvements are mainly attributed to the optimized metal composition of the cobalt-nickel alloy, which increases the specific surface area of the material and optimizes its pore structure. Significantly, the optimization of the electronic structure and active sites within the material has led to amplified ORR/OER activity and better zinc-air battery performance. This study underscores the immense promise of Co0.5Ni0.5MOF catalysts as feasible substitutes for commercial Pt/C catalysts in zinc-air batteries.
RESUMEN
The single-atom Fe-N-C catalyst has shown great promise for the oxygen reduction reaction (ORR), yet the intrinsic activity is not satisfactory. There is a pressing need to gain a deeper understanding of the charge configuration of the Fe-N-C catalyst and to develop rational modulation strategies. Herein, we have prepared a single-atom Fe catalyst with the co-coordination of N and O (denoted as Fe-N/O-C) and adjacent defect, proposing a strategy to optimize the d-orbital spin-electron filling of Fe sites by fine-tuning the first coordination shell. The Fe-N/O-C exhibits significantly better ORR activity compared to its Fe-N-C counterpart and commercial Pt/C, with a much more positive half-wave potential (0.927â V) and higher kinetic current density. Moreover, using the Fe-N/O-C catalyst, the Zn-air battery and proton exchange membrane fuel cell achieve peak power densities of up to 490 and 1179â mW cm-2, respectively. Theoretical studies and in situ electrochemical Raman spectroscopy reveal that Fe-N/O-C undergoes charge redistribution and negative shifting of the d-band center compared to Fe-N-C, thus optimizing the adsorption free energy of ORR intermediates. This work demonstrates the feasibility of introducing an asymmetric first coordination shell for single-atom catalysts and provides a new optimization direction for their practical application.
RESUMEN
Introducing asymmetric elements and breaking the geometric symmetry of traditional metal-N4 site for boosting oxygen reduction reaction (ORR) are meaningful and challenging. Herein, the planar chlorination engineering of Fe-N4 site is first proposed for remarkably improving the ORR activity. The Fe-N4/CNCl catalyst with broken symmetry exhibits a half-wave potential (E1/2) of 0.917 V versus RHE, 49 and 72 mV higher than those of traditional Fe-N4/CN and commercial 20 wt% Pt/C catalysts. The Fe-N4/CNCl catalyst also has excellent stability for 25 000 cycles and good methanol tolerance ability. For Zn-air battery test, the Fe-N4/CNCl catalyst has the maximum power density of 228 mW cm-2 and outstanding stability during 150 h charge-discharge test, as the promising substitute of Pt-based catalysts in energy storage and conversion devices. The density functional theory calculation demonstrates that the adjacent CâCl bond effectively breaks the symmetry of Fe-N4 site, downward shifts the d-band center of Fe, facilitates the reduction and release of OH*, and remarkably lowers the energy barrier of rate-determining step. This work reveals the enormous potential of planar chlorination engineering for boosting the ORR activity of traditional metal-N4 site by thoroughly breaking their geometric symmetry.