RESUMEN

In this study, biological synthesis of silver nanoparticles (AgNPs) using Senna auriculata flower extract for antibacterial activities was reported. The silver spectra compared to the plant extract show a rightward shift in AgNP peaks, indicating successful nanoparticle formation. The absorption band at 302 nm and the disappearance or shift of other peaks further confirm the synthesis. X-ray diffraction (XRD) analysis reveals that the AgNPs synthesized with S. auriculata extract have an average crystallite size of 25 nm. Transmission electron microscopy (TEM) results exhibited a polydispersed, spherical shape with sizes ranging from 70 nm, in clear contrast to the electron microscope image that showed their spherical shape. When examining the selected area electron diffraction (SAED) image, a specific set of lattice planes was correlated with a specific spot. A histogram of AgNP particle size distribution can be seen. AgNPs were tested against four different strains of bacteria for their antibacterial effectiveness, including gram negative bacteria (Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus), as well as gram positive bacteria (S. aureus, d. Bacillus subtilis), at various concentrations of AgNP. The results of in vitro experiments indicate that AgNPs containing S. auriculata flowers inhibit amylase well. At two concentrations, ~16.03% and ~70.99%, AgNPs inhibit the reaction at low and high concentrations, respectively.

Asunto(s)

RESUMEN

Magnetic materials featuring triangular arrangements of spins are frequently investigated as platforms hosting magnetic frustration. Hexagonal perovskites with ordered vacancies serve as excellent candidates for two-dimensional triangular magnetism due to the considerable separation of the magnetic planes. In this work, the effects of chemical pressure on the ferromagnetic ground state of Ba2La2NiW2O12 by substitution of Ba2+ with Sr2+ to produce Sr2La2NiW2O12 are investigated. The two materials are characterized using synchrotron-based XRD, XANES and EXAFS in addition to magnetometry in order to correlate their crystal structures and magnetic properties. Both materials form in space group R3, yet as a result of the enhanced bending of key bond angles due to the effects of chemical pressure, the TC value of the magnetic Ni2+ sublattice is reduced from ∼6 K in Ba2La2NiW2O12 to 4 K in Sr2La2NiW2O12.

RESUMEN

Over the last three decades, the technology that makes it possible to follow chemical processes in the solid state in real time has grown enormously. These studies have important implications for the design of new functional materials for applications in optoelectronics and sensors. Light-matter interactions are of particular importance, and photocrystallography has proved to be an important tool for studying these interactions. In this technique, the three-dimensional structures of light-activated molecules, in their excited states, are determined using single-crystal X-ray crystallography. With advances in the design of high-power lasers, pulsed LEDs and time-gated X-ray detectors, the increased availability of synchrotron facilities, and most recently, the development of XFELs, it is now possible to determine the structures of molecules with lifetimes ranging from minutes down to picoseconds, within a single crystal, using the photocrystallographic technique. This review discusses the procedures for conducting successful photocrystallographic studies and outlines the different methodologies that have been developed to study structures with specific lifetime ranges. The complexity of the methods required increases considerably as the lifetime of the excited state shortens. The discussion is supported by examples of successful photocrystallographic studies across a range of timescales and emphasises the importance of the use of complementary analytical techniques in order to understand the solid-state processes fully.

RESUMEN

PURPOSE: To analyze the microstructural and mechanical properties of various commercial trademarks of lithium disilicate ceramics for CAD-CAM systems. MATERIALS AND METHODS: Specimens of different lithium disilicate ceramics were obtained and randomized into 5 groups (n = 14): EM: e.max CAD; RT: Rosetta SM; EV: Evolith; PM: Smile-Lithium CAD; and, HS: HaHaSmile. The microstructural analysis was performed by X-ray diffraction (XRD) and scanning electron microscopy (SEM); for flexural strength, the three-point bending flexure test was used. XRD and SEM data were qualitatively evaluated. Data from flexural strength were assessed with one-way ANOVA test (α = 0.05) and Weibull analysis. RESULTS: High peaks corresponding to the lithium metasilicate and lithium disilicate pattern with similar intensities were observed in all ceramics in the XRD analysis. SEM images showed similar patterns of crystalline structure in the EM and RT ceramics, while the other three groups presented different crystal morphologies than the previous ones and were similar to each other. No differences were found in flexural strength among the groups (p = 0.28). CONCLUSIONS: The CAD-CAM lithium disilicate ceramics showed comparable crystalline intensities. The microstructure of the EM and RT ceramics were different from the other groups. Flexural strength was similar among all ceramics.

RESUMEN

The stratum corneum (SC) presents certain limitations for topical administration of medication, which can be overcome using penetration enhancers (PEs) such as terpene (TP). The SC is also crucial for maintaining the skin barrier and consists of two lamellar structures: the short periodicity phase (SPP) and long periodicity phase (LPP). In this study, we monitored changes in the X-ray diffraction peaks of the human SC, 30 min after TP application (neroridol, 1,8-cineol, and d-limonene). With the application of nerolidol, no significant changes were observed in the small-angle diffraction peak positions for the lamellar structure of SPP, but the integrated intensity decreased. On the contrary, when applying 1,8-cineole and d-limonene, a lower angle peak shift with broadening of the peak width of SPP diffraction peaks was observed for d-limonene than for 1,8-cineole, and the degree of peak shift and width broadening was greater for d-limonene than for 1,8-cineole. The diffraction peaks of LPP disappeared when 1,8-cineole and d-limonene were applied. These results indicate that the degree of interaction between the SC and TP differs depending on the molecular species, and d-limonene and 1,8-cineole exhibit penetration-enhancing via lamellar structure disruption of both SPP and LPP, immediately after application.

RESUMEN

A new complex of copper(II) with methyl-5-(trifluoromethyl)pyrazol-3-yl-ketazine (H2L) was synthesized with the composition [Cu2L2]∙C2H5OH (1). Recrystallization of the sample from DMSO yielded a single crystal of the composition [Cu2L2((CH3)2SO)] (2). The coordination compounds were studied by single-crystal X-ray diffraction analysis, IR spectroscopy, and static magnetic susceptibility method. The data obtained indicate that the polydentate ligand is coordinated by both acyclic nitrogen and heterocyclic nitrogen atoms. The cytotoxic activity of the ligand and complex 1 was investigated on human cell lines MCF7 (breast adenocarcinoma), Hep2 (laryngeal carcinoma), A549 (lung carcinoma), HepG2 (hepatocellular carcinoma), and MRC5 (non-tumor lung fibroblasts). The complex was shown to have a pronounced dose-dependent cytotoxicity towards these cell lines with LC50 values in the range of 0.18-4.03 µM.

Asunto(s)

RESUMEN

The structure and physicochemical properties of polyvinyl alcohol (PVA) and PVA/glycerol films have been investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetry/differential thermal analysis (TG/DTA), and advanced scanning probe microscopy (SPM). In the pure PVA films, SPM allowed us to observe ribbon-shaped domains with a different frictional and elastic contrast, which apparently originated from a correlated growth or assembly of PVA crystalline nuclei located within individual PVA clusters. The incorporation of 22% w/w glycerol led to modification in shape of those domains from ribbon-like in pure PVA to rounded in PVA/glycerol 22% w/w films; changes in the relative intensities of the XRD peaks and a decrease in the amorphous halo in the XRD pattern were also detected, while the DTA peak corresponding to the melting point remained at almost the same temperature. For higher glycerol content, FT-IR revealed additional glycerol-characteristic peaks presumably related to the formation of glycerol aggregates, and XRD, FT-IR, and DTA all indicated a reduction in crystallinity. For more than 36% w/w glycerol, the plasticization of the films complicated the acquisition of SPM images without tip-induced surface modification. Our study contributes to the understanding of crystallinity in PVA and how it is altered by a plasticizer such as glycerol.

RESUMEN

This work presents the results of studying dilute aqueous solutions of commercial Ln(NO3)3 · xH2O salts with Ln = Ce-Lu using X-ray diffraction (XRD), IR spectroscopy, X-ray absorption spectroscopy (XAS: EXAFS/XANES), and pH measurements. As a reference point, XRD and XAS measurements for characterized Ln(NO3)3 · xH2O microcrystalline powder samples were performed. The local structure of Ln-nitrate complexes in 20 mM Ln(NO3)3 · xH2O aqueous solution was studied under total external reflection conditions and EXAFS geometry was applied to obtain high-quality EXAFS data for solutions with low concentrations of Ln3+ ions. Results obtained by EXAFS spectroscopy showed significant contraction of the first coordination sphere during the dissolution process for metal ions located in the middle of the lanthanide series. It was established that in Ln(NO3)3 · xH2O solutions with Ln = Ce, Sm, Gd, Yb (c = 134, 100, 50 and 20 mM) there are coordinated and, to a greater extent, non-coordinated nitrate groups with bidentate and predominantly monodentate bonds with Ln ions, the number of which increases upon transition from cerium to ytterbium. For the first time, the antibacterial and antifungal activity of Ln(NO3)3 · xH2O Ln = Ce, Sm, Gd, Tb, Yb solutions with different concentrations and pH was presented. Cross-relationships between the concentration of solutions and antimicrobial activity with the type of Ln = Ce, Sm, Gd, Tb, Yb were established, as well as the absence of biocidal properties of solutions with a concentration of 20 mM, except for Ln = Yb. The important role of experimental conditions in obtaining and interpreting the results was noted.

RESUMEN

The novel structure of Hg(II) complexes including the pyridinium ylide C5H5NCHC(O)C6H4-m-Br (Y) were synthesized and reported in this study. In the first step, the pyridinium salt C5H5NCH2C(O)C6H4-m-Br (S) was produced by reacting 2,3'-dibromoactophenone and pyridine. then, treatment of S with K2CO3 gave the related pyridinium ylide Y. Finally, the reaction of Y with HgX2 and Hg(NO3)2·H2O leads to the formation of novel binuclear [HgY2][HgX4] (X=Cl (1); X=Br (2); X=I (3)) and polymeric [HgY(NO3)2]n (4) complexes. The structure of complex 2 was also determined by X-ray diffraction analysis. The obtained analyses proved the coordination through the ylidic carbon to metallic center. Additionally, Natural Bond Orbital (NBO), Energy Decomposition Analysis (EDA), and EDA-NOCV studies are also used to investigate the nature of metal-ligand bonding in the complexes. Finally, the antibacterial activity of 1-4 was also examined against Gram positive and negative represented significant levels of inhibitory potency respected to used standards.

Asunto(s)

RESUMEN

Sulfated fucan has attracted increasing research interest due to its various biological activities. Endo-1,3-fucanases are favorable tools for structure investigation and structure-activity relationships establishment of sulfated fucan. However, the three-dimensional structure of enzymes from the GH174 family has not been disclosed, which hinders the understanding of the action mechanism. This study reports the first crystal structure of endo-1,3-fucanase from GH174 family (Fun174A) at a resolution of 1.60 Å. Notably, Fun174A exhibited an unusual distorted ß-sandwich fold, which is distinct from other known glycoside hydrolase folds. The conserved amino acid residues D119 and H154 were proposed as the catalytic residues in the family. Molecular docking suggested that Fun174A primarily recognized sulfated fucan through a series of polar amino acid residues around the substrate binding pocket. Furthermore, structural bioinformatics analysis suggested that the structural analogs of Fun174A may be extensively implicated in the bacterial metabolism of polysaccharides, which provided opportunities for the discovery of novel glycoside hydrolase. This study offers new insights into the structural diversity of glycoside hydrolases and will contribute to the establishment of a novel clan of glycoside hydrolases.

RESUMEN

The production of the extracellular polysaccharide from the thermophilic bacterium Aeribacillus pallidus was carried out in the study. The polysaccharide was isolated and characterized by means of GC-MS, FT-IR, DSC, and XRD analyses. The rheological, foaming, and emulsifying properties of the polysaccharide were determined. Using a sucrose-rich medium, 27.1 mg dried EPS/100 mL was obtained with 94% carbohydrate and 1.5% protein. The monosaccharide profile of water-soluble EPS-IM17 was composed of rhamnose, arabinose, xylose, mannose, glucose, and galactose. The foaming capacity and stability of EPS-IM17 were 26.67% (± 4.71) and 40.01% (± 4.95), respectively, and the foaming stability was not affected by time. The emulsification index of EPS-IM17 was 64.54 (± 8.71) and decreased to 38.47 (± 10.44) after 24 h. EPS-IM17 had a crystalline structure. Solutions at different concentrations (10, 20, 40 mgmL-1) showed pseudoplastic behavior. In conclusion, this report could be a lead study for the use of Aeribacillus pallidus extracellular polysaccharide for different applications.

RESUMEN

This study investigates the antibacterial activity and spectral characteristics of Cu-doped ZnO nanoparticles synthesized via the gelatin-based sol-gel method, focusing on their potential biomedical applications. Zn1₋ₓCuₓO nanoparticles (x = 0.0, 0.01, 0.03, and 0.05) were fabricated using this method. The incorporation of copper dopants into the ZnO matrix significantly influences both the crystalline structure and spectral properties of the nanoparticles. X-ray diffraction analysis confirms the presence of a wurtzite structure without any pyrochlore phase. The broadening of spectral features indicates modifications in lattice parameters and elastic constants. XRD results reveal that adding Cu to the ZnO lattice causes a decrease in crystallite size from 32 to 18 nm. Transmission electron microscopy shows spherical-shaped ZnO nanoparticles with sizes ranging from 30 to 40 nm. Moreover, Cu-doped ZnO nanoparticles exhibit considerable inhibition against bacterial growth. Adding Cu enhances the antibacterial activity of ZnO nanoparticles, suggesting their potential in biomedical applications. Overall, these findings highlight the promising prospects of sol-gel synthesized Cu-doped ZnO nanoparticles in the biomedical field.

RESUMEN

Sustainable batteries are key for powering electronic devices of the future, with aqueous zinc-ion batteries (AZIBs) standing out for their use of abundant, readily available elements, and safer production processes. Among the various electrode materials studied for AZIBs, the Chevrel Phase, Mo6S8 has shown promise due to its open framework, but issues with zinc ion trapping have limited its practical application. In this work, we employed computational methods to investigate the insertion-deinsertion mechanism in a series of isostructural Mo6S8-xSex (x = 0-8) solid solutions as materials that could balance the gravimetric capacity and reversible cycling for AZIBs. Density functional theory (DFT) calculations revealed that increasing the Se content would reduce the binding energy of Zn within the structures, enabling Zn deinsertion compared to the Mo6S8 structure. Experiments confirmed the formation of Mo6S8-xSex (x = 0-8) solid solutions, and electrochemical testing showed improved reversibility of Zn insertion/deinsertion as the amount of Se increased, consistent with the computational predictions. Furthermore, combined in operando X-ray diffraction and electrochemical studies revealed a continuous, gradual Zn-insertion process into Mo6S4Se4, in stark contrast to the abrupt phase changes observed upon Zn insertion in Mo6S8 and Mo6Se8. DFT calculations attributed the stabilization of Zn0.5Mo6S4Se4 as a prime reason for preventing phase separation, making Se-substituted compounds promising materials for high-performance AZIBs. Overall, this interdisciplinary approach, integrating computational modeling, materials synthesis, and advanced characterization techniques, offers a pathway for fine-tuning anion chemistry that can help create high-performance electrode materials for sustainable energy storage technologies.

RESUMEN

In this work, bismuth ferrites (BFO) nanoparticles were produced in the form of using sol-gel technique, followed by annealing in a tube furnace in temperatures from 400 °C to 650 ºC. X-ray diffraction (XRD) results showed the formation of small sizes nanoparticles (NPs) with high purity. Structural analysis displayed that annealing at 600 ºC could make BFO NPs be fitted to rhombohedral space group (R3c), with small quantity of spurious phases. The sizes of the BFO nanoparticles determined by transmission electron microscopy (HRTEM) are between 50 to 100 nm. To evaluate the efficiency of BFO in antimicrobial susceptibility tests, the nanoparticles were dispersed through nanoemulsion and tested agar diffusion method and dilution in a 96 well plate using a Gram positive strains (Staphylococcus aureus) and Gram negative strain (Escherichia coli). The antibacterial activity of the BFO NPs was partially tested at concentrations of 2 mg/mL with MIC greater than 60 µg/mL for both bacteria.

RESUMEN

Hydrated dispersions containing equimolar mixtures of cationic and anionic amphiphiles, referred to as catanionic systems, exhibit synergistic physicochemical properties, and mixing single-chain cationic and anionic lipids can lead to the spontaneous formation of vesicles as well as other phase structures. In the present work, we have characterized two catanionic systems prepared by mixing N-acyltaurines (NATs) and sarcosine alkyl esters (SAEs) bearing 11 and 12 C atoms in the acyl/alkyl chains. Turbidimetric and isothermal titration calorimetric studies revealed that both NATs form equimolar complexes with SAEs having matching acyl/alkyl chains. The three-dimensional structure of the sarcosine lauryl ester (lauryl sarcosinate, LS)-N-lauroyltaurine (NLT) equimolar complex has been determined by single-crystal X-ray diffraction. The LS-NLT equimolar complex is stabilized by electrostatic attraction and multiple hydrogen bonds, including classical, strong N-H···O hydrogen bonds as well as several C-H···O hydrogen bonds between the two amphiphiles. DSC studies showed that both equimolar complexes show single sharp phase transitions. Transmission electron microscopy and dynamic light scattering studies have demonstrated that the LS-NLT catanionic complex assemblies yield stable medium-sized vesicles (diameter 280-350 nm). These liposomes were disrupted at high pH, suggesting that the designed catanionic complexes can be used to develop base-labile drug delivery systems. In vitro studies with these catanionic liposomes showed efficient entrapment (73% loading) and release of the anticancer drug 5-fluorouracil in the physiologically relevant pH range of 6.0-8.0. The release rate was highest at pH 8.0, reaching about 78%, 90%, and 100% drug release at 2, 6, and 12 h, respectively. These observations indicate that LS-NLT catanionic vesicles will be useful for designing drug delivery systems, particularly for targeting organs such as the colon, which are inherently at basic pH.

Asunto(s)

RESUMEN

Precise regulation of sarcomeric contraction is essential for normal cardiac function. The heart must generate sufficient force to pump blood throughout the body, but either inadequate or excessive force can lead to dysregulation and disease. Myosin regulatory light chain (RLC) is a thick-filament protein that binds to the neck of the myosin heavy chain. Post-translational phosphorylation of RLC (RLC-P) by myosin light chain kinase is known to influence acto-myosin interactions, thereby increasing force production and Ca2+-sensitivity of contraction. Here, we investigated the role of RLC-P on cardiac structure and function as sarcomere length and [Ca2+] were altered. We found that at low, non-activating levels of Ca2+, RLC-P contributed to myosin head disorder, though there were no effects on isometric stress production and viscoelastic stiffness. With increases in sarcomere length and Ca2+-activation, the structural changes due to RLC-P become greater, which translates into greater force production, greater viscoelastic stiffness, slowed myosin detachment rates and altered nucleotide handling. Altogether, these data suggest that RLC-P may alter thick-filament structure by releasing ordered, off-state myosin. These more disordered myosin heads are available to bind actin, which could result in greater force production as Ca2+ levels increase. However, prolonged cross-bridge attachment duration due to slower ADP release could delay relaxation long enough to enable cross-bridge rebinding. Together, this work further elucidates the effects of RLC-P in regulating muscle function, thereby promoting a better understanding of thick-filament regulatory contributions to cardiac function in health and disease. KEY POINTS: Myosin regulatory light chain (RLC) is a thick-filament protein in the cardiac sarcomere that can be phosphorylated (RLC-P), and changes in RLC-P are associated with cardiac dysfunction and disease. This study assesses how RLC-P alters cardiac muscle structure and function at different sarcomere lengths and calcium concentrations. At low, non-activating levels of Ca2+, RLC-P contributed to myofilament disorder, though there were no effects on isometric stress production and viscoelastic stiffness. With increases in sarcomere length and Ca2+-activation, the structural changes due to RLC-P become greater, which translates into greater force production, greater viscoelastic stiffness, slower myosin detachment rate and altered cross-bridge nucleotide handling rates. This work elucidates the role of RLC-P in regulating muscle function and facilitates understanding of thick-filament regulatory protein contributions to cardiac function in health and disease.

RESUMEN

OBJECTIVE: Radiation therapy is applied in the treatment of head and neck cancer patients. However, oral-health-related side effects like hyposalivation and a higher prevalence of caries have been shown. This study aims to assess the influence of different radiotherapy doses on the mechanical properties, roughness, superficial microstructure, and crystallinity of the enamel and dentin of human premolar teeth. METHODS: Specimens (n = 25) were categorized into five groups based on the radiation dose received (0, 10, 30, 50, and 70 Gy). The enamel and dentin of these specimens were subjected to a microhardness tester, profilometer, atomic force microscopy (AFM), scanning electron microscopy (SEM), and X­ray diffraction (XRD) before and after different irradiation doses and compared to hydroxylapatite in each group. The data were analyzed using repeated-measures analysis of variance (ANOVA). RESULTS: Therapeutic radiation doses of 30, 50, and 70 Gy led to a decrease in the microhardness and an increase in the average roughness of the enamel, and rougher surfaces were observed in the mixed three-dimensional images. Moreover, in the dentin, a similar outcome could be observed for more than 10 Gy. The main crystalline phase structure remained hydroxylapatite, but the crystallinity decreased and the crystalline size increased above 10 Gy. The superficial micromorphology revealed granulation, fissures, and cracks in a dose-dependent manner. Radiation below 70 Gy had little effect on the hydroxylapatite concentration during the whole experiment. CONCLUSION: Above a radiation dose of 30 Gy, the micromorphology of the tooth enamel changed. This occurred for dentin above 10 Gy, which indicates that dentin is more sensitive to radiotherapy than enamel. The radiation dose had an effect on the micromorphology of the hard tissues of the teeth. These results illustrate the possible mechanism of radiation-related caries and have guiding significance for clinical radiotherapy.

RESUMEN

In this article, we report sterically-controlled iron sites based on non-chelating bulky imidazole ligands. Adding 6 equiv. of 1,2-dimethylimidazole (1,2-Me2Im) to Fe(OTf)2⋅2CH3CN affords the first example of a 5-coordinate imidazole­iron complex ([Fe(1,2-Me2Im)5](OTf)2, 1). The structure is distorted square pyramidal (τ5 = 0.41). When an iPr group is substituted for the methyl group at the 2-position on the imidazole (2-iPr-1-MeIm), the 14-electron complex ([Fe(2-iPr-1-MeIm)4](OTf)2, 2) is obtained. This complex exhibits slightly distorted tetrahedral geometry (τ'4 = 0.93) with four N-donors and serves as a 4-His iron structural model complex for carotenoid cleavage dioxygenases (CCD). The electronic structure of 1 and 2 were characterized by Mössbauer spectroscopy. Reactions of 1 and 2 with model olefin substrates (1-R-4-(1-methoxyprop-1-en-2-yl)benzene; R = Me or Br) in the presence of oxygen result in olefin cleavage yielding ketone and aldehyde products, although 2 yields more products than 1. Support for a proposed reaction mechanism for 2 is offered from Density Functional Theory (DFT) calculations.

RESUMEN

This work presents a new strategy to achieve the growth of copper sulfide nanoclusters with high nuclearity. Through a phosphine-assisted C-S reductive cleavage approach, an intrinsically chiral [Cu4] cluster passes through a [S-Cu9] cluster and transforms into a higher-nuclearity [S-Cu36] cluster, which features a core-shell structure with a [Cu4]4+ core encapsulated by a chiral [Cu20S12] shell. Interestingly, the spiral arrangement of the bidental ligands on the surface of the [S-Cu36] cluster leads to the L-/R-enantiomeric configurations. Moreover, by utilization of [Na(THF)6]+ as a chiral adaptive counterion, [S-Cu36] can be interlocked separately, thus enabling the isolation of homochiral clusters. Theoretical calculation suggests that the configuration transition between two enantiomeric [Na(THF)6]+ species is favorable at room temperature, thereby promoting the cocrystallization of resulting chiral products. This study introduces a novel perspective on the synthesis of chiral copper sulfide nanoclusters and presents an innovative approach to achieving the chiral separation of nanoclusters.

RESUMEN

With the emergence of ultrafast X-ray sources, interest in following fast processes in small molecules and macromolecules has increased. Most of the current research into ultrafast structural dynamics of macromolecules uses X-ray free-electron lasers. In parallel, small-scale laboratory-based laser-driven ultrafast X-ray sources are emerging. Continuous development of these sources is underway, and as a result many exciting applications are being reported. However, because of their low flux, such sources are not commonly used to study the structural dynamics of macromolecules. This article examines the feasibility of time-resolved powder diffraction of macromolecular microcrystals using a laboratory-scale laser-driven ultrafast X-ray source.