RESUMEN

PREMISE: Understanding the responses of functional traits in tree species to climate variability is essential for predicting the future of tropical montane cloud forest (TMCF) tree species, especially in Andean montane environments where fog pockets act as moisture traps. METHODS: We studied the distribution of Magnolia gentryi, measured its spatial arrangement, identified local hotspots, and evaluated the extent to which climate-related factors are associated with its distribution. We then analyzed the variation in 13 functional traits of M. gentryi and the relationship with climate. RESULTS: Andean TMCF climatic factors constrain M. gentryi spatial distribution with significant patches or gaps that are associated with high precipitation and mean minimum temperature. The functional traits of M. gentryi are limited by the Andean TMCF climatic factors, resulting in reduced within-species variation in traits associated with water deficit. CONCLUSIONS: The association between functional traits and climate oscillation is crucial for understanding the growth conditions of relict-endemic species and is essential for conservation efforts. Forest trait diversity and species composition change because of fluctuations in hydraulic safety-efficiency gradients.

RESUMEN

The mass spectral database of tree species built by US Fish and Wildlife Service has thousands of entries and has been a valuable resource to combat illegal logging and international trade. The database was and continues to be constructed using a particular ambient ionization time-of-flight mass spectrometry (TOF-MS) platform in the agency branch in Ashland, OR, with which queries of unknown wood samples are investigated exclusively. Laboratories that operate different MS instruments also have an interest in using the database if they can produce valid matches to known samples compatible with the database. Four species were selected for inter-laboratory comparison using Orbitrap MS instruments and the equivalent TOF-MS platform with direct analysis in real time ionization of institution-sourced wood samples. Identities of the known samples were confirmed by examination of their microscopic wood anatomy. Orbitrap analysis was able to identify each species as confidently as the TOF instruments, often with less variation in spectra but not necessarily greater mass accuracy or better-matched signal abundance to the control database. The Orbitrap program also had to be doubled to two scanned mass ranges appended for greater peak intensity, before spectra could be correctly matched to the database, but the program was successful.

Asunto(s)

RESUMEN

Water transport, mechanical support and storage are the vital functions provided by the xylem. These functions are carried out by different cells, exhibiting significant anatomical variation not only within species but also within individual trees. In this study, we used a comprehensive dataset to investigate the consistency of predicted hydraulic vessel diameter widening values in relation to the distance from the tree apex, represented by the relationship Dh ∝ Lß (where Dh is the hydraulic vessel diameter, L the distance from the stem apex and ß the scaling exponent). Our analysis involved 10 Fagus sylvatica L. trees sampled at two distinct sites in the Italian Apennines. Our results strongly emphasize that vessel diameter follows a predictable pattern with the distance from the stem apex and ß ~ 0.20 remains consistent across cambial age and climates. This finding supports the hypothesis that trees do not alter their axial configuration represented by scaling of vessel diameter to compensate for hydraulic limitations imposed by tree height during growth. The study further indicates that within-tree variability significantly contributes to the overall variance of the vessel diameter-stem length exponent. Understanding the factors that contribute to the intraindividual variability in the widening exponent is essential, particularly in relation to interspecific responses and adaptations to drought stress.

Asunto(s)

Asunto(s)

RESUMEN

Future climatic scenarios forecast increasingly frequent droughts that will pose substantial consequences on tree mortality. In light of this, drought-tolerant eucalypts have been propagated; however, the severity of these conditions will invoke adaptive responses, impacting the commercially valuable wood properties. To determine what mechanisms govern the wood anatomical adaptive response, highly controlled drought experiments were conducted in Eucalyptus grandis W. Hill ex Maiden, with the tree physiology and transcriptome closely monitored. In response to water deficit, E. grandis displays an isohydric stomatal response to conserve water and enable stem growth to continue, albeit at a reduced rate. Maintaining gaseous exchange is likely a critical short-term response that drives the formation of hydraulically safer xylem. For instance, the development of significantly smaller fibers and vessels was found to increase cellular density, thereby promoting drought tolerance through improved functional redundancy, as well as implosion and cavitation resistance. The transcriptome was explored to identify the molecular mechanisms responsible for controlling xylem cell size during prolonged water deficit. Downregulation of genes associated with cell wall remodeling and the biosynthesis of cellulose, hemicellulose and pectin appeared to coincide with a reduction in cellular enlargement during drought. Furthermore, transcript levels of NAC and MYB transcription factors, vital for cell wall component biosynthesis, were reduced, while those linked to lignification increased. The upregulation of EgCAD and various peroxidases under water deficit did not correlate with an increased lignin composition. However, with the elevated cellular density, a higher lignin content per xylem cross-sectional area was observed, potentially enhancing hydraulic safety. These results support the requirement for higher density, drought-adapted wood as a long-term adaptive response in E. grandis, which is largely influenced by the isohydric stomatal response coupled with cellular expansion-related molecular processes.

Asunto(s)

RESUMEN

This methodological study describes the adaptation of a new method in digital wood anatomy, pixel-contrast densitometry, for angiosperm species. The new method was tested on eight species of shrubs and small trees in Southern Siberia, whose wood structure varies from ring-porous to diffuse-porous, with different spatial organizations of vessels. A two-step transformation of wood cross-section photographs by smoothing and Otsu's classification algorithm was proposed to separate images into cell wall areas and empty spaces within (lumen) and between cells. Good synchronicity between measurements within the ring allowed us to create profiles of wood porosity (proportion of empty spaces) describing the growth ring structure and capturing inter-annual differences between rings. For longer-lived species, 14-32-year series from at least ten specimens were measured. Their analysis revealed that maximum (for all wood types), mean, and minimum porosity (for diffuse-porous wood) in the ring have common external signals, mostly independent of ring width, i.e., they can be used as ecological indicators. Further research directions include a comparison of this method with other approaches in densitometry, clarification of sample processing, and the extraction of ecologically meaningful data from wood structures.

RESUMEN

BACKGROUND AND AIMS: Secondary cell wall (SCW) thickening is a major cellular developmental stage determining wood structure and properties. Although the molecular regulation of cell wall deposition during tracheary element differentiation has been well established in primary growth systems, less is known about the gene regulatory processes involved in the multi-layered SCW thickening of mature trees. METHODS: Using third-generation [long-read single-molecule real-time (SMRT)] and second-generation [short-read sequencing by synthesis (SBS)] sequencing methods, we established a Pinus bungeana transcriptome resource with comprehensive functional and structural annotation for the first time. Using these approaches, we generated high spatial resolution datasets for the vascular cambium, xylem expansion regions, early SCW thickening, late SCW thickening and mature xylem tissues of 71-year-old Pinus bungeana trees. KEY RESULTS: A total of 79 390 non-redundant transcripts, 31 808 long non-coding RNAs and 5147 transcription factors were annotated and quantified in different xylem tissues at all growth and differentiation stages. Furthermore, using this high spatial resolution dataset, we established a comprehensive transcriptomic profile and found that members of the NAC, WRKY, SUS, CESA and LAC gene families are major players in early SCW formation in tracheids, whereas members of the MYB and LBD transcription factor families are highly expressed during late SCW thickening. CONCLUSIONS: Our results provide new molecular insights into the regulation of multi-layered SCW thickening in conifers. The high spatial resolution datasets provided can serve as important gene resources for improving softwoods.

Asunto(s)

RESUMEN

PREMISE: Stem xylem transports water and nutrients, mechanically supports aboveground tissues, and stores water and nonstructural carbohydrates. These three functions are associated with three types of cells-vessel, fiber, and parenchyma, respectively. METHODS: We measured stem theoretical hydraulic conductivity (Kt), modulus of elasticity (MOE), tissue water content, starch, soluble sugars, cellulose, and xylem anatomical traits in 15 liana and 16 tree species across three contrasting sites in Southwest China. RESULTS: Lianas had higher hydraulic efficiency and tissue water content, but lower MOE and cellulose than trees. Storage traits (starch and soluble sugars) did not significantly differ between lianas and trees, and trait variation was explained mainly by site, highlighting how environment shapes plant storage strategies. Kt was significantly positively correlated with vessel diameter and vessel area fraction in lianas and all species combined. The MOE was significantly positively correlated with fiber area fraction, wood density, and cellulose in lianas and across all species. The tissue water content was significantly associated with parenchyma area fraction in lianas. Support function was strongly linked with transport and storage functions in lianas. In trees, transport and support functions were not correlated, while storage function was tightly linked with transport and support functions. CONCLUSIONS: These findings enhance our understanding of the relationship between stem xylem structure and function in lianas and trees, providing valuable insights into how plants adapt to environmental changes and the distinct ecological strategies employed by lianas and by trees to balance the demands of hydraulic transport, mechanical support, and storage.

Asunto(s)

RESUMEN

The bronze doors of the Basilica of San Zeno in Verona, Italy, are a special case in art history research. They were made by several workshops during the twelfth century: stylistically, two to three workshops were assumed to produce the metal parts of the door. However, it is still unclear when exactly and if this interpretation can be supported by the chemical composition of the metal. In this research we aimed to verify the art history interpretation by identifying the alloy composition of each individual metal plate. The composition of the supporting wooden structures are discussed. A portable ED-XRF instrument and optical microscopes were used to analyse and document the doors non-invasively. The doors were also photographed to produce high resolution orthophotos and 3D models. We can confirm that the metal parts of the doors were made of leaded tin-bronze as well as leaded brass and mounted on a wooden structure mainly made of spruce and oak wood. Chemically, two/three different groups of alloys have been identified, which can be associated with two or three different workshops, and which largely correspond to the stylistic interpretation. Supplementary Information: The online version contains supplementary material available at 10.1186/s40494-024-01143-2.

RESUMEN

Widespread shrubification across the Arctic has been generally attributed to increasing air temperatures, but responses vary across species and sites. Wood structures related to the plant hydraulic architecture may respond to local environmental conditions and potentially impact shrub growth, but these relationships remain understudied. Using methods of dendroanatomy, we analysed shrub ring width (RW) and xylem anatomical traits of 80 individuals of Salix glauca L. and Betula nana L. at a snow manipulation experiment in Western Greenland. We assessed how their responses differed between treatments (increased versus ambient snow depth) and soil moisture regimes (wet and dry). Despite an increase in snow depth due to snow fences (28-39 %), neither RW nor anatomical traits in either species showed significant responses to this increase. In contrast, irrespective of the snow treatment, the xylem specific hydraulic conductivity (Ks) and earlywood vessel size (LA95) for the study period were larger in S. glauca (p < 0.1, p < 0.01) and B. nana (p < 0.01, p < 0.001) at the wet than the dry site, while both species had larger vessel groups at the dry than the wet site (p < 0.01). RW of B. nana was higher at the wet site (p < 0.01), but no differences were observed for S. glauca. Additionally, B. nana Ks and LA95 showed different trends over the study period, with decreases observed at the dry site (p < 0.001), while for other responses no difference was observed. Our results indicate that, taking into account ontogenetic and allometric trends, hydraulic related xylem traits of both species, along with B. nana growth, were influenced by soil moisture. These findings suggest that soil moisture regime, but not snow cover, may determine xylem responses to future climate change and thus add to the heterogeneity of Arctic shrub dynamics, though more long-term species- and site- specific studies are needed.

Asunto(s)

RESUMEN

The Rhine River valley of Germany has been facing recurrent and intense spells of drought and heatwaves threatening the health of trees in peri-urban forests. Crown damage intensified by climate change accelerates tree mortality, threatening its ecological, economic, and social benefits; however, the pattern of crown die-back in peri-urban forests remained unclear. We performed a field inventory to estimate the crown die-back of 2578 trees of 51 species from 68 randomly selected peri-urban forest plots in Karlsruhe region on the right bank of the Rhine, after the catastrophic summer heatwave and drought of 2018. We related crown die-back to species-specific drought tolerance, wood anatomical traits, tree size, canopy surface temperature, tree density, Shannon's diversity and Gini coefficient for tree height. Regression results indicate that small-size trees were found to be more susceptible to canopy damage than large trees, with a 1-meter increase in tree height associated with a 0.8 % reduction in crown die-back. This size-dependent process is also species-specific. Among the 12 species with significant (p < 0.05) linear relationship between height and die-back, 9 species demonstrated negative correlations and 3 species showed positive relationships. Species tolerant to drought or cavitation (e.g., trees with diffuse porous xylem, 21 species) had significantly lower crown dieback. For example, with a 1-point-scale increase in drought tolerance crown die-back declined 14.35 %. Trees that experienced high canopy surface temperature and grew with high tree density and species diversity (Shannon's diversity) had more crown die-back. However, high structural diversity (Gini coefficient) was related to lower crown die-back. Our results suggested that future research should focus more on tree species-specific hydraulic and thermal traits and tree density and structure management to improve tree health and species selection in peri-urban forests under future climate change.

Asunto(s)

RESUMEN

Introduction: Forests are threatened by increasingly severe and more frequent drought events worldwide. Mono-specific forests, developed as a consequence of widespread management practices established early last century, seem particularly susceptible to global warming and drought compared with mixed-species forests. Although, in several contexts, mixed-species forests display higher species diversity, higher productivity, and higher resilience, previous studies highlighted contrasting findings, with not only many positive but also neutral or negative effects on tree performance that could be related to tree species diversity. Processes underlying this relationship need to be investigated. Wood anatomical traits are informative proxies of tree functioning, and they can potentially provide novel long-term insights in this regard. However, wood anatomical traits are critically understudied in such a context. Here, we assess the role of tree admixture on Pinus sylvestris L. xylem traits such as mean hydraulic diameter, cell wall thickness, and anatomical wood density, and we test the variability of these traits in response to climatic parameters such as temperature, precipitation, and drought event frequency and intensity. Methods: Three monocultural plots of P. sylvestris and three mixed-stand plots of P. sylvestris and Quercus sp. were identified in Poland and Spain, representing Continental and Mediterranean climate types, respectively. In each plot, we analyzed xylem traits from three P. sylvestris trees, for a total of nine trees in monocultures and nine in mixed stands per study location. Results: The results highlighted that anatomical wood density was one of the most sensitive traits to detect tree responses to climatic conditions and drought under different climate and forest types. Inter-specific facilitation mechanisms were detected in the admixture between P. sylvestris and Quercus sp., especially during the early growing season and during stressful events such as spring droughts, although they had negligible effects in the late growing season. Discussion: Our findings suggest that the admixture between P. sylvestris and Quercus sp. increases the resilience of P. sylvestris to extreme droughts. In a global warming scenario, this admixture could represent a useful adaptive management option.

RESUMEN

PREMISE: Insect defoliation of trees causes unusual changes to wood anatomy and slows radial growth that decreases tree value; however, the characteristics of these anatomical changes in hardwoods remain unclear. The aim of this study was to characterize the anatomy and histochemistry of the wood in trunks of Betula maximowicziana trees after severe insect defoliation. METHODS: Secondary xylem tissues were sampled from trunks that had been defoliated by Caligula japonica at Naie and Furano in central Hokkaido during 2006-2012, then cross-dated and examined microscopically and stained histochemically to characterize anatomical and chemical changes in the cells. RESULTS: White rings with thin-walled wood fibers and greatly reduced annual ring width in the subsequent year were observed in samples from both sites. From these results, the year that the white rings formed was determined, and severe defoliation was confirmed to trigger white ring formation. The characteristics may prove useful to detect the formation year of white rings. Scanning electron microscopy and histochemical analyses of the white rings indicated that the thickness of the S2 layer in the wall of wood fiber cells decreased, but xylan and lignin were still deposited in the cell walls of wood fibers. However, the walls of the fibers rethickened after the defoliation. CONCLUSIONS: Our results suggest that B. maximowicziana responds to a temporary lack of carbon inputs due to insect defoliation by regulating the thickness of the S2 layer of the cell wall of wood fibers. For B. maximowicziana, insect defoliation late in the growing season has serious deleterious effects on wood formation and radial growth.

Asunto(s)

RESUMEN

BACKGROUND AND AIMS: Whole-plant performance in water-stressed and disturbance-prone environments depends on a suitable supply of water from the roots to the leaves, storage of reserves during periods of shortage, and a morphological arrangement that guarantees the maintenance of the plants anchored to the soil. All these functions are performed by the secondary xylem of roots. Here, we investigate whether different growth forms of Fabaceae species from the seasonally dry Neotropical environment have distinct strategies for water transport, mechanical support and non-structural carbon and water storage in the root secondary xylem. METHODS: We evaluated cross-sections of root secondary xylem from species of trees, shrubs and subshrubs. We applied linear models to verify the variability in secondary xylem anatomical traits among growth forms. KEY RESULTS: Secondary xylem with larger vessels and lower vessel density was observed in tree species. Vessel wall thickness, vessel grouping index, potential hydraulic conductivity and cell fractions (vessels, fibres, rays and axial parenchyma) were not statistically different between growth forms, owing to the high interspecific variation within the groups studied. CONCLUSION: Our results showed that the variability in anatomical traits of the secondary xylem of the root is species specific. In summary, the cellular complexity of the secondary xylem ensures multiple functional strategies in species with distinct growth forms, a key trait for resource use in an environment with strong water seasonality.

Asunto(s)

RESUMEN

The predicted increase of drought intensity in South-East Asia has raised concern about the sustainability of rubber (Hevea brasiliensis Müll. Arg.) cultivation. In order to quantify the degree of phenotypic plasticity in this important tree crop species, we analysed a set of wood and leaf traits related to the hydraulic safety and efficiency in PB260 clones from eight small-holder plantations in Jambi province, Indonesia, representing a gradient in local microclimatic and edaphic conditions. Across plots, branch embolism resistance (P50) ranged from -2.14 to -2.58 MPa. The P50 and P88 values declined, and the hydraulic safety margin increased, with an increase in the mean annual vapour pressure deficit (VPD). Among leaf traits, only the changes in specific leaf area were related to the differences in evaporative demand. These variations of hydraulic trait values were not related to soil moisture levels. We did not find a trade-off between hydraulic safety and efficiency, but vessel density (VD) emerged as a major trait associated with both safety and efficiency. The VD, and not vessel diameter, was closely related to P50 and P88 as well as to specific hydraulic conductivity, the lumen-to-sapwood area ratio and the vessel grouping index. In conclusion, our results demonstrate some degree of phenotypic plasticity in wood traits related to hydraulic safety in this tropical tree species, but this is only in response to the local changes in evaporative demand and not soil moisture. Given that VPD may increasingly limit plant growth in a warmer world, our results provide evidence of hydraulic trait changes in response to a rising evaporative demand.

Asunto(s)

RESUMEN

There is a strong decrease in liana diversity along latitudinal and altitudinal gradients at a global scale, and there is a marked difference in liana diversity between tropical and temperate ecosystems. From these observations, it has been proposed that cold temperatures would restrict the ecological patterns of liana because of their vascular system's vulnerability to freeze-thaw embolism. Our objective was to establish the functional mechanism that drives the loss of liana diversity along a latitudinal temperature gradient. We evaluate the ecological performance of liana in 10 different species based on the apical growth rate, as well as functional traits associated with efficiency (maximum hydraulic conductivity and percentage conductivity lost) and safety of water transport (vessel diameter, vessel density, wood density, and root pressure). We found that at the colder (more southern) site within the latitudinal gradient, liana species showed lower performance, with a fivefold decrease in their apical growth rate as compared to the warmer (more northern) sites. We postulate that this lower performance results from a much lower water transport efficiency (26.1-fold decrease as compared to liana species that inhabit warmer sites) that results from higher freeze-thaw (37.5% of PLC) and reduction of vessel diameter (3 times narrower). These results are unmistakable evidence that cold temperature restricts liana performance: in a cold environment, liana species exhibit a strong decrease in performance, low efficiency, and higher safety of water transport. Conversely, at warmer sites, we found that liana species exhibit functional strategies associated with higher performance, higher efficiency, and lower safety of water transport capacity. This trade-off between efficiency and safety of water transport and their effects on performance could explain the latitudinal pattern of liana diversity.

RESUMEN

Increasing mean global temperatures in conjunction with increases in the frequency and severity of drought events affect plant growth and physiology, particularly in more arid and mountainous ecosystems. Thus, it is imperative to understand the response of plant growth to climatic oscillations in these regions. This study used dendrochronological and wood anatomical traits of two shrub species growing over 1500 m.a.s.l. in the Serra da Estrela (Portugal), Juniperus communis and Cytisus oromediterraneus, to analyze their response to temperature and water availability parameters. Results showed an increase in shrub growth related to the increase over time of the mean minimum and maximum monthly temperature in Serra da Estrela. Warming seems to promote shrub growth because it lengthens the growing season, although J. communis responds mainly to spring maximum temperature while C. oromediterraneus is influenced by fall maximum temperature. Hydraulic traits of J. communis and C. oromediterraneus were negatively influenced by winter drought. Additionally, there were species-specific differences in response to changes in water availability. J. communis radial growth was significantly affected by spring drought conditions, while C. oromediterraneus radial growth was significantly affected by spring precipitation. C. oromediterraneus hydraulic traits were also significantly affected by drought conditions from the previous spring and fall. This study shed light on specific differences in the response to climate between two co-occurring shrub species in the top of an understudied Mediterranean mountain, which could have implications in the future distribution of woody species within this region.

Asunto(s)

RESUMEN

Evidence for secondary growth extends into the Early Devonian, 407 million years ago, raising questions about tempo and mode of origination of this key developmental feature. To address such questions, we analyze anatomy in the four oldest fossil plants with well-characterized woody tissues; one of these represents a new genus, described here formally. The new fossil is documented using the cellulose acetate peel technique and associated methods. We use the paradigm of structural fingerprints to identify developmental components of cambial growth based on fossil anatomy. We integrate developmental inferences within a theoretical framework of modular regulation of secondary growth. The fossils possess structural fingerprints consistent with four different combinations of regulatory mechanisms (modules) acting in cambial growth, representing four distinct modes of secondary growth. The different modes of secondary growth demonstrate that cambial growth is an assemblage of regulatory modules whose deployment followed a mosaic pattern across woody plants, which may represent ancestors of younger lineages that exhibit woody growth. The diverse modes of wood development occupy a wide morphospace in the anatomy of wood in the Early Devonian, suggesting that the origins of secondary growth and of its modular components pre-date this interval.

Asunto(s)

RESUMEN

PREMISE: Plants survive in habitats with limited resource availability and contrasting environments by responding to variation in environmental factors through morphophysiological traits related to species performance in different ecosystems. However, how different plant strategies influence the megadiversity of tropical species has remained a knowledge gap. METHODS: We analyzed variations in 27 morphophysiological traits of leaves and secondary xylem in Erythroxylum pulchrum and Tapirira guianensis, which have the highest absolute dominance in these physiognomies and occur together in areas of restinga and dense ombrophilous forest to infer water-transport strategies of Atlantic Forest woody plants. RESULTS: The two species presented different sets of morphophysiological traits, strategies to avoid embolism and ensure water transport, in different phytophysiognomies. Tapirira guianensis showed possible adaptations influenced by phytophysiognomy, while E. pulchrum showed less variation in the set of characteristics between different phytophysiognomies. CONCLUSIONS: Our results provide essential tools to understand how the environment can modulate morphofunctional traits and how each species adjusts differently to adapt to different phytophysiognomies. In this sense, the results for these species reveal new species-specific responses in the tropical forest. Such knowledge is a prerequisite to predict future development of the most vulnerable forests as climate changes.

Asunto(s)

RESUMEN

In tropical and subtropical regions, much research is still required to explore the dendrochronological potential of their trees. This study aims to evaluate the anatomical structure and dendrochronological potential of three Mediterranean desert shrubs in Egypt (Lycium schweinfurthii var. schweinfurthii, L. europaeum, and Calligonum polygonoides subsp. comosum) supported by X-ray density. The results showed that the target species had distinct growth rings at macroscopic and microscopic levels. The vessel traits reflected the adaptability of each species with the prevailing arid climate conditions. After the exclusion of the non-correlated series, we obtained three site chronologies that cover the years 2013-2022 for L. schweinfurthii, 2012-2022 for L. europaeum, and 2011-2022 for C. comosum. The mean series intercorrelation was 0.746, 0.564, and 0.683 for L. schweinfurthii, L. europaeum, and C. comosum, respectively. The EPS (expressed population signal) values ranged from 0.72 to 0.80, while the SNR (species-to-noise ratio) ranged from 9.1 to 21.5. Compiling all series of L. schweinfurthii raised the EPS value to 0.86. The chronologies developed for the studied species were relatively short since we dealt with multi-stemmed shrubs. The average percentage difference between latewood density (LWD) and earlywood density (EWD) in C. comosum, L. europaeum, and L. schweinfurthii were 11.8% ± 5.5, 5.2%± 1.87, and 3.6% ± 1.86, respectively. X-ray densitometry helped in the precise determination of the ring borders of the studied species. The relationships between the radial growth of the studied species and the climate variables were weak to moderate but mostly not significant (i.e., r < 0.7). Generally, the radial growth of the target species had a weak to moderate positive correlation with temperature and precipitation during the wet season (winter), while negatively correlated with temperature for the rest of the year, particularly in summer. Our data agrees with earlier findings that ring formation starts at the beginning of the long vegetative stage, then the rest of the assimilated carbohydrates are directed to the flowering and fruiting at the end of the vegetative stages. For more efficient dendrochronological studies on subtropical and Mediterranean trees, we recommend carrying out xylogenesis studies, collection of phenological data, sampling 45-80 trees per species, using new techniques, and choosing homogeneous and close sites for wood sampling.