RESUMEN

Waste Cooking Oil (WCO), Soy Oil (SO), and Wastewater Sludge (WWS) have great potential to increase reclaimed asphalt pavement (RAP) content for economic and environmental benefits. This study explored the effects of SO and WCO on rutting, fatigue cracking, and low-temperature cracking performance of binders and Hot Mix Asphalt (HMA) with high RAP content. The potential effect of WWS on the performance and compaction efforts of high RAP content mixes at a 10 °C (50 °F) lower compaction temperature than the control compaction temperature was also investigated. The results indicated that 85% of the RAP binders can be incorporated while maintaining similar performance compared to the control by using 15% SO or 12.5% WCO as a rejuvenator with 2.5% virgin binder. Adding 1% WWS by weight of the total binder improved the binder's rheological properties, the mix's cracking performance, and the mix's density at lower compaction temperatures.

RESUMEN

The present study examines the use of waste cooking oil (WCO) as a substrate for medium-chain-length polyhydroxyalkanoates (mcl-PHA) production by Pseudomonas rhizophila S211. The genome analysis revealed that the S211 strain has a mcl-PHA cluster (phaC1ZC2DFI) encoding two class II PHA synthases (PhaC1 and PhaC2) separated by a PHA depolymerase (PhaZ), a transcriptional activator (PhaD) and two phasin-like proteins (PhaFI). Genomic annotation also identified a gene encoding family I.3 lipase that was able to hydrolyze plant oils and generate fatty acids as favorable carbon sources for cell growth and PHA synthesis via ß-oxidation pathway. Using a three-variable Doehlert experimental design, the optimum conditions for mcl-PHA accumulation were achieved in 10% of WCO-based medium with an inoculum size of 10% and an incubation period of 48 h at 30 °C. The experimental yield of PHA from WCO was 1.8 g/L close to the predicted yield of 1.68 ± 0.14 g/L. Moreover, 1H nuclear magnetic resonance spectroscopy analysis confirmed the extracted mcl-PHA. Overall, this study describes P. rhizophila as a cell factory for biosynthesis of biodegradable plastics and proposes green and efficient approach to cooking oil waste management by decreasing the cost of mcl-PHA production, which can help reduce the dependence on petroleum-based plastics.

RESUMEN

In the era of global energy crises and the pressing concern of fossil fuel depletion, the quest for sustainable alternatives has become paramount. The current study aims to optimize biodiesel extraction from a combination of waste cooking oil (WCO) and sesame seed oil (SSO) through response surface methodology (RSM) and artificial neural network (ANN). The cold flow properties of biodiesel produced from WCO are a major obstacle to the commercial use of biodiesel. On the other hand, SSO possesses better oxidation stability and cold flow properties. A mixture of waste cooking oil (i.e. 70 % by volume) and sesame seed oil (i.e. 30 % by volume) has been prepared for biodiesel production via a microwave-assisted transesterification process. For biodiesel yield optimization, the interaction among the operating parameters is developed by RSM, whereas biodiesel yield is predicted by ANN. The operating parameters include reaction speed, RPM (100-600 rpm), reaction time (1-5 min), methanol to oil ratio (8:1-12:1 v/v), and catalyst concentration (0.1-2 % w/w). The highest biodiesel yield of 94 % is found at a reaction speed of 350 rpm, reaction time of 3 min, catalyst concentration of 1.05 w/w, and methanol to oil ratio of 10:1. Furthermore, it is discovered that when estimating biodiesel production rate depending on reaction constraints, ANN shows lower comparative error compared to RSM. The results show that ANN outperforms RSM in terms of percentage improvement when it comes to biodiesel production prediction.

RESUMEN

Developing reusable and easy-to-operate biocatalysts is of significant interest in biodiesel production. Here, magnetic whole-cell catalysts constructed through immobilizing recombinant Escherichia coli cells (containing MAS1 lipase) into Fe3O4-chitosan magnetic microspheres (termed MWCC@MAS1) were used for fatty acid methyl ester (FAME) production from waste cooking oil (WCO). During the preparation process of immobilized cells, the effects of chitosan concentration and cell concentration on their activity and activity recovery were investigated. Optimal immobilization was achieved with 3% (w/v) chitosan solution and 10 mg wet cell/mL cell suspension. Magnetic immobilization endowed the whole-cell catalysts with superparamagnetism and improved their methanol tolerance, enhancing the recyclability of the biocatalysts. Additionally, we studied the effects of catalyst loading, water content, methanol content, and reaction temperature on FAME yield, optimizing these parameters using response surface methodology and Box-Behnken design. An experimental FAME yield of 89.19% was gained under the optimized conditions (3.9 wt% catalyst loading, 22.3% (v/w) water content, 23.0% (v/w) methanol content, and 32 °C) for 48 h. MWCC@MAS1 demonstrated superior recyclability compared to its whole-cell form, maintaining about 86% of its initial productivity after 10 cycles, whereas the whole-cell form lost nearly half after just five cycles. These results suggest that MWCC@MAS1 has great potential for the industrial production of biodiesel.

Asunto(s)

RESUMEN

Waste cooking oil is a common byproduct in the culinary industry, often posing disposal challenges. This study explores its conversion into the valuable bioplastic material, medium-chain-length polyhydroxyalkanoate (mcl-PHA), through microbial biosynthesis in controlled bioreactor conditions. Twenty-four bacterial isolates were obtained from oil-contaminated soil and waste materials in Mahd Ad-Dahab, Saudi Arabia. The best PHA-producing isolates were identified via 16S rDNA analysis as Neobacillus niacini and Metabacillus niabensis, with the sequences deposited in GenBank (accession numbers: PP346270 and PP346271). This study evaluated the effects of various carbon and nitrogen sources, as well as environmental factors, such as pH, temperature, and shaking speed, on the PHA production titer. Neobacillus niacini favored waste cooking oil and yeast extract, achieving a PHA production titer of 1.13 g/L, while Metabacillus niabensis preferred waste olive oil and urea, with a PHA production titer of 0.85 g/L. Both strains exhibited optimal growth at a neutral pH of 7, under optimal shaking -flask conditions. The bioreactor performance showed improved PHA production under controlled pH conditions, with a final titer of 9.75 g/L for Neobacillus niacini and 4.78 g/L for Metabacillus niabensis. Fourier transform infrared (FT-IR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) confirmed the biosynthesized polymer as mcl-PHA. This research not only offers a sustainable method for transforming waste into valuable materials, but also provides insights into the optimal conditions for microbial PHA production, advancing environmental science and materials engineering.

RESUMEN

Currently, pathogenic microorganisms are becoming more active in public utility areas like parking lots and waste shelters due to the accumulation of organic waste. This uncontrolled waste leads to decay, altering its composition and presenting a microbiological risk to public health. Additionally, it emits unpleasant odors containing chemicals that irritate the mucous membranes, causing discomfort in the nose, throat, and eyes by stimulating the trigeminal nerve. These odors can have various negative effects on both quality of life and public health. The study investigated the physicochemical properties of oil composites enriched with natural additives and determined their effectiveness in reducing the intensity of nuisance odours. The research showed over 82% reduction in decaying meat odour and almost 65% reduction in ammonia odour. A higher impact of the given composites on reducing the odour from decaying meat than from ammonia was observed. This may be due to the biocidal properties of the additives used (turmeric, thymol, salicylic acid, hops and curly sorrel) and the higher intensity of ammonia odor compared to meat-derived odour. Despite the non-porous nature of the solids tested (with similar specific surface areas ranging from 0.66 to 0.88 m2/g), they were capable of sorbing NH3.

Asunto(s)

RESUMEN

Squalene is a highly sought-after triterpene compound in growing demand, and its production offers a promising avenue for circular economy practices. In this study, we applied metabolic engineering principles to enhance squalene production in the nonconventional yeast Yarrowia lipolytica, using waste cooking oil as a substrate. By overexpressing key enzymes in the mevalonate pathway - specifically ERG9 encoding squalene synthase, ERG20 encoding farnesyl diphosphate synthase, and HMGR encoding hydroxy-methyl-glutaryl-CoA reductase - we achieved a yield of 779.9 mg/L of squalene. Further co-overexpression of DGA1, encoding diacylglycerol acyltransferase, and CAT2, encoding carnitine acetyltransferase, in combination with prior metabolic enhancements, boosted squalene production to 1381.4 mg/L in the engineered strain Po1g17. To enhance the supply of the precursor acetyl-CoA and inhibit downstream squalene conversion, we supplemented with 6 g/L pyruvic acid and 0.7 mg/L terbinafine, resulting in an overall squalene titer of 2594.1 mg/L. These advancements underscore the potential for sustainable, large-scale squalene production using Y. lipolytica cell factories, contributing to circular economy initiatives by valorizing waste materials.

RESUMEN

Environmental constraints associated with fossil fuels have driven researchers to find a novel, potential and environmentally benign alternative fuel. Biodiesel, vegetable oil, and alcohol have gained rapid momentum thanks to their renewable nature and comparable energy contents in recent years. Accordingly, a Ternary fuel blend is prepared comprising three fuels namely diesel, biodiesel, and pentanol. Waste cooking oil was identified as the source for biodiesel and Pentanol was chosen among various alcohol alternatives due to improved energy density, reduced toxicity. These are endorsed to the enhancement in surface area-volume ratio of nano additives which boosts the catalytic combustion activity and also causing lesser fuel to take part in combustion for maintaining a constant engine speed. The experimentation is done with ternaryfuel blends with varying pentanol and biodiesel concentrations of diesel, biodiesel and pentanol). Upon experimentation, it was observed that, ternary fuel blend 'TF' comprising 70% diesel, 20% biodiesel and 10% pentanol, yielded best performance and was used for doping of Alumina oxide (Al2O3) nano additives. The Al2O3 nanoparticles were doped with ternary blends at fractions of 10 ppm, 20 ppm, and 30 ppm. It was observed that 20 ppm Al2O3 nanoparticle blended TF blend improved BTE and lowered BSFC by about 12.01% and 22.57% respectively. The performance tremendously along with lowered the CO emission by 49.21%, HC emission by 18.91% and smoke opacity by 9.02%.

RESUMEN

Lignocellulosic biomass, renewable with short growth cycle and diverse sources, can be substituted fossil fuel. However, low effective hydrogen-to-carbon ratio (H/Ceff) limits its applications. Torrefaction and co-pyrolysis with high H/Ceff feedstocks are promising technology. This paper investigated the effect of heating modes on oil-bath torrefaction of walnut shells, followed by fast co-pyrolysis. Six heating modes during oil-bath torrefaction were evaluated. Com1 (Microwave 67 %, Lightwave 33 %) yielded the lowest residual yield 84 wt%, while the highest gas production 495.47 mL/g which mainly composed of CO and CO2. Torrefied feedstock under Com1 had the highest H/Ceff. Decarboxylation and decarbonylation reactions dominated among oil-bath torrefaction. Com1 produced the most hydrocarbons and least oxygen-containing compounds. As microwave ratio decreased, the content of olefins, acids and phenols decreased, monocyclic aromatic hydrocarbons and alcohols was showed opposite tend. This study offers new ideas for microwave and lightwave torrefaction and promoting hydrocarbon production from lignocellulosic biomass.

Asunto(s)

RESUMEN

The sustainable utilization of waste cooking oil (WCO) as an alternative to fossil fuels has gained considerable attention due to its potential for delivering substantial environmental and economic benefits. This research attempts to explore the impact of incorporating aluminum oxide nanoparticles (AONP) into WCO on the emissions, combustion characteristics, and overall performance of a single-cylinder compression ignition (CI) engine. Comparative analyses were conducted against conventional commercial diesel fuel and pure WCO, as well as varying blends of WCO with AONP at 25 ppm, 50 ppm, and 75 ppm concentrations. The experimental results demonstrate a notable enhancement in brake thermal efficiency (BTE), with a 13.2% increase observed in the WCO + 75 AONP fuel blend compared to neat WCO. Engines fueled by WCO nanoparticle blends showed significant augmentation in-cylinder pressure and heat release rates. Furthermore, these blends exhibited a substantial reduction in carbon monoxide (CO), hydrocarbons (HC), and soot emissions by 44%, 31%, and 48%, respectively, while nitrogen oxide (NO) emissions increased by 7% compared to neat WCO. Among the assessed fuel mixtures, the WCO + 75 AONP blend demonstrated higher engine performance. This study underscores the potential of aluminum oxide nanoparticle-enhanced WCO blends as viable and environmentally responsible options for sustainable energy solutions. However, challenges such as production costs and long-term fuel stability must be addressed to establish nano-fuels as financially viable alternatives.

RESUMEN

In pursuit of enhancing the mechanical properties, especially the tensile strength, of 4D-printable consumables derived from waste cooking oil (WCO), we initiated the production of acrylate-modified WCO, which encompasses epoxy waste oil methacrylate (EWOMA) and epoxy waste oil acrylate (EWOA). Subsequently, a series of WCO-based 4D-printable photocurable resins were obtained by introducing a suitable diacrylate molecule as the second monomer, coupled with a composite photoinitiator system comprising Irgacure 819 and p-dimethylaminobenzaldehyde (DMAB). These materials were amenable to molding using an LCD light-curing 3D printer. Our findings underscored the pivotal role of triethylene glycol dimethacrylate (TEGDMA) among the array of diacrylate molecules in enhancing the mechanical properties of WCO-based 4D-printable resins. Notably, the 4D-printable material, composed of EWOA and TEGDMA in an equal mass ratio, exhibited nice mechanical strength comparable to that of mainstream petroleum-based 4D-printable materials, boasting a tensile strength of 9.17 MPa and an elongation at break of 15.39%. These figures significantly outperformed the mechanical characteristics of pure EWOA or TEGDMA resins. Furthermore, the EWOA-TEGDMA resin demonstrated impressive thermally induced shape memory performance, enabling deformation and recovery at room temperature and retaining its shape at -60 °C. This resin also demonstrated favorable biodegradability, with an 8.34% weight loss after 45 days of soil degradation. As a result, this 4D-printable photocurable resin derived from WCO holds immense potential for the creation of a wide spectrum of high-performance intelligent devices, brackets, mold, folding structures, and personalized products.

RESUMEN

Biofuel production from waste cooking oil (WCO) offers an alternative to fossil fuels, especially for high-value bio-jet fuel. However, this industry is hindered by informal recyclers who covertly divert large amounts of WCO to illegal gutter oil production. Investigating the dynamic evolution of stakeholder behavior will help explore solutions. Thus, this study presents a tripartite evolutionary game model that includes the government, formal recyclers, and informal recyclers, aims to redesign the government intervention strategy to promote the directional flow of WCO from restaurant trash cans to bio-jet fuel production. We find that the evolutionary game model exists eight possible evolutionary stability strategies (ESSs), and the choice of each ESS depends mainly on the trade-off between costs and revenues for each stakeholder. The numerical study results reveal that formal recyclers are driven to carry out technological innovation by government support, profiting from bio-aviation kerosene products, and income from carbon emission reduction. These factors also have an indirect impact on the transformation of informal recyclers. Therefore, the government should provide adequate support for technological innovation to formal recyclers and increase their profitability of products to enable them to actively implement innovative strategies. This can be achieved by expanding the sales channels of bio-jet fuel products, implementing patent protection measures, and improving the carbon reduction trading mechanism. Furthermore, the government's high tax rate on formal recyclers and the significant profits earned by informal recyclers through illegal gutter oil production may dissuade them from transitioning their businesses. Above findings are in line with the actual issues of WCO recycling and provide a new dynamic decision-making method for enterprises and government managers.

RESUMEN

Ecofriendly and stable Fuel Microemulsions based on renewable components were prepared through solubilizing ethanol in diesel and waste cooking oil blend (4:1). New diquaternary ammonium ionic liquids (3a & 3b) were synthesized through a quaternization reaction of the synthesized dihaloester with diethyl ethanolamine tridecantrioate and triethyl amine tridecantrioate, respectively. The chemical structures were elucidated by NMR spectroscopy. It was observed from DLS analyses that the ethanol particles in all samples have sizes between 4.77 to 11.22 nm. The distribution becomes narrower with the decrease in the ionic liquid concentrations. The fuel properties fall within the ASTM D975 acceptable specifications and are close to the neat diesel properties. The Cetane index were 53 and 53.5, heating values were 38.5 and 38.5 MJ/kg, viscosities were 2.91 and 2.98 mm2/s, densities were 8.26 and 8.29 g/mL and flash points were 49 °C and 48 °C for 3a1 and 3b1 microemulsions, respectively. The particle sizes of samples were examined by DLS for 160 days and they were significantly stable. The amount of ethanol solubilized increases with the increase in the amount of the synthesized ionic liquids and cosurfactant. The combustion calculations pointed out that the microemulsions 3a1 and 3b1 need 13.07 kg air/kg fuel and 12.79 kg air/kg fuel, respectively, which are less than the air required to combust the pure diesel. According to theoretical combustion, using ionic liquids saves the air consumption required for combustion and reduces the quantities of combustion products. The prepared microemulsions were successfully used as a diesel substitute due to their improved combustion properties than pure diesel and low pollution levels.

RESUMEN

In this study, a cost-effective and stable heterogeneous acidic carbocatalyst (CZnLS950) derived from Na-lignosulfonate (LS), a side product of the paper industry, was employed to produce hydrocarbon fuels through the pyrolysis of waste cooking oil (WCO) and crude natural-oil extracted from sunflower seeds, aligning with the principles of the circular economy. To enhance its practicality in industrial settings, the catalyst was synthesized in pellet form, enabling easy separation from the biofuel produced during the reaction. CZnLS950 exhibited remarkable catalytic efficiency in the pyrolysis of WCO, resulting in a 71 wt. % liquid biofuel yield under mild conditions. This performance is attributed to the unique synthesis procedure of acidic carbocatalyst, which utilizes LS and nano ZnO (20 nm) to create a hierarchical pore structure with acidic properties (1.1 mmol of NH3 g-1). Stability and reusability of the carbocatalyst were evaluated, and the results showed excellent stability with small catalytic deactivation (~5 wt. %) after the fourth use. Attempts at distinct catalytic mechanisms for WCO and sunflower seeds crude natural-oil pyrolysis were provided to understand the processes involved in obtaining the two different biofuels produced. Overall, this study sets the stage for exploring Lignosulfonate-based materials to achieve renewable biofuel from recycling streams.

RESUMEN

Over 50 MioT of Waste Cooking Oil (WCO) was collected worldwide in 2020 from domestic and industrial activities, constituting a potential hazard for both water and land environments, and requiring appropriate disposal management strategies. In line with the principles of circular economy and eco-design, in this paper an innovative methodology for the valorisation of WCO as a rejuvenating agent for bitumen 50/70 coming from Reclaimed Asphalt Pavement (RAP) is reported. In particular, WCO or hydrolysed WCO (HWCO) was modified by transesterification or amidation reactions to achieve various WCO esters and amides. All samples were characterised by nuclear magnetic resonance, melting, and boiling point. Since rejuvenating agents for RAP Cold Mix Asphalt require a melting point ≤0 °C, only WCO esters could further be tested. Efficiency of WCO esters was assessed by means of the Asphaltenes Dispersant Test and the Heithaus Parameter. In particular, bitumen blends containing 25 wt% of WCO modified with 2-phenylethyl alcohol, showed high dispersing capacity in n-heptane even after a week, compared to bitumen alone (1 h). Additionally, the Heithaus Parameter of this bitumen blend was almost three times higher than bitumen alone, further demonstrating beneficial effects deriving from the use of WCO esters as rejuvenating agents.

RESUMEN

The use of waste polyethylene (WPE) in modified asphalt is frequently employed to reduce environmental pollution and improve asphalt properties. However, research has shown that using WPE alone as a modifier does not effectively enhance the low-temperature flexibility of asphalt. This study aims to investigate the potential of utilizing WPE and waste cooking oil (WCO) as composite modifiers to enhance the properties of virgin asphalt under both high and low-temperature conditions. The contents of WPE and WCO were used, and the preparation process for the modified asphalt was optimized through an orthogonal experiment. The experimental results indicate that the optimal formulation for the WPE/WCO composite modified asphalt (WPE/WCO-A) is obtained with an additive dosage of 8% and 1% by mass of virgin asphalt for WPE and WCO, respectively, as well as the maintenance process at a temperature of 140 °C and a duration of 2 h. Dynamic shear rheometer (DSR) results reveal that WPE/WCO composite modifier can greatly improve the high-temperature deformation resistance of asphalt. Bending beam rheometer (BBR) tests confirm that WPE adversely affects the low-temperature flexibility of asphalt, while the addition of WCO can improve it. WPE/WCO-A has even better low-temperature properties than virgin asphalt (VA). The Fourier transform infrared spectroscopy (FT-IR) results suggest that the composite modification of asphalt by WPE/WCO modifiers is dominated by physical action. Furthermore, the fluorescence microscopy test results demonstrate that WCO can promote WPE swelling in asphalt. This study offers a novel approach to improve the comprehensive properties of asphalt through composite modification using WPE and WCO.

Asunto(s)

RESUMEN

Catalytic pyrolysis technology proves to be a highly effective approach for waste cooking oil management. However, high-pressure drops and easy deactivation of powder catalysts hinder the industrialization of this technology. In this study, a bifunctional SiC ball (ZSM-5/SiC ball structured) catalyst was prepared to produce monocyclic aromatics. Bifunctional SiC ball catalyst demonstrates notable microwave-responsive properties and remarkable catalytic efficacy. Results showed that the content of monocyclic aromatics under BFSB catalysis with microwave heating was the highest. Weight hourly space velocity is no longer one of the main factors affecting microwave-assisted catalytic pyrolysis under bifunctional SiC ball catalyst. Monocyclic aromatics content did not decrease significantly and was still higher than 86% when space velocity increased from 30 h-1 to 360 h-1. The highest space velocity could only be 180 h-1 under Powder ZSM-5, and the content of the monocyclic aromatics dropped rapidly to 67.68%. Furthermore, even after five operating cycles, the content of monocyclic aromatics with bifunctional SiC ball catalyst continues to surpass the initial content observed with Powder ZSM-5 at 500 °C and 180 h-1. Related characterizations revealed that coking is the primary cause of catalyst deactivation for both catalyst types; however, the bifunctional SiC ball catalyst exhibits a 29.1% lower occurrence of polyaromatic coke formation compared to Powder ZSM-5.

Asunto(s)

RESUMEN

Organic waste valorization is one of the principal goals of the circular economy. Bioprocesses offer a promising approach to achieve this goal by employing microorganisms to convert organic feedstocks into high value products through their metabolic activities. In this study, a fermentation process for yeast cultivation and extracellular lipase production was developed by utilizing food waste. Lipases are versatile enzymes that can be applied in a wide range of industrial fields, from detergent, leather, and biodiesel production to food and beverage manufacturing. Among several oleaginous yeast species screened, Saitozyma flava was found to exhibit the highest secreted lipase activity on pNP-butyrate, pNP-caproate, and pNP-caprylate. The production medium was composed of molasses, a by-product of the sugar industry, which provided nutrients for yeast biomass formation. At the same time, waste cooking oil was employed to induce and enhance extracellular lipase production. After 48 h of process, 20 g/L of yeast biomass and 150 mU/mgdw of lipase activity were achieved, with a productivity of 3 mU/mgdw/h. The purified lipase from S. flava showed optimal performances at temperature 28°C and pH 8.0, exhibiting a specific activity of 62 U/mg when using p-NPC as substrate.

Asunto(s)

RESUMEN

The loss of active components, weak acid resistance, and low recover efficiency of common Ca-based catalysts limited its further development and application. In this study, to effectively produce biodiesel from waste cooking oil (WCO), a green and recyclable magnetic acid-base bifunctional CoFe/biochar/CaO catalyst was prepared from sargassum and river snail shell waste via hydrothermal method. The catalysts' structure and properties were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2/NH3 temperature programmed desorption (CO2/NH3 TPD), etc., The prepared catalyst mainly consisted of the carbon skeleton, CoFe alloy, and CaO. CoFe alloy provided catalyst's ferromagnetism for magnetic separation as well as acid sites for transesterification of WCO. Ca and other metal species with nanoscale (∼5.64 nm) were dispersively anchored on sargassum biochar surface, thereby leading to good catalytic activity (99.21% biodiesel yield) and stability (91.70% biodiesel yield after the 5th cycle). In addition, response surface methodology-Box-Behnken design (RSM-BBD) revealed the optimal operational conditions were 16:1 methanol/oil molar ratio, 3 wt% catalyst dosage, 73 °C for 157 min. The maximum biodiesel yield predicted value was 98.29% and the experimental value was 99.21%, indicating good satisfaction of the established model. Moreover, the quality of WCO biodiesel met the ASTM D6751 standards. This study benefits magnetic waste-derived acid-base bifunctional catalysts for the disposal of WCO towards sustainable biodiesel production.

Asunto(s)

RESUMEN

Anaerobic digestion of wastes and wastewater is a complex process that can be affected by many operational parameters. In this context, the purpose of the present study was to optimize biogas production using crude glycerol (GLY) generated in biodiesel production from waste cooking oil without pretreatment or nutrient supplementation. The study was divided into two parts: the first phase consisted of an experimental design based on central composite design (CCD) with two variables (food to microorganism (F/M) ratio and cycle time) at five levels (F/M of 0.20; 0.51; 1.02; 1.53 and 2.04 gCOD/gVS; tc of 3, 4, 5, 6, 7 days) focusing on optimizing the biogas production from crude GLY in lab-scale batch reactors (500 mL). The second phase was conducted on a pilot-scale biodigester (1.2 m3) based on the optimized variables obtained from the CCD. The optimized results showed that the F/M ratio of 2.04 gCOD/gVS and a cycle time (tc) of 6 days reached the highest specific methane production (SMP) of 46 LCH4/kgVS. However, the highest SMP of 14.7 LCH4/kgVSd was obtained during the operation of the pilot-scale biodigester for the optimized conditions of F/M ratio of 0.23 gCOD/gSV and a tc of 7 days. Therefore, pilot-scale biogas production from crude GLY was demonstrated to be feasible without the use of nutrients or GLY pretreatment at 0.15 LGLY/m3 d.

Asunto(s)