RESUMEN
This paper presents a compact, crossed-polarized, ultra-wideband (UWB) four-ports multiple-input-multiple-output (MIMO) printed antenna. The proposed antenna is constructed from four microstrip circular patch elements fed by a 50-Ω microstrip line. Two metamaterial cell elements, in the form of a rectangular concentric double split ring resonator (SRR), are placed at the upper plane of the substrates for bandwidth improvement and isolation enhancement. The ultra-wideband frequency response is achieved using a defective ground plane. Surface current flow between the antenna's four elements is limited to ensure maximum isolation. The four-port MIMO system is designed with orthogonal antenna elements orientation on an FR4 substrate with a loss tangent of 0.02 and an overall size of 30 mm × 30 mm × 1.6 mm. Such orientation resulted in less than -17dB port-to-port isolation and an impedance bandwidth of 148% (3.1-12 GHz). The proposed UWB-MIMO antenna achieved a maximum realized gain of 6.2dBi with an efficiency of 87%. The measured and simulated results are in good agreement over the operating frequency band (3.1-12 GHz). The results also provide overall good diversity performance with the TARC < -10 dB, ECC < 0.001, DG > 9.9, MEG < -3 dB and CCL <0.1. The proposed antenna is well-suited for applications in WLAN, WIMAX and GPRs.
RESUMEN
In this article, very compact 2 × 2 and 4 × 4 MIMO (Multiple-Input and Multiple output) antennas are designed with the help of Characteristics Mode Analysis to enhance isolation between the elements for UWB applications. The proposed antennas are designed with Characteristic Mode Analysis (CMA) to gain physical insight and also to analyze the dominant mode. To improve isolation and minimize the mutual coupling between radiating elements, elliptical shaped stubs are used. The dimensions of the 2 × 2 and 4 × 4 MIMO antennas are 0.29λ0 × 0.21λ0 (28 × 20 mm2) and 0.29λ0 × 0.42λ0 (28 × 40 mm2), respectively. These antennas cover the (3.1 GHz-13.75 GHz) UWB frequency band and maintain remarkable isolation of more than 25 dB for both 2 × 2 and 4 × 4 antennas. The impedance bandwidth of the proposed 4 × 4 MIMO antenna is 126.40% from 3.1 GHz to 13.75 GHz, including X-Band and ITU bands. The proposed 4 × 4 antenna has good radiation efficiency, with a value of more than 92.5%. The envelope correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), and channel capacity loss (CCL) matrices of the 4 × 4 antenna are simulated and tested. The corresponding values are 0.0045, 9.982, -3.1 dB, and 0.39, respectively. The simulated results are validated with measured results and favorable agreements for both the 2 × 2 and 4 × 4 UWB-MIMO antennas.
RESUMEN
This paper presents the performance improvement of a co-planar waveguide rectangularly notched UWB-MIMO antenna. The isolation and gain of the antenna are enhanced by using a parasitic isolator. The antenna consists of four microstrip patch antennas and an isolator. The UWB characteristic of the antenna is achieved by truncating the lower ends of the radiating patch by a semicircle. The rectangular notch characteristic is obtained by adding two electromagnetic bandgap structures on the backside of the antenna, which is attached to the radiator via shorting pin. The performance, especially the decoupling of the MIMO antenna is improved by using a novel parasitic decoupler, which is placed between the antennas to receive uncorrelated signals. The decoupling structure consists of a square shape metallic element with a circular slot inside and a half-semicircle slot edged at each corner. Four rectangular metallic stubs are extended from opposite parallel sides to improve further isolation. The simulated and measured results show that the antenna has a rectangular notch band (5.25-5.85 GHz) across the working band of 3-12.8 GHz. In addition, the antenna has a planar structure with an overall size of 60 × 60 × 1.52 mm3 and offers stable gain, reduced mutual coupling (<-21 dB), and lower envelop correlation (<0.001).