RESUMEN

Complementation remains a foundation for demonstrating molecular Koch's postulates. While this is frequently achieved using plasmids, limitations such as increased gene copy number and the need for antibiotic supplementation to avoid plasmid loss can restrict their use. Chromosomal integration systems using the Tn7 transposon provide an alternative to plasmids for complementation and facilitate the stable insertion of genes at the chromosomal attTn7 site without the need for selection pressure. Here, we enhanced the utility of mini-Tn7 insertion vectors by the addition of inducible (Pcym) and constitutive (PcL and PrpsM) promoters, allowing differential transcriptional control of genes integrated into the chromosome. We validated the utility of these promoters by cloning the gfp gene, encoding green fluorescent protein, downstream of each promoter and integrating a mini-Tn7 construct harboring these elements into the attTn7 site on the chromosome of the Escherichia coli K-12 strain MG1655. The PcL and PrpsM promoters provided equivalent levels of GFP expression and offered flexibility based on the target host strain. Activation of the tightly regulated Pcym promoter with its inducer cumate resulted in tunable expression of GFP in a dose-dependent manner. We further demonstrated the tight control of the Pcym promoter using the toxic impCAB genes, and the expression of which is detrimental to E. coli viability. Together, these modified mini-Tn7 vectors allowing differential control of genes integrated into the chromosome at a conserved site offer an efficient system for complementation where plasmid use is restricted.IMPORTANCEChromosomal integration using mini-Tn7 vectors provides an efficient means to insert genes into the chromosome of many gram-negative bacteria. Insertion occurs at a conserved site and allows for the stable integration of genes in single copy. While this system has multiple benefits for enabling complementation, a cornerstone for fulfilling molecular Koch's postulates, greater flexibility for controlled gene expression would enhance its utility. Here, we have added to the function of mini-Tn7 vectors by the addition of inducible and constitutive promoters and demonstrated their capacity to drive the controlled expression of target genes integrated into the chromosome. In addition to complementation, these modified vectors offer broad application for other approaches including chromosomal tagging, in vivo expression, metabolic engineering, and synthetic biology.

RESUMEN

Gene expression systems that transcend species barriers are needed for cross-species analysis of gene function. In particular, expression systems that can be utilized in both model and pathogenic bacteria underpin comparative functional approaches that inform conserved and variable features of bacterial physiology. In this study, we develop replicative and integrative vectors alongside a novel, IPTG-inducible promoter that can be used in the model bacterium Escherichia coli K-12 as well as strains of the antibiotic-resistant pathogen, Acinetobacter baumannii. We generate modular vectors that transfer by conjugation at high efficiency and either replicate or integrate into the genome, depending on design. Embedded in these vectors, we also developed a synthetic, IPTG-inducible promoter, PabstBR, that induces to a high level but is less leaky than the commonly used trc promoter. We show that PabstBR is titratable at both the population and single-cell levels, regardless of species, highlighting the utility of our expression systems for cross-species functional studies. Finally, as a proof of principle, we use our integrating vector to develop a reporter for the E. coli envelope stress σ factor, RpoE, and deploy the reporter in E. coli and A. baumannii, finding that A. baumannii does not recognize RpoE-dependent promoters unless RpoE is heterologously expressed. We envision that these vector and promoter tools will be valuable for the community of researchers who study the fundamental biology of E. coli and A. baumannii.IMPORTANCEAcinetobacter baumannii is a multidrug-resistant, hospital-acquired pathogen with the ability to cause severe infections. Understanding the unique biology of this non-model bacterium may lead to the discovery of new weaknesses that can be targeted to treat antibiotic-resistant infections. In this study, we provide expression tools that can be used to study the gene function in A. baumannii, including in drug-resistant clinical isolates. These tools are also compatible with the model bacterium, Escherichia coli, enabling cross-species comparisons of gene function. We anticipate that the use of these tools by the scientific community will accelerate our understanding of Acinetobacter biology.

RESUMEN

The Tn7 family of transposons is notable for its highly regulated integration mechanisms, including programmable RNA-guided transposition. The targeting pathways rely on dedicated target selection proteins from the TniQ family and the AAA+ adaptor TnsC to recruit and activate the transposase at specific target sites. Here, we report the cryoelectron microscopy (cryo-EM) structures of TnsC bound to the TniQ domain of TnsD from prototypical Tn7 and unveil key regulatory steps stemming from unique behaviors of ATP- versus ADP-bound TnsC. We show that TnsD recruits ADP-bound dimers of TnsC and acts as an exchange factor to release one protomer with exchange to ATP. This loading process explains how TnsC assembles a heptameric ring unidirectionally from the target site. This unique loading process results in functionally distinct TnsC protomers within the ring, providing a checkpoint for target immunity and explaining how insertions at programmed sites precisely occur in a specific orientation across Tn7 elements.

Asunto(s)

RESUMEN

Gene expression systems that transcend species barriers are needed for cross-species analysis of gene function. In particular, expression systems that can be utilized in both model and pathogenic bacteria underpin comparative functional approaches that inform conserved and variable features of bacterial physiology. Here, we develop replicative and integrative vectors alongside a novel, IPTG-inducible promoter that can be used in the model bacterium Escherichia coli K-12 as well as strains of the antibiotic-resistant pathogen, Acinetobacter baumannii. We generate modular vectors that transfer by conjugation at high efficiency and either replicate or integrate into the genome, depending on design. Embedded in these vectors, we also developed a synthetic, IPTG-inducible promoter, P abstBR , that induces to a high level, but is less leaky than the commonly used trc promoter. We show that P abstBR is titratable at both the population and single cell level, regardless of species, highlighting the utility of our expression systems for cross-species functional studies. Finally, as a proof of principle, we use our integrating vector to develop a reporter for the E. coli envelope stress σ factor, RpoE, and deploy the reporter in E. coli and A. baumannii, finding that A. baumannii does not recognize RpoE-dependent promoters unless RpoE is heterologously expressed. We envision that these vector and promoter tools will be valuable for the community of researchers that study fundamental biology of E. coli and A. baumannii.

RESUMEN

BACKGROUND: After two decades of extensive microbiome research, the current forefront of scientific exploration involves moving beyond description and classification to uncovering the intricate mechanisms underlying the coalescence of microbial communities. Deciphering microbiome assembly has been technically challenging due to their vast microbial diversity but establishing a synthetic community (SynCom) serves as a key strategy in unravelling this process. Achieving absolute quantification is crucial for establishing causality in assembly dynamics. However, existing approaches are primarily designed to differentiate a specific group of microorganisms within a particular SynCom. RESULTS: To address this issue, we have developed the differential fluorescent marking (DFM) strategy, employing three distinguishable fluorescent proteins in single and double combinations. Building on the mini-Tn7 transposon, DFM capitalises on enhanced stability and broad applicability across diverse Proteobacteria species. The various DFM constructions are built using the pTn7-SCOUT plasmid family, enabling modular assembly, and facilitating the interchangeability of expression and antibiotic cassettes in a single reaction. DFM has no detrimental effects on fitness or community assembly dynamics, and through the application of flow cytometry, we successfully differentiated, quantified, and tracked a diverse six-member SynCom under various complex conditions like root rhizosphere showing a different colonisation assembly dynamic between pea and barley roots. CONCLUSIONS: DFM represents a powerful resource that eliminates dependence on sequencing and/or culturing, thereby opening new avenues for studying microbiome assembly. Video Abstract.

Asunto(s)

RESUMEN

A Tn7-transposition approach was utilized for site-specific insertion of foreign genes into the genome of simian varicella virus (SVV), the causative agent of simian varicella in nonhuman primates. The severe acute respiratory syndrome coronavirus (SARS-CoV-2) nucleocapsid (N) gene and receptor binding domain (RBD) of the spike gene were inserted into the ORF 14 region of the SVV genome cloned into a bacterial artificial chromosome and then transfected into Vero cells to generate the infectious recombinant SVV (rSVV). The rSVV replicated efficiently in infected Vero cells and expressed the N and RBD antigens as indicated by immunoblot and immunofluorescence assays. Tn7-mediated transposition provides a rapid and efficient method for constructing rSVVs which may be evaluated as live-attenuated vaccines.

Asunto(s)

RESUMEN

Acanthamoeba species are clinically relevant free-living amoebae (FLA) ubiquitously found in soil and water bodies. Metabolically active trophozoites graze on diverse microbes via phagocytosis. However, functional studies on Rab GTPases (Rabs), which are critical for controlling vesicle trafficking and maturation, are scarce for this FLA. This knowledge gap can be partly explained by the limited genetic tools available for Acanthamoeba cell biology. Here, we developed plasmids to generate fusions of A. castellanii strain Neff proteins to the N- or C-termini of mEGFP and mCherry2. Phylogenomic and structural analyses of the 11 Neff Rab7 paralogs found in the RefSeq assembly revealed that eight of them had non-canonical sequences. After correcting the gene annotation for the Rab7A ortholog, we generated a line stably expressing an mEGFP-Rab7A fusion, demonstrating its correct localization to acidified macropinocytic and phagocytic vacuoles using fluorescence microscopy live cell imaging (LCI). Direct labeling of live Stenotrophomonas maltophilia ESTM1D_MKCAZ16_6a (Sm18) cells with pHrodo Red, a pH-sensitive dye, demonstrated that they reside within acidified, Rab7A-positive vacuoles. We constructed new mini-Tn7 delivery plasmids and tagged Sm18 with constitutively expressed mScarlet-I. Co-culture experiments of Neff trophozoites with Sm18::mTn7TC1_Pc_mScarlet-I, coupled with LCI and microplate reader assays, demonstrated that Sm18 underwent multiple replication rounds before reaching the extracellular medium via non-lytic exocytosis. We conclude that S. maltophilia belongs to the class of bacteria that can use amoeba as an intracellular replication niche within a Stenotrophomonas-containing vacuole that interacts extensively with the endocytic pathway.IMPORTANCEDiverse Acanthamoeba lineages (genotypes) are of increasing clinical concern, mainly causing amoebic keratitis and granulomatous amebic encephalitis among other infections. S. maltophilia ranks among the top 10 most prevalent multidrug-resistant opportunistic nosocomial pathogens and is a recurrent member of the microbiome hosted by Acanthamoeba and other free-living amoebae. However, little is known about the molecular strategies deployed by Stenotrophomonas for an intracellular lifestyle in amoebae and other professional phagocytes such as macrophages, which allow the bacterium to evade the immune system and the action of antibiotics. Our plasmids and easy-to-use microtiter plate co-culture assays should facilitate investigations into the cellular microbiology of Acanthamoeba interactions with Stenotrophomonas and other opportunistic pathogens, which may ultimately lead to the discovery of new molecular targets and antimicrobial therapies to combat difficult-to-treat infections caused by these ubiquitous microbes.

Asunto(s)

RESUMEN

Introduction: Burkholderia is a rod-shaped aerobic Gram-negative bacteria with considerable genetic and metabolic diversity, which can beused for bioremediation and production applications, and has great biotechnology potential. However, there are few studies on the heavy metal resistance of the Burkholderia genus. Methods: In this paper, the distribution, characteristics and evolution of heavy metal resistance genes in Burkholderia and the gene island of Tn7-like transposable element associated with heavy metal resistance genes in Burkholderia were studied by comparative genomic method based on the characteristics of heavy metal resistance. Results and discussion: The classification status of some species of the Burkholderia genus was improved, and it was found that Burkholderia dabaoshanensis and Burkholderia novacaledonica do not belong to the Burkholderia genus.Secondly, comparative genomics studies and pan-genome analysis found that the core genome of Burkholderia has alarger proportion of heavy metal resistance genes and a greater variety of heavy metalresistance genes than the subsidiary genome and strain specific genes. Heavy metal resistance genes are mostly distributed in the genome in the form of various gene clusters (for example, mer clusters, ars clusters, czc/cusABC clusters). At the same time, transposase, recombinase, integrase and other genes were foundupstream and downstream of heavy metal gene clusters, indicating that heavy metal resistance genes may beobtained through horizontal transfer. The analysis of natural selection pressure of heavy metal resistance genes showed that heavy metal resistance genes experienced strong purification selection under purification selection pressure in the genome.The Tn7 like transposable element of Burkholderia was associated with the heavy metal resistance gene island, and there were a large number of Tn7 transposable element insertion events in genomes. At the same time, BGI metal gene islands related to heavy metal resistance genes of Tn7 like transposable element were found, and these gene islands were only distributed in Burkholderia cepacia, Burkholderia polyvora, and Burkholderia contaminant.

RESUMEN

Tn7-like transposons have co-opted CRISPR-Cas systems to facilitate the movement of their own DNA. These CRISPR-associated transposons (CASTs) are promising tools for programmable gene knockin. A key feature of CASTs is their ability to recruit Tn7-like transposons to nuclease-deficient CRISPR effectors. However, how Tn7-like transposons are recruited by diverse CRISPR effectors remains poorly understood. Here, we present the cryo-EM structure of a recruitment complex comprising the Cascade complex, TniQ, TnsC, and the target DNA in the type I-B CAST from Peltigera membranacea cyanobiont 210A. Target DNA recognition by Cascade induces conformational changes in Cas6 and primes TniQ recruitment through its C-terminal domain. The N-terminal domain of TniQ is bound to the seam region of the TnsC spiral heptamer. Our findings provide insights into the diverse mechanisms for the recruitment of Tn7-like transposons to CRISPR effectors and will aid in the development of CASTs as gene knockin tools.

Asunto(s)

RESUMEN

CRISPR-associated transposons (CASTs) co-opt CRISPR-Cas proteins and Tn7-family transposons for RNA-guided vertical and horizontal transmission. CASTs encode minimal CRISPR arrays but can't acquire new spacers. Here, we show that CASTs instead co-opt defense-associated CRISPR arrays for horizontal transmission. A bioinformatic analysis shows that all CAST sub-types co-occur with defense-associated CRISPR-Cas systems. Using an E. coli quantitative transposition assay, we show that CASTs use CRISPR RNAs (crRNAs) from these defense systems for horizontal gene transfer. A high-resolution structure of the type I-F CAST-Cascade in complex with a type III-B crRNA reveals that Cas6 recognizes direct repeats via sequence-independent π - π interactions. In addition to using heterologous CRISPR arrays, type V CASTs can also transpose via a crRNA-independent unguided mechanism, even when the S15 co-factor is over-expressed. Over-expressing S15 and the trans-activating CRISPR RNA (tracrRNA) or a single guide RNA (sgRNA) reduces, but does not abrogate, off-target integration for type V CASTs. Exploiting new spacers in defense-associated CRISPR arrays explains how CASTs horizontally transfer to new hosts. More broadly, this work will guide further efforts to engineer the activity and specificity of CASTs for gene editing applications.

RESUMEN

CRISPR-associated transposons (CASTs) are natural RNA-directed transposition systems. We demonstrate that transposon protein TniQ plays a central role in promoting R-loop formation by RNA-guided DNA-targeting modules. TniQ residues, proximal to CRISPR RNA (crRNA), are required for recognizing different crRNA categories, revealing an unappreciated role of TniQ to direct transposition into different classes of crRNA targets. To investigate adaptations allowing CAST elements to utilize attachment sites inaccessible to CRISPR-Cas surveillance complexes, we compared and contrasted PAM sequence requirements in both I-F3b CAST and I-F1 CRISPR-Cas systems. We identify specific amino acids that enable a wider range of PAM sequences to be accommodated in I-F3b CAST elements compared with I-F1 CRISPR-Cas, enabling CAST elements to access attachment sites as sequences drift and evade host surveillance. Together, this evidence points to the central role of TniQ in facilitating the acquisition of CRISPR effector complexes for RNA-guided DNA transposition.

Asunto(s)

RESUMEN

To spread, transposons must integrate into target sites without disruption of essential genes while avoiding host defense systems. Tn7-like transposons employ multiple mechanisms for target-site selection, including protein-guided targeting and, in CRISPR-associated transposons (CASTs), RNA-guided targeting. Combining phylogenomic and structural analyses, we conducted a broad survey of target selectors, revealing diverse mechanisms used by Tn7 to recognize target sites, including previously uncharacterized target-selector proteins found in newly discovered transposable elements (TEs). We experimentally characterized a CAST I-D system and a Tn6022-like transposon that uses TnsF, which contains an inactivated tyrosine recombinase domain, to target the comM gene. Additionally, we identified a non-Tn7 transposon, Tsy, encoding a homolog of TnsF with an active tyrosine recombinase domain, which we show also inserts into comM. Our findings show that Tn7 transposons employ modular architecture and co-opt target selectors from various sources to optimize target selection and drive transposon spread.

Asunto(s)

RESUMEN

Fluorescently labeled bacterial cells have become indispensable for many aspects of microbiological research, including studies on biofilm formation as an important virulence factor of various opportunistic bacteria of environmental origin such as Stenotrophomonas maltophilia. Using a Tn7-based genomic integration system, we report the construction of improved mini-Tn7 delivery plasmids for labeling of S. maltophilia with sfGFP, mCherry, tdTomato and mKate2 by expressing their codon-optimized genes from a strong, constitutive promoter and an optimized ribosomal binding site. Transposition of the mini-Tn7 transposons into single neutral sites located on average 25 nucleotides downstream of the 3'-end of the conserved glmS gene of different S. maltophilia wild-type strains did not have any adverse effects on the fitness of their fluorescently labeled derivatives. This was demonstrated by comparative analyses of growth, resistance profiles against 18 antibiotics of different classes, the ability to form biofilms on abiotic and biotic surfaces, also independent of the fluorescent protein expressed, and virulence in Galleria mellonella. It is also shown that the mini-Tn7 elements remained stably integrated in the genome of S. maltophilia over a prolonged period of time in the absence of antibiotic selection pressure. Overall, we provide evidence that the new improved mini-Tn7 delivery plasmids are valuable tools for generating fluorescently labeled S. maltophilia strains that are indistinguishable in their properties from their parental wild-type strains. IMPORTANCE The bacterium S. maltophilia is an important opportunistic nosocomial pathogen that can cause bacteremia and pneumonia in immunocompromised patients with a high rate of mortality. It is now considered as a clinically relevant and notorious pathogen in cystic fibrosis patients but has also been isolated from lung specimen of healthy donors. The high intrinsic resistance to a wide range of antibiotics complicates treatment and most likely contributes to the increasing incidence of S. maltophilia infections worldwide. One important virulence-related trait of S. maltophilia is the ability to form biofilms on any surface, which may result in the development of increased transient phenotypic resistance to antimicrobials. The significance of our work is to provide a mini-Tn7-based labeling system for S. maltophilia to study the mechanisms of biofilm formation or host-pathogen interactions with live bacteria under non-destructive conditions.

Asunto(s)

RESUMEN

Acinetobacter baumannii is an opportunistic pathogen that has become difficult to eradicate mainly because of its high level of antibiotic resistance. Other features that contribute to this organism's success are the ability to compete for nutrients and iron. Recently, several novel Tn7-family transposons that encode synthesis and transport of siderophore and iron uptake systems were characterised. Here, another Tn7-type transposon (named Tn6553) is described. Tn6553 contains a set of iron utilisation genes with a transposition module related to Tn7. Tn7-family transposons that carry iron uptake systems facilitate the spread of these functions in Acinetobacter strains. Given that Tn7 is known to transpose efficiently into its preferred target site, finding siderophore functions on Tn7 family transposons is important in the context of dissemination of virulence genes amongst Acinetobacter strains.

Asunto(s)

RESUMEN

Horizontal gene transfer is an important mechanism in bacterial evolution and can occur at striking frequencies when mediated by mobile genetic elements. Conjugative plasmids are mobile genetic elements that are main drivers of horizontal transfer and a major facilitator in the spread of antibiotic resistance genes. However, conjugative plasmid models that readily can be genetically modified with the aim to study horizontal transfer are not currently available. The aim of this study was to develop a conjugative plasmid model where the insertion of gene cassettes such as reporter genes (e.g., fluorescent proteins) or antibiotic resistance genes would be efficient and convenient. Here, we introduced a single attTn7 site into the conjugative broad-host-range IncP-1 plasmid pKJK5 in a non-disruptive manner. Furthermore, a version with lower transfer rate and a non-conjugative version of pKJK5-attTn7 were also constructed. The advantage of having the attTn7 sites is that genes of interest can be introduced in a single step with very high success rate using the Tn7 transposition system. In addition, larger genetic fragments can be inserted. To illustrate the efficacy of the constructed pKJK5 plasmids, they were complemented with sfGFP (a gene encoding superfolder green fluorescent protein) in addition to seven different ß-lactamase genes representing the four known classes of ß-lactamases.

Asunto(s)

RESUMEN

Tn7 is a bacterial transposon with relatives containing element-encoded CRISPR-Cas systems mediating RNA-guided transposon insertion. Here, we present the 2.7 Å cryoelectron microscopy structure of prototypic Tn7 transposase TnsB interacting with the transposon end DNA. When TnsB interacts across repeating binding sites, it adopts a beads-on-a-string architecture, where the DNA-binding and catalytic domains are arranged in a tiled and intertwined fashion. The DNA-binding domains form few base-specific contacts leading to a binding preference that requires multiple weakly conserved sites at the appropriate spacing to achieve DNA sequence specificity. TnsB binding imparts differences in the global structure of the protein-bound DNA ends dictated by the spacing or overlap of binding sites explaining functional differences in the left and right ends of the element. We propose a model of the strand-transfer complex in which the terminal TnsB molecule is rearranged so that its catalytic domain is in a position conducive to transposition.

Asunto(s)

RESUMEN

OBJECTIVES: The aim of this study was to characterise the whole genome sequence of multidrug resistance (MDR) Salmonella Rissen strain SCSW714 of swine origin. METHODS: The whole genome of SCSW714 was sequenced using the Illumina Hiseq platform combined with the Nanopore PromethION platform and assembled by software Unicycler. NCBI Prokaryotic Genome Annotation Pipeline was used to annotate the genome of SCSW714. The sequence type (ST) as well as antimicrobial resistance genes were determined by MLST 2.0 and ResFinder 4.1, respectively. RESULTS: The chromosome of SCSW714 was 4 928 262 bp in size with a GC content of 52.1%. Strain SCSW714 contained a total of 4759 genes, including 4531 protein-coding sequences, 108 pseudogenes and 120 RNAs. It belonged to ST469 and carried six resistance genes including tet(A), dfrA12, sul3, aadA2, aadA1 and blaTEM-1b. All of the six resistance genes were carried by a novel MDR Tn7-pco-sil transposon designated as Tn6777. Tn6777 was stable in S. Rissen and could be excised from S. Rissen chromosome. CONCLUSION: We report a complete genome sequence of S. Rissen and characterised a novel MDR Tn7-like pco- and sil-containing transposon for the first time. The excision of Tn6777 suggests that Tn6777 has functional activity and may promote the co-spreading of metal and antimicrobial resistance genes. The complete genome sequence of S. Rissen strain SCSW714 provides valuable information for tracing the potential spread from swine to humans.

Asunto(s)

RESUMEN

Canonical CRISPR-Cas systems utilize RNA-guided nucleases for targeted cleavage of foreign nucleic acids, whereas some nuclease-deficient CRISPR-Cas complexes have been repurposed to direct the insertion of Tn7-like transposons. Here, we established a bioinformatic and experimental pipeline to comprehensively explore the diversity of Type I-F CRISPR-associated transposons. We report DNA integration for 20 systems and identify a highly active subset that exhibits complete orthogonality in transposon DNA mobilization. We reveal the modular nature of CRISPR-associated transposons by exploring the horizontal acquisition of targeting modules and by characterizing a system that encodes both a programmable, RNA-dependent pathway, and a fixed, RNA-independent pathway. Finally, we analyzed transposon-encoded cargo genes and found the striking presence of anti-phage defense systems, suggesting a role in transmitting innate immunity between bacteria. Collectively, this study substantially advances our biological understanding of CRISPR-associated transposon function and expands the suite of RNA-guided transposases for programmable, large-scale genome engineering.

Asunto(s)

RESUMEN

OBJECTIVES: This study aimed to clarify the characteristics of Tn7-derivatives transposons in MDR Proteus mirabilis strains isolated from anal swabs of chicken and swine in China from 2015-2020. METHODS: The Tn7 tnsA gene was screened in 207 P. mirabilis isolates by polymerase chain reaction (PCR). These strains were subjected to antimicrobial susceptibility testing. Illumina Hiseq (200 × coverage) was used for genome sequencing. Transposon maps were completed by PCR and Sanger sequencing and analysed by BLAST. RESULTS: The Tn7 tnsA gene was detected in 21 strains by PCR. Eight novel Tn7-derivatives, named Tn6667, Tn6668, Tn6669, Tn6670, Tn7095, Tn7096, Tn7097 and Tn7098, were characterised. Three types of hybrid class 2/1 integrons were found at the right end of Tn7 derivatives. A novel Tn7-like transposon Tn6666 with an active integrase gene intI2, whose transposition module shows 93% nucleotide identity to the corresponding region of Tn7, was characterised in three strains. Tn6666 is also found next to Tn7097 or Tn7098 in the chromosomes of two clonally related P. mirabilis strains. The number of resistance genes carried by the novel transposons varied from 1 to 18. A novel variant of class A extended-spectrum beta-lactamase gene, blaPER-16, with eight base substitutions compared with blaPER-12, was harboured by Tn7098. CONCLUSION: Our study characterised diverse novel Tn7-derivatives and a new Tn7-like transposon in P. mirabilis. An active integrase gene intI2 might promote the diversification of Tn7-like transposons. More attention should be paid to the prevalence and evolution of Tn7-derivatives and Tn7-like transposons and antimicrobial resistance genes they carry.

Asunto(s)

RESUMEN

Transposition is a major mechanism of horizontal gene mobility in prokaryotes. However, exploration of the genes mobilized by transposons (cargo) is hampered by the difficulty in delineating integrated transposons from their surrounding genetic context. Here, we present a computational approach that allowed us to identify the boundaries of 6,549 Tn7-like transposons. We found that 96% of these transposons carry at least one cargo gene. Delineation of distinct communities in a gene-sharing network demonstrates how transposons function as a conduit of genes between phylogenetically distant hosts. Comparative analysis of the cargo genes reveals significant enrichment of mobile genetic elements (MGEs) nested within Tn7-like transposons, such as insertion sequences and toxin-antitoxin modules, and of genes involved in recombination, anti-MGE defense, and antibiotic resistance. More unexpectedly, cargo also includes genes encoding central carbon metabolism enzymes. Twenty-two Tn7-like transposons carry both an anti-MGE defense system and antibiotic resistance genes, illustrating how bacteria can overcome these combined pressures upon acquisition of a single transposon. This work substantially expands the distribution of Tn7-like transposons, defines their evolutionary relationships, and provides a large-scale functional classification of prokaryotic genes mobilized by transposition. IMPORTANCE Transposons are major vehicles of horizontal gene transfer that, in addition to genes directly involved in transposition, carry cargo genes. However, characterization of these genes is hampered by the difficulty of identification of transposon boundaries. We developed a computational approach for detecting transposon ends and applied it to perform a comprehensive census of the cargo genes of Tn7-like transposons, a large class of bacterial mobile genetic elements (MGE), many of which employ a unique, CRISPR-mediated mechanism of site-specific transposition. The cargo genes encompass a striking diversity of MGE, defense, and antibiotic resistance systems. Unexpectedly, we also identified cargo genes encoding metabolic enzymes. Thus, Tn7-like transposons mobilize a vast repertoire of genes that can have multiple effects on the host bacteria.

Asunto(s)