RESUMEN

Thermostable protein folds of natural and synthetic origin are highly sought-after templates for biocatalyst generation due to their enhanced stability to elevated temperatures which overcomes one of the major limitations of applying enzymes for synthesis. Cytochrome P450 enzymes (CYPs) are a family of heme-thiolate monooxygenases that catalyse the oxidation of their substrates in a highly stereo- and regio-selective manner. The CYP enzyme (CYP107PQ1) from the thermophilic bacterium Meiothermus ruber binds the norisoprenoid ß-ionone and was employed as a scaffold for catalyst design. The I-helix was modified to convert this enzyme from a monooxygenase into a peroxygenase (CYP107PQ1QE), enabling the enantioselective oxidation of ß-ionone to (S)-4-hydroxy-ß-ionone (94% e.e.). The enzyme was resistant to 20 mM H2O2, 20% (v/v) of organic solvent, supported over 1700 turnovers and was fully functional after incubation at 60 °C for 1 h and 30 °C for 365 days. The reaction was scaled-up to generate multi milligram quantities of the product for characterisation. Overall, we demonstrate that sourcing a CYP protein fold from an extremophile enabled the design of a highly stable enzyme for stereoselective C-H bond activation only using H2O2 as the oxidant, providing a viable strategy for future biocatalyst design.

RESUMEN

Lysozymes have gained attention for their antiseptic properties. In silico studies have shown that the enzyme containing lysM can act as an antibacterial agent. Binding of the lysM motif of rSELys to peptidoglycan and molecular dynamics simulations showed that the protein-ligand binding is very stable. rSELys (2016 bp) is a new recombinant glycoside hydrolase from the thermophilic bacterium Cohnella sp. A01 (PTCC number: 1921). Protein expression and purification, a single band with an apparent molecular weight of ∼74 kDa was observed by SDS-PAGE. The kinetic parameters were Km 1.163 mg/ml, Vmax 670.3 U/mg, kcat 1675.75 (S-1), and kcat/Km 1440.88 (M-1S-1). Its optimum temperature was 55 °C and pH 8. Temperature stability also showed that the temperature of 50-60 °C retained more than half of its activity after 90 min. Based on the results, rSELys demonstrated antibacterial effects on both Gram-positive and Gram-negative strains, with inhibition zones of 11 and 9 mm, respectively. SEM analysis confirmed hydrolysis activity, the MIC was determined to be 31.25 µg/ml and 3.9 µg/ml, and MBC 0.97 µg/ml, respectively. CD and fluorescence studies showed that up to a temperature of 85 °C and a pH value of 8-12 no structural changes occur, and thermal stability protein was confirmed.

RESUMEN

Highly thermostable RhB@Zr-Eddc composites with the Rhodamine B (RhB) enclosed into the nanocages of Zr-Eddc was synthesized by one-pot method under hydrothermal conditions, whose structure, morphology and stability were characterized through the X-ray powder diffractometry (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). RhB@Zr-Eddc showed the highly thermal stability up to 550°C and emitted the bright red-light emission at 605 nm, which could highly selective detect the nitrofurazone (NFZ) among eleven other antibiotics in aqueous solution. Furthermore, via combining the RhB@Zr-Eddc with commercial green phosphor (Y3Al5O12:Ce3+, Ga3+), the mixture was encapsulated onto a 455 nm blue LED chip, creating an ex-cellent white light emitting diode (WLED) device with the correlated colour temperature (CCT) of 4710 K, luminous efficiency (LE) of 43.17 lm/w and Color Rendering Index (CRI) of 89.2.

RESUMEN

Novel Geobacillus sp. DS3, isolated from the Sikidang Crater in Dieng, exhibits promising characteristics for industrial applications, particularly in thermostable α-amylase production. Recombinant technology was used to express thermostable α-amylase in E. coli BL21(DE3) to overcome high-temperature production challenges. The study aimed to express, purify, characterize, and explore potential applications of this novel enzyme. The enzyme was successfully expressed in E. coli BL21(DE3) at 18 °C for 20 h with 0.5 mM IPTG induction. Purification with Ni-NTA column yielded 69.23 % from the initial crude enzyme, with a 3.6-fold increase in specific activity. The enzyme has a molecular weight of ±70 kDa (±58 kDa enzyme+11 kDa SUMO protein). It exhibited activity over a wide temperature range (30-90 °C) and pH range (6-8), with optimal activity at 70 °C and pH 6 with great stability at 60 °C. Kinetic analysis revealed Km and Vmax values of 324.03 mg/ml and 36.5 U/mg, respectively, with dextrin as the preferred substrate without cofactor addition. As a metalloenzyme, it showed the best activity in the presence of Ca2+. The enzyme was used for porous starch production and successfully immobilized with chitosan, exhibiting improved thermal stability. After the fourth reuse, the immobilized enzyme maintained 62 % activity compared to the initial immobilization.

RESUMEN

The ß-glucosidases known to improve tea aroma are all mesothermal enzymes, limiting their use under brewing conditions. Based on the properties analysis and molecular docking, the thermostable ß-glucosidase (TPG) from Thermotoga petrophlia showed potential to enhance tea aroma. Treatment by recombinant TPG at 90 °C, the floral, sweet and grassy notes of instant Oolong tea were increased, while the roasted, caramel and woody notes were decreased. The improved floral, sweet and grassy notes were related to increase releasing of benzyl alcohol (floral), geraniol (floral), (Z)-3-hexen-1-ol (grassy), benzaldehyde (sweet) and 1-hexanol (grassy) by TPG hydrolyzing of (Z)-3-hexenyl-ß-D-glucopyranoside, hexanyl-ß-D-glucopyranoside (HGP), benzyl-ß-D-glucopyranoside, prunasin and geranyl-ß-D-glucopyranoside (GGP), respectively. Although the catalytic efficiency of TGP to GGP was about twice that to HGP, HPG was more competitive than GGP when they mixed. Combined with microstructure analysis, the structure-function relationship of TPG-influencing tea aroma were understood. This study provided the method of how to mining new function of characterized ß-glucosidases, as well as a theoretical basis for the development of new tea products.

Asunto(s)

RESUMEN

Dienelactone hydrolase (DLH) is one of numerous hydrolytic enzymes with an α/ß-hydrolase fold, which catalyze the hydrolysis of dienelactone to maleylacetate. The DLHs share remarkably similar tertiary structures and a conserved arrangement of catalytic residues. This study presents the crystal structure and comprehensive functional characterization of a novel thermostable DLH from the bacterium Hydrogenobacter thermophilus (HtDLH). The crystal structure of the HtDLH, solved at a resolution of about 1.67 Å, exhibits a canonical α/ß-hydrolase fold formed by eight ß-sheet strands in the core, with one buried α-helix and six others exposed to the solvent. The structure also confirmed the conserved catalytic triad of DHLs formed by Cys121, Asp170, and His202 residues. The HtDLH forms stable homodimers in solution. Functional studies showed that HtDLH has the expected esterase activity over esters with short carbon chains, such as p-nitrophenyl acetate, reaching optimal activity at pH 7.5 and 70 °C. Furthermore, HtDLH maintains more than 50 % of its activity even after incubation at 90 °C for 16 h. Interestingly, HtDLH exhibits catalytic activity towards polyethylene terephthalate (PET) monomers, including bis-1,2-hydroxyethyl terephthalate (BHET) and 1-(2-hydroxyethyl) 4-methyl terephthalate, as well as other aliphatic and aromatic esters. These findings associated with the lack of activity on amorphous PET indicate that HtDLH has characteristic of a BHET-degrading enzyme. This work expands our understanding of enzyme families involved in PET degradation, providing novel insights for plastic biorecycling through protein engineering, which could lead to eco-friendly solutions to reduce the accumulation of plastic in landfills and natural environments.

Asunto(s)

RESUMEN

Nature has developed extremozymes that catalyze complex reaction processes in extreme environmental conditions. Accordingly, a combined approach consisting of extremozyme screening, ancestral sequence resurrection (ASR), and molecular dynamic simulation was utilized to construct a developed endoglucanase. The primary experimental and in-silico data led to the prediction of a hypothetical sequence of endoglucanase (EG5-G131) using Bacillus sp. G131 confirmed by amplification and sequencing. EG5-G131 exhibited noticeable stability in a broad-pH range, several detergents, organic solvents, and temperatures up to 80 °C. The molecular weight, Vmax, and Km of the purified endoglucanase were estimated to be 36 kDa, 4.32 µmol/min, and 23.62 mg/ml, respectively. The calculated thermodynamic parameters for EG5-G131 confirmed its intrinsic thermostability. Computational analysis revealed Glu142 and Glu230 as active-site residues of the enzyme. Furthermore, the enzyme remained bound to cellotetraose at 298 K, 333 K, 343 K, and 353 K for 300 ns, consistent with our experimental data. ASR of EG5-G131 led to the introduction of ancestral ANC204 and ANC205, which show similar thermodynamic characteristics with the last Firmicute common ancestor. Finally, truncating loops from the N-terminal of two sequences created two variants with desirable thermal stability, suggesting the evolutionary deciphering of the functional domain of the GH5 family in Bacillus sp. G131.

Asunto(s)

RESUMEN

Flavin reductases play a vital role in catalyzing the reduction of flavin through NADH or NADPH oxidation. The gene encoding flavin reductase from the thermophilic bacterium Geobacillus mahadii Geo-05 (GMHpaC) was cloned, overexpressed in Escherichia coli BL21 (DE3) pLysS, and purified to homogeneity. The purified recombinant GMHpaC (Class II) contains chromogenic cofactors, evidenced by maximal absorbance peaks at 370 nm and 460 nm. GMHpaC stands out as the most thermostable and pH-tolerant flavin reductase reported to date, retaining up to 95 % catalytic activity after incubation at 70 °C for 30 min and maintaining over 80 % activity within a pH range of 2-12 for 30 min. Furthermore, GMHpaC's catalytic activity increases by 52 % with FMN as a co-factor compared to FAD and riboflavin. GMHpaC, coupled with 4-hydroxyphenylacetate-3-monooxygenase (GMHpaB) from G. mahadii Geo-05, enhances the hydroxylation of 4-hydroxyphenylacetate (HPA) by 85 %. The modeled structure of GMHpaC reveals relatively conserved flavin and NADH binding sites. Modeling and docking studies shed light on structural features and amino acid substitutions that determine GMHpaC's co-factor specificity. The remarkable thermostability, high catalytic activity, and general stability exhibited by GMHpaC position it as a promising enzyme candidate for various industrial applications.

Asunto(s)

RESUMEN

This study explored the metagenome of the Pir Panjal Hot Spring (PPHS) to identify thermostable hydrolases. The carboxypeptidase (CarP) gene was successfully amplified and cloned into Escherichia coli DH5-α cells, followed by expression in E. coli BL21-DE3 cells. The CarP enzyme was comprehensively characterized in vitro. Sequencing analysis revealed an open reading frame encoding a functional protein of 504 amino acids, with a molecular weight of 58.65 kDa and an isoelectric point of 4.81. The CarP protein was purified using Ni-His affinity chromatography, and the experimental molecular weight matched in silico predictions. The enzyme exhibited significant thermostability and alkaliphilic properties, with optimal activity at 70 °C and pH 10.0. Additionally, the presence of Zn+2 ions at concentrations of 5 and 10 mmol/L enhanced protease activity by 1.4 and 1.5-fold, respectively. This study reports the discovery of a novel, multifunctional, and thermostable CarP from hot-spring metagenomes. The enzyme's stability against high temperatures, metal ions, surfactants, and inhibitors, along with its specific substrate interactions, highlights its potential for various biotechnological applications.

Asunto(s)

RESUMEN

We previously identified M.ApeKI from Aeropyum pernix K1 as a highly thermostable DNA (cytosine-5)-methyltransferase. M.ApeKI uses the type II restriction-modification system (R-M system), among the best-studied R-M systems. Although endonucleases generally utilize Mg (II) as a cofactor, several reports have shown that MTases exhibit different reactions in the presence of metal ions. This study aim was to evaluate the enzymatic properties of DNA (cytosine-5)-methyltransferase M.ApeKI from archaea in the presence of metal ions. We evaluated the influence of metal ions on the catalytic activity and DNA binding of M.ApeKI. The catalytic activity was inhibited by Cu (II), Mg (II), Mn (II), and Zn (II), each at 5 mM. DNA binding was more strongly inhibited by 5 mM Cu (II) and 10 mM Zn (II). To our knowledge, this is the first report showing that DNA binding of typeII MTase is inhibited by metal ions.

RESUMEN

Research of the nontraditional polysaccharide gellan gum (GG) is a growing space for the development of novel drug delivery systems due to its tunable physic-mechanical properties, biocompatibility, and stability in a wide range of environments. Unfortunately, high temperature crosslinking is often required, representing a limiting factor for the incorporation of thermosensitive therapeutic agents. Here, we demonstrated that GG can be crosslinked at a low temperature (38 °C) using a simple fabrication process that utilizes trilysine as an alternative to traditional mono- or divalent ion crosslinkers. While elevated temperature mixing is still required to form a clear GG solution, crosslinking of 0.5 - 1 % GG (w/v) in the presence of trilysine (0.03 % - 0.05 % w/v) was achieved at 38 °C resulting in hydrogels with suitable working formulations to facilitate syringe loading. Low injection forces (< 20 N), and biocompatibility was evaluated with normal human dermal fibroblast (cell viability > 90 %). Frequency sweep showed a transition from purely liquid-like behavior to gel-like behavior with increased trilysine concentration. A temperature dependent behavior was lost with higher trilysine concentrations, indicating stable hydrogel formation. NMR results suggest that trilysine participates in gelation via both ionic interactions between the primary amines of trilysine and the carboxylate residues of glucuronic acid and hydrogen bonding. Released studies showed that GG hydrogels can entrap and provide sustained release of IgG in relation to the crosslinker, and antibody concentration used, with a burst release within the first 24 h (∼80 % cumulative released) followed by a sustained released for up to 5 days. Overall, findings demonstrate a promising nontoxic injectable hydrogel that requires lower crosslinking temperatures, is simple to manufacture and serves as a carrier of thermosensitive therapeutic agents.

Asunto(s)

RESUMEN

Collagenolytic proteases are widely used in the food, medical, pharmaceutical, cosmetic, and textile industries. Mesophilic collagenases exhibit collagenolytic activity under physiological conditions, but have limitations in efficiently degrading collagen-rich wastes, such as collagen from fish scales, at high temperatures due to their poor thermostability. Bacterial collagenolytic proteases are members of various proteinase families, including the bacterial collagenolytic metalloproteinase M9 and the bacterial collagenolytic serine proteinase families S1, S8, and S53. Notably, the C-terminal domains of collagenolytic proteases, such as the pre-peptidase C-terminal domain, the polycystic kidney disease-like domain, the collagen-binding domain, the proprotein convertase domain, and the ß-jelly roll domain, exhibit collagen-binding or -swelling activity. These activities can induce conformational changes in collagen or the enzyme active sites, thereby enhancing the collagen-degrading efficiency. In addition, thermostable bacterial collagenolytic proteases can function at high temperatures, which increases their degradation efficiency since heat-denatured collagen is more susceptible to proteolysis and minimizes the risk of microbial contamination. To date, only a few thermophile-derived collagenolytic proteases have been characterized. TSS, a thermostable and halotolerant subtilisin-like serine collagenolytic protease, exhibits high collagenolytic activity at 60°C. In this review, we present and summarize the current research on A) the classification and nomenclature of thermostable and mesophilic collagenolytic proteases derived from diverse microorganisms, and B) the functional roles of their C-terminal domains. Furthermore, we analyze the cleavage specificity of the thermostable collagenolytic proteases within each family and comprehensively discuss the thermostable collagenolytic protease TSS.

Asunto(s)

RESUMEN

Green fluorescent protein has long been a favorite protein for demonstrating protein purification in the biochemistry lab course. The protein's vivid green color helps demonstrate to students the concept(s) behind affinity or ion exchange chromatography. We designed a series of introduction to biochemistry labs utilizing a thermostable green protein (TGP-E) engineered to have unusually high thermostability. This protein allows students to proceed through purification and characterization without the need to keep protein samples on ice. The 5-week lab series begins with an introduction to molecular biology techniques during weeks 1 and 2, where site-directed mutagenesis is used introduce, a single nucleotide change that shifts the fluorescent spectra of TGP-E to either cyan (CTP-E) or yellow (YTP-E). Students identify successful mutagenesis reaction by the color of a small expression sample after induction with IPTG. Next, students purify either the TGP-E (control-typically one group volunteers), YTP-E, or CTP-E protein as a 1-week lab. During the following week's lab, students run SDS-PAGE to verify protein purity, bicinchoninic acid assay to quantify protein yield, and absorbance and fluorescence spectra to characterize their protein's fluorescent character. The final lab in the series investigates the thermostability of YTP-E and CTP-E compared with TGP-E using a fluorescence plate reader. This 5-week series of experiments provide students with experience in several key biochemistry techniques and allows the students to compare properties of mutations. At the end of the course, the students will write a research report and give a short presentation over their results.

RESUMEN

BACKGROUND: Esterases (EC 3.1.1.X) are enzymes that catalyze the hydrolysis ester bonds. These enzymes have large potential for diverse applications in fine industries, particularly in pharmaceuticals, cosmetics, and bioethanol production. METHODS AND RESULTS: In this study, a gene encoding an esterase from Thermobifida fusca YX (TfEst) was successfully cloned, and its product was overexpressed in Escherichia coli and purified using affinity chromatography. The TfEst kinetic assay revealed catalytic efficiencies of 0.58 s-1 mM-1, 1.09 s-1 mM-1, and 0.062 s-1 mM-1 against p-Nitrophenyl acetate, p-Nitrophenyl butyrate, and 1-naphthyl acetate substrates, respectively. Furthermore, TfEst also exhibited activity in a pH range from 6.0 to 10.0, with maximum activity at pH 8.0. The enzyme demonstrated a half-life of 20 min at 70 °C. Notably, TfEst displayed acetyl xylan esterase activity as evidenced by the acetylated xylan assay. The structural prediction of TfEst using AlphaFold indicated that has an α/ß-hydrolase fold, which is consistent with other esterases. CONCLUSIONS: The enzyme stability over a broad pH range and its activity at elevated temperatures make it an appealing candidate for industrial processes. Overall, TfEst emerges as a promising enzymatic tool with significant implications for the advancement of biotechnology and biofuels industries.

Asunto(s)

RESUMEN

Thermophilic actinomycetes are commonly found in extreme environments and can thrive and adapt to extreme conditions. These organisms exhibit substantial variation and garnered significant interest due to their remarkable enzymatic activities. This study evaluated the potential of Streptomyces griseorubens NBR14 and Nocardiopsis synnemataformans NBRM9 strains to produce thermo-stable amylase via submerged fermentation using wheat and bean straw. The Box-Behnken design was utilized to determine the optimum parameters for amylase biosynthesis. Subsequently, amylase underwent partial purification and characterization. Furthermore, the obtained hydrolysate was applied for ethanol fermentation using Saccharomyces cerevisiae. The optimal parameters for obtaining the highest amylase activity by NBR14 (7.72 U/mL) and NBRM9 (26.54 U/mL) strains were found to be 40 and 30 °C, pH values of 7, incubation time of 7 days, and substrate concentration (3 and 2 g/100 mL), respectively. The NBR14 and NBRM9 amylase were partially purified, resulting in specific activities of 251.15 and 144.84 U/mg, as well as purification factors of 3.91 and 2.69-fold, respectively. After partial purification, the amylase extracted from NBR14 and NBRM9 showed the highest activity level at pH values of 9 and 7 and temperatures of 50 and 60 °C, respectively. The findings also indicated that the maximum velocity (Vmax) for NBR14 and NBRM9 amylase were 57.80 and 59.88 U/mL, respectively, with Km constants of 1.39 and 1.479 mM. After 48 h, bioethanol was produced at concentrations of 5.95 mg/mL and 9.29 mg/mL from hydrolyzed wheat and bean straw, respectively, through fermentation with S. cerevisiae. Thermophilic actinomycetes and their α-amylase yield demonstrated promising potential for sustainable bio-ethanol production from agro-byproducts.

Asunto(s)

RESUMEN

Aflatoxin B1 (AFB1) contamination is a food safety issue threatening human health globally. Biodegradation is an effective method for overcoming this problem, and many microorganisms have been identified as AFB1-degrading strains. However, the response mechanisms of these microbes to AFB1 remain unclear. More degrading enzymes, especially of new types, need to be discovered. In this study, a novel AFB1-degrading strain, DDC-4, was isolated using coumarin as the sole carbon source. This strain was identified as Bacillus halotolerans through physiological, biochemical, and molecular methods. The strain's degradation activity was predominantly attributable to thermostable extracellular proteins (degradation rate remained approximately 80% at 90 °C) and was augmented by Cu2+ (95.45% AFB1 was degraded at 48 h). Alpha/beta hydrolase (arylesterase) was selected as candidate AFB1-degrading enzymes for the first time as a gene encoding this enzyme was highly expressed in the presence of AFB1. Moreover, AFB1 inhibited many genes involved in the nucleotide synthesis of strain DDC-4, which is possibly the partial molecular mechanism of AFB1's toxicity to microorganisms. To survive under this stress, sporulation-related genes were induced in the strain. Altogether, our study identified a novel AFB1-degrading strain and explained its response mechanisms to AFB1, thereby providing new insights for AFB1 biodegradation.

Asunto(s)

RESUMEN

Proteins with multiple domains play pivotal roles in various biological processes, necessitating a thorough understanding of their structural stability and functional interplay. Here, a structure-guided protein engineering approach is proposed to develop thermostable Cas9 (CRISPR-associated protein 9) variant for CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) interference applications. By employing thermodynamic analysis, combining distance mapping and molecular dynamics simulations, deletable domains are identified to enhance stability while preserving the DNA recognition function of Cas9. The resulting engineered Cas9, termed small and dead form Cas9, exhibits improved thermostability and maintains target DNA recognition function. Cryo-electron microscopy analysis reveals structural integrity with reduced atomic density in the deleted domain. Fusion with functional elements enables intracellular delivery and nuclear localization, demonstrating efficient gene suppression in diverse cell types. Direct delivery in the mouse brain shows enhanced knockdown efficiency, highlighting the potential of structure-guided engineering to develop functional CRISPR systems tailored for specific applications. This study underscores the significance of integrating computational and experimental approaches for protein engineering, offering insights into designing tailored molecular tools for precise biological interventions.

RESUMEN

Galacto-oligosaccharides (GOS) are prebiotic compounds that are mainly used in infant formula to mimic bifidogenic effects of mother's milk. They are synthesized by ß-galactosidase enzymes in a trans-glycosylation reaction with lactose. Many ß-galactosidase enzymes from different sources have been studied, resulting in varying GOS product compositions and yields. The in vivo role of these enzymes is in lactose hydrolysis. Therefore, the best GOS yields were achieved at high lactose concentrations up to 60%wt, which require a relatively high temperature to dissolve. Some thermostable ß-glucosidase enzymes from thermophilic bacteria are also capable of using lactose or para nitrophenyl-galactose as a substrate. Here, we describe the use of the ß-glucosidase BglA from Thermotoga maritima for synthesis of oligosaccharides derived from lactose and cellobiose and their detailed structural characterization. Also, the BglA enzyme kinetics and yields were determined, showing highest productivity at higher lactose and cellobiose concentrations. The BglA trans-glycosylation/hydrolysis ratio was higher with 57%wt lactose than with a nearly saturated cellobiose (20%wt) solution. The yield of GOS was very high, reaching 72.1%wt GOS from lactose. Structural elucidation of the products showed mainly ß(1 → 3) and ß(1 → 6) elongating activity, but also some ß(1 → 4) elongation was observed. The ß-glucosidase BglA from T. maritima was shown to be a very versatile enzyme, producing high yields of oligosaccharides, particularly GOS from lactose. KEY POINTS: • ß-Glucosidase of Thermotoga maritima synthesizes GOS from lactose at very high yield. • Thermotoga maritima ß-glucosidase has high activity and high thermostability. • Thermotoga maritima ß-glucosidase GOS contains mainly (ß1-3) and (ß1-6) linkages.

Asunto(s)

RESUMEN

Since SARS-CoV-2 is a highly transmissible virus, alternative reliable, fast, and cost-effective methods are still needed to prevent virus spread that can be applied in the laboratory and for point-of-care testing. Reverse transcription real-time fluorescence quantitative PCR (RT-qPCR) is currently the gold criteria for detecting RNA viruses, which requires reverse transcriptase to reverse transcribe viral RNA into cDNA, and fluorescence quantitative PCR detection was subsequently performed. The frequently used reverse transcriptase is thermolabile; the detection process is composed of two steps: the reverse transcription reaction at a relatively low temperature, and the qPCR performed at a relatively high temperature, moreover, the RNA to be detected needs to pretreated if they had advanced structure. Here, we develop a fast and sensitive one-tube SARS-CoV-2 detection platform based on Ultra-fast RTX-PCR and Pyrococcus furiosus Argonaute-mediated Nucleic acid Detection (PAND) technology (URPAND). URPAND was achieved ultra-fast RTX-PCR process based on a thermostable RTX (exo-) with both reverse transcriptase and DNA polymerase activity. The URPAND can be completed RT-PCR and PAND to detect nucleic acid in one tube within 30 min. This method can specifically detect SARS-CoV-2 with a low detection limit of 100 copies/mL. The diagnostic results of clinical samples with one-tube URPAND displayed 100% consistence with RT-qPCR test. Moreover, URPAND was also applied to identify SARS-CoV-2 D614G mutant due to its single-nucleotide specificity. The URPAND platform is rapid, accurate, tube closed, one-tube, easy-to-operate and free of large instruments, which provides a new strategy to the detection of SARS-CoV-2 and other RNA viruses.

Asunto(s)

RESUMEN

Recombinase polymerase amplification (RPA) is an isothermal DNA amplification reaction at around 41 °C using recombinase (Rec), single-stranded DNA-binding protein (SSB), strand-displacing DNA polymerase (Pol), and an ATP-regenerating enzyme. Considering the onsite use of RPA reagents, lyophilized RPA reagents with long storage stability are highly desired. In this study, as one of the approaches to solve this problem, we attempted to use a thermostable pyruvate kinase (PK). PK gene was isolated from a thermophilic bacterium Thermotoga maritima (Tma-PK). Tma-PK was expressed in Escherichia coli and purified from the cells. Tma-PK exhibited higher thermostability than human PK. The purified Tma-PK preparation was applied to RPA as an ATP-regenerating enzyme. Liquid RPA reagent with Tma-PK exhibited the same performance as that with human PK. Lyophilized RPA reagent with Tma-PK exhibited higher performance than that with human PK. Combined with our previous results of RPA reagents of thermostable Pol from a thermophilic bacterium, Aeribacillus pallidus, the results in this study suggest that thermostable enzymes are preferable to mesophilic ones as a component in lyophilized RPA reagents.

Asunto(s)