RESUMEN

Although noncovalent interactions and covalent reactions between phenolic compounds and proteins have been investigated across diverse scientific disciplines, a comprehensive understanding and identification of their products remain elusive. This review will initially outline the chemical framework and, subsequently, delve into unresolved or debated chemical and functional food-related implications, as well as forthcoming challenges in this topic. The primary objective is to elucidate the multiple aspects of protein-phenolic interactions and reactions, along with the underlying overwhelming dynamics and possibilities of follow-up reactions and potential crosslinking between proteins and phenolic compounds. The resulting products are challenging to identify and characterize analytically, as interactions and reactions occur concurrently, mutually influencing each other. Moreover, they are being modulated by various conditions such as the reaction parameters and, obviously, the chemical structure. Additionally, this review delineates the resulting discrepancies and challenges of properties and attributes such as color, taste, foaming, emulsion and gel formation, as well as effects on protein digestibility and allergenicity. Ultimately, this review is an opinion paper of a group of experts, dealing with these challenges for quite a while and aiming at equipping researchers with a critical and systematic approach to address current research gaps concerning protein-phenolic interactions and reactions.

Asunto(s)

RESUMEN

Dehydrated integral forage palm cladode flour (FPF) presents a promising nutritional and functional approach to enriching fettuccine-type pasta. This study investigated the use of microwave-dehydrated FPF (at 810 W) as a partial wheat flour substitute (0, 5, 10, 15, and 20% w/w) in fresh and dry fettuccine-type pasta. The thermomechanical properties of flour blends and the technological and sensory attributes of the resulting pasta were evaluated. FPF displayed a high protein (15.80%), mineral (15.13%), dietary fiber (67.35%), and total soluble phenolic compound (251 mg EAG·100 g-1) content. While water absorption (~58%) and dough stability remained consistent across formulations, a decrease in maximum torque during heating was observed (p < 0.05). Fettuccine-type pasta containing 10% FPF exhibited an acceptable optimal cooking time, solid loss, weight gain, and textural properties for both fresh and dry pasta. Sensory evaluation revealed acceptability above 63% for pasta with 10% FPF, with a slight preference for the fresh version. Fresh pasta flavored with garlic and extra virgin olive oil (garlic and oil pasta) achieved a sensory acceptance rate of 79.67%. These findings demonstrate the potential of FPF for fettuccine-type pasta production, contributing desirable technological characteristics and achieving acceptable sensory profiles.

RESUMEN

Milk powders are becoming a major attraction for many industrial applications due to their nutritional and functional properties. Different types of powdered milk, each with their own distinct chemical compositions, can have different functionalities. Consequently, the development of rapid monitoring methods is becoming an urgent task to explore and expand their applicability. Lately, there is growing emphasis on the potential of near-infrared spectroscopy (NIRS) as a rapid technique for the quality assessment of dairy products. In the present work, we explored the potential of NIRS coupled with chemometrics for the prediction of the main functional and chemical properties of three types of milk powders, as well as their important processing parameters. Mare, camel and cow milk powders were prepared at different concentrations (5%, 10% and 12%) and temperatures (25 °C, 40 °C and 65 °C), and then their main physicochemical attributes and NIRS spectra were analyzed. Overall, high accuracy in both recognition and prediction based on type, concentration and temperature was achieved by NIRS-based models, and the quantification of quality attributes (pH, viscosity, dry matter content, fat content, conductivity and individual amino acid content) also resulted in high accuracy in the models. R2CV and R2pr values ranging from 0.8 to 0.99 and 0.7 to 0.98, respectively, were obtained by using PLSR models. However, SVR models achieved higher R2CV and R2pr values, ranging from 0.91 to 0.99 and 0.80 to 0.99, respectively.

Asunto(s)

RESUMEN

This review examines the potential of curcumin as a technological and functional food additive in dairy and milk-based products. The advantages of incorporating curcumin in these products include its antimicrobial properties, support for the activity of lactic acid bacteria, improvement in sensory characteristics, and shelf-life extension. Curcumin notably enhances antioxidant activity and acts as a natural preservative in cheese, cheese-like products, and butter. In ice cream and dairy desserts, curcumin contributes to attractive color formation and offers functional benefits such as antioxidant activity, photostability, and increased nutritional value. However, the use of turmeric extract, a common source of curcumin, presents challenges including low bioavailability, color instability, and the formation of insoluble precipitates. The application of specialized curcumin formulations with enhanced water dispersion, purity, and bioavailability can mitigate these issues, improve the product's technological properties, and ensure compliance with local regulations. This review highlights the importance of continued research and development to optimize the use of curcumin in dairy and milk-based products, offering valuable insights for scientists and food industry professionals.

RESUMEN

The incorporation of a blackcurrant pomace extract (BPE) at 2.5%, 5.0% and 10.0% into an emulsion gel based on high oleic sunflower and linseed oils was examined in order to obtain a functional ingredient to be used as a pork backfat replacer in Vienna sausages. The replacement of the pork backfat with the control emulsion gel reduced the cooking loss but negatively affected the color by decreasing L* and a* values as compared with the traditional product. A decrease in the n-6/n-3 ratio from 10.99 to around 1.54 (by 7 times) was achieved through reformulation, while the PUFA/SFA ratio increased from 0.49 to 1.09. The incorporation of BPE did not have a major impact on the fatty acid profile and improved color by increasing redness, but negatively affected the texture by increasing hardness, gumminess and share force as compared with the sausages reformulated without extract. BPE reduced the pH and the thermal stability of the emulsion gels, increased cooking loss and decreased moisture retention in sausages. BPE increased the oxidative stability of Vienna sausages enriched in polyunsaturated fatty acids; however, the incorporation of BPE into the emulsion gels above 5% affected the sensory scores for appearance, texture and general acceptability of the reformulated sausages.

RESUMEN

Aquafaba is the residual water from cooking chickpea in water. It has a high gelling ability, allowing it to create stable gels. However, those functional properties depend on the legume composition, genotype, cooking time, pressure, and temperature. This study aimed to evaluate the different processes for obtaining aquafaba and compare their nutritional composition and technological characteristics using a systematic review. The authors performed the systematic review by performing specific search strategies for Scopus, Web of Science, Pubmed, Lilacs, Google Scholar, and ProQuest. A total of 17 studies were analyzed. Of them, 17.64% (n = 3) used the wastewater from canned chickpeas, 17.64% (n = 3) compared the wastewater of canned chickpeas and dry grains, and 58.82% (n = 10) used dry chickpeas. Studies used different methods to analyze the protein content. The most used (n = 5) was the Association of Official Analytical Chemists (AOAC). The aquafaba presented carbohydrates at 2.03-2.59 g/100ml; protein at 0.0.8-2.8 g/100ml; and fat at 0.07-0.1 g/100ml. In general, preparing aquafaba followed: soaking (8-10 h at 4 °C-1 chickpea: 4 water), pressure cooking (30 min-2 chickpea: 3 water), and refrigerating (24h/4 °C). In general, the results showed the following steps to prepare aquafaba: soaking for 8-10 h at 4 °C at the proportion of 1:4 (chickpea:water), pressure cooking for 30 min in the proportion of 2:3 (chickpea: water), and refrigerating 24 h/4 °C. These procedures in a homemade aquafaba presented the best results, considering foam development and higher stability. The aquafaba from canned chickpeas has a higher foam-ability and lower emulsion properties than homemade cooking aquafaba. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05920-y.

RESUMEN

This study evaluated the potential use of mid-infrared spectroscopy to predict milk coagulation traits in bulk milk from Mediterranean Italian buffaloes. A total of 1736 bulk milk samples from 55 farms in central Italy were collected during the official milk quality testing system. The prediction models were developed based on modified partial least-squares regression with 75% of the samples and validated with the remaining samples. All bulk milk samples coagulated between 7.37 and 29.45 min. Average values for milk coagulation traits in the calibration set were 17.71 min, 3.29 min, and 38.83 mm for rennet coagulation time, curd firming time, and curd firmness, respectively. The validation set included samples with similar mean and standard deviation for each trait. The prediction models showed the greatest coefficient of determination of external validation (0.57) and the ratio of prediction to deviation (1.52) for curd firmness. Similar fitting statistics of the prediction models were obtained for rennet coagulation time and curd firming time. In conclusion, the prediction models for all three coagulation traits were below the threshold to consider the prediction models adequate even for rough screening of the samples.

RESUMEN

Plant-based milk has gained considerable attention; however, its high nutritional variation highlights the need for improved formulation designs to enhance its quality. This study aimed to nutritionally compare cow milk with plant-based milk produced from hazelnuts (H), Brazil nuts (BN), cashew nuts (CN), soybeans (S), and sunflower seeds (SS), and to perform physicochemical and technological characterization. The plant-based milk produced with isolated grains showed a nutritional composition inferior to that of cow milk in almost all evaluated parameters, protein content (up to 1.1 g 100 g-1), lipids (up to 2.7 g 100 g-1), color parameters, minerals, and especially calcium (up to 62.4 mg L-1), which were originally high in cow milk (up to 1030 mg L-1). However, the plant-based milk designed using a blend composition was able to promote nutritional enhancement in terms of minerals, especially iron (Fe) and magnesium (Mg), high-quality lipids (up to 3.6 g 100 g-1), and carbohydrates (3.4 g 100 g-1 using CN, BN, and S). The protein content was 1.3% compared to 5.7 in cow milk, and the caloric value of plant-based milk remained 32.8 at 52.1 kcal, similar to cow milk. Satisfactory aspects were observed regarding the shelf life, especially related to microbiological stability during the 11 d of storage at 4 °C. For the designed plant-based milk to be equivalent to cow milk, further exploration for optimizing the blends used to achieve better combinations is required. Furthermore, analyzing possible fortification and preservation methods to increase shelf life and meet the nutritional and sensory needs of the public would be interesting.

RESUMEN

The aim of this study was to evaluate the effect of the enzymatic hydrolysis, performed using Alcalase and Protamex enzymes, on the technological functionalities and the antioxidant capacity of whey protein hydrolysates (WPHs) to identify the conditions allowing to obtain target functionality/ies. Samples were characterized for hydrolysis degree (DH), molecular weight distribution, structural properties, and food-related functionalities. Free sulfhydryl groups and surface hydrophobicity significantly decreased with the increase in DH, regardless of the used enzyme. The foaming and antioxidant properties of Alcalase WPHs were higher as compared to those of WPI, reaching the maximum value at DH = 18-20 %, while higher DH resulted in impaired functionality. Gelling properties were guaranteed when WPI was hydrolysed by Protamex at DH < 15 % while foaming and antioxidant abilities were fostered at 15 < DH < 21 %. These results were well correlated with MW distribution and were rationalized into a road map which represents a useful tool in the selection of proper hydrolysis conditions (time, DH, enzyme type) to obtain WPHs with tailored functionalities. Research outcomes highlighted the possibility to drive protein hydrolysis to optimize the desired functionality/ies.

Asunto(s)

RESUMEN

This study isolated and identified autochthonous lactic acid bacteria (LAB) from mandacaru fruit and evaluated their potential probiotic and technological aptitudes in vitro, as well as the protective effects of freeze-dried mandacaru fruit on the most promising LAB isolate during lyophilization and refrigeration storage. Initially, 212 colonies were isolated from mandacaru fruit, and 34 were preliminarily identified as LAB. Thirteen isolates identified by 16S-rRNA sequencing as Pediococcus pentosaceus were negative for DNase, gelatinase, hemolytic, and biogenic amine production. The selected isolates showed proteolytic activity, diacetyl and exopolysaccharide production, and good tolerance to different NaCl concentrations while having low cellular hydrophobicity and antagonistic activity against pathogens. The survival of isolates sharply decreased after 3 h of exposure to pH 2 and had a good tolerance to 1 % bile salt. A principal component analysis selected P. pentosaceus 57 as the most promising isolate based on the examined technological and probiotic-related physiological properties. This isolate was lyophilized with mandacaru fruit and stored under refrigeration for 90 days. P. pentosaceus 57 lyophilized with mandacaru fruit had high viable cell counts (9.69 ± 0.03 log CFU/mL) and >50 % of physiologically active cells at 90 days of refrigeration storage. The results indicate that mandacaru fruit is a source of P. pentosaceus with aptitudes to be explored as potential probiotic and technological characteristics of interest for the food industry, besides being a good candidate for use in lyophilization processes and refrigeration storage of LAB due to its cryoprotective effects.

Asunto(s)

RESUMEN

Viili, a Finnish ropy fermented milk, is traditionally manufactured through spontaneous fermentation, by mesophilic lactic acid bacteria and yeast-like fungi, or back-slopping. This study evaluated four natural viili starters as sources of lactic acid bacteria for dairy production. Back-slopping activation of the studied viili samples was monitored through pH and titratable acidity measurements and enumeration of mesophilic lactic acid bacteria. Sixty lactic acid bacteria isolates were collected, molecularly identified, and assayed for acidification performance, enzymatic activities, production of exopolysaccharides (EPSs), presence of the histidine decarboxylase (hdcA) gene of Gram-positive bacteria, and production of bacteriocins. A neat predominance of Lactococcus lactis emerged among the isolates, followed by Enterococcus faecalis, Enterococcus faecium, Enterococcus durans, Enterococcus lactis, and Lactococcus cremoris. Most isolates exhibited proteolytic activity, whereas only a few enterococci showed lipase activity. Five isolates identified as L. cremoris, L. lactis, and E. faecalis showed a good acidification performance. Most of the isolates tested positive for leucine arylamidase, whereas only one E. durans and two L. lactis isolates were positive for valine arylamidase. A few isolates also showed a positive reaction for beta-galactosidase and alpha- and beta-glucosidase. None of the isolates produced EPSs or bacteriocins. The hdcA gene was detected in five isolates identified as L. lactis and E. faecium. A few L. cremoris and L. lactis isolates for potential use as starter or adjunct cultures for dairy processing were finally identified.

RESUMEN

Germination is a natural, simple, and economical process used to improve the quality of nutritional and technological grains. In this study, native and sprouted sorghum flours were characterized regarding their technological properties (particle size distribution, water, and oil absorption capacity, swelling power and solubility, microscopy of starch granules, and pasting and thermal properties). Nutritional and phytochemical characterization profiles, including free sugars, fatty acids, organic acids, tocopherols, and phenolic compounds, were explored through chromatographic methods. The antioxidant, anti-inflammatory, and cytotoxic activities of the respective hydroethanolic extracts were also evaluated. The results showed that the germination process caused significant changes in the flour composition and properties, causing reduced gelatinization temperature and retarded starch retrogradation; an increased content of free sugars and total organic acids; and a decreased content of tocopherols and phenolic compounds. In terms of bioactivity, the sprouted sorghum flour extract showed better lipid-peroxidation-inhibition capacity and none of the extracts revealed hepatotoxicity or nephrotoxicity, which are important results for the validation of the use of the flours for food purposes. Germination is an efficient and alternative method for grain modification that gives improved technological properties without chemical modification or genetic engineering.

RESUMEN

Enterococci, known for their resilience, are commonly found in food, the environment, and the gastrointestinal tracts of humans and animals. In recent research, six strains of enterococcus were isolated from bat guano. These include Enterococcus mundtii SRBG1, Enterococcus gallinarum SRBG3, Enterococcus faecium SRBG2, Enterococcus casseliflavus EC1, and Enterococcus devriesei CAU 1344. Identification was done using 16S DNA analysis. Each strain underwent evaluation for its technological properties (such as tolerances to various NaCl concentrations and temperatures, as well as amylolytic, ß-galactosidase, lipolytic, and proteolytic activities, and EPS production) and selected probiotic properties (including safety profile, resistance to 0.3 percent bile salts and gastric juice with a pH of 2.5, lysozyme tolerance, and antibacterial and antibiofilm activities against four foodborne pathogens). The results were analyzed using Principal Component Analysis. This analysis revealed that E. mundtii SRBG1 and E. gallinarum SRBG3, followed by E. faecium SRBG2, were most closely associated with a broad range of technological characteristics and were subsequently used for fermenting skimmed milk. The rheological properties of the samples indicated a shear-thinning or non-Newtonian behavior. Furthermore, during storage of the fermented milk at 4 °C over periods of 1, 7, 14, and 21 days, there were no significant changes in bacterial count (at around 7 log10 CFU/mL) and pH when fermented with the three evaluated strains.

RESUMEN

Ripened sheep sausages are widely consumed in Italy, particularly in Sardinia. Despite their driving role in flavor and color development, coagulase-negative staphylococci in these products have been rarely investigated. A total of 70 CoNS cultures isolated from Sardinian sheep sausages were characterized by rep-PCR and M13-RAPD typing and identified by 16S rDNA sequencing. S. xylosus and S. equorum accounted for more than 70% of the total isolates, whilst S. pasteuri (8.5%), S. succinus (2.8%), and S. haemolyticus (2.8%) were less represented. The genes encoding the synthesis of putrescine, tyramine, cadaverine, and histamine were evaluated by PCR. None of the strains hosted genes for decarboxylases, except one S. pasteuri strain that was potentially a tyramine-producer. Antibiotic resistance was evaluated, along with nitrate reductase, lipolytic, and proteolytic activity, in a pool of selected cultures. Resistance to the primary antibiotics was rather widespread. S. xylosus, S. equorum, and S. pasteuri strains were all resistant to amoxicillin and kanamycin. S. equorum strains were sensitive to all tested antibiotics. S. xylosus strains were all resistant to penicillin B. Conversely, all S. pasteuri strains were resistant to both ampicillin and penicillin B, and four out of five strains exhibited tetracycline resistance. The high variability in the production of sheep sausages makes the search for adjunct cultures of crucial relevance. According to this perspective, the characterization of the autochthonous CSN population represents the first step to approach a starter selection.

RESUMEN

This study investigated differences in the raw milk composition and technological properties between cows with different numbers of lactations. In total, 12 commercial herds were visited within a period of 12 weeks. On each farm, milk samples from five young cows (lactations 1-2) and five older cows (lactation ≥ 3) were collected. For each farm, milk samples from the young cows and the older cows, respectively, were pooled. The pooled milk samples were analyzed for gross composition and technological properties. Using principal component analysis (PCA) to assess the overall variation in milk quality attributes and the potential clustering of milk from young cows and older cows, respectively, an effect of breed, but no clear effect of lactation number, was observed. In contrast, one-way ANOVA showed higher plasmin activity (p = 0.002) in pooled milk from the older cows, whereas plasminogen-derived activity (p = 0.001) and total proteolysis (p = 0.029) were higher in milk from the young cows. Likewise, orthogonal projections to latent structure discriminant analysis (OPLS-DA) showed higher plasmin activity in milk from older cows, whereas younger cows had higher plasminogen-related activity and higher total proteolysis. To conclude, except for plasmin and plasminogen-related activities, there were no major differences in the composition and technological properties between milk from older cows and young cows.

RESUMEN

This study aimed to develop stable emulsion gels enriched in polyunsaturated fatty acids, formulated with a mixture of olive (75%) and linseed (25%) oils, by incorporating two different stabilizers-pea and soy protein isolates-and three different cold gelling agents-chitosan, pectin and xanthan-to be used as pork backfat replacers in beef burgers. The color, pH, stability and textural properties of the emulsion gels were analyzed as affected by cold storage (4 °C, 7 days). Proximate composition, fatty acid content, technological and sensory properties were determined after burger processing. Meanwhile, color, pH, textural parameters and lipid oxidation were monitored in burgers at 0, 5 and 10 days of storage at 4 °C. A reduction of the fat content between 21.49% and 39.26% was achieved in the reformulated burgers as compared with the control, while the n-6/n-3 polyunsaturated fatty acid ratio decreased from 5.11 to 0.62. The highest moisture and fat retention were found in reformulated burgers made with xanthan, both with pea and soy proteins; however, their textural properties were negatively affected. The reformulated burgers made with chitosan were rated highest for sensory attributes and overall acceptability, not significantly different from the controls.

RESUMEN

Several solutions have been presented to minimize the environmental impact generated by polymers produced from petroleum resources. This work produced a biopolymer using glycerol, starch (<5) and macaúba epicarp fiber (10-15-20-25-30%) as reinforcement. The interaction of glycerol with starch was favored by the addition of acetic acid (CH3COOH). The pH was adjusted with sodium hydroxide (NaOH) at a concentration of 0.1 mol·L-1. The characterization was carried out through scanning electron microscopy (SEM), infrared reflectance-FTIR, water solubility, biodegradability and technological properties. Through the results obtained in this work, it is observed that the tensile strength and modulus of elasticity are influenced by the addition of the fiber concentration; the sample that received a 30% addition presented 19.17 MPa and 348.12 MPa, respectively. All samples showed low solubility in water and low density, in addition to a high rate of degradability in soil with mass loss corresponding to 59% over a period of three months. The results of this investigation are satisfactory for the production of materials that can be used in everyday life, replacing conventional plastic.

RESUMEN

Bologna sausage, also called "la grassa", is a very popular meat product despite its high fat content and lipidic profile raising serious negative health concerns. An emulsion gel containing olive, walnut, and chia oils, stabilized with soy protein isolate, transglutaminase, and chitosan, was used as total pork backfat replacer in Bologna sausage. The nutritional, textural, and technological properties were assessed and sensory analyses were conducted. Color, pH, and lipid oxidation were monitored during 18 days of cold storage (4 °C). A normal fat Bologna sausage was used as a control reference. A decrease in the n-6/n-3 ratio from 16.85 to 1.86 (by 9 times) was achieved in the reformulated product as compared with the control, while the PUFA/SFA ratio increased from 0.57 to 1.61. Color measurements indicated that the lightness and yellowness increased while redness slightly decreased in the reformulated product. The total substitution of pork backfat in Bologna sausage by the emulsion gel developed in the present study was realized without significantly affecting the technological properties, the oxidative stability and the overall acceptance by the consumers.

RESUMEN

The absence of gluten proteins in sorghum allows for the production of baked goods that are suitable for celiacs. Previous studies have shown that the milling process affects the performance of sorghum flour in baked products, especially those that are gluten-free (GF). This study aimed to explore the effects of mill type (impact and roller) on flour properties and GF bread quality by assessing the technological quality, antioxidant activity, and mineral content of the bread. All particle populations of flour obtained via both millings presented a bimodal distribution, and the volume mean diameter (D 4,3) ranged from 431.6 µm to 561.6 µm. The partially refined milled flour obtained via polishing and impact milling produced bread with a soft crumb, fewer but larger alveoli in the crumb, and a structure that did not collapse during baking, showing the best performance in bread quality. In the in vitro bread digestibility assay, the total polyphenol content and antioxidant activity decreased during the digestion steps. High mineral (Cu, Fe, Mn, and Zn) contents were also found in a portion of the bread (120 g) made with whole sorghum flour; however, their potential bioavailability was reduced in the presence of a higher amount of bran.

RESUMEN

Drying rice in a single layer in a silo-dryer-aerator allows uniform drying. The objective of this study was to evaluate the physical, physicochemical, and morphological quality of rice grain cultivars (IRGA 424, BRS Pampeira, and Guri INTA) in the lower (initial time) and upper (final time) layers in a silo-dryer-aerator, employing single-layer loading at low temperatures, using the methods of near-infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, and multivariate statistical analysis. Drying rice in silo-dryer-aerator attenuated the moisture diffusivity in the grains, minimizing its effects on the physical, physicochemical, and morphological properties of the grains. However, the physicochemical constituents and morphology of starch were preserved by the low drying temperatures, mainly in the lower layers throughout the 2-month drying. The rice grains of the Guri INTA and BRS Pampeira cultivars were the most resistant to drying and showed greater uniformity on the final quality.