RESUMEN

INTRODUCTION: We aimed to compare periprosthetic femoral bone remodeling after cementless total hip arthroplasty (THA) using a short-tapered wedge stem and a fully hydroxyapatite (HA)-coated stem. MATERIALS AND METHODS: In this retrospective study, 24 primary cementless THA procedures with short-tapered wedge stem and 24 using a fully HA-coated stem were performed. The follow-up duration was 2 years for both groups. Clinical evaluation was performed using the Merle d'Aubigné and Postel scoring systems. Standardized anteroposterior radiographs of the pelvis and femur were obtained. Dual-energy X-ray absorptiometry was performed, and the bone mineral density (BMD) around the stem was assessed in each Gruen zone at the first postoperative week as a baseline value and at 6 weeks, 3 and 6 months, and 1 and 2 years postoperatively. RESULTS: The mean Merle d'Aubigné and Postel scores improved significantly postoperatively in both groups. None of the hips showed loosening in either group. Spot welds occurred in zones 1, 2, 6, and 7 in the short-tapered wedge group, and in all zones in the fully HA-coated group. Significant BMD loss occurred only in zone 4 in the short-tapered wedge group, and no significant bone loss occurred in any zone in the fully HA-coated stem group; a significant difference between the two groups was observed only in zone 4 at 2 years after THA. CONCLUSIONS: Clinical and radiographical outcomes in both groups were good, and both stems suppressed postoperative BMD loss at 2 years.

Asunto(s)

RESUMEN

BACKGROUND: In recent years, the use of tapered-wedge short stems has increased due to their ability to preserve bones and tendons. Surgical techniques occasionally result in a varus position of the stem, which is particularly pronounced in short stems. Although the varus position is not clinically problematic, there are reports of an increased incidence of stress shielding and cortical hypertrophy. Thus, we evaluated and examined the acceptable range of varus angles using finite element analysis. METHODS: Patients diagnosed with osteoarthritis of the hip joint who had undergone arthroplasty were selected and classified into three types [champagne-flute (type A), intermediate (type B), and stovepipe (type C)]. Finite element analysis was performed using Mechanical Finder. The model was created using a Taperloc microplasty stem with the varus angle increased by 1° from 0° to 5° from the bone axis and classified into seven zones based on Gruen's zone classification under loading conditions in a one-leg standing position. The volume of interest was set, the mean equivalent stress for each zone was calculated. RESULTS: A significant decrease in stress was observed in zone 2, and increased stress was observed in zones 3 and 4, suggesting the emergence of a distal periosteal reaction, similar to the results of previous studies. In zone 2, there was a significant decrease in stress in all groups at a varus angle ≥ 3°. In zone 3, stress increased from ≥ 3° in type B and ≥ 4° in type C. In zone 4, there was a significant increase in stress at varus angles of ≥ 2° in types A and B and at ≥ 3° in type C. CONCLUSION: In zone 2, the varus angle at which stress shielding above Engh classification grade 3 may appear is expected to be ≥ 3°. Distal cortical hypertrophy may appear in zones 3 and 4; the narrower the medullary cavity shape, the smaller the allowable angle of internal recession, and the wider the medullary cavity shape, the wider the allowable range. Long-term follow-up is required in patients with varus angles > 3°.

Asunto(s)

RESUMEN

INTRODUCTION: Bone maintenance after total hip arthroplasty (THA) is important for implant success. This study aimed to investigate the relationship between patient characteristics and periprosthetic bone maintenance after THA for better implant selection. MATERIALS AND METHODS: This retrospective cohort study enrolled 112 consecutive patients who underwent THA using full hydroxyapatite (HA) compaction with short (n = 55) or short-tapered wedge (n = 61) stems. Periprosthetic bone mineral density (BMD) was compared between the two groups after propensity score matching, and the relationship between periprosthetic BMD changes and patient background was analyzed. RESULTS: Both groups showed similar periprosthetic BMD changes after adjusting for patient background using propensity score matching. Canal flare index > 3.7 in patients that underwent THA using tapered-wedge stem (odds ratio (OR), 3.2; 95% confidence interval (CI), 1.3-7.9, p = 0.013) and baseline zone 1 BMD > 0.65 in patients that received with short HA compaction stems (OR, 430.0; 95% CI 1.3-1420, p = 0.040) were associated with proximal periprosthetic bone maintenance after THA. CONCLUSION: Considering their predictive value, canal flare index and zone 1 BMD assessment might be useful strategies for implant selection during THA.

Asunto(s)

RESUMEN

PURPOSE: This study aimed to compare bone mineral density (BMD) changes around the femoral component after total hip arthroplasty (THA) in a fully hydroxyapatite-coated stem (CORAIL) and in a tapered-wedge stem (Taperloc complete) and identify predictors of BMD changes. METHODS: This retrospective study compared 43 hips in the CORAIL group and 40 hips in the Taperloc group. The relative changes in BMD at 2 years after THA measured using dual-energy X-ray absorptiometry and the three-dimensional quantified contact states of the stem with the femoral cortical bone were assessed. Predictors of the relative change in the BMD around the proximal part of the stem were examined using multiple regression analysis. RESULTS: The decrease in BMD in Gruen zone 7 was significantly less in the CORAIL group than in the Taperloc group (P = 0.02). In the CORAIL group, the contact area in any zone was not a significant predictor of the relative changes in BMD. The contact area between the Taperloc stem and the femoral cortical bone in zones 2 and 6 was a positive predictor of the relative changes in BMD in zones 1 (P = 0.02 and P = 0.04, respectively) and 2 (P = 0.008 and P = 0.004, respectively). CONCLUSION: The CORAIL stem suppressed the postoperative BMD loss around the stem, irrespective of the contact state. The Taperloc complete stem required contact with the proximal femoral metaphysis to suppress the postoperative BMD loss around the stem.

Asunto(s)

RESUMEN

BACKGROUND: Short tapered-wedge stems have been used frequently over the past decade, but long-term follow-up data are not readily available in the literature. METHODS: A retrospective outcomes review was conducted to assess survivorship and clinical outcomes for the TRI-LOCK® Bone Preservation Stem (TRI-LOCK BPS; DePuy Synthes, Warsaw, IN, USA), a proximally coated, tapered-wedge femoral stem. RESULTS: In a cohort of 2,040 hips, Kaplan-Meier survivorship estimates (95% CI {confidence interval}; N with further follow-up, where N is the number of hips remaining at each post-operative interval), with survivorship defined as no revision of any component for any reason were 96.6% (92.8%,98.4%; 45) at eight years under the clinical assumption and 98.6% (97.9%,99.1%; 90) at 14 years under the registry assumption. With survivorship defined as stem revision for any reason, estimates were 97.7% (93.7%,99.2%; 45) at eight years under the clinical assumption and 99.2% (98.6%,99.5%; 90) under the registry assumption. Mean Harris Hip Scores and WOMAC scores were 90.08 and 21.98, respectively, at 10 years postoperatively. CONCLUSION: Our evaluation demonstrates excellent construct and stem survivorship and clinical outcomes at intermediate-term postoperative follow-up.

RESUMEN

Background: Surgeon learning curve associated with a tapered wedge femoral implant as measured by early femoral component subsidence and 90-day risk of reoperation was evaluated. Methods: The first 451 patients undergoing primary, cementless total hip arthroplasty by a single, fellowship-trained arthroplasty surgeon with a tapered wedge stem design were retrospectively reviewed. Early radiographic femoral component subsidence during the first 6 weeks postoperatively and 90-day reoperations was recorded. Results: When stratified by approach, there was no association between date of surgery and femoral component subsidence in the posterior approach (P-value for linear trend over time = 0.44). In the direct anterior approach, there was a significant association between date of surgery and early femoral component subsidence (P-value for linear trend over time = 0.01). For both approaches, there was an increase in implanted stem size relative to templated stem size over time (P < .01 and P = .03, respectively). There was no association between the date of surgery and risk of 90-day reoperation (P = .45). Conclusions: In a single surgeon's initial use of a tapered cementless wedge stem, early femoral component subsidence was not impacted by the surgeon's learning curve when the posterior approach was utilized. Although subsidence was associated with date of surgery in the direct anterior cohort, this was not associated with increased risk of 90-day reoperation. Should a surgeon adopt a new tapered-wedge stem, these findings suggest that the stem is forgiving both in relation to subsidence and 90-day reoperation risk when appropriate surgical technique is utilized.

RESUMEN

BACKGROUND: To compare the degree of stem subsidence between two different femoral component designs and to determine the risk factors associated with stem subsidence after cementless total hip arthroplasty (THA) in Dorr type C femurs. METHODS: We retrospectively reviewed 104 consecutive hips in 100 patients with Dorr type C proximal femoral morphology who underwent primary cementless THA using a fit-and-fill stem or a tapered wedge femoral stem at our institution between January 2012 and June 2021. A fit-and-fill stem was used in 55 hips and a tapered wedge stem was used in 49 hips. Radiologically, the distance between the apex of the major trochanter and the stem shoulder were measured at three different time points (immediately [0W], one week [1W], and six weeks [6W] after surgery) and the degrees of stem subsidence were assessed by comparing the distance between 0 and 1W, 1W and 6W, and 0W and 6W, respectively. RESULTS: The mean degree of stem subsidence (0W vs. 1W) was 0.24 mm (standard deviation [SD] 0.36) in the fit-and-fill stem group, and 0.23 mm (SD 0.41) in the tapered wedge stem group. There was no significant difference between the two groups (P = 0.4862). However, the mean degrees of subsidence were significantly higher in the fit-and-fill stem group (1W vs. 6W, 0.38 mm [SD 0.68]; 0W vs. 6W, 0.65 mm [SD 0.87]) than in the tapered wedge stem group (1W vs. 6W, 0.16 mm [SD 0.32]; 0W vs. 6W, 0.24 mm [SD 0.38]) (P < 0.05 for both). In addition, the rates of > 3 mm subsidence (in which instability can be observed) were 18.2% (10 of 55 hips) and 2.0% (1 of 49 hips), respectively. There was also a significant difference between the two stems (P = 0.0091). Multivariate analysis demonstrated that fit-and-fill stem was a risk factor for > 3 mm subsidence after THA in Dorr type C femurs (P = 0.0050). CONCLUSION: Our findings suggest that the tapered wedge stem is more suitable for Dorr type C femurs than the fit-and-fill stem to avoid early postoperative subsidence in cementless THA.

Asunto(s)

RESUMEN

BACKGROUND: To improve implant survival through accelerated early bone remodeling during total hip arthroplasty (THA), hydroxyapatite (HA) is widely used as a bioactive coating, which is believed to enhance initial fixation by osseointegration. We aimed to investigate the relationship between stem insertion alignment and postoperative bone mineral density (BMD) changes in patients with full hydroxyapatite-coated (HA) compaction short stem and short tapered-wedge stem. METHODS: This retrospective cohort study enrolled 115 consecutive patients (115 joints) undergoing THA using the full HA compaction short (n = 59) and short tapered-wedge (n = 56) stems. Stem alignment, including anteversion, valgus, and anterior tilt were measured by a three-dimensional template using computed tomography data. Post-operative peri-prosthetic BMD was measured by dual-energy X-ray absorptiometry. The relationship between stem alignment and BMD changes in the stems was analyzed. RESULTS: Patterns of peri-prosthetic BMD changes were similar in both groups. Stem insertion alignments of anteversion, valgus, and anterior tilt were different between the two stem types. Stem alignment of valgus and anterior tilt did not affect peri-prosthetic BMD in either of the stem type. An absolute anteversion difference between stem anteversion and original canal anteversion caused significant peri-prosthetic BMD loss in Gruen zones one and seven in the tapered-wedge stem. However, stem alignment of absolute anteversion difference did not affect BMD changes in the HA compaction stem. CONCLUSIONS: Peri-prosthetic bone remodeling remained unaffected by stem alignment after THA with the new short full HA compaction stem.

Asunto(s)

RESUMEN

PURPOSE: We aimed to investigate the differences in peri-prosthetic bone remodelling between the full hydroxyapatite (HA)-collared compaction short stem and the short tapered-wedge stem. METHODS: This retrospective cohort study enrolled 159 consecutive patients (159 joints) undergoing total hip arthroplasty (THA) using the full HA compaction short (n = 64) and short tapered-wedge (n = 95) stems. Body mass index (BMI), peri-prosthetic bone mineral density (BMD), and clinical factors, including the Japanese Orthopaedic Association score and the University of California Los Angeles (UCLA) activity score were assessed and compared. RESULTS: Stem related complications were seen in three cases. Both groups showed similar peri-prosthetic BMD changes. Peri-prosthetic BMD was almost maintained in the distal femur and Gruen zone 6 with both type of stems, but significant BMD loss was found in zones 1 and 7 in both groups and in zone 2 of the full HA compaction stem group. No significant correlations were found between the proximal femoral BMD changes and the age, BMI, and UCLA score in both the full HA compaction and tapered-wedge stem groups. Femoral bone shape affected the peri-prosthetic BMD changes in the tapered-wedge stem group but not in the full HA compaction group. The stem collar of the full HA compaction stem did not affect peri-prosthetic BMD, but unique bone remodelling in the calcar region was observed in 27.6% cases. A significant difference in the peri-prosthetic BMD changes at Gruen zone 2 was found in patients with or without thigh pain. CONCLUSION: Peri-prosthetic bone remodelling remained unaffected by clinical and radiographic factors after THA with the new short full HA compaction stem. Therefore, this new stem may be useful in a variety of cases.

Asunto(s)

RESUMEN

BACKGROUND: Whether different body positions during surgery affect postoperative stem alignment in total hip arthroplasty (THA) remains unclear. The purpose of this study was to clarify differences in tapered wedge stem alignment between supine and lateral positions in THA under the modified Watson-Jones anterolateral approach. METHODS: We reviewed 242 consecutive, primary cementless THAs performed with ceramic-on-cross-linked polyethylene via the modified Watson-Jones approach in either supine or lateral positions between 2009 and 2015 (supine group: 113 cases; lateral group: 129 cases). No specific reasons to select supine or lateral positions for the surgery were given during the study period. Computed tomography was performed pre- and postoperatively to measure preoperative femoral anteversion and postoperative stem anteversion, respectively. Stem alignment in coronal and sagittal planes was also evaluated. RESULTS: Mean difference in stem anteversion and femoral anteversion was 8.6 ± 9.4 in the supine position and 13.0 ± 11.4 in the lateral position (p = 0.0013). Although no significant difference was seen between groups for stem alignment in the coronal plane, flexed implantation was more likely in the supine group (46/113, 40.7%) than in the lateral group (20/129, 15.5%). A significant correlation was found between femoral anteversion and stem anteversion in both the supine and lateral groups (r = 0.68, p < 0.0001 and r = 0.52, p < 0.0001, respectively). CONCLUSION: Although stem anteversion was more strongly correlated with femoral anteversion in the supine position than in the lateral position, neutral position in the sagittal plane was more likely to be found with the lateral position than with the supine position. Surgeons can achieve ideal stem positioning by considering these results in the modified Watson-Jones approach in both the supine and lateral positions.

Asunto(s)

RESUMEN

BACKGROUND: We aimed to compare radiographic and digital tomosynthesis assessments of early biological fixation of a cementless stem in primary total hip arthroplasty and to investigate the factors associated with early biological fixation. METHODS: Seventy-three patients underwent total hip arthroplasty using cementless short tapered-wedge stems. Both radiography and digital tomosynthesis were performed at 6 weeks and 3, 6, 12, and 24 months after surgery. The presence of spot welds (SW) was evaluated at each postoperative period to assess biological fixation between the stem and the femur. The area of contact between the femur and the stem was divided into seven zones based on Gruen's zone classification. RESULTS: All 73 patients had no SW 6 weeks after surgery on radiography and digital tomosynthesis. Three months postoperatively, there was no SW on radiography; however, digital tomosynthesis revealed SW in 31 (42%) patients. Six months postoperatively, radiography showed 22 SW in 18 (24.7%) patients and digital tomosynthesis showed 94 SW in 48 patients (65.8%). CONCLUSION: Digital tomosynthesis detected biological fixation between the stem and femur earlier than radiography; biological fixation may appear within 3 months after surgery.

Asunto(s)

RESUMEN

BACKGROUND: Differences in proximal femoral morphology between ethnicities may have implications on the design of cementless tapered wedge stems. This study analyses the differences in Asian and Caucasian bone morphology as well as the related fit of various cementless tapered wedge stem designs. METHODS: A computed tomography database and modelling software was used to retrospectively analyse a total of 1345 femora. Ethnicity related comparisons as well as the fit of the stem designs were analysed. RESULTS: Statistically significant differences between canal shape of Caucasian and Japanese as well as non-Japanese Asians were observed. The fit of the stems within the femoral canal was highly dependent on the respective stem shape. CONCLUSIONS: The shape differences in stem designs had a larger influence on the fit within the femoral canal than the differences in ethnicity related to bone morphology.

Asunto(s)

RESUMEN

PURPOSE: The mechanisms underlying thigh pain in patients with well-fixed cementless femoral components after total hip arthroplasty (THA) remains unclear. We hypothesized that the thigh pain is correlated with the initial contact state of the stem and aimed to investigate the relation between thigh pain and the initial contact state. MATERIALS AND METHODS: A total of 209 hips of 184 patients were analysed in this retrospective case-control study. The patients were divided into a thigh pain group (n = 13 hips) and a control group (without thigh pain, n = 196). Post-operative stem contact images were three-dimensionally visualized by a density mapping function using computed tomography data, which quantified the stem contact area according to Gruen zones. Thigh pain was defined as anterior or anterolateral pain upon loading at 3-month post-operatively. RESULTS: Thirteen hips (6.2%) had thigh pain; however, all the hips demonstrated stable bony ingrowth radiographically. The thigh pain group had a significantly lower contact area in zone 2 (p = 0.014). The multivariate logistic regression analysis showed that the contact area of zone 2 was negatively correlated with thigh pain [odds ratio (OR): 0.858, p = 0.018], and the canal flare index was negatively correlated with the development of thigh pain (OR: 0.336, p = 0.026). CONCLUSIONS: We identified an association between the initial contact state and post-operative thigh pain. Our data demonstrated that proper lateral contact prevents the occurrence of thigh pain in THA using a tapered wedge stem.

Asunto(s)

RESUMEN

BACKGROUND: Intraoperative femoral fractures are well-known but often overlooked complications in total hip arthroplasty (THA). We examined outcomes of cerclage cabling for intraoperative calcar cracks in THA with cementless tapered wedge stems. METHODS: In total, 4928 primary THAs were performed using broach-only, tapered wedge stems between January 2007 and November 2017 in a single institution. Of these, we identified 71 intraoperative calcar cracks (69 patients) managed by 2-mm cerclage cables. Clinical outcomes, amount of stem subsidence, and implant survivorship of the calcar crack group (68 THAs) were compared with those of the matched control group (68 THAs) without intraoperative fractures. Multivariate analysis was performed to identify potential risk factors for stem subsidence >3 mm. RESULTS: The mean stem subsidence was greater in the calcar crack group (2.0 vs 1.2 mm, P = .021), whereas revision-free survivorships of THA were similar between groups at 6 years (98.5% vs 98.4%; log-rank, P = .987). In the calcar crack group, a Dorr type C femur and the absence of cabling proximal to the lesser trochanter (LT) were identified as independent risk factors for stem subsidence >3 mm. For the subgroup with 42 calcar cracks managed by a single cable applied proximal to the LT, revision-free survivorship of THA was 100% at 6 years. There was no complete radiolucency to indicate aseptic stem loosening in either group. CONCLUSION: The application of a single cable proximal to the LT of the femur for intraoperative calcar cracks demonstrated 100% revision-free survivorship with lower stem subsidence in THA with tapered wedge stems.

Asunto(s)

RESUMEN

BACKGROUND: There is a lack of understanding on relationship between the femoral geometry and outcomes of total hip arthroplasty (THA). We investigated clinical and radiographic outcomes of THA using a cementless tapered wedge stem in patients with Dorr type A proximal femoral morphology and compared with those of type B femurs at a minimum follow-up of 5 years. METHODS: We analyzed 1089 hips (876 patients) that underwent THA using an identical cementless tapered wedge stem. We divided all femurs into 3 types (Dorr type A, B, and C). Type A and B femurs were statistically matched with age, gender, body mass index, and diagnosis by using propensity score matching. Clinical, radiographic results, and stem survivorship were compared between the matched 2 groups. RESULTS: A total of 611 femurs (56%) were classified as type A, 427 (39%) as type B, and 51 (5%) as type C. More radiolucent lines around femoral stems were found in type A femurs (7.8%) than in type B femurs (2.5%) (P < .001). Patients with radiolucency showed worse Harris Hip Score (86.2 points) compared with those without radiolucency (93.0 points) (P < .001). The stem survivorship of type A femur (97.8%) was lower than that of type B femur (99.5%) (P = .041). The reasons for femoral revision in type A femurs were periprosthetic fracture (67%), aseptic loosening (22%), and deep infection (11%). CONCLUSIONS: This study showed a higher rate of complications after THAs using a cementless tapered wedge stem in Dorr type A femurs than those performed in type B femurs.

Asunto(s)

RESUMEN

INTRODUCTION:: Hemiarthroplasty is the preferred treatment for displaced femoral neck fractures in elderly patients. Recently, short tapered-wedge cementless stems have increasingly been used in this population. However, historic data has consistently shown higher rates of periprosthetic fracture with uncemented stems in hip fracture patients. This study aims to evaluate the rate of periprosthetic fracture requiring re-operation and all-cause mortality between cemented and uncemented femoral stem designs including more recent short tapered-wedge cementless stems in hip fracture patients. METHODS:: A retrospective chart and radiographic review of patients received bipolar hemiarthroplasty for femoral neck fractures from 2010-2016. Patients biologically (age ≥ 65 years) or physiologically (American Society of Anesthesiologists (ASA) class ≥ 3) elderly were eligible. The uncemented group was subdivided into tapered-wedge stems (a broach only system) and reamed uncemented stems. The primary outcome was periprosthetic fracture requiring re-operation. RESULTS:: We included 657 patients in total, with 296 and 361 patients in the uncemented and cemented stem groups respectively. In the uncemented group there were 197 tapered-wedge and 99 reamed uncemented stems. There was a significantly higher rate of periprosthetic fracture requiring re-operation in the uncemented group (3.0% vs. 0.6%) ( p ≤ 0.05). There were no significant differences in rates of all-cause mortality, infection or all-cause re-operation. CONCLUSIONS:: Compared to modern uncemented femoral stem designs, cemented stems yield lower rates of periprosthetic fracture requiring re-operation, without increasing risk of all-cause mortality. Tapered-wedge stems had similar rates of re-operation due to periprosthetic fracture as reamed uncemented stems.

Asunto(s)

RESUMEN

INTRODUCTION: The influence of stem sagittal alignment on clinical outcomes is unclear in total hip arthroplasty (THA). The purpose of this study is to assess the relationship between stem sagittal alignment and clinical and radiographic outcomes using 3D-CT. MATERIALS AND METHODS: We performed 370 consecutive primary THAs between 2009 and 2013. After exclusion, 102 hips in 89 patients using single tapered-wedge stem were included. Mean follow-up was 4.7 years. Stem sagittal alignment was measured using CT, and patients were divided into flexion and neutral alignment groups. Clinical and radiographic outcomes were compared between two groups. Furthermore, we evaluated the anterior femoral offset and initial contact state. RESULTS: There were no significant differences in clinical or radiographic outcomes between two groups. CT data analysis and multiple regression analysis showed flexion alignment increased anterior femoral offset (AFO) and Gruen zone 4 contact area. CONCLUSIONS: There was no significant difference in clinical or radiographic outcomes between flexion and neutral alignment of the tapered-wedge stem at an average of 4.7 years of follow-up. The increase of AFO and distal contact area in flexion alignment could affect the improvement of impingement-free range of flexion and intraoperative fracture.

Asunto(s)

RESUMEN

The short tapered-wedge stem is popular worldwide because it potentially preserves more bone stock during total hip arthroplasty (THA). However, stem version mismatch may affect physiological stress distribution. In this study, we analyzed the correlations between periprosthetic bone mineral density (BMD) changes and anteversion mismatch in patients who underwent THA using a short tapered-wedge stem. The study included 44 patients (44 joints) who underwent THA with a Tri-Lock stem. At baseline and at 6 and 24 months postoperatively, the BMDs in the seven Gruen zones were evaluated using dual-energy X-ray absorptiometry. BMD changes and stem alignment, that is, anteversion and stem anteversion mismatch to the anatomical canal anteversion, were analyzed. Significant negative correlations were found between BMD changes and absolute anteversion error in Gruen zones 1 and 7 at 6 and 24 months postoperatively (zone 1, 6M; RR= -0.48, p < 0.001) (zone 7, 6M; RR= -0.46, p = 0.002) (zone 1, 24M; RR= -0.47, p = 0.001) (zone 7, 24M; RR= -0.40, p = 0.007). We further demonstrated that excessive stem anteversion mismatch to the anatomical canal anteversion causes stem point contact with the cortical bone in the distal portion and affected proximal periprosthetic BMD loss after THA. We recommend that the native anatomical anteversion angle should be used as a reference for inserting the tapered-wedge stems.

Asunto(s)

RESUMEN

BACKGROUND: Intraoperative fractures during total hip arthroplasty (THA) are more common when using cementless stems. The purpose of this study was to investigate the impact of a new shorter second-generation cementless, tapered wedge stem with improved proximal femoral fit in reducing the incidence of intraoperative fracture. METHODS: A retrospective study was conducted on primary THA cases performed at a single institution using a first-generation or second-generation cementless stem from 2006-2016. All intraoperative femur fractures were identified, as well as early 30-day postoperative periprosthetic femur fractures, which could represent nondisplaced intraoperative fractures that were initially missed. Risk for intraoperative femur fracture was analyzed using logistic regression, accounting for demographic covariates and surgeon. RESULTS: Of 6473 primary THA performed with a cementless, tapered wedge stem during the study period, 3126 used a first-generation stem and 3347 used a second-generation stem. The incidence of intraoperative fracture was 1.79% for first-generation stems and 0.24% for second-generation stems, representing a 7.5-fold reduction of risk for fracture. After accounting for covariates, the odds of intraoperative fracture were 0.33 using the second-generation stem relative to the first-generation stem (P = .01). However, there was no significant difference in the odds of early 30-day postoperative fractures using the second-generation stem (odds ratio 0.93, P = .56). CONCLUSION: A new second-generation cementless stem resulted in a 7.5-fold decrease in the incidence of intraoperative femur fracture compared with the preceding stem.

Asunto(s)

RESUMEN

BACKGROUND: Intraoperative femur fracture (IFF) is a well-known complication in primary uncemented total hip arthroplasty (THA). Variations in implant instrumentation design and operative technique may influence the risk of IFF. This study investigates IFF between a standard uncemented tapered-wedge femoral stem and its second-generation successor with the following design changes: size-specific medial curvature, proportional incremental stem growth, modest reduction in stem length, and distal lateral relief. METHODS: A single experienced surgeon's patient database was retrospectively queried for IFF occurring during primary uncemented THA using a standard tapered-wedge femoral stem system or a second-generation stem. All procedures were performed using soft tissue preserving anatomic capsule repair and posterior approach. The primary outcome measure was IFF. A z-test of proportions was performed to determine significant difference between the 2 stems with respect to IFF. Patient demographics, Dorr classification, and implant characteristics were also examined. RESULTS: Forty-one of 1510 patients (2.72%) who received a standard tapered-wedge femoral stem sustained an IFF, whereas 5 of 800 patients (0.63%) using the second-generation stem incurred an IFF. No other significant associations were found. CONCLUSION: A standard tapered-wedge femoral stem instrumentation system resulted in greater than 4 times higher incidence of IFF than its second-generation successor used for primary uncemented THA. Identifying risk factors for IFF is necessary to facilitate implant system improvements and thus maximize patient outcomes.

Asunto(s)