RESUMEN

ABSTRACT Introduction: Surgically assisted rapid palatal expansion (SARPE) has been the treatment of choice in subjects presenting skeletally mature sutures. Objective: The purpose of this study was to analyze stress distribution and displacement of the craniofacial and dentoalveolar structures resulting from three types of palatal expanders with surgical assistance using a non-linear finite element analysis. Material and Methods: Three different palatal expanders were designed: Model-I (tooth-bone-borne type containing four miniscrews), Model-II (tooth-bone-borne type containing two miniscrews), and Model-III (bone-borne type containing four miniscrews). A Le Fort I osteotomy was performed, and a total of 5.0 mm palatal expansion was simulated. Nonlinear analysis (three theory) method (geometric nonlinear theory, nonlinear contact theory, and nonlinear material methods) was used to evaluate stress and displacement of several craniofacial and dentoalveolar structures. Results: Regardless of the maxillary expander device type, surgically assisted rapid palatal expansion produces greater anterior maxillary expansion than posterior (ANS ranged from 2.675 mm to 3.444 mm, and PNS ranged from 0.522 mm to 1.721 mm); Model-I showed more parallel midpalatal suture opening pattern - PNS/ANS equal to 54%. In regards to ANS, Model-II (1.159 mm) and Model-III (1.000 mm) presented larger downward displacement than Model-I (0.343 mm). PNS displaced anteriorly more than ANS for all devices; Model-III presented the largest amount of forward displacement for PNS (1.147 mm) and ANS (1.064 mm). All three type of expanders showed similar dental displacement, and minimal craniofacial sutures separation. As expected, different maxillary expander designs produce different primary areas and levels of stresses (the bone-borne expander presented minimal stress at the teeth and the tooth-bone-borne expander with two miniscrews presented the highest). Conclusions: Based on this finite element method/finite element analysis, the results showed that different maxillary expander designs produce different primary areas and levels of stresses, minimal displacement of the craniofacial sutures, and different skeletal V-shape expansion.

RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) tem sido o tratamento de escolha em indivíduos que apresentam suturas esqueleticamente maduras. Objetivo: O objetivo deste estudo foi avaliar, utilizando uma análise não linear com elementos finitos, a distribuição de tensões e os deslocamentos das estruturas craniofaciais e dentoalveolares gerados por três tipos de expansores palatinos usados na ERMAC. Material e Métodos: Três tipos de expansores palatinos foram projetados: Modelo I (dento-osseossuportado com quatro mini-implantes), Modelo II (dento-osseossuportado com dois mini-implantes) e Modelo III (osseossuportado com quatro mini-implantes). Uma osteotomia Le Fort I foi realizada e foi simulada uma expansão palatina total de 5,0 mm. Um método de análise não linear (três teorias - teoria da não-linearidade geométrica, teoria do contato não linear e métodos para materiais não lineares) foi utilizado para avaliar a tensão e o deslocamento de diversas estruturas craniofaciais e dentoalveolares. Resultados: Independentemente do tipo de aparelho expansor palatino, a ERMAC produziu maior expansão anterior da maxila do que posterior (ENA variou de 2,675 mm a 3,444 mm e ENP variou de 0,522 mm a 1,721 mm); o Modelo I apresentou padrão de abertura mais paralela da sutura palatina mediana, com ENP/ENA igual a 54%. Com relação à ENA, o Modelo II (1,159 mm) e o Modelo III (1,000 mm) apresentaram maior deslocamento para baixo do que o Modelo I (0,343 mm). A ENP deslocou-se mais para anterior do que a ENA com todos os aparelhos; o Modelo III apresentou o maior deslocamento para anterior da ENP (1,147 mm) e da ENA (1,064 mm). Os três tipos de expansores apresentaram deslocamento dentário semelhante e separação mínima das suturas craniofaciais. Como esperado, diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensões (o expansor osseossuportado apresentou tensão mínima nos dentes, e o expansor dento-osseossuportado com dois mini-implantes apresentou o maior). Conclusões: Com base nesse estudo de elementos finitos, os resultados mostraram que diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensão, com deslocamento mínimo das suturas craniofaciais e diferentes expansões esqueléticas em forma de V.

RESUMEN

The aim of this study was to investigate buccolingual tooth movements (tipping/translation) in surgical and nonsurgical posterior crossbite correction. A total of 43 patients (f/m 19/24; mean age 27.6 ± 9.5 years) treated with surgically assisted rapid palatal expansion (SARPE) and 38 patients (f/m 25/13; mean age 30.4 ± 12.9 years) treated with dentoalveolar compensation using completely customized lingual appliances (DC-CCLA) were retrospectively included. Inclination was measured on digital models at canines (C), second premolars (P2), first molars (M1), and second molars (M2) before (T0) and after (T1) crossbite correction. There was no statistically significant difference (p > 0.05) in absolute buccolingual inclination change between both groups, except for the upper C (p < 0.05), which were more tipped in the surgical group. Translation, i.e., bodily tooth movements that cannot be explained by pure uncontrolled tipping, could be observed with SARPE in the maxilla and with DC-CCLA in both jaws. Dentoalveolar transversal compensation with completely customized lingual appliances does not cause greater buccolingual tipping compared to SARPE.

RESUMEN

Adults presenting with transverse maxillomandibular discrepancies in Class III skeletal patterns, asymmetries and anterior open bite can be challenging to treatment plan and manage. Therefore, they often necessitate a multidisciplinary approach, with surgical input from the oral and maxillofacial team. It can be difficult to assess how much the maxilla needs to be expanded after surgery in these patients, as the upper and lower teeth cannot be brought into occlusion. We aim to discuss the use of a device we have come to call the 'Powerbite', which is used intra-orally to assess the expansion of the maxilla after surgically assisted rapid palatal expansion (SARPE) and establish when expansion is sufficient to accommodate the mandibular arch. This device is not novel, last described in 1986 in the Journal of Orthodontics.

Asunto(s)

RESUMEN

The aim of this study was to compare the crossbite correction of a group (n = 43; f/m 19/24; mean age 27.6 ± 9.5 years) with surgically assisted rapid palatal expansion (SARPE) versus a non-surgical transversal dentoalveolar compensation (DC) group (n = 38; f/m 25/13; mean age 30.4 ± 12.9 years) with completely customized lingual appliances (CCLA). Arch width was measured on digital models at the canines (C), second premolars (P2), first molars (M1) and second molars (M2). Measurements were obtained before treatment (T0) and at the end of lingual treatment (T1) or after orthodontic alignment prior to a second surgical intervention for three-dimensional bite correction. There was no statistically significant difference (p > 0.05) in the amount of total crossbite correction between the SARPE and DC-CCLA group at C, P2, M1 and M2. Maxillary expansion was greater in the SARPE group and mandibular compression was greater in the DC-CCLA group. Crossbite correction in the DC-CCLA group was mainly a combination of maxillary expansion and mandibular compression. Dentoalveolar compensation with CCLAs as a combination of maxillary expansion and mandibular compression seems to be a clinically effective procedure to correct a transverse maxillo-mandibular discrepancy without the need for surgical assistance.

RESUMEN

The study aims to investigate the modifications in the temporalis and the masseter activity in adult patients before and after SARPE (Surgically Assisted Rapid Palatal Expansion) by measuring electromyographic and electrokinesographic activity. 24 adult patients with unilateral posterior crossbite on the right side were selected from the Orthodontic Department of the University of Milan. Three electromyographic and electrokinesographic surface readings were taken respectively before surgery (T0) and 8 months after surgery (T1). The electromyographic data of both right and left masseter and anterior temporalis muscles were recorded during multiple tests: standardized maximum voluntary contraction (MVC)s, after transcutaneous electrical nerve stimulation (TENS) and at rest. T0 and T1 values were compared with paired Student's t-test (p < 0.05). Results: Significant differences were found in the activity of right masseter (p = 0.03) and right temporalis (p = 0.02) during clench, in the evaluation of right masseter at rest (p = 0.03), also the muscular activity of masseters at rest after TENS from T0 to T1 (pr = 0.04, pl = 0.04). No significant differences were found in the activity of left masseter (p = 0.41) and left temporalis (p = 0.39) during clench and MVC, in the evaluation of left masseter at rest (p = 0.57) and in the activity during MVC of right masseter (p = 0.41), left masseter (p = 0.34), right temporalis (p = 0.51) and left temporalis (p = 0.77). Results showed that the activity of the masseter and temporalis muscles increased significantly after SARPE during rest and clenching on the side where the cross-bite was treated.

RESUMEN

OBJECTIVES: To evaluate dental and skeletal changes caused by surgically assisted rapid palatal expansion (SARPE) using the superimposition of three-dimensional cone-beam computed tomography (CBCT) images on the cranial base. MATERIAL AND METHODS: This is a retrospective quasi-experiment before-and-after study using a convenience sample. Twenty-four adult patients (13 male and 11 female) were evaluated before SARPE (T0), immediately after expansion (T1), and after 6 months of retention (T2). CBCT scans were superimposed on the anterior cranial base using voxel-based registration. Measurements from different reference points were used for comparisons between times. RESULTS: At T1, all teeth had significant buccal tipping. At T2, most teeth remained in the same position as at T1, except the first premolar and the first molar, whose buccal roots moved slightly. The amount of bony expansion was 65 to 70% of the amount of tooth movement. The A point and maxillary incisors moved anteriorly from T0 to T1 and T2 (p < 0.0001). Inter-nasal distance had increased significantly at T1 (p < 0.0001) and remained stable at T2 (p = 0.478). No expansion was achieved at the zygomatic arch (p = 0.114). CONCLUSION: SARPE promoted substantial buccal tipping of posterior teeth and some bone displacement; it also moved the maxilla and teeth forward and increased nasal width. CLINICAL RELEVANCE: No other clinical studies have evaluated dental and skeletal changes caused by SARPE using superimposition of 3D CBCT images on the cranial base. This study findings may help clinical dentists plan treatments using safe and reliable information.

Asunto(s)

RESUMEN

ABSTRACT Introduction: Surgically Assisted Rapid Palatal Expansion (SARPE) promote maxillary expansion in skeletally mature patients. This technique is effective; however, some side effects are still unknown. Objectives: evaluate the presence of alveolar defects (dehiscences and fenestrations) in patients submitted to the SARPE. The null hypothesis tested was: SARPE does not influence the number of dehiscences and fenestrationss. Methods: A retrospective quasi-experiment study of a convenience sample of 279 maxillary teeth, in 29 patients evaluated with Cone Beam Computed Tomography (CBCT) at T1 (before SARPE), T2 (after expansion) and T3 (after retention), was performed. The examined teeth were: canines, first and second premolars, first and second molars. in axial, coronal, and cross-sectional views. The evaluations involved viewing slices from mesial to distal of the buccal roots. Results: All statistical analyses were performed using SAS 9.3 and SUDAAN softwares. Alpha used in the study was 0.05. Alveolar defects increased statistically from T1 (69.0%) to T2 (96.5%) and T3 (100%). Dehiscences increased 195% (Relative Risk 2.95) at the end of expansion (T2). After retention (T3), individuals were on average 4.34 times more likely to develop dehiscences (334% increase). Fenestrations did not increase from T1 to T2 (p = 0.0162, 7.9%) and decreased from T2 to T3 (p = 0.0259, 4.3%). Presence of fenestrations at T1 was a significant predictor for the development of dehiscences in T2 and T3. Dehiscences increased significantly in all teeth, except second molars. Conclusion: The null hypothesis was rejected. After SARPE the number of dehiscences increased and fenestrations decreased. Previous alveolar defects were predictor for dehiscences after SARPE.

RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) promove expansão em pacientes esqueleticamente maduros. Essa técnica é efetiva; entretanto, alguns efeitos colaterais ainda são desconhecidos. Objetivos: Avaliar a presença de defeitos alveolares (deiscência e fenestração) em pacientes submetidos à ERMAC. A hipótese nula testada foi que a ERMAC não influenciaria o número de deiscências e fenestrações. Métodos: Foi realizado um estudo quase-experimental de uma amostra de conveniência de 279 dentes superiores, de 29 pacientes que foram avaliados por meio de tomografia computadorizada de feixe cônico (TCFC) em T1 (antes da ERMAC), T2 (após expansão) e T3 (após contenção). Caninos, primeiros e segundos pré-molares, primeiros e segundos molares foram examinados em cortes axiais, coronais e sagitais. As raízes vestibulares desses dentes foram avaliadas da face mesial até a distal. Resultados: Todas as análises estatísticas foram realizadas usando os softwares SAS 9.3 e SUDAAN. O alfa usado no estudo foi de 0,05. Os defeitos alveolares aumentaram significativamente de T1 (69,0%) para T2 (96,5%) e T3 (100%). Deiscências aumentaram 195% (risco relativo de 2,95%) no final da expansão (T2). Após contenção (T3), os pacientes tiveram, em média, 4,34 vezes mais chance de desenvolver deiscência (334% de aumento). As fenestrações não aumentaram de T1 para T2 (p= 0.0162, 7.9%) e diminuíram de T2 para T3 (p = 0.0259, 4,3%). A presença de fenestrações em T1 foi um preditor significativo para o desenvolvimento de deiscências em T2 e T3. Deiscências aumentaram significativamente em todos os dentes, exceto nos segundos molares. Conclusão: A hipótese nula foi rejeitada. Após a ERMAC, o número de deiscências aumentou e o de fenestrações diminuiu. Defeitos alveolares prévios foram preditores de deiscências após a ERMAC.

RESUMEN

The outcome of surgically assisted rapid palatal expansion (SARPE) can be affected by pterygomaxillary disjunction (PMD) and the distractor position. In this study, SARPE was performed, with or without PMD, in 20 fresh cadaver heads. Transverse expansion was conducted twice using a bone-borne distractor in the anterior and posterior positions, resulting in four groups (n=10). Cone beam computed tomography scans were completed before and after SARPE to evaluate maxillary changes. A comparative anterior decrease and posterior increase in midpalatal opening resulted from SARPE with PMD combined with a posteriorly placed distractor. Significant differences in the internal transverse changes were found between the two SARPE techniques combined with an anterior distractor at the level of the premolars and molars for alveolar ridge width (P=0.040, P=0.024), and at the level of the molars for the dental crown width (P=0.017) and corresponding tooth cusp width (P=0.018). In contrast, using a posteriorly placed distractor led to a significant difference for tooth cusp width only (P=0.050). No statistically significant differences were found between external transverse changes or between distractor positions. PMD is more important in achieving a more uniform and parallel transverse expansion pattern than the distractor position. However, a posterior distractor seems to intensify the effects of PMD.

Asunto(s)

RESUMEN

Maxillary transverse deficiency is a common skeletal problem. When the patient is younger, it is treated by rapid palatal expansion by using orthodontic appliances. If this fails or the patient is older, which means skeletal growth is completed, surgically aided rapid palatal expansion (SARPE) becomes necessary. In this technique, after the osteotomies have been made, the two maxillary bones are distracted by tooth-borne device. Since a tooth-borne device will apply the distraction forces on the teeth, the pulp volumes may change. Our aim was to investigate the volume changes of the tooth pulps after SARPE in which a tooth-borne device was used. We scanned our database and included 20 patients (7 males and 13 females) aging between 16 and 30 (mean 19.5±3.97) to this retrospective study. All the patients had undergone SARPE surgeries and they had pre-surgery and postconsolidation cone beam computerized tomography (CBCT) images. All the surgeries had been done in similar ways; all the patients had used similar tooth-borne modified acrylic bonded expansion device. We divided the maxillary teeth into three groups: the incisors, the premolars and the molars. We imported the CBCT images of each patient into 3D Slicer software. We calculated volumes of pulps for all maxillary teeth. We compared volumes with paired t test. Statistical significance level was accepted as P< .05. The devices had been left in place between 83 and 179 days including distraction and consolidation periods (mean 121.35±27.83 days). Amount of the expansions varied between 6.03mm and 11.16mm (mean 7.19±1.18mm). We found a statistically significant decrease of the pulp volumes in incisor, premolar and molar teeth (P<.001) between pre-surgery and postconsolidation periods. When using tooth-borne devices in SARPE, their impacts on teeth pulps should also be considered.

Asunto(s)

RESUMEN

BACKGROUND: Transverse maxillomandibular discrepancies are widespread. Treatment is comprised of orthodontic expansion in patients younger than 15 years or by surgically assisted rapid palatal expansion (SARPE) in skeletally mature patients where the possibility of successful orthodontic maxillary expansion decreases as sutures close and resistance to mechanical forces increases. AIM: To present our experience of treating transverse maxillary deficiency using a unique L-shaped osteotomy and to demonstrate stable results. PATIENTS AND METHODS: 32 patients aged between 19 and 54 years exhibiting transverse maxillary deficiency. L-shaped osteotomy was performed laterally from the pterygoid plate posteriorly to above the roots of the second incisive anteriorly continuing with a vertical osteotomy between the lateral incisive and canine teeth toward the horizontal osteotomy. In 18 patients with dysgnathia, bimaxillary surgery was performed one year following the SARPE procedure. RESULTS: Mean transverse maxillary expansion of 6.2mm at the canine incisal and 6.4mm at the first molar occlusal regions were obtained. One year postoperatively results were relatively stable, 5.8mm and 6.2mm respectively. The SARPE procedure resulted in overcoming the maxillary buttress resistance, expansion of the anterior dental arch and bilateral distraction creating bone on both sides of the premaxilla contributing to better alignment of the anterior teeth and superior stability. CONCLUSIONS: We conclude that SARPE is an effective and stable method for addressing severe maxillary transverse discrepancy in adults while the unique osteotomy performed allowed for maintaining proper position of the premaxilla and maxillary midline and allowing for division of the newly created bone bilaterally thus resulting in a more stable outcome.

RESUMEN

Endotracheal tube damage is a well-known complication of maxillary surgery. We report a case of failure to ventilate due to superficial damage to the tubing between the cuff and pilot balloon in the nasal portion of a north facing Ring, Adair and Elwyn pre-formed endotracheal tube during Surgically Assisted Rapid Palatal Expansion surgery. The endotracheal tube was replaced uneventfully and surgery completed successfully. On reflection, we feel that that the vulnerable position of the cuff-pilot tubing significantly contributed to this critical incident and suggest that increased recognition of this is vital for the prevention of such cases in the future.

RESUMEN

@#Transverse maxillary deficiency is a common malocclusion in the clinic. Palatal expansion techniques are commonly used in the treatment of maxillary transverse deficiency. Traditional palatal expansion techniques have good effects on the treatment of children and adolescents whose palatal suture has not yet closed, but the effects on adult patients are unsatisfied. New palatal expansion techniques, such as miniscrew-assisted rapid palatal expansion and surgical-assisted maxillary expansion, have increased the age-related indications for palatal expansion, and their bone expansion effect has been strengthened. With the development of CAD/CAM technology and 3D printing technology, techniques such as Invisalign and personalized appliances have been developed and have promising application prospects. To provide references for the clinical treatment of maxillary transverse deficiency, palatal expansion techniques are reviewed from the following aspects: mechanism and indications, expansion pattern, traditional and new palatal expansion appliances, stability and retention of palatal expansion, outlook of future expanders, etc.

RESUMEN

BACKGROUND: Maxillary skeletal expander is a non-surgical expansion technique of the maxilla. It is different from the traditional maxillary rapid expander, micro-implant assisted rapid palatal expansion, and surgically assisted rapid palatal expansion. It provides new ideas and methods for the correction of maxillary transverse deficiency, and especially for adult patients with the growth finished, provides an efficient and minimally invasive bone expansion. OBJECTIVE: To review the application and advantage of the maxillary skeletal expander in the treatment of maxillary transverse deficiency, providing scientific reference for the clinical therapeutic schedule in such patients. METHODS: A computer search for Cochrane Library, PubMed, Embase, Web of Science, CNKI, WanFang Database, and CBM databases was performed for Chinese and English literature related to the maxillary expansion device published before May 31st, 2019. RESULTS AND CONCLUSION: The maxillary skeletal expander is an effective method for correcting the maxillary transverse deficiency, and the expansion of the arch is not limited by age. This device also has a good outcome in bone expansion for adults. The maxillary skeletal expander expands the entire mid-face structure, causing the mid-sacral suture to be parallel, followed by ruptured palatine suture, increased width between the zygomatic bones, as well as the entire nasal cavity involving the upper nasal bone area is widened. This device also causes less adverse reactions, for example, the teeth are inclined buccally and the height of the alveolar bone is reduced.

RESUMEN

Distraction osteogenesis (DO) is a surgical procedure to increase bone height in different body parts. DO includes a surgical incision, wherein the bone is cut and a device is installed for further separation of the two ends by gradual unscrewing of the device screw. New bone gradually forms and fills the gap, and the bone height increases as such. Photobiomodulation (PBM) or low-level laser therapy (LLLT) enhances the formation of soft and hard tissue such as bone and can, therefore, accelerate the process of DO and shorten the duration of different surgical phases of DO such as latency, activation, and consolidation. Different laser types with variable exposure settings and protocols have been used for this purpose. The gallium-aluminum-arsenide (GaAlAs) diode laser is the most commonly used laser type for LLLT. This study reviews 18 published articles on the effects of LLLT on DO and summarizes their findings to further elucidate this topic.

RESUMEN

The aim of this study was to evaluate the effectiveness of combined orthodontic and surgical treatment of patients with maxillary transverse deficiency. Forty cone-beam computed tomograms (CBCT) were examined in 20 patients (mean age 23.5 years) who underwent surgically assisted rapid palatal expansion using a tooth-borne appliance (n=10) and a bone-borne appliance (n=10). Evaluation of the effectiveness of skeletal expansion was carried out with the help of cephalometric analysis of the width of the upper jaw in the coronary projection on the CBCT by 22 parameters. Analysis of the degree of skeletal expansion of the upper jaw before treatment and after removal of the expander allowed to assess the degree of expansion of the upper jaw at different bone levels. Surgically assisted rapid palatal expansion allows to achieve stable skeletal expansion of the upper jaw in the transverse direction with minimal risk of long-term relapse.

Asunto(s)

RESUMEN

Vascular injuries after orthognathic surgery are rare, and mainly occur in young adults after Le Fort I osteotomies. We report the case of a 14-year-old girl who presented with life-threatening epistaxis one week after a surgically-assisted rapid palatal expansion (SARPE) followed by activation of a transpalatal distractor. Definitive treatment was superselective, catheter-directed, glue-embolisation of a bleeding bilobar pseudoaneurysm, which was located at an end branch of the left sphenopalatine artery.

Asunto(s)

RESUMEN

The aim of this technical note is to present a minimally invasive approach to the maxilla for segmental Le Fort I osteotomy in surgically assisted rapid palatal expansion (SARPE). This approach reduces the nasolabial changes that occur with the traditional circumvestibular approach.

Asunto(s)

RESUMEN

INTRODUCTION: Maxillary transverse deficiency (MTD) is a common facial disharmony that may need surgical assisted rapid palatal expansion (SARPE). The aim of this study was to present our SARPE technique and to report about our experience. MATERIEL AND METHOD: Medical records of all class III patients who underwent SARPE in our department from 2010 to 2015 and for whom a follow-up of at least 1year was available, were included in a retrospective study. The technique consisted, after short orthodontic preparation allowing for divergence of the upper central incisors, in a complete Le Fort I osteotomy without down fracture, and medial sagittal submucosal separation of the hard palate under general anesthesia in an inpatient procedure. Teeth-supported distracters were sealed preoperatively while bone-supported devices were inserted peroperatively. Activation of the distracter was allowed from day 2 at the rate of 2×0.25 per day during 4days and 2×0.5mm per day the following days. Distracters were left in place for about 4months. Orthodontic treatment resumption was allowed from the second month. The initial malocclusion, the amount and type (parallel or angular) of distraction that was needed, the type of distracter used, the amount of distraction obtained, the per- and postoperative complications and the clinical stability of the end result were analyzed. RESULTS: The records of 23 patients (18 women, 5 men - average age: 25.4years, extremes: 16-55years) could be included. MTD was isolated in 6 cases, associated with a maxillary retrognathism in 5 cases, with a mandibular prognathism in 6 cases, and with both in 6 cases. The average amount of distraction needed was 7.2mm (range: 4-12), parallel in 20 cases and angular in 3 cases. The distracters were bone-supported (Rapid Palatal Expander®, KLS Martin Group, Tuttlingen, Germany) in 3 patients and custom-made tooth-supported in 20 patients. The average amount of distraction obtained at the level of the distracter cylinder was 7.7mm (range: 5-13). We noted 2 cases of palatal fibromucosa perforations, 1 case of posterior excess of distraction, 1 case of nasal septum deviation, 1 case of iatrogenic necrosis of tooth No.°11, 1 case of naso-genial sulcus hematoma, 1 case of intraoperative mobility of tooth No.°21, 5 cases of asymmetric distraction. Seventeen patients needed a second orthognathic procedure and 22 had stable Class I occlusion after removal of appliances at 18 months follow-up on average. DISCUSSION: SARPE is a quite safe procedure that allows for transverse coordination without dental extraction. Transverse discrepancies greater than 4mm are for us clear indications for SARPE. When a sagittal discrepancy is associated, we prefer performing SARPE first and correcting the sagittal plane in a second operation. The recent development of Le Fort I sliding osteosynthesis plates opens the way to one time correction and the development of double-action distracters fitted out with 2 cylinders will be helpful for performing angular distractions.

Asunto(s)

RESUMEN

We present the orthodontic treatment of a 20-year-old Chinese man with the moderate skeletal Class III malocclusion. The usages of the temporary anchorage devices and the surgically assisted rapid palatal expansion (SARPE) have provided a variety of options for the treatment of Class III malocclusion.

RESUMEN

The study objective was to compare the biomechanics of surgically assisted rapid palatal expansion (SARPE) with tooth-borne and bone-borne expanders. Materials include a sample of 54 cone-beam CT of 27 patients who underwent SARPE (bone-borne, n=21; tooth-borne, n=6) before treatment and at expander removal. Expansion efficacy was estimated by interapecal and intercoronal distances between maxillary canines, premolars and first molars as well as Coronal-Apical Index (CAI = coronal expansion (mm)/apical expansion (mm)). CAI varied between 1.5 and 2.0 in the group of patients with bone-borne appliances, and from 2.3 to 2.6 in the tooth-borne appliances group. The maximal amount of vestibular coronal declination was revealed in premolars by the use of tooth-borne appliances. Bone-borne appliances allowed lateralization of maxilla and the most prominent effect of tooth shift in a vestibular direction, which may be seen as the most important factors in a relapse prevention.

Asunto(s)