RESUMEN

Novel geometrically asymmetric biscinnamyl-sulfone compounds (6a-c) with donor-π-conjugated spacer-acceptor functionality were successfully synthesized. This was achieved by coupling cinnamaldehyde precursors with 3,3'-diaminodiphenyl sulfone in dry organic solvents, resulting in high yields. Several spectroscopic techniques were employed to identify the derivatives. The absorption spectra of these compounds exhibited broad bands that spanned up to 120 nm, which can be attributed to their extended conjugation systems. In order to explore the electronic transitions of these materials, Time-Dependent Density-Functional Theory (TD-DFT) with EIFPCM solvation mode was utilized. We computationally investigated the static nonlinear optical (NLO) parameters, including dipole moments (µ), polarizability (α), anisotropic polarizability (Δα), first-order hyperpolarization (ß), and second-order hyperpolarization (γ). Although the new structures possess different functional groups, they displayed similar electronic potentials when their molecular electrostatic potentials were plotted. These potentials are crucial in stabilizing the molecules in crystal systems through noncovalent forces such as C-H⋯π stacking and hydrogen bonding. They also provide insights into the electronic assessments and energetics of these individual forces. By estimating the frontier orbitals, we gained an understanding of the intramolecular charge transfer in the compounds. Energy gap values were determined using the orbitals of density of states method and experimentally via the Tauc method. The computational and experimental results were in good agreement. Lastly, we examined the influence of different protic and aprotic solvents on the absorption bands of compound 6b, as an example. This compound showed a significant bathochromic shift of 41 nm upon changing the solvent from acetic acid to dimethyl sulfoxide.

RESUMEN

The widespread production and use of multi-fluorinated carbon-based substances for a variety of purposes has contributed to the contamination of the global water supply in recent decades. Conventional wastewater treatment can reduce contaminants to acceptable levels, but the concentrated retentate stream is still a burden to the environment. A selective anion-exchange membrane capable of capture and controlled release could further concentrate necessary contaminants, making their eventual degradation or long-term storage easier. To this end, commercial microfiltration membranes were modified using pore functionalization to incorporate an anion-exchange moiety within the membrane matrix. This functionalization was performed with primary and quaternary amine-containing polymer networks ranging from weak to strong basic residues. Membrane loading ranged from 0.22 to 0.85 mmol/g membrane and 0.97 to 3.4 mmol/g membrane for quaternary and primary functionalization, respectively. Modified membranes exhibited a range of water permeances within approximately 45-131 LMH/bar. The removal of PFASs from aqueous streams was analyzed for both "long-chain" and "short-chain" analytes, perfluorooctanoic acid and perfluorobutyric acid, respectively. Synthesized membranes demonstrated as high as 90% rejection of perfluorooctanoic acid and 50-80% rejection of perfluorobutyric acid after 30% permeate recovery. Regenerated membranes maintained the capture performance for three cycles of continuous operation. The efficiency of capture and reuse can be improved through the consideration of charge density, water flux, and influent contaminant concentration. This process is not limited by the substrate and, thus, is able to be implemented on other platforms. This research advances a versatile membrane platform for environmentally relevant applications that seek to help increase the global availability of safe drinking water.

RESUMEN

Here, we report a robust nickel-catalyzed α,ß-dehydrogenation process designed for substrates that contain electron-withdrawing sulfur and phosphorus groups. Leveraging the formation of organozinc intermediates and the utilization of a mild oxidant, allyl methyl carbonate, this methodology exhibits remarkable efficiency and outstanding diastereoselectivities across a diverse array of substrates, achieving E:Z ratios exceeding 20:1. Investigation through deuterium incorporation studies and an analysis of the reaction sequence leading to the formation of the dehydrogenative allylation side product, provide useful insights into reaction optimization.

RESUMEN

Chikungunya virus (CHIKV) is responsible for the most endemic alphavirus infections called Chikungunya. The endemicity of Chikungunya has increased over the past two decades, and it is a pathogen with pandemic potential. There is currently no approved direct-acting antiviral to treat the disease. As part of our antiviral drug discovery program focused on alphaviruses and the non-structural protein 2 protease, we discovered that J12 and J13 can inhibit CHIKV nsP2 protease and block the replication of CHIKV in cell cultures. Both compounds are metabolically stable to human liver microsomal and S9 enzymes. J13 has excellent oral bioavailability in pharmacokinetics studies in mice and ameliorated Chikungunya symptoms in preliminary efficacy studies in mice. J13 exhibited an excellent safety profile in in vitro safety pharmacology and off-target screening assays, making J13 and its analogs good candidates for drug development against Chikungunya.

Asunto(s)

RESUMEN

Microplastics (MPs), which are defined as plastics with a size of less than 5 mm, cannot be treated completely in wastewater treatment plants (WWTPs) and discharged to a water body because they are too small in size. It has been reported that MPs can have adverse effects on human beings and water ecosystems. There is a need to combine existing drinking water treatment plants (DWTPs) and WWTPs with the traditional treatment process and technology with high removal efficiency of MPs or to develop a new technology to separate MPs from water and wastewater. In this study, the effects of MPs (polyethylene (PE), 125 µm) and organic matter (humic acid) were researched in a hybrid treatment process of ceramic microfiltration (MF) and photocatalyst (TiO2)-mounted polyether sulfone (PES) spheres with air backwashing. The roles of the MF, photooxidation, and adsorption of PES spheres were confirmed in a single MF process (MF), an MF process with UV irradiation (MF+UV), MF and PES sphere adsorption without UV irradiation (MF+PES), and a hybrid process incorporating MF and PES spheres with UV irradiation (MF+PES+UV). The impact of the air backwashing cycle (filtration time, FT) on filtration characteristics and treatment efficiencies in the hybrid process was studied. In the MF process, membrane fouling increased with increasing organic matter (HA, humic acid). The treatment efficiency of MPs increased; however, that of dissolved organic matter (DOM) decreased with increasing HA. As MPs increased, the membrane fouling decreased; however, total filtration volume (VT) remained almost constant. The treatment efficiency of MPs increased a little, and that of DOM showed a dropping trend. In the hybrid process, the membrane fouling was controlled via the adsorption and UV photooxidation of the PES spheres, and the DOM treatment efficiency increased by combining processes from MF to MF+PES+UV. The optimal FT was 10 min at BT 10 s in this hybrid process. The results could be applied to separate MPs effectively in DWTPs/WWTPs.

RESUMEN

Objective: To design and prepare a high efficiency bilirubin adsorbent with good mechanical properties and biocompatibility. Methods: In this study, quaternary ammonium pyridine was designed and synthesized, and then modified polyether sulfone microspheres, or PES/p(4-VP-co-N-VP)@6 microspheres, were prepared by phase conversion and electrostatic spraying. The morphology of the polymer components and the microspheres were studied by means of nuclear magnetic resonance (NMR) spectroscopy and scanning electron microscopy. The basic properties of the microspheres and their bilirubin adsorption efficiency were tested, and the adsorption mechanism was further explored. Blood cell counts and the clotting time of the microspheres were also measured. Results: The diameter of the modified polyether sulfone microspheres prepared in the study was approximately 700-800 µm. Compared with the original PES microspheres, the surface and internal structure of PES/p(4-VP-co-N-VP)@6 microspheres did not change significantly, and they also had a loose porous structure, with some micropores scattered around in addition to irregular large pores. Compared with the control group, the bilirubin removal effect of the modified microspheres was (94.91±0.73)% after static adsorption in bilirubin PBS buffer solution for 180 min, with the difference being statistically significant (P<0.0001). According to the findings for the clotting time, the activated partial thromboplastin time (APTT) of the blank plasma group, the control PES group, and the modified PES microsphere group were (27.57±1.25) s, (28.47±0.45) s, and (30.4±0.872) s, respectively, and the difference between the experimental group and the other two groups was statistically significant (P<0.01, P<0.05). There was no significant change in red blood cell and white blood cell counts. Conclusion: The microspheres prepared in the study have high efficiency in bilirubin adsorption, excellent mechanical properties and thermal stability, and good blood biocompatibility, and are expected to be used in the clinical treatment of patients with liver failure.

Asunto(s)

RESUMEN

Polycyclic heteroaromatics (PHAs) are a highly versatile class of functional materials, especially applicable as efficient luminophores in organic light-emitting diodes (OLEDs). Those constructed by tethered phenyl surrounding the main group center attract extensive attention due to their excellent OLED device performance. However, the development of such a class of emitters is often limited to boron, nitrogen-doped π-conjugated heterocycles. Herein, we proposed a novel kind of blue emitter by constructing a donor-acceptor molecular configuration, utilizing a dual sulfone-bridged triphenylamine (BTPO) core and mono/di-diphenylamine (DPA) substituents. The twisted D-A molecular structures and appropriate donor strength facilitate the effective separation of natural transition orbitals, endowing the emitters with charge-transfer dominant hybridized local and charge-transfer characteristics for the excited states. Both BTPO-DPA and BTPO-2DPA own small S1-T1 splitting energy, thus demonstrating blue thermally activated delayed fluorescence. The more symmetrical structure and enhanced CT features brought by additional DPA moiety confer BTPO-2DPA with a shorter delayed fluorescence lifetime, a higher fluorescence quantum yield and narrower emission. Therefore, BTPO-2DPA based OLED devices exhibit superior blue electroluminescence performance, with external quantum efficiencies reaching 12.31%.

RESUMEN

In the brewing process, methionine is a decisive amino acid for (off-)flavor formation. A significant part of methionine is oxidized to methionine sulfoxide (MetSO) in malt. We hypothesized that MetSO and MetSO2 are metabolized to volatile compounds during yeast fermentation and examined whether the yeast Saccharomyces cerevisiae is able to catabolize l-MetSO and l-MetSO2 in free and dipeptide-bound forms. We also investigated the stability of l-methionine sulfoximine and S-methylmethionine. Cell viability in the presence of the test compounds was at least 90%. Both free and peptide-bound test substances were metabolized by Saccharomyces cerevisiae. l-MetSO was degraded most rapidly as the free amino acid, while l-MetSO2 was degraded most rapidly bound in dipeptides. We observed a different degradation behavior of the (R) and (S) diastereoisomers for l-MetSO and l-methionine sulfoximine. Furthermore, we detected methionol as the only metabolite of MetSO. Methionol sulfoxide was not formed. MetSO2 was not converted to methionol or methionol sulfone but to the respective α-hydroxy acid. We conclude that the reduction of MetSO to methionine proceeds faster than transamination. The occurrence of MetSO or MetSO2 in brewing malt will not lead to the formation of hitherto unknown volatile metabolites of the Ehrlich pathway.

Asunto(s)

RESUMEN

Due to the specificity, high efficiency, and gentleness of enzyme catalysis, the industrial utilization of enzymes has attracted more and more attention. Immobilized enzymes can be recovered/recycled easily compared to their free forms. The primary benefit of immobilization is protection of the enzymes from harsh environmental conditions (e.g., elevated temperatures, extreme pH values, etc.). In this paper, catalase was successfully immobilized in a poly(aryl ether sulfone) carrier (PAES-C) with tunable pore structure as well as carboxylic acid side chains. Moreover, immobilization factors like temperature, time, and free-enzyme dosage were optimized to maximize the value of the carrier and enzyme. Compared with free enzyme, the immobilized-enzyme exhibited higher enzymatic activity (188.75 U g-1, at 30 °C and pH 7) and better thermal stability (at 60 °C). The adsorption capacity of enzyme protein per unit mass carrier was 4.685 mg. Hydrogen peroxide decomposition carried out in a continuous-flow reactor was selected as a model reaction to investigate the performance of immobilized catalase. Immobilized-enzymes showed a higher conversion rate (90% at 8 mL/min, 1 h and 0.2 g) compared to intermittent operation. In addition, PAES-C has been synthesized using dichlorodiphenyl sulfone and the renewable resource bisphenolic acid, which meets the requirements of green chemistry. These results suggest that PAES-C as a carrier for immobilized catalase could improve the catalytic activity and stability of catalase, simplify the separation of enzymes, and exhibit good stability and reusability.

RESUMEN

Clavulanic acid is a medicinally important inhibitor of serine ß-lactamases (SBLs). We report studies on the mechanisms by which clavulanic acid inhibits representative Ambler class A (TEM-116), C (Escherichia coli AmpC), and D (OXA-10) SBLs using denaturing and non-denaturing mass spectrometry (MS). Similarly to observations with penam sulfones, most of the results support a mechanism involving acyl enzyme complex formation, followed by oxazolidine ring opening without efficient subsequent scaffold fragmentation (at pH 7.5). This observation contrasts with previous MS studies, which identified clavulanic acid scaffold fragmented species as the predominant SBL bound products. In all the SBLs studied here, fragmentation was promoted by acidic conditions, which are commonly used in LC­MS analyses. Slow fragmentation was, however, observed under neutral conditions with TEM-116 on prolonged reaction with clavulanic acid. Although our results imply clavulanic acid scaffold fragmentation is likely not crucial for SBL inhibition in vivo, development of inhibitors that fragment to give stable covalent complexes is of interest.

RESUMEN

An efficient cross-coupling of aryl bromides with sodium sulfinates, using an organoboron photocatalyst with nickel, is described herein. Under the irradiation of white light, this dually catalytic system enables the synthesis of a series of sulfone compounds in moderate to good yields. A broad range of functional groups and heteroaromatic compounds is tolerated under these reaction conditions. The use of an organoboron photocatalyst highlights a sustainable alternative to iridium or ruthenium complexes. These findings contribute to the field of photochemistry and provide a greener approach to sulfone synthesis.

RESUMEN

Optimized syntheses of (E)-5-(2-ethoxyphenyl)-N-(3-(methylsulfonyl)allyl)-1H-pyrazole-3-carboxamide (RA-0002034, 1), a promising antiviral covalent cysteine protease inhibitor lead, were developed. The syntheses avoid the contamination of 1 with the inactive cyclic dihydropyrazolo[1,5-a]pyrazin-4(5H)-one 2, which is formed by the intramolecular aza-Michael reaction of the vinyl sulfone warhead under basic conditions and slowly at pH 7.4 in phosphate buffer. The pure cysteine protease inhibitor 1 could be synthesized using either modified amide coupling conditions or through the introduction of a MOM-protecting group and was stable as a TFA or HCl salt. Although acyclic 1 demonstrated poor pharmacokinetics with high in vivo clearance in mice, inactive cyclic 2 showed improved plasma exposure. The potential use of cyclic dihydropyrazolo[1,5-a]pyrazin-4(5H)-ones as prodrugs for the acyclic ß-amidomethyl vinyl sulfone warhead was demonstrated by GSH capture experiments with an analog of 2.

RESUMEN

Metabolic dysfunction-associated fatty liver disease (MAFLD) presents a significant global health challenge, characterized by the accumulation of liver fat and impacting a considerable portion of the worldwide population. Despite its widespread occurrence, effective treatments for MAFLD are limited. The liver-specific isoform of pyruvate kinase (PKL) has been identified as a promising target for developing MAFLD therapies. Urolithin C, an allosteric inhibitor of PKL, has shown potential in preliminary studies. Expanding upon this groundwork, our study delved into delineating the structure-activity relationship of urolithin C via the synthesis of sulfone-based urolithin analogs. Our results highlight that incorporating a sulfone moiety leads to substantial PKL inhibition, with additional catechol moieties further enhancing this effect. Despite modest improvements in liver cell lines, there was a significant increase in inhibition observed in HepG2 cell lysates. Specifically, compounds 15d, 9d, 15e, 18a, 12d, and 15a displayed promising IC50 values ranging from 4.3 µM to 18.7 µM. Notably, compound 15e not only demonstrated a decrease in PKL activity and triacylglycerol (TAG) content but also showed efficient cellular uptake. These findings position compound 15e as a promising candidate for pharmacological MAFLD treatment, warranting further research and studies.

Asunto(s)

RESUMEN

Sulfur(VI)-based functional groups are popular scaffolds in a wide variety of research fields including synthetic and medicinal chemistry, as well as chemical biology. The growing interest in sulfur(VI)-containing molecules has motivated the scientific community to explore new methods to synthesize and modify them. Here, photocatalysis plays a key role granting access to new types of reactivity under mild reaction conditions. In this Perspective, we present a selection of works reported in the last six years focused on the photocatalytic assembly and reactivity of sulfones, sulfonamides, and sulfoximines. We addressed the key synthetic intermediates for each transformation, while discussing limitations and strength points of the protocols. Future directions of the field are finally presented.

RESUMEN

The transition metal-catalyzed multi-component cross-electrophile sulfonylation, which incorporates SO2 as a linker within organic frameworks, has proven to be a powerful, efficient, and cost-effective means of synthesizing challenging alkyl-alkyl sulfones. Transition metal catalysts play a crucial role in this method by transferring electrons from reductants to electrophilic organohalides, thereby causing undesirable side reactions such as homocoupling, protodehalogenation, ß-hydride elimination, etc. It is worth noting that tertiary alkyl halides have rarely been demonstrated to be compatible with current methods owing to various undesired side reactions. In this work, a zinc-promoted cross-electrophile sulfonylation is developed through a radical-polar crossover pathway. This approach enables the synthesis of various alkyl-alkyl sulfones, including 1°-1°, 2°-1°, 3°-1°, 2°-2°, and 3°-2° types, from inexpensive and readily available alkyl halides. Various functional groups are well tolerated in the work, resulting in yields of up to 93%. Additionally, this protocol has been successfully applied to intramolecular sulfonylation and homo-sulfonylation reactions. The insights gained from this work shall be useful for the further development of cross-electrophile sulfonylation to access alkyl-alkyl sulfones.

RESUMEN

Deep eutectic electrolytes (DEEs) have attracted significant interest due to the unique physiochemical properties, yet challenges persist in achieving satisfactory Li anode compatibility through a binary DEE formula. In this study, we introduce a nonflammable binary DEE electrolyte comprising of lithium bis(trifluoro-methane-sulfonyl)imide (LiTFSI) and solid butadiene sulfone (BdS), which demonstrates enhanced Li metal compatibility while exhibiting high Li+ ion migration number (0.52), ionic conductivity (1.48 mS·cm-1), wide electrochemical window (~4.5 V vs. Li/Li+) at room temperature. Experimental and theoretical results indicate that the Li compatibility derives from the formation of a LiF-rich SEI, attributed to the undesirable adsorption and deformation of BdS on Li surface that facilitates the preferential reactions between LiTFSI and Li metal. This stable SEI effectively suppresses dendrites growth and gas evolution reactions, ensuring a long lifespan and high coulombic efficiency in both the Li||Li symmetric cells, Li||LiCoO2 and Li||LiNi0.8Co0.1Mn0.1O2 full cells. Moreover, the BdS eutectic strategy exhibit universal applicability to other metal such as Na and Zn by pairing with the corresponding TFSI-based salts.

RESUMEN

Benzalkonium chlorides (BACs) have been of environmental concern due to their widespread use and potential harm. However, challenges arise in defining and controlling the exposure concentration (Cw) in aquatic toxicity tests involving BACs with a long alkyl chain (i.e., #C > 14). To address this, a novel passive dosing method was introduced in the 48 h-acute ecotoxicity test on Daphnia magna and compared to the conventional solvent-spiking method in terms of Cw stability and toxicity results. Among 13 sorbent materials tested for their sorption capacity, poly(ether sulfone) (PES) membrane was an optimal passive dosing reservoir, with equilibrium desorption of BACs to water achieved within 24 h. The Cw of BACs remained constant in both applied dosing methods during the test period. However, the Cw in solvent-spiking tests was lower than the nominal concentration for long-chain BACs, particularly at low exposure concentrations. Notably, the solvent-spiking tests indicated that the toxicity of BACs increased with alkyl chain length from C6 to 14, followed by a decline in toxicity from C14 to 18. In contrast, the passive dosing method displayed similar or slightly increasing toxicity levels of BACs from C14 to C18, indicating higher toxicity of C16 and C18-BACs than that inferred by the solvent spiking test. These findings emphasize the potential of applying this innovative passive dosing approach in aquatic toxicity tests to generate reliable and accurate toxicity data and support a comprehensive risk assessment of cationic surfactants.

Asunto(s)

RESUMEN

A new polyether sulfone (PES) membrane modified with manganese-aluminum layered double hydroxide (Mn-Al LDH) was prepared and utilized in the membrane micro-solid phase extraction (M-µSPE) of acrylamide for the first time. The analyses were conducted using HPLC-UV. The extraction efficiency of the PES membrane was enhanced two-fold with the addition of LDH. The fabricated LDH@PES was characterized using ATR-FTIR, SEM, XRD, and nitrogen adsorption/desorption isotherms. The specific surface area, average pore diameter, thickness, cross-sectional channels, and LDH particle size of the LDH@PES membrane were determined. The extraction key factors including membrane composition, desorption conditions, sample pH, and salt concentration were studied. The method was validated by determining the limit of detection, the limit of quantification, linear range, r2, matrix effect, enrichment factor, and precision. Extraction recoveries ranged from 87.4 to 103.5% with RSD < 5.9%. Finally, the method's green features were assessed with the AGREE protocol. This is the first report on the application of LDH@PES for microfiltration/extraction of acrylamide in various chocolate and cocoa products.

RESUMEN

In this paper, we successfully synthesize phosphoric acid functionalized graphene oxide (PGO) based on acid modification of graphene oxide. The composite membrane is further prepared by adding PGO into sulfonated poly(aryl ether ketone sulfone) containing carboxyl groups matrix (C-SPAEKS). The PGO as well as the composite membranes were characterized by a series of tests. The prepared composite proton exchange membranes (PEMs) have good mechanical and electrochemical properties. Compared to the C-SPAEKS membrane, the best composite membrane has a tensile strength of 40.7 MPa while exhibiting superior proton conductivity (110.17 mS cm-1 at 80 °C). In addition, the open-circuit voltage and power density of C-SPAEKS@1% PGO are 0.918 V and 792.17 mW cm-2, respectively. Compared with C-SPAEKS (0.867 V and 166 mW cm-2), it can be seen that our work has a certain effect on the improvement of the single cell performance. The above results demonstrate that the functionalized graphene oxide has greatly improved the electrochemical performance and even the overall performance of PEMs.

RESUMEN

4-[(5-[2-Methyl-5-(methylsulfonyl)pentan-2-yl]sulfonylpyrimidin-4-yl)amino]benzonitrile 2 was identified as a novel potent aldosterone synthase inhibitor. Compound 2 was found to inhibit human CYP11B2 in the nanomolar range, and showed an aldosterone-lowering effect in a furosemide-treated cynomolgus monkey model. Although human CYP11B2 has the high homology sequence with human CYP11B1, compound 2 showed more than 80 times higher selectivity over human CYP11B1 in vitro.

Asunto(s)