RESUMEN

Cu/ZrO2 is a promising catalyst for the hydrogenation of CO2 to methanol. Reaction pathways involving formates or hydroxycarbonyls have been proposed. We show here that three different types of formates can be observed under reaction conditions at 220 °C and 3 bar, one being located on metallic Cu and two others being bound to ZrO2 . The surface concentrations of formates were determined through calibration curves and their reactivity measured during chemical transient experiments. The Cu-bound formate represented only about 7 % of surface formates, but exhibited a higher reactivity and was found to be the only formate that could account for all the production of methanol. Copper is thus not there only to activate H2 , but also bears other crucial intermediates. This work reemphasizes that fully quantitative IR analyses and transient methods are required to unravel the role of surface species.

RESUMEN

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co3 O4 , MgCo2 O4 , Co2 FeO4 , Co2 AlO4 and CoFe2 O4 . The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H2 O2 decomposition. Studying the effect of dominant surface termination, isotropic Co3 O4 and CoFe2 O4 catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co3+ plays the major role for high activity. In H2 O2 decomposition, Co2+ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.

RESUMEN

Copper-catalyzed and organocopper-involved reactions are of great significance in organic synthesis. To have a deep understanding of the reaction mechanisms, the structural characterizations of organocopper intermediates become indispensable. Meanwhile, the structure-function relationship of organocopper compounds could advance the rational design and development of new Cu-based reactions and organocopper reagents. Compared to the mono-carbonic ligand, the C,N- and C,C-bidentate ligands better stabilize unstable organocopper compounds. Bidentate ligands can chelate to the same copper atom via η2-mode, forming a mono-cupra-cyclic compounds with at least one acute C-Cu-C angle. When the bidentate ligands bind to two copper atoms via η1-mode at each coordinating site, the bimetallic macrocyclic compounds will form nearly linear C-Cu-C angles. The anionic coordinating sites of the bidentate ligand can also bridge two metals via µ2-mode, forming organocopper aggregates with Cu-Cu interactions and organocuprates with contact ion pair structures. The reaction chemistry of some selected organocopper compounds is highlighted, showing their unique structure-reactivity relationships.

RESUMEN

Pt-based materials are widely used as heterogeneous catalysts, in particular for pollutant removal applications. The state of Pt has often been proposed to differ depending on experimental conditions, for example, metallic Pt poisoned with CO being present at lower temperature before light-off, while an oxidized Pt surface prevails above light-off temperature. In stark contrast to all previous reports, we show herein that both metallic and oxidized Pt are present in similar proportions under reaction conditions at the surface of ca. 1 nm nanoparticles showing high activity at 30 °C. The simultaneous presence of metallic and oxidized Pt enables a synergy between these phases. The main role of the metallic Pt phase is to provide strong adsorption sites for CO, while that of oxidized Pt supposedly supplies reactive oxygen. Our results emphasize the complex dual oxidic-metallic nature of supported Pt catalysts and platinum's evolving nature under reaction conditions.

RESUMEN

s-Block metal carbenoids are carbene synthons and applied in a myriad of organic transformations. They exhibit a strong structure-activity relationship, but this is only poorly understood due to the challenging high reactivity and sensitivity of these reagents. Here, we report on systematic VT and DOSY NMR studies, XRD analyses as well as DFT calculations on a sulfoximinoyl-substituted model system to explain the pronounced solvent dependency of the carbenoid stability. While the sodium and potassium chloride carbenoids showed high stabilities independent of the solvent, the lithium carbenoid was stable at room temperature in THF but decomposed at -10 °C in toluene. These divergent stabilities could be explained by the different structures formed in solution. In contrast to simple organolithium reagents, the monomeric THF-solvate was found to be more stable than the dimer in toluene, since the latter more readily forms direct Li/Cl interactions which facilitate decomposition via α-elimination.

RESUMEN

Benz(o)hydrazide (BH) is the basic aryl hydrazide; aryl hydrazides have been pursued in the course of drug discovery. Oxidations of BH and phenylacetic hydrazide (PAH) by hexachloroiridate(IV) ([IrCl6]2-) were investigated by use of stopped-flow spectral, rapid spectral scan, RP-HPLC and NMR spectroscopic techniques. The oxidation reactions followed well-defined second-order kinetics and the observed second-order rate constant k' versus pH profiles were established over a wide pH range. Product analysis revealed that BH and PAH were cleanly oxidized to benzoic acid and phenylacetic acid, respectively. A reaction mechanism was proposed, resembling those suggested previously for the oxidations of isoniazid (INH) and nicotinic hydrazide (NH) by [IrCl6]2-. Rate constants of the rate-determining steps were evaluated, confirming a huge reactivity span of the protolysis species observed previously. The enolate species of BH is extremely reactive towards reduction of [IrCl6]2-. The determined middle-ranged negative values of activation entropies together with rapid scan spectra manifest that an outer-sphere electron transfer is probably taking place in the rate-determining steps. The reactivity of neutral species of hydrazides is clearly not correlated to the corresponding pKa values of the hydrazides. On the other hand, a linear correlation, logkenolate = (0.16 ± 0.07)pKenol + (6.1 ± 0.8), is found for the aryl hydrazides studied so far. The big intercept and the small slope of this correlation may pave a way for a rational design of new antioxidants based on aryl hydrazides. The present work also provides the pKa values for BH and PAH at 25.0 °C and 1.0 M ionic strength which were not reported before.

Asunto(s)

Hidrazinas/química , Iridio/química , Fenilacetatos/química , Ácido Benzoico/química , Concentración de Iones de Hidrógeno , Cinética , Oxidación-Reducción , Soluciones , Relación Estructura-Actividad

RESUMEN

Oxidation of monoclonal antibodies (mAbs) can impact their efficacy and may therefore represent critical quality attributes (CQA) that require evaluation. To complement classical CQA, bevacizumab and infliximab were subjected to oxidative stress by H2O2 for 24, 48, or 72 h to probe their oxidation susceptibility. For investigation, a middle-up approach was used utilizing liquid chromatography hyphenated with mass spectrometry (LC-QTOF-MS). In both mAbs, the Fc/2 subunit was completely oxidized. Additional oxidations were found in the light chain (LC) and in the Fd' subunit of infliximab, but not in bevacizumab. By direct comparison of methionine positions, the oxidized residues in infliximab were assigned to M55 in LC and M18 in Fd'. The forced oxidation approach was further exploited for comparison of respective biosimilar products. Both for bevacizumab and infliximab, comparison of posttranslational modification profiles demonstrated high similarity of the unstressed reference product (RP) and the biosimilar (BS). However, for bevacizumab, comparison after forced oxidation revealed a higher susceptibility of the BS compared to the RP. It may thus be considered a useful tool for biopharmaceutical engineering, biosimilarity assessment, as well as for quality control of protein drugs.

RESUMEN

Nucleophilicity parameters (N, sN ) of a group of representative diazaphospholenium hydrides were derived by kinetic investigations of their hydride transfer to a series of reference electrophiles with known electrophilicity (E) values, using the Mayr equation log k2 =sN (N+E). The N scale covers over ten N units, ranging from the most reactive hydride donor (N=25.5) to the least of the scale (N=13.5). This discloses the highest N value ever quantified in terms of Mayr's nucleophilicity scales reported for neutral transition-metal-free hydride donors and implies an exceptional reactivity of this reagent. Even the least reactive hydride donor of this series is still a better hydride donor than those of many other nucleophiles such as the C-H, B-H, Si-H and transition-metal M-H hydride donors. Structure-reactivity analysis reveals that the outstanding hydricity of 2-H-1,3,2-diazaphospholene benefits from the unsaturated skeleton.

RESUMEN

A selection of NIR-optically responsive neuron probes was produced comprising of a donor julolidyl group connected to a BODIPY core and several different styryl and vinylpyridinyl derived acceptor moieties. The strength of the donor-acceptor interaction was systematically modulated by altering the electron withdrawing nature of the aryl unit. The fluorescence quantum yield was observed to decrease as the electron withdrawing effect of the aryl subunit increased in line with changes of the Hammett parameter. The effectiveness of these fluorophores as optically responsive dyes for neuronal imaging was assessed by measuring the toxicity and signal-to-noise ratio (SNR) of each dye. A great improvement of SNR was obtained when compared to the first-generation BODIPY-based voltage sensitive dyes with concomitant toxicity decrease. The mechanism for the optical response is disparate from conventional cyanine-based dyes, opening up a new way to produce effective voltage sensitive dyes that respond well into the NIR region.

Asunto(s)

Compuestos de Boro/química , Colorantes Fluorescentes/química , Neuronas/metabolismo , Animales , Braquiuros/metabolismo , Carbocianinas/química , Cristalografía por Rayos X , Colorantes Fluorescentes/síntesis química , Colorantes Fluorescentes/metabolismo , Microscopía Fluorescente , Conformación Molecular , Teoría Cuántica , Relación Señal-Ruido , Espectrofotometría Infrarroja , Espectrofotometría Ultravioleta

RESUMEN

An overview on the structural arrangements adopted by Chiral Lithium Amides (CLAs), alone or in mixed complexes, is presented. These species are important reagents for asymmetric synthesis and understanding their organization is essential to improve their design and the reaction conditions.