RESUMEN
High levels of manganese (Mn) and other heavy metals from electrolytic manganese residue (EMR) stockpiled would be released into the environment under natural conditions. A batch-leaching test was carried out to investigate the release characteristics of heavy metals from EMR with different storage times under simulated environmental conditions such as acid rain with different pH (3.0, 4.5, 5.6, and 7.0) at contact times of 1, 2, 4, 6, and 12 h; liquid to solid ratio (L/S) (5:1, 10:1, 20:1, and 30:1); and temperature (15, 25, 35, and 45 °C). The results showed that low pH (3.0 and 4.5) and high temperature (35 and 45 °C) could significantly promote heavy metal leaching from EMRs and increasing the L/S ratio above 20:1 mL/g significantly decreased heavy metal leachate concentrations due to dilution effect. Cr, Mn, and Pb concentrations in leachate increased almost continuously throughout the leaching process, while Zn decreased slightly at the 12th hour. Meanwhile, heavy metal concentrations in EMR1 (fresh EMR) were higher than in EMR2 (out stockpiled for more than 3 months). The concentrations of Mn, Pb, and Zn in leachates from EMRs at pH 3.0 and 4.5 leaching far exceeded the allowable maximum discharge concentrations for pollutants of the integrated wastewater discharge standard in China (GB8978-1996) by 57.5-59.0, 1.3-4.3, and 1.1-1.8 and 53.5-56.0, 3.04-7.25, and 1.0-1.91 times, respectively. Additionally, the Mn concentrations from both EMR leachates at pH 7.0 were above the national safe emission threshold. The morphological structure of EMRs changed after leaching, and XRD analysis showed the disappearance of MnO2, SiO2, FeS2, and CaSO4. The XPS revealed that Cr, Mn, Pb, and Zn existed as Cr3+, MnO, PbSO4, and ZnSiO3, respectively, after leaching. The study concluded that Mn, Pb, and Zn from EMRS leached by acid rain might pose a high potential environmental risk. Therefore, developing appropriate disposal techniques for EMR is necessary to prevent heavy metal pollution.
Asunto(s)
Lluvia Ácida , Metales Pesados , Manganeso/análisis , Lluvia Ácida/análisis , Compuestos de Manganeso/análisis , Plomo/análisis , Dióxido de Silicio/análisis , Monitoreo del Ambiente/métodos , Óxidos/análisis , Metales Pesados/análisisRESUMEN
Platelet function assays and global haemostasis assays are essential in diagnosing bleeding tendencies, with light transmission aggregometry (LTA) as golden standard. The Multiple Electrode Aggregation (Multiplate), platelet function assay (PFA) and rotational thromboelastometry (ROTEM) are mostly used as whole-blood screening tests. Currently, patients have to travel to specialized laboratories to undergo these tests, since specific expertise is required. Pre-analytical variables, like storage time and temperature during transport, are still considered to be the most vulnerable part of the process and may lead to discrepancies in the test results. We aim to give a first impression on the stability of blood samples from healthy volunteers during storage and investigate the effect of storage time (1, 3, 6 and 24 hours) and temperature (4°C, room temperature and 37°C) on the Multiplate, PFA, ROTEM and LTA test results. Our data indicated that, for the PFA, whole blood can be stored for 3 hours at room temperature. Whole blood used for the Multiplate and ROTEM can be stored for 6 hours of storage. For LTA, PRP and whole blood were stable up to 3 hours at 4°C or room temperature and 6 hours at room temperature, respectively.
Asunto(s)
Bioensayo/métodos , Hemostasis/fisiología , Almacenamiento y Recuperación de la Información/métodos , Pruebas de Función Plaquetaria/métodos , Adulto , Femenino , Humanos , Masculino , Temperatura , Adulto JovenRESUMEN
BACKGROUND: Several routine coagulation tests have been developed to give insight in the coagulation pathway. The laboratory diagnostical process consists of 3 phases, the pre-analytical, analytical and post-analytical phase; however, the pre-analytical phase is most sensitive to errors. The amount of time blood is stored, can affect the measurements of these coagulation tests and result in an incorrect conclusion. Therefore, we performed experiments to determine the maximal storage time, centrifuged blood samples can be reliably measured. METHODS: Citrated whole blood from hospital patients, who were tested for routine coagulation, was collected in 2.7 mL citrate tubes. These whole blood samples were centrifuged and the plasma was stored on top of the cell pellet at room temperature. After 2 h, 4 h, 6 h, 12 h and 24 h, the prothrombin time (PT), international normalized ratio (INR), activated partial thromboplastin time (aPTT), fibrinogen concentration, antithrombin activity, D-dimer concentration and thrombin time were measured using Sysmex CS2100 coagulation analysers. RESULTS AND CONCLUSION: Analytical evaluation of routine coagulation tests resulted in various significant differences and large variations between the various time intervals. Our results indicated that the PT and INR can be measured up till 24 h of storage. Centrifuged blood for measuring the fibrinogen concentration, antithrombin activity, D-dimer concentration and thrombin time can be stored up to 4 h, while 2 h of storage might already be too long for obtaining reliable aPTT measurements.