RESUMEN

In high molecular weight poly(L-lactic acid)/poly(D-lactic acid) (HMW PLLA/PDLA) blends, the construction of exclusive stereocomplex crystals (SC) with high crystallinity and strong melt memory remains a great challenge. In the present study, various norbornene dicarboxylate complexes (TMXNa, Mg, Al, or Ca) were employed as the stereo-selective nucleating agents (NAs), and their effect on the crystallization characteristics, rheological behavior, and heat resistance of PLLA/PDLA blends were thoroughly studied. Strikingly, TMX-Al facilitated the construction of exclusive SC with over 50 % crystallinity and excellent melt memory. The dense SC crystals network structure boosted the heat resistance of L/D-xAl blends with a VST as high as 145 °C. The strengthened intermolecular interaction fostered the generation of pre-ordered structure in the melt and enhanced chain interdiffusion, which contributed to intermolecular nucleation and SC crystallization in L/D-xAl blend. This study opens up a new avenue for melt processing and application development of SC-PLA materials.

Asunto(s)

RESUMEN

Flammability and poor toughness of unmodified PLA limit its applications in various fields. Though ammonium polyphosphate (APP) is a green and effective flame retardant, it has poor compatibility with the matrix, leading to a decrease in mechanical properties. Stereo-complexation greatly improves the strength and heat resistance of traditional PLA. However, the effect of flame retardants on the formation of stereo-complexed crystals and the impact of stereo-complexation on flame retardancy have not been studied previously. In this research, PDLA chains were first in-situ reacted with APP particles for improved interfacial compatibility. By utilizing the characteristic of PLA enantiomers that can form stereo-complexed crystals, near-complete stereo-complexed PLA fibers with flame retardancy were produced via clean and continuous melt spinning. The compatibility between PDLA-g-APP and PLLA matrix was studied by SEM, rheological analyses and DSC. Strength and flexibility of the fibers were simultaneously enhanced compared to traditional PLA due to the synergistic effect of interfacial compatibility and stereo-complexation. Compared to traditional PLA, the peak heat release rate and total heat release in microcalorimetry test were reduced by 33 % and 22 %, respectively. The flame-retardant fibers achieved a V-0 rating in the UL-94 test, and an increase in LOI value from 19.4 % to 28.2 %.

Asunto(s)

RESUMEN

Due to their high sensitivity to temperature and humidity, the applications of polylactic acid (PLA) products are limited. The stereo-complexation (SC) formed by poly(L-lactic acid) (PLLA) and its enantiomer poly(D-lactic acid) (PDLA) can effectively improve the heat resistance and hydrolysis resistance of PLA products. In this work, the blended melt-spinning process of PLLA/PDLA was carried out using a polyester fiber production line to obtain PLA fiber with a complete SC structure. The effects of high-temperature tension heat-setting on the crystalline structure, thermal properties, mechanical properties, and hydrolysis resistance were discussed. The results indicated that when the tension heat-setting temperature reached 190 °C, the fiber achieved an almost complete SC structure, and its melting point was 222.5 °C. An accelerated hydrolysis experiment in a 95 °C water bath proved that the SC crystallites had better hydrolysis resistance than homocrystallization (HC). The monofilament strength retention rate of SC-190 fiber reached as high as 78.5% after hydrolysis for 24 h, which was significantly improved compared with PLLA/PDLA drawn fiber.

Asunto(s)

RESUMEN

A novel strategy adaptive to 3D printing of stereo-complexed polylactide matrix for simultaneous toughness and stiffness was designed. Stereo-complexation is a potent way to enhance both aqueous stability and heat resistance of polylactide, but also aggravates brittleness problem of polylactide. Though poly(butyleneadipate-co-terephthalate) elastomer with epoxidized compatibilizer improved stiffness and toughness of common polylactide, their effectiveness on mechanical and crystallization properties of stereo-complexed polylactide remained unknown. More importantly, incorporation of above techniques into 3D printing kept a fundamental challenge. Both stereo-complexation of polylactide and covalent coupling of polylactide and poly(butyleneadipate-co-terephthalate) by epoxidized compatibilizer are easy to occur when preparing the filaments for printing, impeding the following 3D printing procedure. The hypothesis for this research is that controlled hierarchical crystallization and reaction in three thermal processes could ensure simultaneous toughness and stiffness, and complete stereo-complexation in polylactide matrices. Reinforcing effects of a selected epoxidized compatibilizer, POSS(epoxy)8, on crystallinities, thermal properties, mechanical properties and morphologies were systematically studied. Such a strategy not only removed the obstacles in incorporating stereo-complexation and coupling techniques of polylactide into 3D printing, but also revealed the mechanism to produce high-performance 3D printed polylactide matrix via hierarchical crystallization and reaction.

Asunto(s)

RESUMEN

Herein, a novel form of bicomponent nanofiber membrane containing stereo-complex polylactic acid (SC-PLA) was successfully produced by the side-by-side electrospinning of Poly (L-lactic acid) (PLLA) and Poly (D-lactic acid) (PDLA). We demonstrate that through these environmentally sustainable materials, highly efficient nanofiber assemblies for filtration can be constructed at very low basis weight. The physical and morphological structure, crystalline structure, hydrophobicity, porous structure, and filtration performance of the fibrous membranes were thoroughly characterized. It was shown that the fabricated polylactic acid (PLA) side-by-side fiber membrane had the advantages of excellent hydrophobicity, small average pore size, high porosity, high filtration efficiency, low pressure drop as well as superior air permeability. At the very low basis weight of 1.1 g/m2, the filtration efficiency and pressure drop of the prepared side-by-side membrane reached 96.2% and 30 Pa, respectively. Overall, this biomass-based, biodegradable filtration material has the potential to replace the fossil fuel-based polypropylene commercial meltblown materials for the design and development in filtration, separation, biomedical, personal protection and other fields.

RESUMEN

A novel strategy adaptive to 3D printing of PLA matrix for complete stereo-complexation was designed. Stereo-complexation has been demonstrated for its effectiveness in simultaneously improving aqueous stability and heat resistance of PLA. However, current techniques could not be directly incorporated into 3D printing of stereo-complexed PLA since stereo-complexed crystallites are easily formed before printing. High printing temperatures are thus required but decompose PLA materials at the same time. The hypothesis for this research is that controllable hierarchical crystallization in three thermal processes, the filament preparation, 3D printing and post annealing, could ensure feasibility of the strategy and a 100% stereo-complexation level in PLA matrices. Effects of extrusion, ambient and annealing temperatures on material structures were analyzed via WAXD, DSC and DMA. Resistance to hydrolysis and heat of the 3D printed PLA matrix was evaluated under practical conditions. It was showed that homo-crystallites anchored molecular chains of PLA during the post-annealing process for a high retention of tensile properties, while stereo-complexed crystallites provided stronger intermolecular interactions for improved hydrolytic and thermal resistance. This novel strategy via incorporating controlled hierarchical crystallization into 3D printing would enrich the fabrication and exploration of high-performance 3D printed PLA materials.

Asunto(s)

RESUMEN

Physical crosslinking and chemical crosslinking were used to further improve the mechanical properties and stability of the gel. A temperature/pH dual sensitive and double-crosslinked gel was prepared by the stereo-complex of HEMA-PLLA20 and HEMA-PDLA20 as a physical crosslinking agent, ethylene glycol dimethacrylate (EGDMA) as a chemical crosslinking agent, and azodiisobutyronitrile (AIBN) as an initiator for free radical polymerization. This paper focused on the performance comparison of chemical crosslinked gel, a physical crosslinked gel, and a dual crosslinked gel. The water absorption, temperature, and pH sensitivity of the three hydrogels were studied by a scanning electron microscope (SEM) and swelling performance research. We used a thermal analysis system (TGA) and dynamic viscoelastic spectrometer to study thermal properties and mechanical properties of these gels. Lastly, the in vitro drug release behavior of double-crosslinked hydrogel loaded with doxorubicin under different conditions was studied. The results show that the double-crosslinked and temperature/pH dual responsive hydrogels has great mechanical properties and good stability.