RESUMEN

BACKGROUND: Physical therapy is the preferred conservative treatment for patients with temporomandibular disorder (TMD). However, few studies have investigated the application of physical therapy in adolescents, especially follow-up studies on the long-term prognosis of these patients. This study investigated the short-term effects and long-term prognosis of physical therapy in adolescent patients with TMD and the factors influencing long-term symptoms. METHODS: Information regarding baseline data, specific treatment methods, treatment times and evaluation results was collected retrospectively for adolescent patients with TMD who received physical therapy. Patients were followed up via telephone and online questionnaires, and the influence of age, sex, disease course, mouth opening, pain intensity, oral parafunctional habits and treatment methods on long-term symptoms was analysed. RESULTS: Pain intensity, maximum mouth opening and the joint noise score improved significantly in 270/286 patients who received individualised comprehensive physical therapy. TMD-related symptoms improved with no noticeable impact on daily life in 187/199 patients who were followed up for an extended period (average, 30.71 ± 10.86 months) and were divided into asymptomatic or symptomatic groups according to the persistence of symptoms. Logistic regression analysis revealed that uncorrected oral parafunctional habits and fewer treatments were related to long-term symptoms. CONCLUSION: The long-term prognosis of adolescent patients with TMD after physical therapy was satisfactory. However, 52.8% of the patients experienced persistent TMD-related symptoms for an extended period, possibly due to insufficient treatment times and parafunctional habits. TRIAL REGISTRATION: ClinicalTrials.gov identifier: NCT05781607.

RESUMEN

We investigated the acute biophysical responses of changing the mandibular position during a rowing incremental protocol. A World-class 37-year-old male rower performed two 7 × 3 min ergometer rowing trials, once with no intraoral splint (control) and the other with a mandibular forward repositioning splint (splint condition). Ventilatory, kinematics and body electromyography were evaluated and compared between trials (paired samples t-test, p ≤ 0.05). Under the splint condition, oxygen uptake was lower, particularly at higher exercise intensities (67.3 ± 2.3 vs. 70.9 ± 1.5 mL·kg-1·min-1), and ventilation increased during specific rowing protocol steps (1st-4th and 6th). Wearing the splint condition led to changes in rowing technique, including a slower rowing frequency ([18-30] vs. [19-32] cycles·min-1) and a longer propulsive movement ([1.58-1.52] vs. [1.56-1.50] m) than the control condition. The splint condition also had a faster propulsive phase and a prolonged recovery period than the control condition. The splint reduced peak and mean upper body muscle activation, contrasting with an increase in lower body muscle activity, and generated an energetic benefit by reducing exercise cost and increasing rowing economy compared to the control condition. Changing the mandibular position benefited a World-class rower, supporting the potential of wearing an intraoral splint in high-level sports, particularly in rowing.

RESUMEN

BACKGROUND: This study evaluates a three-dimensional (3D) visualisation design combined with customized surgical guides to assist anterior maxillary segmental distraction osteogenesis (AMSDO) in correcting maxillary hypoplasia in adolescents with cleft lip and palate (CLP), focusing on treatment outcomes, satisfaction and the validity of 3D planning. METHODS: This retrospective cohort study was conducted at a single hospital in China. Between January 2020 and December 2023, 12 adolescents with CLP with maxillary hypoplasia were included. An advanced 3D simulation was used to convey the treatment strategy to the patients and their families. A customized surgical guide and distraction osteogenesis device were designed. Cephalometric analysis evaluated AMSDO changes and long-term stability. Patient satisfaction was assessed. The Chinese version of the Child Oral Health Impact Profile was used to evaluate the children's oral health-related quality of life before and after treatment. The postoperative outcomes were compared with the planned outcomes by superimposing the actual postoperative data onto the simulated soft tissue models and calculating the linear and angular differences between them. RESULTS: One patient experienced postoperative gingivitis, yielding an 8.33% complication rate. Most patients (83.33%) were highly satisfied with the target position, with the rest content. Cephalometric analysis showed significant improvements in various indices post-traction. Quality-of-life scores significantly improved post-treatment. The discrepancies in facial soft tissue between the simulated and actual results were within clinically satisfactory ranges. CONCLUSIONS: Digitally designed surgical guides effectively treat maxillary hypoplasia in adolescents with CLP, ensuring stability, reducing complications, reducing dependency on operator experience, and enhancing satisfaction and health outcomes. Although the simulated results were clinically acceptable, it is important to inform patients of potential variations in the predicted soft tissue.

Asunto(s)

RESUMEN

PURPOSE: This study aimed to comparatively analyze full-arch mandibular reconstruction using dental implants. It focused on two distinct prosthesis configurations: completely splinted and segmentally splinted. These configurations were evaluated under two different occlusal schemes-group function and canine guidance-utilizing finite element analysis (FEA). MATERIALS AND METHODS: The methodology involved developing three-dimensional finite element models from computed tomography data acquired from an edentulous patient. Six dental implants were utilized to complete the mandibular reconstruction. Prosthetic reconstruction was conducted with completely and segmentally splinted prostheses, each employing group function and canine guidance occlusal schemes. Consequently, four distinct models were analyzed. Following meshing, a 200 N load was applied at a 30-degree angle. Subsequent evaluation encompassed stress, strain distribution, and the overall deformation of the implants, crowns, and underlying bone structure assessment. RESULTS: The group function occlusal scheme generally exhibited lower stress values than the canine guidance occlusal scheme, with three-piece prostheses demonstrating even lower stress levels than one-piece prostheses. Conversely, the canine guidance occlusal scheme exhibited higher stress values overall. CONCLUSION: The findings of this study may assist clinicians in selecting the most effective occlusal scheme and prosthetic configuration for implant-supported mandibular restorations, potentially enhancing treatment outcomes and reducing the risk of mechanical complications. In summary, results indicated that group function loading, irrespective of prosthesis type, offers more uniform load distribution and lower stress values, making it a preferable choice over canine guidance. Within the group function occlusal scheme, three-piece prostheses demonstrated lower stress values than one-piece prostheses, but the clinical significance of this difference appears to be minimal.

RESUMEN

Three-dimensional (3D) printing has slowly become an integral part of orthognathic surgery. However, there is a lack of studies evaluating accuracy of orthognathic surgical splints fabricated from subtractive milling versus additive 3D printing. The primary aim of this in vitro study was to compare the differences in trueness between milled and 3D-printed splints, while the secondary aim was to compare the differences in clinical fit of these splints. A sample of eight patients was selected, and STL files of the final orthognathic surgical splint were used to fabricate three splints for each of the eight cases. The first splint was fabricated by subtractive milling (SM), whereas the second and third splints were 3D printed with Digital Light Processing (DLP) and Laser Stereolithography (SLA), respectively. Paired superimposition of scans was performed using a reference model. The clinical fit of the splints to the printed models was also assessed. The mean root mean square (RMS) deviations for the SM, SLA, and DLP were 0.11 ± 0.02, 0.16 ± 0.02 and 0.14 ± 0.02 respectively. The post-hoc analysis showed that the SM splints had the highest accuracy (p<0.01). However, DLP splints showed the best clinical fit, followed by SM and SLA. In conclusion, splints fabricated by SM were more accurate than those fabricated by 3D printing, although this difference may not be clinically significant. The site, rather than the magnitude of the errors, may have a greater effect on the clinical usability of splints. In general, SM and DLP splints demonstrated a good clinical fit and were suitable for the fabrication of surgical splints.

RESUMEN

BACKGROUND: Temporomandibular disorders (TMDs) frequently cause orofacial pain and dysfunction, with treatment options spanning from conservative therapies to invasive surgical procedures. The aim of this systematic review was to analyze and compare the efficacy and safety profiles of conservative, minimally invasive interventions and surgical procedures in patients diagnosed with TMDs and disc displacement. METHODS: Following PRISMA recommendations, PubMed, Scopus, and Web of Science databases were searched for randomized clinical trials (RCT). Data were synthesized in a table and evaluated through the Cochrane risk of bias 2 (RoB 2) tool. RESULTS: Thirty-eight RCTs, most with moderate RoB, were selected. Conservative approaches, including physical therapy and occlusal devices, led to an improvement in symptoms and function. Pharmacological treatments demonstrated effectiveness in reducing pain and improving function; however, they can have undesirable side effects. Minimally invasive and invasive treatments also demonstrated efficacy, although most trials did not show their superiority to conservative treatments. CONCLUSION: The primary approach to TMDs should be a conservative, multimodal treatment plan tailored to patient complaints and characteristics. Treatment goals should focus on symptom control and functional recovery. Surgical treatment should be reserved for cases with a precise diagnosis and a clear etiology.

RESUMEN

Oral and maxillofacial surgery is a specialized surgical field devoted to diagnosing and managing conditions affecting the oral cavity, jaws, face and related structures. In recent years, the integration of 3D printing technology has revolutionized this field, offering a range of innovative surgical devices such as patient-specific implants, surgical guides, splints, bone models and regenerative scaffolds. In this comprehensive review, we primarily focus on examining the utility of 3D-printed surgical devices in the context of oral and maxillofacial surgery and evaluating their efficiency. Initially, we provide an insightful overview of commonly utilized 3D-printed surgical devices, discussing their innovations and clinical applications. Recognizing the pivotal role of materials, we give consideration to suitable biomaterials and printing technology of each device, while also introducing the emerging fields of regenerative scaffolds and bioprinting. Furthermore, we delve into the transformative impact of 3D-printed surgical devices within specific subdivisions of oral and maxillofacial surgery, placing particular emphasis on their rejuvenating effects in bone reconstruction, orthognathic surgery, temporomandibular joint treatment and other applications. Additionally, we elucidate how the integration of 3D printing technology has reshaped clinical workflows and influenced treatment outcomes in oral and maxillofacial surgery, providing updates on advancements in ensuring accuracy and cost-effectiveness in 3D printing-based procedures.

RESUMEN

Background and objectives: This study analyzed and compared the distribution patterns of occlusal forces using T-Scan III before and after the hydrostatic temporary oral splint (Aqualizer Ultra) therapy in healthy subjects and subjects with temporomandibular disorders (TMDs). Materials and Methods: Fifty-one subjects were divided into groups based on anamnesis and responses to the Fonseca questionnaire. The first group, non-TMDs group (n = 19), and the second group, TMDs group (n = 32), had mild-to-severe TMDs, as identified by the Fonseca questionnaire. The non-TMDs group had an average age of 25.4 years (SD = 4.8, range 20-38) with 15 females (78.95%) and 4 males (21.05%). The TMDs group had an average age of 27.4 years (SD = 7.0, range 22-53) with 25 females (78.125%) and 7 males (21.875%). T-Scan III device was used for occlusal analysis before and after hydrostatic splint usage. Results: Significant differences were observed in the TMDs group for anterior and posterior right percentages of forces before and after hydrostatic splint usage. The analysis of force distribution per sector before and after hydrostatic splint therapy showed no significant differences in the non-TMDs group. Analysis of force distributions in the entire study population before and after hydrostatic splint therapy showed significant differences in the anterior and posterior right regions. Occlusal force increased by 32-56% in the front region and decreased in the posterior area after hydrostatic splint usage. Conclusions: Hydrostatic splint therapy is recommended as a part of full-mouth rehabilitation treatment for all patients regardless of the severity of TMDs.

Asunto(s)

RESUMEN

BACKGROUND: This study aims primarily to assess the mandibular condyles and patient response to MAD therapy using cone-beam computed tomography (CBCT). Also, the study proposes to analyze whether variations in condylar position, OSA severity and mandibular protrusion influence patient response. METHODS: 23 patients diagnosed with mild/moderate OSA and treated with MAD comprised the sample. Clinical, CBCT, and PSG assessments were conducted at baseline and with MAD in therapeutic protrusion (4-6 months of MAD use). The condyle position was vertically and horizontally evaluated at baseline and at the therapeutic protrusion. RESULTS: The condyle position significantly changed with MAD, showing anterior (7.3 ± 2.8 mm; p < 0.001) and inferior (3.5 ± 1 mm; p < 0.001) displacement. Patients with mild OSA required more protrusion (p = 0.02) for improvement. Responders exhibited a significantly prominent (p = 0.04) anterior baseline condyle position. A negative modest correlation was found between treatment response and baseline condyle anterior position (p = 0.03; r=-0.4), as well as between OSA severity and the percentage of maximum protrusion needed for therapeutic protrusion (p = 0.02; r=-0.4). The patient protrusion amount did not predict condylar positional changes. Neither condyle position, OSA severity, nor therapeutic protrusion were predictors of MAD treatment response. CONCLUSION: MAD resulted in anterior and inferior condylar displacement, and the amount of protrusion did not predict condylar positional changes. Responders showed a more anterior baseline condyle position. OSA severity and mandibular protrusion did not predict treatment response.

RESUMEN

Background/purpose: Various biofeedback stimulation techniques for managing sleep bruxism (SB) have recently emerged; however, the effect of the successive application of vibratory feedback stimulation has not been clarified. This study aimed to elucidate the effect of vibration feedback stimulation via an oral appliance (OA) on SB. Materials and methods: This prospective, single-arm, open-label intervention study included 20 participants diagnosed with "definite" SB who wore a specially designed OA for 98 nights at home. A force-based SB detection system triggered a vibrator attached to the OA. Vibratory stimulation was withheld during the first 3-week adaptation period (weeks 1-3), applied during the 9-week stimulation period (weeks 4-12), and withheld again during the post-stimulation period (weeks 13-14). The number and duration of SB events per hour of sleep were calculated based on piezoelectric signals recorded with the OA-based vibration feedback device and compared between weeks 3 and 4, 8, 12, and 14 and between weeks 12 and 14 using the Friedman test (post-hoc test with Bonferroni correction). Results: The duration of SB events significantly decreased after vibratory stimulation (weeks 3 versus 4, 8, and 12: P < 0.001, P = 0.026, and P = 0.033, respectively) and then significantly increased upon cessation of vibratory stimulation after the stimulation period (weeks 12 versus 14: P < 0.001). Conclusion: Contingent vibratory stimulation through an OA-based vibration feedback device may suppress SB-related masticatory muscle activity continuously for 9 weeks and may be an effective alternative for managing SB.

RESUMEN

Introduction: A stress fracture is a painful condition which occurs when the adaptive ability of the bone is unbalanced. This imbalance predominantly occurs due to increased intensity, frequency, or duration of training. Identifying the etiology of stress fracture and its proper treatment prevents recurrence. Besides, evidence-based and supervised rehabilitation is indispensable for permanent remission of pain and return to sports to preinjury functional levels. The case series discusses the continuum of stress reaction to stress fracture in athletes, causes of stress fractures, their management, and return to sport. The paper aims to give a clear discussion about the management with rehabilitation guidelines for metabolic causes of stress fractures. Case Report: This study was a case series of five cases coming to Sports Medicine outpatient clinic of Sports Injury Centre, VMMC and Safdarjung Hospital, New Delhi, and physical medicine and rehabilitation outpatient clinic of Sanjay Gandhi Post Graduate Institute of Medical Sciences, Lucknow over a period of 1 year. The discussed cases are young Indian athletes, both male and females, who have presentation along the continuum of medial tibial stress syndrome (MTSS) to stress reactions and stress fracture. Conclusion: The findings of the paper highlight the significance of rehabilitation for individuals suffering from MTSS. Accurate diagnosis with targeted rehabilitation leads to quicker return to sports. The rehabilitation program comprises of identifying and treating the cause of stress fracture, removing any risk factors, biomechanical correction wherever indicated, structured exercise program, training in underwater treadmill, cyclical increase in loading, reducing activity every 3rd week.

RESUMEN

OBJECTIVES: To investigate the flexural strength (FS), elastic modulus (E), Martens hardness (HM), water sorption (wsp), water solubility (wsl) and degree of conversion (DC) of 3D-printed, milled and injection molded splint materials. METHODS: Specimens (N = 1140) were fabricated from five 3D-printed (GR-22 flex, GR-10 guide, ProArt Print Splint clear, V-Print Splint, V-Print Splint comfort), five milled (BioniCut, EldyPlus, ProArt CAD Splint clear, Temp Premium Flexible, Thermeo) and two injection molded (PalaXPress clear, Pro Base Cold) materials. FS, E, HM, wsp, wsl and DC were tested initially (24 h, 37 °C, H2O), after water storage (90 d, 37 °C, H2O) as well as after thermal cycling (5000 thermal cycles, 5/55 °C). Data were analyzed with Kolmogorov-Smirnov, Kruskal- Wallis, Mann-Whitney U test and Spearman's correlation (p < 0.05). RESULTS: Initially, the mean flexural strength values ranged from 1.9 to 90.7 MPa for printed, 3.8 to 107 MPa for milled and 99.7 to 102 MPa for injection molded materials. The initial mean elastic modulus values were 0.0 to 2.4 GPa for printed, 0.1 to 2.7 GPa for milled and 2.8 GPa for injection molded materials. The initial mean Martens hardness values were 14.5 to 126 N/mm2 for printed, 50.2 to 171 N/mm2 for milled and 143 to 151 N/mm2 for injection molded materials. Initially, the mean water sorption values ranged from 23.1 to 41.2 µg/mm3 for printed, 4.5 to 23.5 µg/mm3 for milled and from 22.5 to 23.3 µg/ mm3 for injection molded materials. The initial mean water solubility values ranged from 2.2 to 7.1 µg/mm3 for printed, 0.0 to 0.5 µg/mm3 for milled and 0.1 to 0.3 µg/mm3 for injection molded materials. After water storage and thermal cycling most of the values decreased and some increased. The mean DC values ranged initially from 72.3 to 94.5 %, after water storage from 74.2 to 96.8 % and after thermal cycling from 75.6 to 95.4 % for the printed materials. SIGNIFICANCE: The mechanical and physical properties of printed, milled and injection molded materials for occlusal devices vary and are influenced by aging processes. For clinical applications, materials need to be chosen according to the specific indications.

Asunto(s)

RESUMEN

Background/aims Medial tibial stress syndrome (MTSS), also known as "shin splint", is most often described as exertional leg pain along the shinbone (tibia), which occurs due to the inflammation of the muscles, tendons, and bone tissue in this area. This study aims to assess the prevalence, risk factors, and their association with the development of MTSS, as well as the effective treatments that reduce pain and improve functions among the Saudi general population. Materials and method The present cross-sectional study was conducted on the general population of Saudi Arabia through an electronic survey over a period of three months. The study sample of 443 patients was deemed and considered. The study included participants from the general population in Saudi Arabia above the age of 18. A structured self-response questionnaire was given to the participants after institutional research ethical approval was obtained for the study. Results Among the 443 participants, the majority were male (n = 228, 51.5%), aged 18-29 (n = 227, 51.2%), and residing in the central region of Saudi Arabia (n = 398, 89.8%). Most participants reported engaging in sporting activities (n = 211, 47.6%), with high-intensity training being the most common (n = 93, 44.1%). Only a small proportion (n = 8, 1.8%) reported a previous diagnosis of MTSS. Analysis revealed associations between MTSS prevalence and certain demographic factors, including walking surface preferences and engagement in specific sports. Treatment strategies for MTSS included rest, ice application, physiotherapy, and pain-relieving medication, with varying degrees of satisfaction and recurrence rates among participants. Conclusion The study provides valuable insights into the prevalence, risk factors, management, and preventive measures related to MTSS among the Saudi general population. While certain demographic factors and exercise practices were associated with MTSS prevalence, effective treatment options such as rest, physiotherapy, and appropriate footwear were reported. Moreover, adherence to preventive measures such as stretching, proper footwear selection, and gradual training progression may help mitigate the risk of MTSS development.

RESUMEN

Aim: Internal disc displacement of the temporomandibular joint (TMJ) is identified by an anomaly between the condylar-disc assembly, which, in many cases, may lead to discomfort and malfunction of the chewing function. The study's objective was to assess the effects of four distinct treatment approaches on temporomandibular disorder cases with anterior disc displacements focusing on their chewing efficiency. Materials and Methods: One hundred participants suffering from reducible TMJ disc displacement were selected for enrollment in the study. Subjects were divided equally into four groups: group I patients were treated with behavioral therapy; group II patients were treated with low-level laser therapy (LLLT); group III patients were treated with anterior repositioning splints; and group IV patients were treated with flat plane splints. Chewing efficiency was assessed utilizing the fractional sieving method and a synthetic food substitute was created using silicon impression material. The statistical analysis encompassed comparisons of chewing efficiency between groups and between baseline and posttreatment within each group, employing analysis of variance (ANOVA) and paired t tests, respectively. Results: Using the paired t test, a significant difference in chewing efficiency values as expressed by the median particle size was observed between the baseline and 6-month values in all groups (P < 0.05), except for group I where no significant change was noted over the 6 months (P > 0.05). The one-way ANOVA test revealed a statistically significant difference among groups following therapies (P ˂ 0.05). The post hoc Tukey test was employed for pairwise comparisons and revealed statistically significant variances in the main values of chewing efficiency among all groups at a 95% confidence level (P ˂ 0.05). Conclusion: The study's results suggest that occlusal splints and LLLT are more effective in improving chewing efficiency than behavioral interventions.

RESUMEN

Bilateral humerus fractures as a result of birth trauma are a rare occurrence in neonatal care, necessitating special consideration due to their potential long-term implications. Birth-related injuries involving neonatal skeletal structures, especially fractures of the humerus, require special attention and a comprehensive approach to diagnosis and management. Here, we present the case of a newborn female child who experienced bilateral humerus fractures due to birth trauma. The subsequent management involved the application of splints to immobilize the affected arms, a standard practice in the treatment of fractures.

RESUMEN

OBJECTIVES: The aim of this superiority trial was to investigate the clinical outcomes of arthrocentesis as an early treatment supported by use of an occlusal splint vs use of an occlusal splint only in the management of temporomandibular joint (TMJ) arthralgia. METHODS: Ninety-five adults presenting with TMJ arthralgia were recruited into the study and randomised into 2 groups: Group 1 received arthrocentesis as an early treatment supported by use of an occlusal splint, whereas group 2 received treatment with an occlusal splint only. Seventy-four patients (group 1: n = 37; group 2: n = 37) completed the 1-year follow-up schedule and were included in the final analysis. Reduction of pain intensity measured by a numeric rating scale and increase in mouth opening distance (unassisted maximal, assisted maximal, and pain-free) was seen in both treatment groups. RESULTS: In group 1, pain intensity significantly decreased at 6 weeks and all subsequent time points compared with group 2. In terms of mouth opening distance, a significant improvement was observed in both groups during the course of treatment, but statistical significance was not seen between the 2 treatment groups. CONCLUSIONS: Early arthrocentesis supported by use of an occlusal splint is superior to use of an occlusal splint alone in the treatment of TMJ arthralgia. Arthrocentesis with occlusal splint support could be discussed as first-line treatment for arthralgia of the TMJ, which may co-occur with various painful and nonpainful conditions of TMJ disorders.

RESUMEN

BACKGROUND: Carpal tunnel syndrome (CTS) is a common musculoskeletal problem in pregnancy. The aim of this study is to compare the effects of rigid and elastic wrist splints on edema, pain levels, grip strength, and upper-extremity functionality in pregnant women with CTS. METHODS: Forty-one pregnant women in the last trimester of pregnancy who were diagnosed with CTS were included in the study. The grip strength was evaluated with the Jamar hand dynamometer, functionality with the Quick Disabilities of the Arm, Shoulder, and Hand and Boston Carpal Tunnel Syndrome Questionnaire, pain with the Visual Analog Scale (VAS), and edema with the water overflow method. RESULTS: The mean age of the participants was 31.71 ± 5.78 years, body mass index was 28.85 ± 3.63 kg/m2, duration of pain was 2.24 ± 0.79 months, and their pain intensity was 6.63 ± 1.69 according to the VAS. As a result of the study, reductions in pain (P = .001), increases in functionality values (P = .001), increases in grip strength (P = .001), and decreases in edema (P = .001) were observed in both groups after the treatment. However, there was no significant difference in pain, functionality, or grip strength values between the groups after the treatment (P > .05). CONCLUSION: In this study comparing the effects of a wrist splint to those of an elastic splint, both treatment methods for pregnant women with CTS decreased pain and edema, increased grip strength, and improved upper-extremity functionality. Considering individual needs, characteristics, and living conditions, both splints can be recommended for pregnant women with CTS.

RESUMEN

OBJECTIVES: Material chemistry and workflow variables associated with the fabrication of dental devices may affect the biocompatibility of the dental devices. The purpose of this study was to compare digital and conventional workflow procedures in the manufacturing of acrylic-based occlusal devices by assessing the cytotoxic potential of leakage products. METHODS: Specimens were manufactured by 3D printing (stereolithography and digital light processing), milling, and autopolymerization. Print specimens were also subjected to different post-curing methods. To assess biocompatibility, a human tongue epithelial cell line was exposed to material-based extracts. Cell viability was measured by MTT assay while Western blot assessed the expression level of selected cytoprotective proteins. RESULTS: Extracts from the Splint 2.0 material printed with DLP technology and post-cured with the Asiga Flash showed the clearest loss of cell viability. The milled and autopolymerized materials also showed a significant reduction in cell viability. However, by storing the autopolymerized material in dH2O for 12 h, no significant viability loss was observed. Increased levels of cytoprotective proteins were seen in cells exposed to extracts from the print materials and the autopolymerized material. Similarly to the effect on viability loss, storing the autopolymerized material in dH2O for 12 h reduced this effect. CONCLUSIONS/CLINICAL RELEVANCE: Based on the biocompatibility assessments, clinical outcomes of acrylic-based occlusal device materials may be affected by the choice of manufacturing technique and workflow procedures.

Asunto(s)

RESUMEN

INTRODUCTION: Climate change is estimated to be the biggest global health threat of the 21st century, and has prompted calls to move away from processes in healthcare associated with high energy consumption and greenhouse gas emission. In musculoskeletal medicine, splints are widely used for limb immobilisation. These have typically been made from single-use materials such as gypsum, although in recent years purportedly environmentally friendly splints have been designed. In this systematic review, we set out to assess the clinical effectiveness of all commercially available environmentally friendly splinting materials, including Woodcast®. METHODS: The AMED (Allied and Complementary Medicine Database), CINAHL® (Cumulative Index to Nursing and Allied Health Literature), Cochrane Central Register of Controlled Trials, Embase®, Emcare® and MEDLINE® databases were searched to identify studies assessing the clinical effectiveness of biodegradable and environmentally friendly splints prior to paper review and data extraction. Formal quantitative synthesis was not possible owing to the substantial heterogeneity in the study designs and outcome measures. RESULTS: Six papers met the inclusion criteria, all investigating one particular splint material (Woodcast®). One was a case series, two were cohort studies and three were randomised controlled trials. Primary outcome measures were heterogeneous but the environmentally friendly splints were generally equivalent to traditional splint materials. Studies were mostly at a high risk of bias. CONCLUSIONS: There is limited research assessing 'green' splints in practice although the data suggest similarity with existing materials and no substantial safety concerns. Further scrutiny of the clinical effectiveness and environmental credentials of such splints is also required.

Asunto(s)

RESUMEN

BACKGROUND: The application of transseptal suturing as an alternative to intranasal splints in preventing postoperative complications, such as synechia, and maintaining nasal septal stability following Septoplasty, remains controversial. This meta-analysis aims to systematically compare the effectiveness and safety of transseptal suturing with intranasal splints after Septoplasty. METHODS: A comprehensive systematic literature review based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines was conducted. The review included randomized clinical trials (RCTs) identified through a database search in July 2023, comparing postoperative complications following Septoplasty with the transseptal suturing technique versus intranasal splints. RESULTS: Eight published RCTs involving 570 participants were included in the meta-analysis. The analysis revealed no significant difference between the transseptal suturing and intranasal splint techniques following Septoplasty in postoperative complications, including postoperative hemorrhage, synechia, septal hematoma, septal perforation, local infection, crusting, and residual septal deviation. CONCLUSIONS: Transseptal suturing can be applied following Septoplasty as an alternative to intranasal splints without increasing the rate of postoperative complications. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.