RESUMEN
Zinc oxide nanoparticles were synthesized from the leaf extract of Brassica oleracea L. Acephala group (collard green) followed by their characterization using Scanning Electron Microscope (SEM), and Energy Dispersive X-ray (EDX). The antibacterial properties of zinc nanoparticles were tested against Gram-negative bacteria, Pseudomonas aeruginosa (ATCC ® 9027™), Escherichia coli (ATCC ® 8739™), Klebsiella pneumoniae (ATCC® BAA-1705™) and Gram-positive bacteria, Staphylococcus aureus (ATCC ® 6538™) and Listeria monocytogenes (ATCC ® 13932™), at four different concentrations (50.00 µg/ml, 100.00 µg/ml, 500.00 µg/ml and 1 mg/ml) of zinc oxide nanoparticles suspension. Results revealed that the synthesized nanoparticles exhibit strong antibacterial effects against Pseudomonas aeruginosa, Listeria monocytogenes, Klebsiella pneumonia, Staphylococcus aureus and Escherichia coli at 500.00 µg/ml-1 mg/ml concentrations. An increase in efficacy of nanoparticles with the decrease of their size was also evident. This is a first ever report on Brassica oleracea, L. based nanoparticles which demonstrates that 500.00 µg-1 mg/ml conc. of zinc oxide nanoparticles have antibacterial activity against both Gram -ve and Gram +ve bacteria and have the potential to be considered as an antibacterial agent in future.
Nanopartículas de óxido de zinco foram sintetizadas a partir do extrato foliar de Brassica oleracea L., grupo Acephala (couve), seguidas de sua caracterização em Microscópio Eletrônico de Varredura (MEV) e Raio X por Energia Dispersiva (EDX). As propriedades antibacterianas das nanopartículas de zinco foram testadas em bactérias Gram-negativas, Pseudomonas aeruginosa (ATCC® 9027™), Escherichia coli (ATCC® 8739™) e Klebsiella pneumoniae (ATCC® BAA-1705™), e bactérias Gram-positivas, Staphylococcus aureus (ATCC® 6538™) e Listeria monocytogenes (ATCC® 13932™), em quatro concentrações diferentes (50,00 µg / ml; 100,00 µg / ml; 500,00 µg / ml; e 1 mg / ml) de suspensão de nanopartículas de óxido de zinco. Os resultados revelaram que as nanopartículas sintetizadas exibem fortes efeitos antibacterianos contra P. aeruginosa, L. monocytogenes, K. pneumonia, S. aureus e E. coli em concentrações de 500,00 µg / ml-1 mg / ml. Um aumento na eficácia das nanopartículas com a diminuição de seu tamanho também foi evidente. Este é o primeiro relatório sobre nanopartículas à base de B. oleracea L. que demonstra que 500,00 µg-1 mg / ml de concentração de nanopartículas de óxido de zinco têm atividade antibacteriana contra bactérias Gram-negativas e Gram-positivas e que essas nanopartículas têm potencial para ser consideradas um agente antibacteriano no futuro.
Asunto(s)
Óxido de Zinc , Brassica , Nanopartículas , Antibacterianos , Bacterias Gramnegativas , Bacterias GrampositivasRESUMEN
SUMMARY: The Bactrian camel, which is native to China and Mongolia, is large in size and is an even-toed ungulate species. The double humps on the Bactrian camel back differentiate it from the dromedary camel, which has a single hump. This species has adapted to unsuitable conditions (lack of food and water) in the Gobi Desert and is advanced in unique anatomical and physiological characteristics during a prolonged evolution period. Several studies have been conducted on the anatomical features of the Bactrian camel, but none have given attention to the alveolar capillaries of the Bactrian camel lung. Therefore, the current study aims to explore the architecture of the alveolar capillary in the Bactrian camel lung and further explain the mechanism of blood flow in its lung. The current study extracted and examined the architecture of the alveolar capillary in the lung of the Bactrian camel (Camelus bactrianus) and further explained the mechanism of blood flow by performing lung casting and replica scanning electron microscopy methods. The reports showed that the resources of the alveolar-capillary originated from the capillaries of the subpleural space or interlobular septulum, sometimes originating from the precapillary arterioles or directly from the terminal arterioles. The alveolar capillaries anastomosed and formed a single layer of dense, basket-like network surrounding the alveolus. The mash diameter of the alveolar-capillary network was larger than that of the capillary, and the appearance of the mash was oval and elliptical. Many of the collapsed alveolar-capillary networks were found in the alveolar microvascular architecture in the lung of the Bactrian camel. The study found that, due to many collapsed alveoli in the Bactrian camel lung, the disproportional pressure between the pulmonary alveoli induced less imbalance of blood flow in the alveolar capillary, which affected the gas exchange efficiency. Therefore, the function of the anastomosing capillary branch was likely to regulate the blood flow between the alveolar-capillary network.
RESUMEN: El camello bactriano, es originario de China y Mongolia, es de gran tamaño y es una especie de ungulado de dedos pares. Las dobles jorobas del lomo del camello bactriano lo diferencian del dromedario, que tiene una sola joroba. Esta especie se ha adaptado a condiciones inadecuadas (falta de alimento y agua) en el desierto de Gobi y ha avanzado en características anatómicas y fisiológicas únicas durante un período de evolución prolongado. Se han realizado varios estudios sobre las características anatómicas del camello bactriano, pero ninguno ha prestado atención a los capilares alveolares del pulmón de este animal. Por lo tanto, el presente estudio tuvo como objetivo principal explorar la arquitectura del capilar alveolar en el pulmón del camello bactriano y explicar el mecanismo del flujo sanguíneo. A partir de nuestro trabajo se examinó la arquitectura del capilar alveolar en el pulmón del camello bactriano (Camelus bactrianus) mediante la realización de métodos de microscopía electrónica de barrido y escaneo pulmonar. Los informes mostraron que los recursos del alvéolo-capilar se originaban en los capilares del espacio subpleural o del tabique interlobulillar y a veces se originaban en las arteriolas precapilares o directamente en las arteriolas terminales. Los capilares alveolares se anastomosaban y formaban una densa red de capa única en forma de cesta que rodeaba el alvéolo. El diámetro del macerado de la red alveolar-capilar era mayor que el del capilar y el aspecto del macerado era ovalado y elíptico. Muchas de las redes alvéolo-capilares colapsadas se encontraron en la arquitectura microvascular alveolar en el pulmón del camello bactriano. El estudio encontró que, muchos alvéolos colapsados en el pulmón del camello bactriano, la presión desproporcionada entre los alvéolos pulmonares inducía un menor desequilibrio del flujo sanguíneo en el capilar alveolar, lo que afectaba la eficiencia del intercambio de gases. Por lo tanto, la función de la rama capilar anastomosante probablemente regularía el flujo sanguíneo entre la red alveolar-capilar.
Asunto(s)
Animales , Alveolos Pulmonares/irrigación sanguínea , Alveolos Pulmonares/ultraestructura , Capilares/anatomía & histología , Capilares/ultraestructura , Camelus/anatomía & histología , Pulmón/irrigación sanguínea , Pulmón/ultraestructura , Microscopía Electrónica de RastreoRESUMEN
Resumen Los trabajos sobre palpos labiales son muy escasos en Lepidoptera y requieren del uso del microscopio electrónico de barrido. Los tres artejos de los palpos labiales de la coliadina Prestonia clarki se describen e ilustran, así como la distribución de las sensilas y de sus estructuras más distintivas: la mancha sensitiva de Reuter y el órgano Palp pit; el artejo basal es de mayor longitud y el distal el de menor. Se encontraron sensilas quéticas tipo 1 en la superficie de la vista lateral externa de los tres artejos. Las sensilas son más especializadas en el parche o mancha sensitiva de Reuter y en el órgano Palp pit. En la vista lateral interna de la sección proximal del artejo basal se observó esa mancha, la cual comprende un área alargada que integra cientos de microtriquias, diferenciada en tres secciones, cuya área adyacente muestra menor número de microtriquias y de menor longitud. En un corte longitudinal del artejo distal, en su porción más apical, se observó el órgano Palp pit, con forma de botella; en su interior se alojan dos tipos de estructuras, cuya disposición fue: sensilas celocónicas en la sección basal y microtriquias en la distal. Además, se encontraron en el interior del Palp pit dos tipos sensilares de difícil determinación, se denominaron sensilas quéticas tipos 2 y 3, así como las sensilas quéticas tipo 1, localizadas en el borde del Palp pit. Los tipos encontrados y su distribución en el Palp pit coinciden con lo descrito por varios autores en otras especies de lepidópteros.
Abstract Research on labial palps of Lepidoptera is scarce and requires the use of Scanning Electron Microscopy techniques. We describe and illustrate the three segments composing the labial palps of the Coliadinae butterfly Prestonia clarki, as well as the distribution of sensilla and both of palp's distinctive structures: the Reuter's sensitive patch and the Palp pit organ; in the palps, the basal segment is the longest, and the distal segment is the shortest. We found chaetic sensilla type 1 on the lateral outer surface of the segments. In the Reuter's sensitive patch and the Palp pit organ, sensilla are specialized. In a lateral internal view of the proximal section of the basal segment, Reuter's sensitive patch looks as an elongated area with hundreds of microtrichia, differentiated into three sections; the adjacent area shows fewer microtrichia of shorter length. In a longitudinal view of the distal segment, at the apex of the segment, is the bottle-shaped Palp pit organ; inside the Palp pit are coeloconic sensilla in the basal section and microtrichia in the distal one. In addition, two indeterminate types of sensilla similar to chaetic ones were found within the Palp pit; which we called chaetic sensilla types 2 and 3; chaetic sensilla type 1 are located on the edge of the Palp pit. The sensilla types and their distribution in the Palp pit agree with those described in other species of Lepidoptera. Rev. Biol. Trop. 66(3): 1324-1346. Epub 2018 September 01.
Asunto(s)
Animales , Mariposas Diurnas/clasificación , Clasificación , Lepidópteros/anatomía & histología , MéxicoRESUMEN
Abstract Trans-endodontic implants are an artificial extension through root apex anchored in periradicular bone tissue. The aim is to improve the crown-root ratio and to provide stability to dental organ present. Zirconium oxide (ZrO2) is a material of great technological importance, having good natural color, high strength, high toughness, high chemical stability, does not suffer any corrosion, chemical and microbial resistance and excellent esthetic properties. Objective: The aim of this study was to evaluate chemical and microscopy of surface conditions of ZrO2 trans-endodontic implant. Materials and Methods: A blocks of ZrO2 were manufactured for produce trans-endodontic implants and divided in two groups: monoclinic and tetragonal phase. They were evaluated using Scanning Electroning Microscope (SEM), EnergyDispersive X-ray Spectroscopy (EDS), and Atomic Force Microscope (AFM) and Vickers Micro hardness. Results: The Monoclinic phase through AFM analysis showed roughness Ra = 0.320μm, whereas in the Tetragonal phase was 0.126μm, SEM/EDX indicated that the phases are not properly uniform and the addition of the Yttrium to favor the stabilization of the Tetragonal phase. The Vickers hardness analysis showed a value of 1500HV. Conclusion: The characterization of the surface of trans-endodontic zirconium oxide implants provides a guideline to know the surface characteristics of the material, since a greater roughness on the surface of the implant will favor the Osseo-integration capacity.
Resumen Los implantes trans-endodónticos son una extensión artificial a través del ápice radicular anclado en el tejido óseo periradicular. El objetivo es mejorar la relación corona-raíz y proporcionar estabilidad al órgano dental presente. El óxido de zirconio (ZrO2) es un material de gran importancia tecnológica, con buen color natural, alta resistencia, alta tenacidad, alta estabilidad química, no sufre corrosión, resistencia química y microbiana y excelentes propiedades estéticas. Objetivo: El objetivo de este estudio fue evaluar las condiciones superficiales de ZrO2 para su aplicación clínica a los implantes transendodónticos. Materiales y Métodos: se trituraron bloques de ZrO2 en implantes trans-endodónticos y se dividieron en: monoclínico y tetragonal. Luego se evaluaron mediante microscopía electrónica de barrido (SEM), espectroscopia de rayos X de energía dispersiva (EDS) y microscopio de fuerza atómica (AFM) y microdureza vickers. Resultados: La fase monoclínica a través del análisis AFM presenta Ra = 0.320 μm, mientras que en la fase Tetragonal es 0.126 μm, SEM / EDS muestra que las fases no son adecuadamente uniformes y la adición del Ytrio para favorecer la estabilización de la fase tetragonal. El análisis de microdureza mostro un valor de 1500HV. Conclusión: La caracterización de la superficie de los implantes trans-endodónticos de óxido de zirconio, brinda una pauta para conocer las características superficiales del material, ya que al haber una mayor rugosidad en la superficie del implante se verá favorecida la capacidad de oseointegración.
Asunto(s)
Espectrometría por Rayos X , Circonio/uso terapéutico , Implantes Dentales/microbiologíaRESUMEN
This paper presents a comparison of the morphological structure of the filiform papillae in New Zealand white rabbits as domestic mammals and Egyptian fruit bats as wild mammals. This study was carried out on the tongues of adult healthy New Zealand white rabbits and Egyptian fruit bats of both sexes. There were four types of lingual papillae in both animals. In the Egyptian fruit bats, there were six subtypes of the filiform papillae; three on the anterior part (small, conical and giant), two on the middle part (cornflower and leaf-like papillae) while the posterior part contain rosette shape filiform papillae, in addition to transitional papillae and conical papillae. In New Zealand white rabbits, there were four subtypes of filiform papillae; spoonful conical (on the lingual anterior part), processed (at the anterior edge of lingual prominence), leaf-like (on the posterior area of lingual prominence) and triangular filiform papillae (on the lingual root). The shape, size, number and orientation of the lingual papillae itself and its processes varied according to their location within the tongue (region-specific) in relation to the feeding habits, strategies for obtaining food, climate conditions, and types of food particles.
Se comparó la estructura morfológica de las papilas filiformes de un mamífero doméstico (conejo neozelandes) y de un mamífero silvestre (murciélagos de la fruta egipcio). El estudio fue realizado en animales de ambos sexos. Se observó cuatro tipos de papilas linguales, en ambas especies de animales. En los murciélagos de la fruta egipcio se observaron seis subtipos de papilas filiformes; tres en la parte anterior (pequeño, cónico y gigante), dos en la parte media (aciano y hojas como papilas) mientras que en la parte posterior se observaron papilas filiformes y papilas de transición cónica. En los conejos se observaron cuatro subtipos de papilas filiformes; cónica cucharada (en la parte anterior lingual), procesado (en el margen anterior de la prominencia lingual), tipo hoja (en la zona posterior de la prominencia lingual) y papilas filiformes triangulares (en la raíz lingual). La forma, tamaño, número y orientación de las papilas linguales y sus procesos varían de acuerdo a la función y a la ubicación en la lengua (específicos de la región) en relación con los hábitos de alimentación, las estrategias para la obtención de alimentos, las condiciones climáticas y tipos de partículas de alimentos.
Asunto(s)
Animales , Conejos/anatomía & histología , Lengua/ultraestructura , Microscopía Electrónica de Rastreo , Quirópteros/anatomía & histología , Conducta AlimentariaRESUMEN
Objetivo: Avaliar comparativamente, em costela bovina, a deformação, a rugosidade e a perda de massa, de três diferentes tipos de tratamento de superfície de fresas, utilizadas em osteotomias, para instalação de implantes osseointegráveis. Materiais e método: Foram utilizadas 25 costelas bovinas e 3 tipos de fresas helicoidais de 2.0 mm e 3.0 mm para osteotomias para instalação de implantes (Fresa de aço (G1), Fresa com revestimento de filme de Carboneto de Tungstênio em Matriz de Carbono (G2) e Fresa de Zircônia (G3)), que foram subdivididas em 5 subgrupos: 1 fresas sem uso e 2, 3, 4 e 5 correspondente ao número de perfurações 10, 20, 30 e 40, respectivamente. Todas as fresas foram submetidas a medidas de rugosidade (Ra, Rz e Rmáx), massa (gramas) e análise em microscópio eletrônico de varredura (MEV) antes e após uso. Os dados foram tabulados e submetidos a análise estatística através do Teste de Kruskal-Wallis e, quando encontrada diferença estatisticamente significante, ao Teste de Dunn. Resultados: Houve perda de massa em todos os grupos (G1, G2 e G3), sendo essa redução de forma gradual, conforme o número de perfurações realizadas (1, 2, 3, 4 e 5). Mas esta diferença não foi estatisticamente significante (P<0,05). Ao analisarmos os testes de rugosidade o G3 apresentou aumento de Ra, Rz e Rmáx (P<0,05) em relação ao G2. E um aumento de Ra em relação ao G1. Não houve diferença estatisticamente significante (P<0,05) entre G1 e G2. Na análise por microscopia eletrônica de varredura (MEV) foram observadas áreas de deformação em todas as amostras de 2.0 mm, com perda de substratos, sendo o G3 o que mais apresentou essas características. Conclusão: As fresas de Zircônia de 2.0 mm apresentaram maior perda de substratos e desgaste por abrasão, na região de corte. Apresentaram, também, um aumento de rugosidade em relação as de aço e as de revestimento de filme de Carboneto de Tungstênio em Matriz de Carbono (WC/C). Não houve diferença estatisticamente...
Purpose: Evaluate comparativily, in bovine ribs, the deformation, rugosity and loss of mass, in three different types of bur covering, used in dental implants osteotomy. Materials and methods: Twenty five (25) bovine ribs and three (3) types of helical burs of 2.0 mm and 3.0 mm for dental implant bed preparation had been used (Stell Bur (G1), Tungsten Carbid inCarbon Matriz Bur (G2) and Zirconia Bur (G3)), that they had been subdivided in five sub-groups: 1 bur without use and 2, 3, 4 and 5 correspondent to the number of perfurations: 10, 20, 30 and 40, respectively. All burs had been measure in rugosity tests (Ra, Rz and Rmax), mass (gram) and scanning electron microscope (SEM) analisys before and after use. The data had been tabulated and submitted to statistical analysis through Kruskal-Wallis Test and, when significant statistical differnces were found, to Dunn Methods Test. Results: Loss of mass where found in all groups (G1, G2 and G3), being this reduction in gradual form as the number of carried through perfurations (1, 2, 3, 4 and 5). But this difference was not statistical significant (P<0,05). When analyzing the rugosity tests the G3 presented increase of Ra, Rz and Rmax (P<0,05) in relation to G2. And a increase of Ra in relation to G1. It did not have significany statistical difference (P<0,05) between G1 and G2. In the scanning electron microscope (SEM) analysis it was observed in all the 2.0 mm samples plastic deformation and drill wear, having been G3 what more it presented these characteristics. Conclusion: The 2.0 mm Zirconia burs had presented major consuming and drill wear in the cutting area. They had presented, also, an increase of rugosity related to G1 and G2. There was no significant statistical diferences between G1 and G2 in no carried through mechanical test