RESUMEN

Objective: This laboratory study evaluated the effect of Salvadora persica (S. persica) root extracts and Chlorhexidine Digluconate (CHX) on the antibacterial and surface hardness properties of glass ionomer cement (GIC). Methods: The in vitro experimental study was conducted at the Baqai Institute of Pharmaceutical Sciences of Baqai Medical University, Karachi, Pakistan, from October 2022 to March 2023. There were a total four experimental groups. The first group consisted of ethanol extract (GIC-SPEE) and second group consisted of hexane extract as (GIC-SPHE) both prepared from Salvadora persica root respectively, and mixed with liquid of GIC separately. The third group comprised chlorhexidine (GIC-CHX) that was also mixing into liquid portion of GIC and the last group was Control i.e. (cGIC). The GIC samples were prepared by using stainless steel metallic moulds with dimension (5mm x 2mm), following the manufacturer guidelines. Antibacterial activity against Streptococcus mutans was done by disc diffusion test (DDT), and surface hardness test was done by Vickers hardness tester. Statistical analysis was performed using One-Way ANOVA and Tukey's post hoc tests (p<0.05). Results: The antibacterial activity against S. mutans reported that the maximum zone of inhibition was obtained at 3 wt% by the GIC-SPEE, when compared with other experimental groups. For surface hardness, the highest mean and standard deviation and significant findings was reported by the group GIC-SPEE. Conclusions: Considering the outcome of this in vitro study, it can be concluded that the addition of 3 wt% GIC-SPEE increased the surface hardness and antibacterial activity against Streptococcus mutans.

RESUMEN

Introduction Provisional prosthetic restorations play a crucial role in dentistry by protecting dentinal tubules, offering thermal insulation, and ensuring a precise fit during dental treatments. Computer-aided design and computer-aided manufacturing (CAD/CAM) have improved polymethyl methacrylate (PMMA), enhancing its mechanical properties such as hardness and resistance compared to traditional methods. However, bacterial accumulation remains a challenge due to inherent surface roughness. This study aims to assess and compare Streptococcus mutans adhesion on milled PMMA and conventional self-cure acrylic resin, providing insights into their microbial interaction dynamics. Materials and methods This study was a prospective trial approved by the Institutional Human Ethical Committee (SRB-IHEC) (registration number: IHEC/SDC/PROSTHO-2104/24/045) and registered in the Clinical Trial Registry, India (registration number: CTRI/2024/05/068196). The study involved 20 patients requiring single crowns in the right and left molar regions. Two groups were established: Group I (the milled PMMA group) and Group II (the conventional PMMA group). Criteria for participant selection and exclusion were set. A total of 120 swab samples from the buccal mucosa and tooth surfaces were collected before tooth preparation (the baseline) at one week and three weeks. Culture for S. mutans was done, and colony-forming units were counted. Data analysis was carried out using IBM SPSS Statistics for Windows, Version 26 (Released 2019; IBM Corp., Armonk, New York, United States). An independent sample t-test was employed to compare the two materials for crowns. To analyze changes over time within each group, a repeated-measures analysis of variance (ANOVA) was conducted. When the ANOVA test indicated significance, Tukey's post-hoc test was utilized for pairwise mean comparison. The level of significance was set at P < 0.05. Results The mean colony-forming units (CFU) counts for the milled PMMA group were 4.46 ± 0.167 CFU at baseline, 4.163 ± 0.058 CFU at one week, and 3.87 ± 0.19 CFU at three weeks. The mean CFU counts for the conventional PMMA group were 4.41 ± 0.13 CFU at baseline, 4.29 ± 0.114 CFU at one week, and 4.16 ± 0.108 CFU at three weeks. At baseline (before cementation), there was no difference between milled PMMA and conventional PMMA (P = 0.578). After one week, a significant difference between milled PMMA and conventional PMMA was observed (P < 0.005). After three weeks, a significant difference between milled PMMA and conventional PMMA persisted (P < 0.005).  Conclusion There was a significant reduction in microbial adhesion in both the milled and conventional PMMA groups. However, milled PMMA demonstrated a greater decrease in microbial adhesion as compared to conventional PMMA.

RESUMEN

BACKGROUND: Dental caries is a common disease in the oral cavity, and the microorganisms in the cavity are colonized in the form of dental plaque biofilm. Streptococcus mutans is the main pathogen causing dental caries. Using probiotics to inhibit the growth and colonization of pathogenic bacteria, regulate mucosal immunity and improve oral microecological balance is an effective way to prevent or treat dental caries. The aim of this study was to evaluate the caries-prevention of probiotics in vitro and in rat caries models. METHODS: The probiotics used in this study are a combination of 4 strains of bacteria. After the fermentation of 4 strains (L. plantarum, L. salivarius, L. rhamnosus, and L. paracasei) was completed, they were mixed in equal volume proportions and used as samples to be tested. The mixture was then assessed the ability to inhibit the growth of S. mutans in vitro and in vivo. SPSS Statistics 22.0 (SPSS, Inc., Chicago, IL, USA) was used for analysis. RESULTS: In vitro the probiotics mixture could inhibit the growth of S. mutans and was able to remove biofilms formed by S. mutans. In a 42-day in vivo experiment, the probiotics group significantly reduced the level of S. mutans on the tooth surface of rats, reducing more than half the bacterial quantities compared with the caries model group (P < 0.05). The amount of S. mutans in the antagonist group was low and highly significant compared with the caries model group. Moreover, the mixture of 4 strains significantly reduced the caries scores (modified Keyes scoring method) in both the probiotic and antagonist groups (p < 0.05). CONCLUSIONS: The study showed that the combination of the four strains can reduce the cavity scores, and the four strains can be used as products in oral care products. At the same time, the study also suggests that probiotic therapy can be an effective way to prevent dental caries.

Asunto(s)

RESUMEN

Introduction: Chitosan membranes with glycerol can function as an effective dispersing agent for different antibiotics or active ingredients that can be used in the treatment of diseases present in the oral cavity. Methods: The effects of the addition of glycerol on the mechanical, water absorption, swelling, pH, thickness, disintegration, rugosity, and antibacterial properties of chitosan-chlorhexidine- glycerol membranes were investigated in this study. Results and discussion: Mechanical results indicated that chitosan membranes' rugosity, strength, flexion, and thickness differed at loading 1, 3, 5, 10, 15, and 20% of glycerol (p < 0.05). The chitosan membranes' rugosity, dissolution, strength, and pH results were significantly enhanced by the presence of glycerol at 3, 5, and 10% concentrations. In this investigation, the antimicrobial activity model used was the inhibition of Streptococcus mutans CDBB-B-1455 by chitosan-chlorhexidine membranes. It was observed that there was no change in inhibition with different concentrations of glycerol. The results suggest that chitosan-glycerol-chlorhexidine membranes may be a potential candidate for topical antiseptic application in buccal-dental disorders caused by S. mutans, such as caries, periodontal diseases, and oral squamous cell carcinoma, helping to prevent the development of serious conditions that can compromise human health.

RESUMEN

Dental plaque, formed by a Streptococcus mutans biofilm, is a major contributor to cavity formation. While antimicrobial strategies exist, the growing risk of antibiotic resistance necessitates alternative therapeutic solutions. Polyserotonin nanoparticles (PSeNPs), recently recognized for their photothermal property and promising biomedical applications, open up a new avenue for antimicrobial use. Here, we introduced a UV-initiated synthetic route for PSeNPs with improved yield. Using these PSeNPs, a cocktail treatment to reduce the viability of this cavity-causing bacteria was developed. This cocktail comprises an S. mutans-targeting antimicrobial peptide (GH12), an intraspecies competence-stimulating peptide that triggers altruistic cell death in S. mutans, and laser-activated heating of PSeNPs. The "peptide + PSeNP + laser" combination effectively inhibits S. mutans growth in both planktonic and biofilm states. Moreover, the cocktail approach remains effective in reducing the viability of S. mutans in a more virulent dual-species biofilm with Candida albicans. Overall, our results reinforce the utility of a multipronged therapeutic strategy to reduce cariogenic bacteria in the complex model oral biofilm.

Asunto(s)

RESUMEN

Introduction: Streptococcus mutans was the primary pathogenic organism responsible for dental caries. Lonicera japonica flos (LJF) is a traditional herb in Asia and Europe and consumed as a tea beverage for thousands of years. Methods: The inhibitory effect and mechanism of LJF on biofilm formation by S. mutans was investigated. The active extracts of LJF were validated for their inhibitory activity by examining changes in surface properties such as adherence, hydrophobicity, auto-aggregation abilities, and exopolysaccharides (EPS) production, including water-soluble glucan and water-insoluble glucan. Results and discussion: LJF primarily inhibited biofilm formation through the reduction of EPS production, resulting in alterations in cell surface characteristics and growth retardation in biofilm formation cycles. Integrated transcriptomic and untargeted metabolomics analyses revealed that EPS production was modulated through two-component systems (TCS), quorum sensing (QS), and phosphotransferase system (PTS) pathways under LJF stress conditions. The sensing histidine kinase VicK was identified as an important target protein, as LJF caused its dysregulated expression and blocked the sensing of autoinducer II (AI-2). This led to the inhibition of response regulator transcriptional factors, down-regulated glycosyltransferase (Gtf) activity, and decreased production of water-insoluble glucans (WIG) and water-soluble glucans (WSG). This is the first exploration of the inhibitory effect and mechanism of LJF on S. mutans, providing a theoretical basis for the application of LJF in functional food, oral health care, and related areas.

RESUMEN

OBJECTIVE: Streptococcus mutans (S. mutans) is a major contributor to dental caries, with its ability to synthesize extracellular polysaccharides (EPS) and biofilms. The gcrR gene is a regulator of EPS synthesis and biofilm formation. The objectives of this study were to investigate a novel strategy of combining gcrR gene over-expression with dimethylaminohexadecyl methacrylate (DMAHDM), and to determine their in vivo efficacy in reducing caries in rats for the first time. METHODS: Two types of S. mutans were tested: Parent S. mutans; and gcrR gene over-expressed S. mutans (gcrR OE S. mutans). Bacterial minimum inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) were measured with DMAHDM and chlorhexidine (CHX). Biofilm biomass, polysaccharide, lactic acid production, live/dead staining, colony-forming units (CFUs), and metabolic activity (MTT) were evaluated. A Sprague-Dawley rat model was used with parent S. mutans and gcrR OE S. mutans colonization to determine caries-inhibition in vivo. RESULTS: Drug-susceptibility of gcrR OE S. mutans to DMAHDM or CHX was 2-fold higher than that of parent S. mutans. DMAHDM reduced biofilm CFU by 3-4 logs. Importantly, the combined gcrR OE S. mutans+ DMAHDM dual strategy reduced biofilm CFU by 5 logs. In the rat model, the parent S. mutans group had a higher cariogenicity in dentinal (Dm) and extensive dentinal (Dx) regions. The DMAHDM + gcrR OE group reduced the Dm and Dx caries to only 20 % and 0 %, those of parent S. mutans + PBS control group (p < 0.05). The total caries severity of gcrR OE + DMAHDM group was decreased to 51 % that of parent S. mutans control (p < 0.05). SIGNIFICANCE: The strategy of combining S. mutans gcrR over-expression with antibacterial monomer reducing biofilm acids by 97 %, and reduced in vivo total caries in rats by 48 %. The gcrR over-expression + DMAHDM strategy is promising for a wide range of dental applications to inhibit caries and protect tooth structures.

Asunto(s)

RESUMEN

The oral cavity is an excellent place for various microorganisms to grow. Spectrococcus mutans and Spectrococcus sanguinis are Gram-negative bacteria found in the oral cavity as pioneer biofilm formers on the tooth surface that cause caries. Caries treatment has been done with antibiotics and therapeutics, but the resistance level of S. mutans and S. sanguinis bacteria necessitates the exploration of new drug compounds. Black cumin (Nigella sativa Linn.) is known to contain secondary metabolites that have antioxidant, antibacterial, anti-biofilm, anti-inflammatory and antifungal activities. The purpose of this review article is to present data on the potential of Nigella sativa Linn seeds as anti-biofilm. This article will discuss biofilm-forming bacteria, the resistance mechanism of antibiotics, the bioactivity of N. sativa extracts and seed isolates together with the Structure Activity Relationship (SAR) review of N. sativa compound isolates. We collected data from reliable references that will illustrate the potential of N. sativa seeds as anti-biofilm drug.

Asunto(s)

RESUMEN

Understanding the optimal extraction methods for flavonoids from Abelmoschus manihot flowers (AMF) is crucial for unlocking their potential benefits. This study aimed to optimize the efficiency of flavonoid extraction from AMF. After comparing extraction methods, the ultrasonic cell crusher demonstrated superior performance over conventional techniques. Four key factors-solid-to-liquid ratio (1:10 to 1:50 g·mL-1), ethanol concentration (55% to 95%), ultrasonic time (10 to 50 min), and ultrasonic power (5% to 25% of 900 W)-were investigated and normalized using the entropy weight method. This led to a comprehensive evaluation (CE). Optimization of extraction conditions for the ultrasonic cell crusher was achieved through response surface methodology and a deep neural network model, resulting in optimal parameters: ethanol volume fraction of 66%, solid-to-liquid ratio of 1:21 g/mL, extraction efficiency of 9%, and extraction duration of 35 min, yielding a CE value of 23.14 (RSD < 1%). Additionally, the inhibitory effects of the optimized extracts against Streptococcus mutans (S. mutans) were assessed. The results revealed that AMF extract (AMFE) exhibits inhibitory effects on S. mutans, with concomitant inhibition of sucrase and lactate dehydrogenase (LDH). The MIC of AMFE against planktonic S. mutans is 3 mg/mL, with an MBC of 6 mg/mL. Within the concentration range of 1/8 MIC to 2 MIC of AMFE, the activities of sucrase and LDH decreased by 318.934 U/mg prot and 61.844 U/mg prot, respectively. The antioxidant activity of AMFE was assessed using the potassium ferricyanide reduction and phosphomolybdenum methods. Additionally, the effect of AMFE on DPPH, ABTS, and ·OH free radical scavenging abilities was determined. The concentrations at which AMFE exhibited over 90% scavenging rate for ABTS and DPPH free radicals were found to be 0.125 mg/mL and 2 mg/mL, respectively.

Asunto(s)

RESUMEN

Background: Marginal failure at the resin dentin interface promotes biofilm formation, which further leads to secondary caries and hypersensitivity. This likelihood also increases if residual bacteria are present following cavity preparation. In order to achieve a proper biological seal without jeopardizing bonding, efforts were made to functionalize the adhesive system with antibacterial activity. Aim and objectives: To appraise the antibacterial activity of a total-etch adhesive system against S. mutans with and without incorporation of antibiotics Vancomycin and Cefotaxime. Materials and Method: A commercially available 5th-generation total-etch bonding agent (Te-Econorm) was used. S. mutans broth had been standardized and streaked over Muller-Hinton agar culture medium and round wells about 6 mm in diameter were made in the centre of the agar plates. Each experimental group comprised 10 samples, which include: Group 1 - 30µg Cefotaxime, Group 2- 30µg Cefotaxime + Bonding agent, Group 3- 30µg Vancomycin, Group 4- 30µg Vancomycin + Bonding agent, Group 5- Bonding agent, and Group 6- No material. Inoculated culture plates were examined for the zone of inhibition after incubation at 37° C for 24 hours. Results: There was a significant difference in the mean diameter of zone of inhibition (p=0.000), with the maximum exhibited by Group 4, followed by Group 3 and Group 2. The least zone of inhibition was exhibited by Groups 1 and 5. The negative control showed no zone of inhibition. Conclusion: The combination of Vancomycin and bonding agent had superior antibacterial activity against S. mutans in comparison to cefotaxime and bonding agent.

RESUMEN

BACKGROUND: In this study, the antimicrobial activity of three different cleanser tablets on S. mutans and C. albicans adhesion to PMMA, polyamide and 3D printed resin was investigated. METHODS: 40 samples were prepared for PMMA (SR Triplex Hot), polyamide (Deflex) and 3D printed resin (PowerResins Denture) materials and divided into four subgroups for cleansers (Aktident™, Protefix™, Corega™ tablets and distilled water) (n = 5). After the surface preparations were completed, the samples were immersed separately in tubes containing the prepared microorganism suspension and incubated at 37˚C for 24 h. After the incubation, the samples were kept in the cleanser solutions. The samples were then transferred to sterile saline tubes. All the tubes were vortexed and 10 µl was taken from each of them. Sheep blood agar was inoculated for colony counting. The inoculated plates were incubated for 48 h for S. mutans and 24 h for C. albicans. After incubation, colonies observed on all plates were counted. Statistical analyses were done with three-way ANOVA and Tukey's multiple comparison test. RESULTS: Polyamide material registered the highest colony count of S. mutans, whereas PMMA registered the lowest. Significant differences in S. mutans adherence (p = 0.002) were found between the three denture base materials, but no such difference in C. albicans adherence (p = 0.221) was identified between the specimens. All three cleanser tablets eliminated 98% of S. mutans from all the material groups. In all these groups, as well, the antifungal effect of Corega™ on C. albicans was significantly higher than those of the other two cleanser tablets. CONCLUSIONS: According to the study's results, it may be better to pay attention to surface smoothness when using polyamide material to prevent microorganism retention. Cleanser tablets are clinically recommended to help maintain hygiene in removable denture users, especially Corega tablets that are more effective on C. albicans.

Asunto(s)

RESUMEN

To evaluate the anticaries and antigingivitis properties of cannabinoid-containing oral health products. A systematic research strategy was employed. Specific search terms were used, including "Cannabinoids AND dental caries," "Cannabinoids AND oral health," "Cannabinoids AND dental plaque," "Cannabinoids AND gingivitis AND periodontitis," "Cannabinoids AND S. mutans," "Cannabidiol AND oral health," and "Cannabidiol AND oral biofilm." The search was conducted in PubMed, Cochrane, and EBSCO Host databases. The search yielded a total of 73 articles, out of which 15 articles (20.5%) were relevant to the scope of this systematic review. Among the relevant articles, only eight (10.9%) directly addressed the research question. The findings from these articles suggest that cannabinoids have the potential to reduce the metabolism of cariogenic bacteria, specifically Streptococcus mutans, and decrease the number of bacterial colonies in dental plaque. In vitro studies also demonstrated a significant inhibitory effect of cannabinoids on oral biofilms and create a considerable inhibitory zone of growth when investigated on oral biofilms in vitro. Furthermore, CBD exhibited antibacterial properties against Porphyromonas gingivalis, a primary pathogen associated with periodontal disease. The current review shows insufficient data to conclude on the anticaries and antigingivitis effects of cannabinoids. Despite extensive research on their systemic therapeutic benefits, their oral health impact remains underexplored, lacking clinical trials and primary research.

RESUMEN

To incorporate different concentrations of Al2O9Zr3 (1%, 5%, and 10%) nanoparticles (NP) into the ER adhesive and subsequently assess the impact of this addition on the degree of conversion, µTBS, and antimicrobial efficacy. The current research involved a wide-ranging examination that merged various investigative techniques, including the application of scanning electron microscopy (SEM) for surface characterization of NP coupled with energy-dispersive x-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, µTBS testing, and microbial analysis. Teeth were divided into four groups based on the application of modified and unmodified three-step ER adhesive primer. Group 1 (0% Al2O9Zr3 NPs) Control, Group 2 (1% Al2O9Zr3 NPs), Group 3 (5% Al2O9Zr3 NPs), and Group 4 (10% Al2O9Zr3 NPs). EDX analysis of Al2O9Zr3 NPs was performed showing elemental distribution in synthesized NPs. Zirconium (Zr), Aluminum (Al), and Oxides (O2). After primer application, an assessment of the survival rate of Streptococcus mutans was completed. The FTIR spectra were analyzed to observe the characteristic peaks indicating the conversion of double bonds, both before and after the curing process, for the adhesive Etch and rinse containing 1,5,10 wt% Al2O9Zr3 NPs. µTBS and failure mode assessment were performed using a Universal Testing Machine (UTM) and stereomicroscope respectively. The µTBS and S.mutans survival rates comparison among different groups was performed using one-way ANOVA and Tukey post hoc (p = .05). Group 4 (10 wt% Al2O9Zr3 NPs + ER adhesive) specimens exhibited the minimum survival of S.mutans (0.11 ± 0.02 CFU/mL). Nonetheless, Group 1 (0 wt% Al2O9Zr3 NPs + ER adhesive) displayed the maximum surviving S.mutans (0.52 ± 0.08 CFU/mL). Moreover, Group 2 (1 wt% Al2O9Zr3 NPs + ER adhesive) (21.22 ± 0.73 MPa) samples displayed highest µTBS. However, the bond strength was weakest in Group 1 (0 wt% Al2O9Zr3 NPs + ER adhesive) (14.13 ± 0.32 MPa) study samples. The etch-and-rinse adhesive exhibited enhanced antibacterial activity and micro-tensile bond strength (µTBS) when 1% Al2O9Zr3 NPs was incorporated, as opposed to the control group. Nevertheless, the incorporation of Al2O9Zr3 NPs led to a decrease in DC. RESEARCH HIGHLIGHTS: 10 wt% Al2O9Zr3 NPs + ER adhesive specimens exhibited the minimum survival of S.mutans. 1 wt% Al2O9Zr3 NPs + ER adhesive samples displayed the most strong composite/CAD bond. The highest DC was observed in Group 1: 0 wt% Al2O9Zr3 NPs + ER adhesive.

Asunto(s)

RESUMEN

The disruption of periodontal biofilms and prevailing antimicrobial resistance issues continue to pose a great challenge to the treatment of periodontitis. Here, we report on selenium nanoparticles (SeNPs) as a treatment alternative for periodontitis by determining their antibiofilm activity against S. mutans biofilms and the potential role of particle size in disrupting biofilms. SeNPs were synthesised via a reduction reaction. Various physicochemical characterisations were conducted on the NPs, including size and shape. The microbroth dilution method was used to conduct the biofilm and antibiofilm assay against S. mutans, which was analysed by absorbance. SeNPs displayed hydrodynamic sizes as low as 46 ± 4 nm at a volume ratio of 1:5 (sodium selenite/ascorbic acid) with good monodispersity and stability. Hydrodynamic sizes of SeNPs after resuspension in tryptic soy broth supplemented with 2.5% sucrose (TSB + 2.5% suc.) and incubated at 37 °C for 24 h, ranged from 112 to 263 nm, while the zeta potential values increased to greater than -11 mV. The biofilm assay indicated that S. mutans are weakly adherent, bordering on moderately adherent biofilm producers. The minimum biofilm inhibitory concentration (MBIC) was identified at 500 µg/mL. At a 1000 µg/mL concentration, SeNPs were able to inhibit S. mutan biofilms up to 99.87 ± 2.41% at a volume ratio of 1:1. No correlation was found between antibiofilm activity and particle size; however, antibiofilm activity was proven to be concentration-dependant. SeNPs demonstrate antibiofilm activity and may be useful for further development in treating periodontitis.

RESUMEN

Purpose: To investigate the inhibition of Streptococcus mutans (S.mutans) and its biofilm by AgBr-nanoparticles (NP) @CTMAB (cetyltrimethyl-ammonium bromide) and evaluate the changes in Polymethyl methacrylate (PMMA)'s surface roughness (Ra), microhardness, and flexural strength during prolonged immersion in AgBr-NP@CTMAB for application in the denture cleaning industry. Patients and Methods: The antibacterial activity of AgBr-NP@CTMAB against S.mutans was measured colony formation assay, OD600 and laser confocal microscopy. Changes in the specimens' values for surface roughness, microhardness, and flexural strength (MPa) were measured after immersion solutions for 180 or 360 days. Results: The AgBr-NP@CTMAB solution exhibited a robust antibacterial effect on planktonic S. mutans, with a minimum bactericidal concentration of 5 µg/mL. The 10 µg/mL AgBr-NP@CTMAB solution efficiently inhibited S. mutans biofilm formation. (2) No significant difference in surface roughness after immersion in AgBr-NP@CTMAB (10 µg/mL and 20 µg/mL) comparing with distilled water (P > 0.05) and Polident had significantly higher than distilled water (P < 0.05). There was a significant decrease in the surface hardness of the PMMA specimens that were immersed in the Polident compared with those in distilled water (P < 0.05). While, no significant differences in surface hardness after immersion in the AgBr-NP@CTMAB (P > 0.05). The result of flexural strength suggested that there was no statistically significant difference (P < 0.05) between AgBr-NP@CTMAB as well as Polident and water. Conclusion: AgBrNP@CTMAB can efficiently inhibit the growth of plankton S.mutans and biofilm formation, without affecting the flexural strength, microhardness, or surface roughness of PMMA. Therefore, AgBrNP@CTMAB holds promise as a new denture cleaning agent.

Asunto(s)

RESUMEN

OBJECTIVES: To compare the antibacterial effect of Nanosilver Fluoride varnish (NSF) varnish, P11-4 and Sodium Fluoride (NaF) varnish against salivary Streptococcus mutans (S. mutans) and Lactobacilli. METHODS: 66 patients aged 10-24 years old were randomly assigned to receive single application of NSF, P11-4 or NaF varnish. Baseline unstimulated saliva samples were collected before the agents were applied and S.mutans and Lactobacilli colony forming units (CFU) were counted. After one, three and six months, microbiological samples were re-assessed. Groups were compared at each time point and changes across time were assessed. Multivariable linear regression compared the effect of P11-4 and NSF to NaF on salivary S. mutans and Lactobacilli log count at various follow up periods. RESULTS: There was a significant difference in salivary S. mutans log count after 1 month between P11-4 (B= -1.29, p = 0.049) and NaF but not at other time points nor between NSF and NaF at any time point. The significant reduction in bacterial counts lasted up to one month in all groups, to three months after using P11-4 and NaF and returned to baseline values after six months. CONCLUSION: In general, the antimicrobial effect of P11-4 and NSF on salivary S. mutans and Lactobacilli was not significantly different from NaF varnish. P11-4 induced greater reduction more quickly than the two other agents and NSF antibacterial effect was lost after one month. CLINICAL RELEVANCE: NSF varnish and P11-4 have antimicrobial activity that does not significantly differ from NaF by 3 months. P11-4 has the greatest antibacterial effect after one month with sustained effect till 3 months. The antibacterial effect of NSF lasts for one month. NaF remains effective till 3 months. TRIAL REGISTRATION: This trial was prospectively registered on the clinicaltrials.gov registry with ID: NCT04929509 on 18/6/2021.

Asunto(s)

RESUMEN

Air particle abrasion (APA) using bioactive glass (BG) effectively decontaminates titanium (Ti) surface biofilms and the retained glass particles on the abraded surfaces impart potent antibacterial properties against various clinically significant pathogens. The objective of this study was to investigate the effect of BG APA and simulated body fluid (SBF) immersion of sandblasted and acid-etched (SA) Ti surfaces on osteoblast cell viability. Another goal was to study the antibacterial effect against Streptococcus mutans. Square-shaped 10 mm diameter Ti substrates (n = 136) were SA by grit blasting with aluminum oxide particles, then acid-etching in an HCl-H2SO4 mixture. The SA substrates (n = 68) were used as non-coated controls (NC-SA). The test group (n = 68) was further subjected to APA using experimental zinc-containing BG (Zn4) and then mineralized in SBF for 14 d (Zn4-CaP). Surface roughness, contact angle, and surface free energy (SFE) were calculated on test and control surfaces. In addition, the topography and chemistry of substrate surfaces were also characterized. Osteoblastic cell viability and focal adhesion were also evaluated and compared to glass slides as an additional control. The antibacterial effect of Zn4-CaP was also assessed against S. mutans. After immersion in SBF, a mineralized zinc-containing Ca-P coating was formed on the SA substrates. The Zn4-CaP coating resulted in a significantly lower Ra surface roughness value (2.565 µm; p < 0.001), higher wettability (13.35°; p < 0.001), and higher total SFE (71.13; p < 0.001) compared to 3.695 µm, 77.19° and 40.43 for the NC-SA, respectively. APA using Zn4 can produce a zinc-containing calcium phosphate coating that demonstrates osteoblast cell viability and focal adhesion comparable to that on NC-SA or glass slides. Nevertheless, the coating had no antibacterial effect against S. mutans.

RESUMEN

Streptococcus mutans (S. mutans) is the main cariogenic bacterium with acidophilic properties, in part due to its acid-producing and -resistant properties. As a result of this activity, hard tooth structures may demineralize and form caries. Trans-cinnamaldehyde (TC) is a phytochemical from the cinnamon plant that has established antibacterial properties for Gram-positive and -negative bacteria. This research sought to assess the antibacterial and antibiofilm effects of trans-cinnamaldehyde on S. mutans. TC was diluted to a concentration range of 156.25-5000 µg/mL in dimethyl sulfoxide (DMSO) 0.03-1%, an organic solvent. Antibacterial activity was monitored by testing the range of TC concentrations on 24 h planktonic growth compared with untreated S. mutans. The subminimal bactericidal concentrations (MBCs) were used to evaluate the bacterial distribution and morphology in the biofilms. Our in vitro data established a TC MBC of 2500 µg/mL against planktonic S. mutans using a microplate spectrophotometer. Furthermore, the DMSO-only controls showed no antibacterial effect against planktonic S. mutans. Next, the sub-MBC doses exhibited antibiofilm action at TC doses of ≥625 µg/mL on hydroxyapatite discs, as demonstrated through biofilm analysis using spinning-disk confocal microscopy (SDCM) and high-resolution scanning electron microscopy (HR-SEM). Our findings show that TC possesses potent antibacterial and antibiofilm properties against S. mutans. Our data insinuate that the most effective sub-MBC of TC to bestow these activities is 625 µg/mL.

RESUMEN

BACKGROUND: The relationship between the major periodontal bacteria, Porphyromonas gingivalis, and the pathogenesis of IgA nephropathy (IgAN)-particularly with respect to galactose-deficient IgA1 (Gd-IgA1)-has not been fully elucidated. METHODS: Saliva samples from 30 IgAN patients and 44 patients with chronic kidney disease (CKD) were subjected to analysis of P. gingivalis status via polymerase chain reaction using a set of P. gingivalis-specific primers. The associations between P. gingivalis presence and clinical parameters, including plasma Gd-IgA1, were analyzed in each group. RESULTS: Compared with the CKD group, the IgAN group demonstrated significantly higher plasma Gd-IgA1 levels (p < 0.05). Compared with the P. gingivalis-negative subgroup, the P. gingivalis-positive subgroup exhibited significantly higher plasma Gd-IgA1 levels in both IgAN and CKD patients (p < 0.05). Additionally, among IgAN patients, the P. gingivalis-positive subgroup displayed significantly higher plasma Gd-IgA1 and urine protein levels, compared with the P. gingivalis-negative subgroup (p < 0.05). With respect to renal biopsy findings, the frequencies of segmental glomerulosclerosis and tubular atrophy/interstitial fibrosis were significantly greater in the P. gingivalis-positive subgroup than in the P. gingivalis-negative subgroup, according to the Oxford classification of IgAN (p < 0.05). CONCLUSION: Our findings suggest an association between the presence of P. gingivalis in the oral cavity and the pathogenesis of IgAN, mediated by increased levels of Gd-IgA1.

Asunto(s)

RESUMEN

OBJECTIVES: To evaluate the mechanical and antimicrobial properties of boron-containing coating on translucent zirconia (5Y-PSZ). METHODS: 5Y-PSZ discs (Control) were coated with a glaze (Glaze), silver- (AgCoat), or boron-containing (BCoat) glasses. The coatings' antimicrobial potential was characterized using S. mutans biofilms after 48 h via viable colony-forming units (CFU), metabolic activity (CV) assays, and quantification of extracellular polysaccharide matrix (EPS). Biofilm architectures were imaged under scanning electron and confocal laser scanning microscopies (SEM and CLSM). The cytocompatibility was determined at 24 h via WST-1 and LIVE&DEAD assays using periodontal ligament stem cells (PDLSCs). The coatings' effects on properties were characterized by Vickers hardness, biaxial bending tests, and fractography analysis. Statistical analyses were performed via one-way ANOVA, Tukey's tests, Weibull analysis, and Pearson's correlation analysis. RESULTS: BCoat significantly decreased biofilm formation, having the lowest CFU and metabolic activity compared with the other groups. BCoat and AgCoat presented the lowest EPS, followed by Glaze and Control. SEM and CLSM images revealed that the biofilms on BCoat were thin and sparse, with lower biovolume. In contrast, the other groups yielded robust biofilms with higher biovolume. The cytocompatibility was similar in all groups. BCoat, AgCoat, and Glaze also presented similar hardness and were significantly lower than Control. BCoat had the highest flexural strength, characteristic strength and Weibull parameters (σF: 625 MPa; σ0: 620 MPa; m = 11.5), followed by AgCoat (σF: 464 MPa; σ0: 478 MPa; m = 5.3). SIGNIFICANCE: BCoat is a cytocompatible coating with promising antimicrobial properties that can improve the mechanical properties and reliability of 5Y-PSZ.

Asunto(s)