RESUMEN

In this study, we developed a heterojunction photocatalyst, namely nitrogen-doped carbon quantum dots/titanium dioxide (N-CQDs/TiO2), for the effective and sustainable treatment of ciprofloxacin (CIP) antibiotic in aqueous solution. First, N-CQDs were prepared from a chitosan biopolymer with a green, facile, and effective hydrothermal carbonization technique and then anchored on the TiO2 surface via a hydrothermal process. The morphological, structural, and optical properties of the as-prepared materials were characterized by using advanced analytical techniques. The impacts of the mass percentage of N-CQDs, catalyst and CIP concentration, and pH on photocatalytic CIP degradation were investigated in depth. Comparative analyses were performed to evaluate different processes including adsorption, photolysis, and photocatalysis for the removal of CIP with TiO2 and N-CQDs/TiO2. The results revealed that N-CQDs/TiO2 exhibited the highest CIP removal efficiency of up to 83.91% within 120 min using UVA irradiation under optimized conditions (10 mg/L CIP, 0.4 g/L catalyst, and pH 5). Moreover, the carbon source used in the fabrication of N-CQDs was also considered, and lower removal efficiency was obtained when glucose was used as a carbon source instead of chitosan. This excellent improvement in CIP degradation was attributed to the ideal separation and migration of photogenerated carriers, strong redox capability, and high generation of reactive oxygen species provided by the successful construction of the N-CQDs/TiO2 S-scheme heterojunction. Scavenger experiments indicated that h+ and •OH reactive oxygen species were the predominant factors for CIP elimination in water. Overall, this study presents a green synthesis approach for N-CQDs/TiO2 heterojunction photocatalysts using natural materials, demonstrating potential as a cost-effective and efficient method for pharmaceutical degradation in water treatment applications.

RESUMEN

Converting CO2 into CO, CH4, and other hydrocarbons using solar energy presents a viable approach for addressing energy shortages. In this study, photocatalysts with S-deficient WO3/Zn3In2S6 (WO3/VS-ZIS) S-scheme heterojunctions have been successfully synthesized. Under UV-vis light irradiation, 20 %WO3/VS-ZIS demonstrated significantly improved CO2 reduction activity and CH4 selectivity. Detailed characterization and density functional theory (DFT) calculations reveal that the enhanced performance is due to the synergistic optimization of the S-scheme heterojunction and sulfur vacancies (VS) for CO2 reduction. The presence of VS aids in the adsorption and activation of CO2 and enhances the separation of charge carriers. The 2D/2D S-scheme heterostructure assembled with WO3 nanosheets not only accelerates the migration and separation of photoexcited charge carriers but also improves the adsorption of H2O and the formation of VS, thereby increasing the adsorption and activation of CO2 and facilitating the protonation of CO* to produce CH4. This study clarifies the synergistic effect of VS and S-scheme heterostructures in improving photocatalytic performance, offering valuable insights into the photoactivation process of CO2 at VS in S-scheme heterojunctions.

RESUMEN

Sulfate-radical-mediated photocatalysis technology peroxymonosulfate (PMS) activation via visible light irradiation shows great promise for water treatment applications. However, its effectiveness largely depends on the bifunctional performance of photocatalysis and PMS activation provided by the catalysts. In this study, we successfully synthesized a novel S-scheme MoS2/Co3O4 (MC) heterojunction composite by a hydrothermal method and employed it for the first time to activate PMS for ofloxacin (OFX) degradation under visible light irradiation. The MC-5/PMS/Vis system achieved an impressive 85.11% OFX degradation efficiency within 1 min and complete OFX removal within 15 min under optimal conditions, with an apparent first-order kinetics rate constant of 0.429 min-1. Reactive species trapping experiments and electron spin resonance analysis identified 1O2, h+, and •O2- as the primary active species responsible for OFX degradation. Photoelectrochemical analyses and density functional theory calculations indicated the formation of a built-in electric field between MoS2 and Co3O4, which enhanced the separation and migration of photoinduced carriers. Additionally, the Co-Mo interaction further increased the yield of dominant reactive species, thereby boosting photocatalytic activity. This work underscores the potential of visible-light-assisted PMS-mediated photocatalysis using Co3O4-based catalysts for effective pollutant control.

RESUMEN

The MnO2/CN S-scheme heterojunctions were prepared using the hydrothermal method, which significantly promoted periodate (PI) activation for the TC removal. Notably, the MnO2/CN-0.1 achieved a TC removal rate of 79.7 % within 25 min in the PI/Vis system, which was 1.39 and 3.68 times that of MnO2 and g-C3N4, respectively. The improved TC degradation performance could be attributed to the synergetic effect of photothermal effect of MnO2 and the S-scheme heterojunction. On the basis of the infrared thermography images, the photothermal properties of MnO2 could increase temperatures of the reaction system, leading to the promotion of the PI activation. The formation of the MnO2/CN S-scheme not only effectively suppressed charge recombination, but also facilitated the Mn(IV)/Mn(III) redox cycle within the reaction. Under different pH and anion conditions, the MnO2/CN-0.1/PI system exhibited excellent capability in TC removal. Additionally, the toxicity of the degraded solution was evaluated based on the LC-MS test results and the growth experiment of Mung bean seeds. This work put forward an efficient approach on S-scheme photothermal catalysts to achieve efficient utilization of PI on TC degradation, which demonstrates a promising method for photothermal assistance PI activation to remediate the water environment efficiently.

RESUMEN

The key to heterogeneous photo-Fenton technology lies in the efficient generation of hydrogen peroxide (H2O2). Herein, a newly-designed ZnO/ZnIn2S4 composite with heterostructure is synthesized. Benefiting from the formation of built-in electric field, the recombination of photoinduced electrons and holes is suppressed and interfacial charge transfer resistance is reduced. Importantly, the embedding of ZnO in ZnIn2S4 can improve the hydrophobicity and create microscopic three-phase interface, thereby boosting the capture capability for O2 and providing the convenience for the occurrence of O2 reduction reaction. More interestingly, the existence of ZnIn2S4 in the ZnO/ZnIn2S4 composite can reduce the Gibbs free energy (ΔG) of key intermediate (OOH*) formation, which will accelerate the generation of H2O2. As a result, the ZnO/ZnIn2S4 composite displays excellent performance in photocatalytic H2O2 production, and the highest yield was about 897.6 µmol/g/h within 60 min under visible light irradiation. The transfer of photoinduced carriers follows the S-scheme type mechanism. The photogenerated holes can be captured by drug residues (i.e., diclofenac sodium) to accelerate H2O2 production, while generated H2O2 can combine with Fe2+ to construct photo-Fenton system for achieving the advanced degradation of diclofenac sodium, which was mainly related to the formation of OH•. Furthermore, generated H2O2 can be applied for performing the inactivation of pathogenic bacteria. In short, current work will provide a valuable reference for future research.

Asunto(s)

RESUMEN

The construction of heterojunction is an effective and conventional method to improve the photocatalytic activity of photocatalysts. On this basis, how to further regulate the separation and migration of photogenerated carrier is worthy of further investigation. As a mature and efficient modification method, oxygen defect engineering was used to regulate the S-scheme heterojunction composed of AgIO3 and Bi4Ti3O12 to further enhance the photocatalytic activity of the constructed heterojunction in this study. In addition to improving the visible light absorption of the photocatalyst and providing active sites, the introduction of oxygen vacancies can also strengthen the internal electric field between the two semiconductors by expanding the Fermi level gap, which can be verified by Mott-Schottky experiment and DFT calculations, resulting in more efficient photogenerated carrier separation efficiency. As a result, compared with AgIO3/Bi4Ti3O12, the AgIO3/Bi4Ti3O12 heterojunction modulated by oxygen defect engineering exhibited excellent photocatalytic activity, which proves the feasibility of the regulation of the interfacial electric field. This work provides a new idea for the modulation strategy of the interface electric field.

Asunto(s)

RESUMEN

Constructing heterojunction photocatalysts with optimized architecture and components is an effective strategy for enhancing CO2 photoreduction by promoting photogenerated carrier separation, visible light absorption, and CO2 adsorption. Herein, defect-rich photocatalysts (Ni2P@Ce-BDC-CeO2 HOOs) with S-scheme heterojunction and hollowed-out octahedral architecture are prepared by decomposing Ce-BDC octahedrons embedded with Ni2P nanoparticles and subsequent lactic acid etching for CO2 photoreduction. The hollowed-out octahedral architecture with multistage pores (micropores, mesopores, and macropores) and oxygen vacancy defects are simultaneously produced during the preparation process. The S-scheme heterojunction boosts the quick transfer and separation of photoinduced charges. The formed hollowed-out multi-stage pore structure is favorable for the adsorption and diffusion of CO2 molecules and gaseous products. As expected, the optimized photocatalyst exhibits excellent performance, producing CO with a yield of 61.6 µmol h-1 g-1, which is four times higher than that of the original Ce-BDC octahedrons. The X-ray photoelectron spectroscopy, scanning Kelvin probe, and electron spin resonance spectroscopy characterizations confirm the S-schematic charge-transfer route. The key intermediate species during the CO2 photoreduction process are detected by in situ Fourier transform infrared spectroscopy to support the proposed mechanism for CO2 photoreduction. This work presents a synthetic strategy for excellent catalysts with potential prospects in photocatalytic applications.

RESUMEN

The construction of semiconductor heterojunction is an effective way for charge separation in photocatalytic degradation of pollutants. In this study, a novel MoS2@MoO3/(Cu+/g-C3N4) ternary composites (MMCCN) was prepared via a simple calcination method. The as-prepared composites exhibited exceptional performance in activating peroxymonosulfate (PMS) for the degradation of rhodamine B (RhB). The activity testing results indicated that 99.41 % of RhB (10 mg·L-1, 10 mL) was effectively removed by the synergistic effect of composites photocatalyst (0.1 g·L-1) and PMS (0.1 g·L-1) under visible light irradiation for 40 min. Its reaction rate constant exceeded that of Cu+/g-C3N4, MoO3 and MoS2 by a factor of 3.56, 17.30 and 11.73 times, respectively. The crystal structure, band gap and density of states (DOS) of the semiconductors were calculated according to the density functional theory (DFT). Free radical trapping tests and electron spin resonance spectroscopy validated that 1O2, O2- and h+ are primary reactive species participating in the decomposition of RhB. The ternary composites demonstrated good stability and maintained excellent degradation efficiency even across four reaction cycles. Furthermore, the activation mechanism and the intermediates produced during the decomposition course of RhB by MMCCN/PMS/vis system were analyzed and elucidated. A double S-scheme heterojunctions was responsible for efficient separation of photo-induced electron-hole pairs. This work presents a novel method in the construction of double S-scheme heterojunctions for PMS activation which is expected to find wide applications in wastewater treatment and environmental remediation.

RESUMEN

The photocatalytic conversion of CO2 into hydrocarbon fuel holds immense potential for achieving a carbon closed loop and carbon neutrality. Developing efficient photocatalysts plays a pivotal role in enabling the widespread application of photocatalytic CO2 reduction on a large scale. Herein, a novel S-scheme MnWO4/LaTiO2N heterojunction composite is successfully synthesized by a hydrothermal method. This composite catalyst demonstrates excellent photocatalytic activity in the reduction of CO2 to CO and CH4 using water molecules as electron donors under visible light irradiation, and the optimized 30% MnWO4/LaTiO2N composite displays significantly enhanced CO and CH4 yields of 3.94 and 0.81 µmol g-1 h-1, respectively, and the corresponding utilized photoelectron number reaches 14.7 µmol g-1 h-1, which is approximately 7.7 and 12.9 times that of LaTiO2N and MnWO4. The enhancement in photocatalytic activity of the composites can be ascribed to the construction of an S-scheme heterojunction, which exhibits improved charge transfer dynamics, retains the strongest redox capacity, and effectively suppresses back reactions. In situ Fourier-transform infrared imaging provides evidence, to a certain extent, for the existence of a temporal gradient order in the generation of multiple products during the photocatalytic reduction of CO2.

RESUMEN

Photocatalytic degradation of pollutants coupled with hydrogen (H2) evolution has emerged as a promising solution for environmental and energy crises. However, the fast recombination of photoexcited electrons and holes limits photocatalytic activities. Herein, an S-scheme heterojunction carbon doped-TiO2/ZnIn2S4 (C-TiO2/ZnIn2S4) was designed by substituting oxygen sites within C-TiO2 by ZnIn2S4. Under visible light irradiation, the optimal C-TiO2/ZnIn2S4 exhibits a higher degradation efficiency (88.6%) of microcystin-LR (MC-LR), compared to pristine C-TiO2 (72.9%) and ZnIn2S4 (66.8%). Furthermore, the H2 yield of the C-TiO2/ZnIn2S4 reaches 1526.9 µmol g-1 h-1, which is 3.83 times and 2.87 times that of the C-TiO2 and ZnIn2S4, respectively. Experimental and theoretical investigations reveal that an internal electric field (IEF) informed in the C-TiO2/ZnIn2S4 heterojunction, accelerates the separation of photogenerated charge pairs, thereby enhancing photocatalytic efficiency of MC-LR degradation and H2 production. This work highlights a new perspective on the development of high-performance photocatalysts for wastewater treatment and H2 generation.

Asunto(s)

RESUMEN

The environmental contamination caused by organophosphorus pesticides (for example, triazophos) is an escalating concern. To mitigate this issue, this study introduces a novel Al6Si2O13/WO2.72 (ASO/WO) nanocomposite photocatalyst, which markedly enhances the photocatalytic degradation of triazophos. The optimized nanocomposite material with a 60.0 % ASO loading (60-ASO/WO) achieves a degradation rate of 86.3 % for triazophos within 140.0 min, marginally exceeding 60-ASO/WO3 (72.6 %) and significantly outperforming individual ASO (65.0 %), WO (59.5 %), and WO3 (56.2 %). This catalyst retains 88.9 % of its activity after five cycles, showcasing exceptional efficiency and stability. Additionally, its electrochemical surface area (ECSA, 310.0 cm2), total organic carbon (TOC, removal rate of 73.7 %), photocurrent, and electrochemical impedance are all optimal. X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and theoretical calculations elucidate the critical role of oxygen vacancies and the S-scheme heterojunction in augmenting charge separation and photocatalytic performance, corroborating the synergistic effect of oxygen defects and the S-scheme. While individual factors can enhance photocatalytic activity, their combination results in a more pronounced effect. Liquid chromatography-mass spectrometry (LCMS) identifies the principal degradation intermediates, including 1-phenyl-3-hydroxy-1, 2, 4-triazole, diethyl thiophosphate, and 3, 5, 6-trichloro-2-pyridinol, underscoring the material's potential in environmental remediation.

RESUMEN

Photocatalysis has been proven to be an excellent technology for treating antibiotic wastewater, but the impact of each active species involved in the process on antibiotic degradation is still unclear. Therefore, the S-scheme heterojunction photocatalyst Ti3C2/g-C3N4/TiO2 was successfully synthesized using melamine and Ti3C2 as precursors by a one-step calcination method using mechanical stirring and ultrasound assistance. Its formation mechanism was studied in detail through multiple characterizations and work function calculations. The heterojunction photocatalyst not only enabled it to retain active species with strong oxidation and reduction abilities, but also significantly promoted the separation and transfer of photo-generated carriers, exhibiting an excellent degradation efficiency of 94.19 % for tetracycline (TC) within 120 min. Importantly, the priority attack sites, degradation pathways, degradation intermediates and their ecological toxicity of TC under the action of each single active species (·O2-, h+, ·OH) were first positively explored and evaluated through design experiments, Fukui function theory calculations, HPLC-MS, Escherichia coli toxicity experiments, and ECOSAR program. The results indicated that the preferred attack sites of ·O2- on TC were O20, C7, C11, O21, and N25 atoms with high f+ value. The toxicity of intermediates produced by ·O2- was also lower than those produced by h+ and ·OH.

Asunto(s)

RESUMEN

Designing efficient dual-functional catalysts for photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) and photodegradation of dye pollutants is challenging. In this work, we designed and fabricated an S-scheme heterojunction (g-C3N4/ZnO composite photocatalyst) via one-pot calcination of a mixture of ZIF-8 and melamine in the KCl/LiCl molten salt medium. The KCN/ZnO composite produced 4.72 mM of H2O2 within 90 min under illumination (with AM 1.5 filter), which is almost 1.3 and 7.8 times than that produced over KCN and ZnO, respectively. Simultaneously, the KCN/ZnO also showed excellent photodegradation performance for the dye pollutants (Rhodamine B, RhB), with a removal rate of 92 % within 2 h. The apparent degradation rate constant of RhB over KCN/ZnO was approximately 5-8 times that of KCN and ZnO. In the photocatalytic process, photo-generated holes and superoxide radicals are the main active species. Oxygen (O2) was mainly reduced to produce H2O2 via a two-electron (2e-) pathway with superoxide radicals as intermediates and the 2e- oxygen reduction reaction selectivity of KCN/ZnO was close to 69.82 %. Photo-generated holes are mainly responsible for the degradation of RhB. Compared with pure KCN and ZnO, the enhanced photocatalytic activity of the KCN/ZnO composite is mainly attributed to the following aspects: 1) larger specific surface area and pore volume is beneficial to expose more active sites; 2) stronger light harvesting ability and red-shifted absorption edge bestow the compound a stronger light utilization efficiency; 3) the construction of S-scheme heterostructure between KCN and ZnO improve the photogenerated electron-hole pairs separation ability and bestow photogenerated carriers a higher redox potential.

RESUMEN

The research in the field of photocatalysis has progressed, with the development of heterojunctions being recognized as an effective method to improve carrier separation efficiency in light-induced processes. In this particular study, CuCo2S4 particles were attached to a new cubic CdS surface to create an S-scheme heterojunction, thus successfully addressing this issue. Specifically, owing to the higher conduction band and Fermi level of CuCo2S4 compared to CdS, they serve as the foundation and driving force for the formation of an S-scheme heterojunction. Through in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, the direction of charge transfer in the composite photocatalyst under light exposure was determined, confirming the charge transfer mechanism of the S-scheme heterojunction. By effectively constructing the S-scheme heterojunction, the d-band center of the composite photocatalyst was adjusted, reducing the energy needed for electron filling in the anti-bonding energy band, promoting the transfer of photogenerated carriers, and ultimately enhancing the photocatalytic hydrogen production. performance. After optimization, the hydrogen evolution activity of the composite photocatalyst CdS-C/CuCo2S4-3 reached 5818.9 µmol g-1h-1, which is 2.6 times higher than that of cubic CdS (2272.3 µmol g-1h-1) and 327.4 times higher than that of CuCo2S4 (17.8 µmol g-1h-1), showcasing exceptional photocatalytic activity. Electron paramagnetic resonance and in situ X-ray photoelectron spectroscopy have established a theoretical basis for designing and constructing S-scheme heterojunctions, offering a viable method for adjusting the D-band center to enhance the performance of photocatalytic hydrogen evolution.

RESUMEN

The construction of S-scheme heterojunctions, which offers a promising approach for spatially separating photogenerated charge carriers with high redox potentials and multimolecular activation, represents a viable modification strategy in photocatalytic applications. However, the prevalent insufficient contact areas between two components result in low interface charge transfer efficiency, thereby impeding the photocatalytic performance of such heterostructures. Herein, we address this limitation by introducing a unique mCN@mPDIP molecular heterojunction through a pH-triggered molecule self-assembly eutectoid technique, enabling intimate interface contact and promoting highly efficient interfacial charge transfer following an S-scheme mechanism. Consequently, the mCN@mPDIP molecular heterojunction achieves significantly improved charge separation efficiency and higher concentration of active carriers compared to typical bCN-bPDIP bulk heterojunction and nCN/nPDIP nano heterojunction. Combined with the effective sulfide activation on mPDIP sites and O2 activation on mCN sites, the resulting mCN@mPDIP demonstrates outstanding activity in the photocatalytic aerobic oxidation of sulfides into sulfoxides without any redox mediators.

RESUMEN

The efficiency of photocatalytic hydrogen evolution can be significantly enhanced while maintaining cost-effectiveness through the synergistic effect of defect surface engineering and multi-component heterojunctions. The structure and properties of NiCo2O4 nanorods were modified by inducing oxygen vacancies at different temperatures in this study, resulting in improved optical properties and electron adsorption capacity. The presence of oxygen vacancies leads to a reduction in the band gap of NiCo2O4, thereby enhancing electron transport efficiency through band gap engineering. Simultaneously, surface properties undergo changes, and vacancy defects serve as electron trapping centers, facilitating an increased participation of electrons in the hydrogen evolution reaction process. The dodecahedron KMP with a cavity structure is additionally introduced to form an S-scheme heterojunction with NiCo2O4. This establishes a novel mechanism for electron transport, which effectively enhances the separation of electron-hole pairs and improves the redox capacity of the photocatalytic system. The adsorption of intermediates in the hydrogen production process is enhanced through synergistic regulation of d-band centers via surface defect engineering and S-scheme heterojunction. Additionally, this approach improves the separation efficiency of electron-hole pairs and accelerates electron transfer dynamics, significantly enhancing hydrogen production efficiency.

RESUMEN

Enhanced carriers separation on photocatalysts is crucial for improving photocatalytic activity. In this paper, the Co-doped BiVO4/ZnWO4 S-scheme heterojunctions were constructed to induce double internal electric fields (IEFs) for enhancing charges separation and transfer for efficient photocatalytic reduction of CO2. The photocatalytic CO2 reduction efficiencies of the heterojunctions were significantly enhanced as compared with the counterparts. The optimized Co-doped BiVO4/ZnWO4 exhibited the highest CO yield of 138.4 µmol·g-1·h-1, which were 86.5 and 1.4 folds of the BiVO4 and Co-doped BiVO4. Results of X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR), and work function demonstrated that charge transfer path of Co-doped BiVO4/ZnWO4 conformed to S-scheme heterojunction mechanism. The kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations of the differential charge distributions confirmed the existence of double IEFs, which accelerated carrier separation and improved CO2 adsorption and activation. In addition, in-situ Fourier transform infrared spectroscopy (ISFT-IR) revealed that HCOO- was the major intermediate during the CO2 reaction. This study provides a feasible means to develop composite photocatalysts with dual IEFs for effective photocatalytic CO2 reduction.

RESUMEN

Photocatalytic N2 reduction reaction (PNRR) offers a promising strategy for sustainable production of ammonia (NH3). However, the reported photocatalysts suffer from low efficiency with great room to improve regarding the charge carrier utilization and active site engineering. Herein, a porous and chemically bonded heterojunction photocatalyst is developed for efficient PNRR to NH3 production via hybridization of two semiconducting metal-organic frameworks (MOFs), MIL-125-NH2 (MIL=Material Institute Lavoisier) and Co-HHTP (HHTP=2,3,6,7,10,11-hexahydroxytripehenylene). Experimental and theoretical results demonstrate the formation of Ti-O-Co chemical bonds at the interface, which not only serve as atomic pathway for S-scheme charge transfer, but also provide electron-deficient Co centers for improving N2 chemisorption/activation capability and restricting competitive hydrogen evolution. Moreover, the nanoporous structure allows the transportation of reactants to the interfacial active sites at heterojunction, enabling the efficient utilization of charge carriers. Consequently, the rationally designed MOF-based heterojunction exhibits remarkable PNRR performance with an NH3 production rate of 2.1 mmol g-1 h-1, an apparent quantum yield (AQY) value of 16.2% at 365 nm and a solar-to-chemical conversion (SCC) efficiency of 0.28%, superior to most reported PNRR photocatalysts. Our work provides new insights into the design principles of high-performance photocatalysts.

RESUMEN

Two-dimensional/two-dimensional (2D/2D) heterojunctions are considered to be an effective strategy for forming strong interface effects and facilitating photogenerated carrier separation. However, it is usually limited by the size mismatch of the materials, even at the expense of its redox capability. Herein, 2D/2D S-scheme heterojunction photocatalyst Bi2MoO6/Zn-TCPP (BMO/ZTP) composed of 2D Bi2MoO6 and 2D Zn-TCPP (TCPP: tetrakis (4-carboxyphenyl) porphyrin) (MOFs) was constructed by in-situ self-assembly growth strategy. The size-compatible 2D/2D composites had abundant surface active sites and strong interactions. In addition, band bending and interfacial electric field (IEF) effect based on S-scheme heterojunction could accelerate the separation and migration of photogenerated carriers in BMO/ZTP. The best hydrogen precipitation rate of the BMO/ZTP was 10900.94 umol·g-1·h-1, which was 38.90 and 3.24 times higher than that of Bi2MoO6 (280.26 umol·g-1·h-1) and Zn-TCPP (3360.34 umol·g-1·h-1), respectively. The results indicated that 2D/2D BMO/ZTP S-scheme heterojunction could enhance the interface effect and retain strong reducing electrons to achieve efficient photocatalytic hydrogen production, which was confirmed by ultraviolet photoelectron spectroscopy (UPS), Tafel curve, electron spin resonance (ESR) and time-resolved photoluminescence (TRPL) characterization and density functional theory (DFT) calculations. This work provided a general strategy for constructing 2D Bi2MoO6 and 2D MOFs S-scheme heterojunctions to enhance interface effects for achieving efficient photocatalytic hydrogen production.

RESUMEN

Enhancing the velocity of the oxidation-reduction cycle is crucial for improving the catalytic efficiency of Fenton processes. Therefore, the development of an effective strategy for wastewater degradation at low temperatures is essential. In this context, we present the preparation of an NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. Specifically, CuInS2 nanoparticles are introduced onto the Ferro-organic skeleton, resulting in the exposure of a significant number of active surface sites. Furthermore, NH2-MIL-88B (Fe)/CuInS2 demonstrates an extended photoresponse into the long-wavelength region, which contributes to its excellent photothermal properties. Notably, the degradation rate of tetracycline in low-temperature aqueous environments reaches as high as 99.7 %, several times higher than that of the original sample. Additionally, the hydrogen production of NH2-MIL-88B (Fe)/CuInS2 is 2.23 times that of single NH2-MIL-88B (Fe) and 3.46 times that of single CuInS2. Moreover, the system exhibits good H2O2 evolution performance, forming an efficient photo-Fenton system. The charge transfer process in S-scheme heterojunction is confirmed using in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance. Both transient photoluminescence and photo electrochemical tests further validate the enhanced photoelectrochemical properties of the NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. The exceptional performance of this system can be attributed to the synergistic effects of the S-scheme heterojunction and the bimetallic codoped photo-Fenton system. This research presents a novel approach for the breakdown of low-temperature wastewater using an improved photocatalytic Fenton system.