RESUMEN
Solar cells (PSCs) with quasi-2D Ruddlesden-Popper perovskites (RPP) exhibit greater environmental stability than 3D perovskites; however, the low power conversion efficiency (PCE) caused by anisotropic crystal orientations and defect sites in the bulk RPP materials limit future commercialization. Herein, a simple post-treatment is reported for the top surfaces of RPP thin films (RPP composition of PEA2 MA4 Pb5 I16
RESUMEN
2D Ruddlesden-Popper (2D RP) perovskite, with attractive environmental and structural stability, has shown great application in perovskite solar cells (PSCs). However, the relatively inferior photovoltaic efficiencies of 2D PSCs limit their further application. To address this issue, ß-âfluorophenylethanamine (ß-âFPEA) as a novel spacer cation is designed and employed to develop stable and efficient quasi-2D RP PSCs. The strong dipole moment of the ß-âFPEA enhances the interactions between the cations and [PbI6 ]4- octahedra, thus improving the charge dissociation of quasi-2D RP perovskite. Additionally, the introduction of the ß-âFPEA cation optimizes the energy level alignment, improves the crystallinity, stabilizes both the mixed phase and a-FAPbI3 phase of the quasi-2D RP perovskite film, prolongs the carrier diffusion length, increases the carrier lifetime and decreases the trap density. By incorporating the ß-âFPEA, the quasi-2D RP PSCs exhibit a power conversion efficiency (PCE) of 16.77% (vs phenylethylammonium (PEA)-based quasi-2D RP PSCs of 12.81%) on PEDOT:PSS substrate and achieve a champion PCE of 19.11% on the PTAA substrate. It is worth noting that the unencapsulated ß-âFPEA-based quasi-2D RP PSCs exhibit considerably improved thermal and moisture stability. These findings provide an effective strategy for developing novel spacer cations for high-performance 2D RP PSCs.
RESUMEN
Ruddlesden-Popper halide perovskites are highly versatile quasi-two-dimensional energy materials with a wide range of tunable optoelectronic properties. Here we use the all-inorganic Csn+1PbnX3n+1Ruddlesden-Popper perovskites with X = I, Br, and Cl to systematically model the effect of octahedral tilting distortions on the energy landscape, band gaps, macroscopic polarization, and the emergence of Rashba-/Dresselhaus splitting in these materials. We construct all uniquen = 1 andn = 2 structures following from octahedral tilts and use first-principles density functional theory to calculate total energies, polarizations and band structures, backed up by band gap calculations using theGWapproach. Our results provide design rules for tailoring structural distortions and band-structure properties in all-inorganic Ruddlesden-Popper perovskites through the interplay of the amplitude, direction, and chemical character of the antiferrodistortive distortion modes contributing to each octahedral tilt pattern. Our work emphasizes that, in contrast to three-dimensional perovskites, polar structures may arise from a combination of octahedral tilts, and Rashba-/Dresselhaus splitting in this class of materials is determined by the direction and Pb-I orbital contribution of the polar distortion mode.
RESUMEN
2D Ruddlesden-Popper perovskites (PVKs) have recently shown overwhelming potential in various optoelectronic devices on account of enhanced stability to their 3D counterparts. So far, regulating the phase distribution and orientation of 2D perovskite thin films remains challenging to achieve efficient charge transport. This work elucidates the balance struck between sufficient gradient sedimentation of perovskite colloids and less formation of small-n phases, which results in the layered alignment of phase compositions and thus in enhanced photoresponse. The solvent engineering strategy, together with the introduction of poly(3,4-ethylene-dioxythiophene):polystyrene sulfonate (PEDOT:PSS) and PC71 BM layer jointly contribute to outstanding self-powered performance of indium tin oxide/PEDOT:PSS/PVK/PC71 BM/Ag device, with a photocurrent of 18.4 µA and an on/off ratio up to 2800. The as-fabricated photodetector exhibits high sensitivity characteristics with the peak responsivity of 0.22 A W-1 and the detectivity up to 1.3 × 1012 Jones detected at UV-A region, outperforming most reported perovskite-based UV photodetectors and maintaining high stability over a wide spectrum ranging from UV to visible region. This discovery supplies deep insights into the control of ordered phases and crystallinity in quasi-2D perovskite films for high-performance optoelectronic devices.
RESUMEN
Quasi-2D Ruddlesden-Popper (RP) perovskites with superior stability are admirable candidates for perovskite solar cells (PSCs) toward commercialization. However, the device performance remains unsatisfactory due to the disordered crystallization of perovskites. In this work, the effects of sulfonium cations on the evolution of intermediates and photovoltaic properties of 2D RP perovskites are investigated. The introduction of sulfonium cations leads to preferred intermediate transformation and improved film quality of perovskites. The resulting devices deliver a champion efficiency of 19.08% at room temperature and 20.52% at 180 K, due to reduced recombination and enhanced charge transport. More importantly, the unencapsulated device maintains 84% of the initial efficiency under maximum power point (MPP) tracking at 40 °C for 1000 h. This work helps to gain a comprehensive understanding of the crystallization process of quasi-2D perovskites and provides a simple strategy to modulate the intermediates of perovskites.
RESUMEN
Quasi 2D perovskite solar cells (PSCs) are promising light absorbers that overcome the inherent instabilities of 3D perovskites. High-performance and stable 2D PSCs require careful control over the crystallographic orientation and phase distribution. This study introduces a simple and universal bifacial stamping method to obtain highly oriented perovskite crystals with a reverse-graded structure, where the low-n-value 2D perovskite phases are located mainly at the film surfaces. Bifacial stamping of 3D perovskite films atop the 2D films enables incorporation of 2D spacer cations into the 3D film surfaces, forming reverse-graded quasi-2D perovskite films. During stamping, suppressed evaporation of the precursor solvent induces heterogeneous nucleation from the contact interface between the 2D and 3D films, resulting in well-crystallized perovskite films having out-of-plane alignments with respect to the substrate. Thus, a highly oriented and reverse-graded quasi-2D perovskite with an average n value of 18 is obtained with power conversion efficiency exceeding 17% and high open-circuit voltage of 1.11 V for iso-butylammonium (iso-BA)-based (iso-BA2 MAn -1 Pbn I3 n +1 ) PSCs. The unencapsulated device retains 92% of its initial efficiency after aging at 40 ± 5% relative humidity for 1200 h. This work provides a new strategy for fabricating highly oriented and phase-controlled quasi-2D PSCs.
RESUMEN
Lead halide perovskite nanocrystals are highly attractive for next-generation optoelectronics because they are easy to synthesize and offer great compositional and morphological tunability. However, the replacement of lead by tin for sustainability reasons is hampered by the unstable nature of Sn2+ oxidation state and by an insufficient understanding of the chemical processes involved in the synthesis. Here, an optimized synthetic route is demonstrated to obtain stable, tunable, and monodisperse CsSnI3 nanocrystals, exhibiting well-defined excitonic peaks. Similar to lead halide perovskites, these nanocrystals are prepared by combining a precursor mixture of SnI2 , oleylamine, and oleic acid, with a Cs-oleate precursor. Among the products, nanocrystals with 10 nm lateral size in the γ-orthorhombic phase prove to be the most stable. To achieve such stability, an excess of precursor SnI2 as well as substoichiometric Sn:ligand ratios are key. Structural, compositional, and optical investigations complemented by first-principle density functional theory calculations confirm that nanocrystal nucleation and growth follow the formation of (R-NH3 + )2 SnI4 nanosheets, with R = C18 H35 . Under specific synthetic conditions, stable mixtures of 3D nanocrystals CsSnI3 and 2D nanosheets (Ruddlesden-Popper (R-NH3 + )2 Csn -1 Snn I3 n +1 with n > 1) are obtained. These results set a path to exploiting the high potential of Sn halide perovskite nanocrystals for opto-electronic applications.
RESUMEN
The use of ferroelectric materials for light-harvesting applications is a possible solution for increasing the efficiency of solar cells and photoelectrocatalytic devices. In this work, we establish a fully autonomous computational workflow to identify light-harvesting materials for water splitting devices based on properties such as stability, size of the band gap, position of the band edges, and ferroelectricity. We have applied this workflow to investigate the Ruddlesden-Popper perovskite class and have identified four new compositions, which show a theoretical efficiency above 5%.
RESUMEN
In recent years, 2D Ruddlesden-Popper (2DRP) perovskite materials have been explored as emerging semiconductor materials in solar cells owing to their excellent stability and structural diversity. Although 2DRP perovskites have achieved photovoltaic efficiencies exceeding 19%, their widespread use is hindered by their inferior charge-carrier transport properties in the presence of diverse organic spacer cations, compared to that of traditional 3D perovskites. Hence, a systematic understanding of the carrier transport mechanism in 2D perovskites is critical for the development of high-performance 2D perovskite solar cells (PSCs). Here, the recent advances in the carrier behavior of 2DRP PSCs are summarized, and guidelines for successfully enhancing carrier transport are provided. First, the composition and crystal structure of 2DRP perovskite materials that affect carrier transport are discussed. Then, the features of 2DRP perovskite films (phase separation, grain orientation, crystallinity kinetics, etc.), which are closely related to carrier transport, are evaluated. Next, the principal direction of carrier transport guiding the selection of the transport layer is revealed. Finally, an outlook is proposed and strategies for enhancing carrier transport in high-performance PSCs are rationalized.
RESUMEN
Owing to their insufficient light absorption and charge transport, 2D Ruddlesden-Popper (RP) perovskites show relatively low efficiency. In this work, methylammonium (MA), formamidinum (FA), and FA/MA mixed 2D perovskite solar cells (PSCs) are fabricated. Incorporating FA cations extends the absorption range and enhances the light absorption. Optical spectroscopy shows that FA cations substantially increase the portion of 3D-like phase to 2D phases, and X-ray diffraction (XRD) studies reveal that FA-based 2D perovskite possesses an oblique crystal orientation. Nevertheless, the ultrafast interphase charge transfer results in an extremely long carrier-diffusion length (≈1.98 µm). Also, chloride additives effectively suppress the yellow δ-phase formation of pure FA-based 2D PSCs. As a result, both FA/MA mixed and pure FA-based 2D PSCs exhibit a greatly enhanced power conversion efficiency (PCE) over 20%. Specifically, the pure FA-based 2D PSCs achieve a record PCE of 21.07% (certified at 20%), which is the highest efficiency for low-dimensional PSCs (n ≤ 10) reported to date. Importantly, the FA-based 2D PSCs retain 97% of their initial efficiency at 85 °C persistent heating after 1500 h. The results unambiguously demonstrate that pure-FA-based 2D PSCs are promising for achieving comparable efficiency to 3D perovskites, along with a better device stability.
RESUMEN
Perovskite light-emitting diodes (PeLEDs) have recently shown significant progress with external quantum efficiencies (EQEs) exceeding 20%. However, PeLEDs with pure-red (620-660 nm) light emission, an essential part for full-color displays, remain a great challenge. Herein, a general approach of spacer cation alloying is employed in Ruddlesden-Popper perovskites (RPPs) for efficient red PeLEDs with precisely tunable wavelengths. By simply tuning the alloying ratio of dual spacer cations, the thickness distribution of quantum wells in the RPP films can be precisely modulated without deteriorating their charge-transport ability and energy funneling processes. Consequently, efficient PeLEDs with tunable emissions between pure red (626 nm) and deep red (671 nm) are achieved with peak EQEs up to 11.5%, representing the highest values among RPP-based pure-red PeLEDs. This work opens a new route for color tuning, which will spur future developments of pure-red or even pure-blue PeLEDs with high performance.
RESUMEN
Highly efficient and stable quasi-2D hybrid perovskite solar cells (PSCs) using hydrophobic 4-(trifluoromethyl) benzylamine (4TFBZA) as the spacer cation are successfully demonstrated. It is found that the incorporation of hydrophobic 4TFBZA into MAPbI3 can effectively induce a spontaneous upper gradient 2D (SUG-2D) structure, passivate the trap states, and restrain the ion motion. Meanwhile, the strong hydrogen bonding of F···HN between 4TFBZA ions and methylamine ions can effectively suppress the decomposition of perovskite, which gives the device a better thermal stability. Besides, due to the SUG-2D structure with hydrophobic 4TFBZA, the device also exhibits a better moisture stability. The SUG-2D-structure-based device exhibits a power conversion efficiency of 17.07% with a high open-circuit voltage of 1.10 V and a notable fill factor of 71%. This work provides a new strategy for constructing efficient and stable quasi-2D PSCs, and it is an inspiration for the packaging strategy of perovskites.
RESUMEN
Organic-inorganic layered perovskites, or Ruddlesden-Popper perovskites, are two-dimensional quantum wells with layers of lead-halide octahedra stacked between organic ligand barriers. The combination of their dielectric confinement and ionic sublattice results in excitonic excitations with substantial binding energies that are strongly coupled to the surrounding soft, polar lattice. However, the ligand environment in layered perovskites can significantly alter their optical properties due to the complex dynamic disorder of the soft perovskite lattice. Here, we infer dynamic disorder through phonon dephasing lifetimes initiated by resonant impulsive stimulated Raman photoexcitation followed by transient absorption probing for a variety of ligand substitutions. We demonstrate that vibrational relaxation in layered perovskite formed from flexible alkyl-amines as organic barriers is fast and relatively independent of the lattice temperature. Relaxation in layered perovskites spaced by aromatic amines is slower, although still fast relative to bulk inorganic lead bromide lattices, with a rate that is temperature dependent. Using molecular dynamics simulations, we explain the fast rates of relaxation by quantifying the large anharmonic coupling of the optical modes with the ligand layers and rationalize the temperature independence due to their amorphous packing. This work provides a molecular and time-domain depiction of the relaxation of nascent optical excitations and opens opportunities to understand how they couple to the complex layered perovskite lattice, elucidating design principles for optoelectronic devices.
RESUMEN
We present an ab-initio study performed in the framework of density functional theory, group-subgroup symmetry analysis and lattice dynamics, to probe the octahedral distortions, which occur during the structural phase transitions of the quasi-2D layered perovskite Sr3Hf2O7 compound. Such a system is characterized by a high-temperature I4/mmm centrosymmetric structure and a ground-state Cmc21 ferroelectric phase. We have probed potential candidate polymorphs that may form the I4/mmm â Cmc21 transition pathways, namely Fmm2, Ccce, Cmca and Cmcm. We found that the band gap widths increase as the symmetry decreases, with the ground-state structure presenting the largest gap width (â¼5.95 eV). By probing the Partial Density of States, we observe a direct relation regarding the tilts and rotations of the oxygen perovskite cages as the transition occurs; these show large variations mostly of the O p-states which contribute mostly to the valence band maximum. Moreover, by analyzing the hyperfine parameters, namely the Electric Field Gradients and asymmetric parameters, we observe variations as the transition occurs, from which it is possible to identify the most plausible intermediate phases. We have also computed the macroscopic polarization and confirm that the Cmc21 phase is ferroelectric with a value of spontaneous polarization of 0.0478 C/m2. The ferroelectricity of the ground-state Cmc21 system arises due to a second order parameter related to the coupling of the rotation and tilts of the O perovskite cages together with the Sr displacements.
RESUMEN
Tailoring the organic spacing cations enables developing new Ruddlesden-Popper (RP) perovskites with tunable optoelectronic properties and superior stabilities. However, the formation of highly crystallized RP perovskites can be hindered when the structure of organic cations become complex. Strategies to regulate crystal growing process and grains quality remain to be explored. In this study, mixing Rb+ ions in precursor solution is reported to significantly promote the crystallinity of phenylethylammonium (PEA+) based RP perovskites without impacting on the major orientation of perovskite grains, which leads to increased power conversion efficiencies from 12.5% to 14.6%. It is found that the added Rb+ ions prefer to accumulate at crystal growing front and form Rb+ ions-rich region, which functions as mild crystal growth inhibitor to retard the absorption and diffusion of organic cations at growing front and hence regulates crystal growing rate. The retarded crystal growth benefits PEA-based RP perovskite films with elevated crystal qualities and prolonged carrier recombination lifetimes. Similar increased crystallinity and photovoltaic performance are achieved in other RP perovskites with non-linear organic cations such as phenylmethylammonium (PMA+), 1-(2-naphthyl)-methanammoniun (NMA+) by adding Rb+ ions, demonstrating using a small amount of growth inhibitor as a general route to regulate crystal growth.
RESUMEN
Two-dimensional (2D) perovskites have proved to be promising semiconductors for photovoltaics, photonics, and optoelectronics. Here, a strategy is presented toward the realization of highly efficient, sub-bandgap photodetection by employing excitonic effects in 2D Ruddlesden-Popper-type halide perovskites (RPPs). On near resonance with 2D excitons, layered RPPs exhibit degenerate two-photon absorption (D-2PA) coefficients as giant as 0.2-0.64 cm MW- 1 . 2D RPP-based sub-bandgap photodetectors show excellent detection performance in the near-infrared (NIR): a two-photon-generated current responsivity up to 1.2 × 104 cm2 W-2 s-1 , two orders of magnitude greater than InAsSbP-pin photodiodes; and a dark current as low as 2 pA at room temperature. More intriguingly, layered-RPP detectors are highly sensitive to the light polarization of incoming photons, showing a considerable anisotropy in their D-2PA coefficients (ß[001] /ß[011] = 2.4, 70% larger than the ratios reported for zinc-blende semiconductors). By controlling the thickness of the inorganic quantum well, it is found that layered RPPs of (C4 H9 NH3 )2 (CH3 NH3 )Pb2 I7 can be utilized for three-photon photodetection in the NIR region.
RESUMEN
Low-dimensional Ruddlesden-Popper perovskites (RPPs) exhibit excellent stability in comparison with 3D perovskites; however, the relatively low power conversion efficiency (PCE) limits their future application. In this work, a new fluorine-substituted phenylethlammonium (PEA) cation is developed as a spacer to fabricate quasi-2D (4FPEA)2 (MA)4 Pb5 I16 (n = 5) perovskite solar cells. The champion device exhibits a remarkable PCE of 17.3% with a Jsc of 19.00 mA cm-2 , a Voc of 1.16 V, and a fill factor (FF) of 79%, which are among the best results for low-dimensional RPP solar cells (n ≤ 5). The enhanced device performance can be attributed as follows: first, the strong dipole field induced by the 4-fluoro-phenethylammonium (4FPEA) organic spacer facilitates charge dissociation. Second, fluorinated RPP crystals preferentially grow along the vertical direction, and form a phase distribution with the increasing n number from bottom to the top surface, resulting in efficient charge transport. Third, 4FPEA-based RPP films exhibit higher film crystallinity, enlarged grain size, and reduced trap-state density. Lastly, the unsealed fluorinated RPP devices demonstrate superior humidity and thermal stability. Therefore, the fluorination of the long-chain organic cations provides a feasible approach for simultaneously improving the efficiency and stability of low-dimensional RPP solar cells.
RESUMEN
2D Ruddlesden-Popper perovskites (RPPs) have aroused growing attention in light harvesting and emission applications owing to their high environmental stability. Recently, coherent light emission of RPPs was reported, however mostly from inhomologous thin films that involve cascade intercompositional energy transfer. Lasing and fundamental understanding of intrinsic laser dynamics in homologous RPPs free from intercompositional energy transfer is still inadequate. Herein, the lasing and loss mechanisms of homologous 2D (BA)2 (MA)n -1 Pbn I3 n +1 RPP thin flakes mechanically exfoliated from the bulk crystal are reported. Multicolor lasing is achieved from the large-n RPPs (n ≥ 3) in the spectral range of 620-680 nm but not from small-n RPPs (n ≤ 2) even down to 78 K. With decreasing n, the lasing threshold increases significantly and the characteristic temperature decreases as 49, 25, and 20 K for n = 5, 4, and 3, respectively. The n-engineered lasing behaviors are attributed to the stronger Auger recombination and exciton-phonon interaction as a result of the enhanced quantum confinement in the smaller-n perovskites. These results not only advance the fundamental understanding of loss mechanisms in both inhomologous and homologous RPP lasers but also provide insights into developing low-threshold, substrate-free, and multicolor 2D semiconductor microlasers.
RESUMEN
Ruddlesden-Popper perovskites (RPPs), consisting of alternating organic spacer layers and inorganic layers, have emerged as a promising alternative to 3D perovskites for both photovoltaic and light-emitting applications. The organic spacer layers provide a wide range of new possibilities to tune the properties and even provide new functionalities for RPPs. However, the preparation of state-of-the-art RPPs requires organic ammonium halides as the starting materials, which need to be ex situ synthesized. A novel approach to prepare high-quality RPP films through in situ formation of organic spacer cations from amines is presented. Compared with control devices fabricated from organic ammonium halides, this new approach results in similar (and even better) device performance for both solar cells and light-emitting diodes. High-quality RPP films are fabricated based on different types of amines, demonstrating the universality of the approach. This approach not only represents a new pathway to fabricate efficient devices based on RPPs, but also provides an effective method to screen new organic spacers with further improved performance.
RESUMEN
Materials with large optical nonlinearity, especially in the visible spectral region, are in great demand for applications in all-optical information processing and quantum optics. 2D hybrid Ruddlesden-Popper-type halide perovskites (RPPs) with tunable ultraviolet-to-visible direct bandgaps exhibit large nonlinear optical responses due to the strong excitonic effects present in their multiple quantum wells. Using a microscopic Z-scan setup with femtosecond laser pulses tunable across the visible spectrum, it is demonstrated that single-crystalline lead halide RPP nanosheets possess unprecedentedly large nonlinear refraction and absorption coefficients near excitonic resonances. A room-temperature insulator (exciton)-metal (plasma) Mott transition is found to occur near the exciton resonance of the thinnest qunatum-well RPPs, boosting the nonlinear response. Owing to the rapidly changing refractive index near resonance, a single RPP crystal can exhibit different nonlinear functionalities across the excitation spectrum. The results suggest that RPPs are efficient nonlinear materials in the visible waveband, indicating their potential use in integrated nonlinear photonic applications such as optical modulation and switching.